Setup DHCP on OES2 Linux for Avaya 5610 phones

I'm trying to setup DHCP on a OES2 Linux server and can't seem to get the phones working. PC on the network will get addresses but the phones will freeze/lock up on DHCP.
My network is as follows:
10.10.1.x(vlan=101) = data
10.10.2.x(vlan=102) = voice
10.1.10.x = servers
Novell servers running on SLES 10 SP2 x64 with OES2 SP 3 x64
I've created a dhcp service (dhcpsrvs) and 2 subnets (10.10.1.0 and 10.10.2.0) and a pool in each subnet (datapool and voicepool). In the global options I created a string option called SSON176. In the options for subnet 10.10.1.0 I've added option 176 with params L2Q=1,L2QVLAN=102. In the options for subnet 10.10.2.0 I've added 176 with params L2Q=1,L2QVLAN=102,MCIPADD=10.10.2.1,MCPORT=1719.
I've been able to get it working on a Win2k3 server but that server was a temporary quick fix. I need to bring that server down soon and would like to get it working on my Novell server.
Can someone help me figure out what I've done wrong or left out?
dlb

danielb,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

How to setup in-process report server 11g on linux for destype=printer

Currently, I'm facing following error when send RDF report directly on printer with destype=printer using run_report_object built-in
REP-50159: The report generated successfully but distribution to destinations failed.
REP-50157: Destination ID TESTREP failed with error An error occurred while sending the file to printer \\hostname\printername. Exit with error code 1..
When i check on report server cache PDF file is generated /wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf but job not go to printer as mention in trace rwlpr.trc file output below.
Note: rwlpr.trc file generated by following 268295.1
==============================================================
XAUTHORITY=/tmp/.gdmT93JDW
_=/usr/bin/env
Parameters : -P "\\askit\PRN01F8" -#1 "/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf"
+ '[' '!' 4 -gt 0 ']'
+ '[' -P = -help ']'
++ uname -s
+ '[' Linux = HP-UX ']'
+ PRNCMDS='lpr lp'
+ for CMD in '$PRNCMDS'
++ which lpr
++ grep lpr
+ PRNCMDPATH=/usr/bin/lpr
+ '[' '!' -x /usr/bin/lpr ']'
+ '[' -x /usr/bin/lpr ']'
++ basename /usr/bin/lpr
+ '[' lpr = lpr ']'
++ uname -s
+ '[' Linux = Linux ']'
++ echo -P '"\\askit\PRN01F8"' -#1 '"/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf"'
++ tr -d '"'
+ /usr/bin/lpr -P '\\askit\PRN01F8' -#1 '/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf'
/usr/bin/lpr: The printer or class was not found.
+ exit 1
=============================================================
I didn't do any configuration in Enterprise Manager for Printer Configuration. Is this the reason? Is any thing I missed out?
Environment Setup:
Server Side:
Oracle Linux 5 (No printer is setup)
Oracle Weblogic Server 10.3.6
Oracle FMW Forms and Report 11.1.2
Configure: In-Process Report Server
Client Side:
Window 7
Printer: Default network printer set with client
Best Regards,
Fani

Hi,
the first thing you need to check is if you are able to print from the OS using the same lpr command that reports is using and using the printer queue being used when you submitted the report request.
Try to print any file from command line using lpr and your print queue \\askit\PRN01F8. If this does not work then that needs to be fixed from the OS standpoint before running report to printer.
Hope it helps
Regards, RZ

Hardening Linux for Oracle 10g

I have been working on creating a bare-bones RHEL 5 installation which will act as an Oracle 10g database server. For hardening Linux, I have restricted to a bare minimum of packages to make it more secure. This installation did not have X-Windows, Gnome/KDE and a host of other services that will not be required on Production servers. I selected only the BASE installation which was further customized to include just the following (there is scope to trim this further, so feedback is welcome):
NetworkManager
readahead
smartmontools
yum-updatesd
irqbalance
acpid
crash
cryptsetup-luks
dos2unix
dump
finger
gnugpg
ksh
libaio
logwatch
m2crypto
man-pages
mdadm
nano
numactl
openssh-clients
openssh-servers
pam_ccreds
pam_krb5
pam_passwdqc
sendmail
setuptools
stunnel
sudo
symlinks
system-config-network
tree
unix2dos
unzip
vconfig
wget
which
yum
yum-rhn-plugin
yum-security
zip
Since I do not intend to use nfs, nis, samba – associated packages were not included. Further hardening was achieved by deleting non-required services (kudzu, avahi, gpm, atd, netfs, ip6tables).
The challenge comes when I begin setting up Oracle 10g using the oracle validated rpm method. In an attempt to resolve dependencies, YUM ends up installing 70 packages that do not apparently seem to have anything to do with an RDBMS (sound libraries, Gnome, X libraries and tools etc.). For me the libraries/binaries required for linking appear to be justified but the rest appear to be installed only for the Installer.
This package addition also ends up installing gamin which provides the gam_server which has bugs in it that lead to > 90% CPU consumption.
I further tried erasing some of the packages to see if anything broke. Till now nothing is broken and the database is running fine. Till now I have removed:
gamin
gamin-python
gnome-mount
gnome-vfs2
libbonoboui
libgnome
libgnomeui
oracle-validated
yum-updatesd
esound
hicolor-icon-theme
GConf2
gnome-keyring
gtk2
libglade2
libgnomecanvas
libnotify
libwnck
notification-daemon
audiofile
cups-libs
gnome-mime-data
cairo
pango
My questions:
• How have you created a production/hardened Linux based Oracle installation?
• Can you share your experiences in hardening Linux for Oracle and deploying the Oracle 10g RDBMS without installing the scores of packages which themselves might compromise the server?
• What exactly is the dependency for the Oracle 10g RDBMS on X11, Gnome, Gamin and graphic libraries such as Cairo and Pango (to name a few)?
• Which Linux system services are really mandatory for Oracle?
• Does a non-default secure installation compromise Oracle support?
The current memory footprint for this setup (without any workload) is (figures in MB):
total used free shared buffers cached
Mem: 1010 458 552 0 19 377
-/+ buffers/cache: 61 949
Swap: 2047 0 2047
…of this 290 MB belongs to Oracle ☺
I will be working with the other route – without using the oracle-validated rpm.
Please let me have your feedback.
BR
Aniruddha

Hi,
I'll paste the rpm -qa of a RHEL5 server I have installed through rpm -ivh (not yum at all)
aspell-0.60.3-7.1
aspell-en-6.0-2.1
aspell-es-0.50-13.2.2
at-3.1.8-82.fc6
atk-1.12.2-1.fc6
audit-libs-1.7.13-2.el5
audit-libs-1.7.13-2.el5
audit-libs-python-1.7.13-2.el5
authconfig-5.3.21-6.el5
avahi-0.6.16-6.el5
avahi-compat-libdns_sd-0.6.16-6.el5
basesystem-8.0-5.1.1
bash-3.2-24.el5
bc-1.06-21
binutils-2.17.50.0.6-12.el5
bitmap-fonts-0.3-5.1.1
bitstream-vera-fonts-1.10-7
bzip2-1.0.3-4.el5_2
bzip2-libs-1.0.3-4.el5_2
cairo-1.2.4-5.el5
checkpolicy-1.33.1-4.el5
chkconfig-1.3.30.1-2
compat-libstdc++-33-3.2.3-61
compat-libstdc++-33-3.2.3-61
coreutils-5.97-23.el5
cpio-2.6-23.el5
cpp-4.1.2-46.el5
cracklib-2.8.9-3.3
cracklib-dicts-2.8.9-3.3
crontabs-1.10-8
cryptsetup-luks-1.0.3-5.el5
cups-1.3.7-11.el5
cups-libs-1.3.7-11.el5
cyrus-sasl-2.1.22-5.el5
cyrus-sasl-lib-2.1.22-5.el5
db4-4.3.29-10.el5
db4-4.3.29-10.el5
dbus-1.1.2-12.el5
dbus-glib-0.73-8.el5
dbus-libs-1.1.2-12.el5
dbus-python-0.70-7.el5
Deployment_Guide-en-US-5.2-11
Deployment_Guide-es-ES-5.2-11
desktop-file-utils-0.10-7
device-mapper-1.02.32-1.el5
device-mapper-1.02.32-1.el5
device-mapper-event-1.02.32-1.el5
device-mapper-multipath-0.4.7-30.el5
diffutils-2.8.1-15.2.3.el5
dmidecode-2.9-1.el5
dmraid-1.0.0.rc13-53.el5
dmraid-events-1.0.0.rc13-53.el5
e2fsprogs-1.39-23.el5
e2fsprogs-devel-1.39-23.el5
e2fsprogs-devel-1.39-23.el5
e2fsprogs-libs-1.39-23.el5
e2fsprogs-libs-1.39-23.el5
ed-0.2-39.el5_2
eject-2.1.5-4.2.el5
elfutils-0.137-3.el5
elfutils-libelf-0.137-3.el5
elfutils-libelf-devel-0.137-3.el5
elfutils-libelf-devel-static-0.137-3.el5
elfutils-libs-0.137-3.el5
ethtool-6-3.el5
expat-1.95.8-8.2.1
file-4.17-15.el5_3.1
filesystem-2.4.0-2
findutils-4.2.27-6.el5
fipscheck-1.2.0-1.el5
fipscheck-lib-1.2.0-1.el5
fontconfig-2.4.1-7.el5
freetype-2.2.1-21.el5_3
freetype-2.2.1-21.el5_3
gawk-3.1.5-14.el5
gcc-4.1.2-46.el5
gcc-c++-4.1.2-46.el5
gdbm-1.8.0-26.2.1
gettext-0.14.6-4.el5
glib2-2.12.3-4.el5_3.1
glib2-2.12.3-4.el5_3.1
glib2-devel-2.12.3-4.el5_3.1
glib2-devel-2.12.3-4.el5_3.1
glibc-2.5-42
glibc-2.5-42
glibc-common-2.5-42
glibc-devel-2.5-42
glibc-devel-2.5-42
glibc-headers-2.5-42
gnutls-1.4.1-3.el5_2.1
grep-2.5.1-55.el5
groff-1.18.1.1-11.1
grub-0.97-13.5
gtk2-2.10.4-20.el5
gzip-1.3.5-10.el5
hal-0.5.8.1-52.el5
hdparm-6.6-2
hesiod-3.1.0-8
hicolor-icon-theme-0.9-2.1
hmaccalc-0.9.6-1.el5
htmlview-4.0.0-2.el5
hwdata-0.213.16-1.el5
info-4.8-14.el5
initscripts-8.45.30-2.el5
iproute-2.6.18-10.el5
iptables-1.3.5-5.3.el5
iptables-ipv6-1.3.5-5.3.el5
iputils-20020927-46.el5
kbd-1.12-21.el5
kernel-2.6.18-164.el5
kernel-headers-2.6.18-164.el5
keyutils-libs-1.2-1.el5
kpartx-0.4.7-30.el5
krb5-libs-1.6.1-36.el5
ksh-20080202-2.el5
kudzu-1.2.57.1.21-1
less-394-6.el5
libacl-2.2.39-3.el5
libaio-0.3.106-3.2
libaio-0.3.106-3.2
libaio-devel-0.3.106-3.2
libattr-2.4.32-1.1
libcap-1.10-26
libdaemon-0.10-5.el5
libdmx-1.0.2-3.1
libdrm-2.0.2-1.1
libgcc-4.1.2-46.el5
libgcc-4.1.2-46.el5
libgcrypt-1.4.4-5.el5
libgomp-4.4.0-6.el5
libgomp-4.4.0-6.el5
libgpg-error-1.4-2
libhugetlbfs-1.3-3.el5
libhugetlbfs-1.3-3.el5
libICE-1.0.1-2.1
libICE-1.0.1-2.1
libjpeg-6b-37
libpng-1.2.10-7.1.el5_3.2
libselinux-1.33.4-5.5.el5
libselinux-1.33.4-5.5.el5
libselinux-python-1.33.4-5.5.el5
libselinux-utils-1.33.4-5.5.el5
libsemanage-1.9.1-4.4.el5
libsepol-1.15.2-2.el5
libsepol-1.15.2-2.el5
libSM-1.0.1-3.1
libSM-1.0.1-3.1
libstdc++-4.1.2-46.el5
libstdc++-4.1.2-46.el5
libstdc++-devel-4.1.2-46.el5
libstdc++-devel-4.1.2-46.el5
libsysfs-2.0.0-6
libtermcap-2.0.8-46.1
libtermcap-2.0.8-46.1
libtiff-3.8.2-7.el5_3.4
libusb-0.1.12-5.1
libuser-0.54.7-2.el5.5
libvolume_id-095-14.21.el5
libvolume_id-095-14.21.el5
libX11-1.0.3-11.el5
libX11-1.0.3-11.el5
libXau-1.0.1-3.1
libXau-1.0.1-3.1
libXau-devel-1.0.1-3.1
libXaw-1.0.2-8.1
libXcursor-1.1.7-1.1
libXdmcp-1.0.1-2.1
libXdmcp-1.0.1-2.1
libXext-1.0.1-2.1
libXext-1.0.1-2.1
libXfixes-4.0.1-2.1
libXft-2.1.10-1.1
libXi-1.0.1-3.1
libXinerama-1.0.1-2.1
libxml2-2.6.26-2.1.2.8
libxml2-python-2.6.26-2.1.2.8
libXmu-1.0.2-5
libXp-1.0.0-8.1.el5
libXp-1.0.0-8.1.el5
libXp-devel-1.0.0-8.1.el5
libXpm-3.5.5-3
libXrandr-1.1.1-3.1
libXrender-0.9.1-3.1
libXt-1.0.2-3.1.fc6
libXt-1.0.2-3.1.fc6
libXtst-1.0.1-3.1
libXtst-1.0.1-3.1
libXv-1.0.1-4.1
libXxf86dga-1.0.1-3.1
libXxf86misc-1.0.1-3.1
libXxf86vm-1.0.1-3.1
lm_sensors-2.10.7-4.el5
logrotate-3.7.4-9
lsscsi-0.17-3.el5
lvm2-2.02.46-8.el5
m4-1.4.5-3.el5.1
mailx-8.1.1-44.2.2
make-3.81-3.el5
MAKEDEV-3.23-1.2
man-1.6d-1.1
man-pages-es-1.28-10.1.1
mcstrans-0.2.11-3.el5
mesa-libGL-6.5.1-7.7.el5
microcode_ctl-1.17-1.48.el5
mingetty-1.07-5.2.2
mkinitrd-5.1.19.6-54
mkinitrd-5.1.19.6-54
mktemp-1.5-23.2.2
module-init-tools-3.3-0.pre3.1.54.el5
nano-1.3.12-1.1
nash-5.1.19.6-54
ncurses-5.5-24.20060715
net-tools-1.60-78.el5
newt-0.52.2-12.el5
nspr-4.7.4-1.el5_3.1
nspr-4.7.4-1.el5_3.1
nss-3.12.3.99.3-1.el5_3.2
nss-3.12.3.99.3-1.el5_3.2
ntp-4.2.2p1-9.el5_3.2
ocfs2-2.6.18-164.el5-1.4.2-1.el5
ocfs2console-1.4.2-1.el5
ocfs2-tools-1.4.2-1.el5
ocfs2-tools-devel-1.4.2-1.el5
openldap-2.3.43-3.el5
openssh-4.3p2-36.el5
openssh-clients-4.3p2-36.el5
openssh-server-4.3p2-36.el5
openssl-0.9.8e-12.el5
oracleasm-2.6.18-164.el5-2.0.5-1.el5
oracleasmlib-2.0.4-1.el5
oracleasm-support-2.1.3-1.el5
pam-0.99.6.2-6.el5
pango-1.14.9-6.el5
paps-0.6.6-18.el5
passwd-0.73-1
patch-2.5.4-29.2.3.el5
pax-3.4-1.2.2
pciutils-2.2.3-7.el5
pcre-6.6-2.el5_1.7
perl-5.8.8-27.el5
pkgconfig-0.21-2.el5
pm-utils-0.99.3-10.el5
policycoreutils-1.33.12-14.6.el5
popt-1.10.2.3-18.el5
prelink-0.4.0-2.el5
procmail-3.22-17.1
procps-3.2.7-11.1.el5
psmisc-22.2-7
pycairo-1.2.0-1.1
pygobject2-2.12.1-5.el5
pygtk2-2.10.1-12.el5
python-2.4.3-27.el5
python-numeric-23.7-2.2.2
readline-5.1-3.el5
readline-5.1-3.el5
redhat-logos-4.9.16-1
redhat-lsb-3.1-12.3.EL
redhat-menus-6.7.8-3.el5
redhat-release-5Server-5.4.0.3
redhat-release-notes-5Server-29
rhpl-0.194.1-1
rootfiles-8.1-1.1.1
rpm-4.4.2.3-18.el5
rpm-libs-4.4.2.3-18.el5
rsh-0.17-38.el5
rsync-2.6.8-3.1
sed-4.1.5-5.fc6
selinux-policy-2.4.6-255.el5
selinux-policy-targeted-2.4.6-255.el5
sendmail-8.13.8-2.el5
setools-3.0-3.el5
setserial-2.17-19.2.2
setup-2.5.58-7.el5
sgpio-1.2.0_10-2.el5
shadow-utils-4.0.17-14.el5
slang-2.0.6-4.el5
smartmontools-5.38-2.el5
sqlite-3.3.6-5
sysfsutils-2.0.0-6
sysklogd-1.4.1-44.el5
sysstat-7.0.2-3.el5
system-config-securitylevel-tui-1.6.29.1-2.1.el5
SysVinit-2.86-15.el5
tar-1.15.1-23.0.1.el5
tcl-8.4.13-4.el5
tcl-8.4.13-4.el5
tcp_wrappers-7.6-40.7.el5
tcp_wrappers-7.6-40.7.el5
telnet-0.17-39.el5
termcap-5.5-1.20060701.1
time-1.7-27.2.2
tmpwatch-2.9.7-1.1.el5.2
tzdata-2009k-1.el5
udev-095-14.21.el5
udftools-1.0.0b3-0.1.el5
unzip-5.52-3.el5
usermode-1.88-3.el5.2
util-linux-2.13-0.52.el5
vim-common-7.0.109-6.el5
vim-minimal-7.0.109-6.el5
vixie-cron-4.1-76.el5
vte-0.14.0-2.el5
which-2.16-7
wireless-tools-28-2.el5
xorg-x11-filesystem-7.1-2.fc6
xorg-x11-utils-7.1-2.fc6
xorg-x11-xauth-1.0.1-2.1
zabbix-agent-1.4.6-1.el5
zip-2.31-2.el5
zlib-1.2.3-3
Hope to help,
Mario Alcaide

Migrate cluster to OES2 Linux and new storage

Hi,
I want to migrate a 4 node OES2/Netware NCS cluster to a 4 node OES2/Linux NCS cluster. The storage also has to migrate from old to new storage. The two storage devices are not connected to each other, so I figured a rolling migration is out of the question. So I will build up the new cluster, migrate all resources with the tools provided by Novell and some manual changes.
The cluster hosts several volumes, DNS, DHCP, GroupWise and ZENworks. I don't see much trouble in the migration of DNS, DHCP and GroupWise, but changing references to all ZEN objects is a tedious job.
To minimise the necessary changes in ZEN objects, login scripts etc, I would like to know if it is possible to rename/renumber the new cluster after everything has been migrated and give it back the old name and ip numbers. If not, what would be the best approach?

I'm not sure how well eDir works in this case. Typically, creating a NEW volume (even with the same name) will not automatically re-link the eDirectory objects.
Example:
You have a ZEN NAL object that deploys a network-based MSI like:
\\server1\vol1\data\something.msi
You now create a new cluster object and a NEW virtual server\volume object. I'm not sure you can create a NEW virtual server object with the same name as the old one (I could be wrong--I've never tried it). I guess it would be possible if it was in a diff. eDir container.
Regardless, even if you CAN create a new \\server1\vol1
It's going to have a different GUID in eDir and the eDir objects that WERE using the "old"
\\server1\vol1
are not going to magically know about the new stuff.
Now, from a CLIENT perspective, the Novell Client (assuming 4.91 SP5 here) would happily map to the "new" one with the same name and not be any wiser.
But the home directory attributes on users, and ZEN objects WILL know the difference and you will have to re-edit them all.
It's possible that SOME ZEN NAL objects will just pass along the stuff to the client, in which case, IF you can keep the UNC path (or mapped drive letter) the same, then you should be good to go. But not all ZEN objects are created equally (ie, your ZFD inventory object, server objects, etc.)
Login scripts can easily be adjusted (just depends upon if you have LOTS of them to do or not as it can be time consuming).

DHCP Server - Different Range for Wired and Wireless Network

We have DHCP setup on Windows Server 2012r2 and the range given to us by the main HQ is 10.65.112.1-10.65.112.254 (there are several exclusions under this range)
Now since the range gets exhausted quickly, they provided another one 10.65.122.1-10.65.122.254.
What our branch would love to do is to dedicate the first range for Wired Computers and the other range for Wireless Devices (Phone,Tablets, Mobiles)
Right now we have 2 different scopes setup in DHCP, the second one is disabled. In our network we have 6 access points and also have a CISCO SG300-52 Managed Switch. It has an inbuilt DHCP Server and also has the function for DHCP Relay. But we are not actually using any of its functionality as of now.
So my question is how to have 2 separate ranges for wired and wireless network. People have mentioned vlans but I have no clue on how to get that done.
Is there a simpler way avoding V-LANS or if not, would love to get step by step procedure on how to go about this. Any help will be much appreciated
Regards,
Sheldon

Hi Sheldon, please read this post
https://supportforums.cisco.com/thread/2270049
You will need some modifications though. Steps 1-6 is very relevant. On step 6, you need to pay particular close attention to the "default router". If the SX300 handles your intervlan routing then the default router needs to be the IP of your VLAN. If you have a different device to handle VLAN routing then the default router needs to be that IP address.
-Tom
Please mark answered for helpful posts
http://blogs.cisco.com/smallbusiness/

ZDM7 on OES2 Linux breaks Apache...

Hi guys,
As part of OWS, I have just installed ZDM7 SP1 onto our OES2 Linux server mainly to provide User/Machine policy managment i.e. Roaming Profiles etc for Windows PC via eDir.
Since doing the install, Apache2 refuses to start. I think it may relate to the fact we are running Apache 2.2....not sure. Anyway, here is the startup errors:
-SNIP-
server:/etc/init.d # apache2ctl start
[Tue Jun 10 19:14:29 2008] [warn] module rewrite_module is already loaded, skipping
[Tue Jun 10 19:14:29 2008] [warn] module rewrite_module is already loaded, skipping
httpd2: Syntax error on line 177 of /etc/apache2/httpd.conf: Syntax error on line 99 of /etc/apache2/default-server.conf: Syntax error on line 2 of /etc/apache2/conf.d/oes_httpd.conf: Syntax error on line 2 of /etc/opt/novell/httpd/conf.d/xsrv.conf: Cannot load /opt/novell/xtier/lib/mod_xsrv.so into server: /opt/novell/xtier/lib/mod_xsrv.so: undefined symbol: ap_run_http_method
server:/etc/init.d #
-SNIP-
Any ideas?
Cheers,
Richard.

Did you attempt to install "Middle-Tier"?
I know that Middle-Tier is not supported on OES2, but I don't know if it
will let you try and install it.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"rsargeant" <[email protected]> wrote in message
news:[email protected]..
>
> Hi guys,
>
> As part of OWS, I have just installed ZDM7 SP1 onto our OES2 Linux
> server mainly to provide User/Machine policy managment i.e. Roaming
> Profiles etc for Windows PC via eDir.
>
> Since doing the install, Apache2 refuses to start. I think it may
> relate to the fact we are running Apache 2.2....not sure. Anyway, here
> is the startup errors:
>
> -SNIP-
>
> server:/etc/init.d # apache2ctl start
> [Tue Jun 10 19:14:29 2008] [warn] module rewrite_module is already
> loaded, skipping
> [Tue Jun 10 19:14:29 2008] [warn] module rewrite_module is already
> loaded, skipping
> httpd2: Syntax error on line 177 of /etc/apache2/httpd.conf: Syntax
> error on line 99 of /etc/apache2/default-server.conf: Syntax error on
> line 2 of /etc/apache2/conf.d/oes_httpd.conf: Syntax error on line 2 of
> /etc/opt/novell/httpd/conf.d/xsrv.conf: Cannot load
> /opt/novell/xtier/lib/mod_xsrv.so into server:
> /opt/novell/xtier/lib/mod_xsrv.so: undefined symbol:
> ap_run_http_method
> server:/etc/init.d #
>
> -SNIP-
>
> Any ideas?
>
> Cheers,
>
> Richard.
>
>
> --
> rsargeant
> ------------------------------------------------------------------------
> rsargeant's Profile: http://forums.novell.com/member.php?userid=1691
> View this thread: http://forums.novell.com/showthread.php?t=332110
>

Best Email Server Linux for PUSH IMAP on BB10

Hi,
I have mdaemon 10 in my company but this version not support PUSH Email for IMAP, I want change this but I want to know which is the best email server (not microsoft) in linux for this?
You can help me? Any can tell me some options?
Best Regards,

I successfuly use vsftpd on a production server (& AL mirror) at ftp.kegep.tuc.gr so I can recommend it. You just need to change the line "disable = yes" to "disable = on" in /etc/xinetd.d/vsftpd and start xinetd. Check also 'man vsftpd.conf' for configuration options.
Proftpd is easier to setup & I was using it on my debian woody server for a long time, but vsftpd is more secure IMHO (proftpd had 2 advisories lately, plus redhat.com & openbsd.org use vsftpd ) & more advanced.
I can send you some conf files if you want, send me your e-mail via pm for that.

How many iPads can you setup on one iTunes account for a school?

How many iPads can you setup on one iTunes account for a school?
What is the best system? We have 30 iPads.

That would be fine.

I didn't setup a two step verification for my apple Id , and then when i login into my account on the browser it prompt to enter my verification code !!! HOW COME

i didn't setup a two step verification for my apple Id , and then when i login into my account on the browser it prompt to enter my verification code !!! HOW COME
please help because all my data are stored in the cloud

- See if it is listed here for downloading. If it is then redownload it..
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- If not there then contact iTunes.
Contact iTunes

Setup problem of Entertainment Center for Windows 7.

There is a problem with Creative's Entertainment Center for Sound Blaster X-Fi. In the download section for my SB X-Fi Platinum card, the Entertainment Center setup file is only available for Windows Vista and not for Windows 7. Even if I choose compatible mode for Windows Vista it won't work because in the installation process you'll get an error message when it's almost about to finish all the time at the same spot. It would be great if someone could correct this now because it has been like this for a long time.
***** Full Size Link: http://imageshack.com/a/img35/6577/lskf.png *****

B? You have Creative Console Launcher, I believe and that is the program you can use to change between audio creation, entertainment and gaming mode. Each mode highlights the card's specialities in that area. You have a vitural multi-track mixer in audio creation mode. You have Dolby and DTS encoder/decoder options in entertainment mode, and you have a generic access to the cards other features in gaming mode.

I setup a new apple ID for my IPAD, but I want to transfer music, pictures form a different apple ID

setup a new apple ID for my IPAD, but I want to transfer music, pictures form a different apple ID

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs > http://support.apple.com/kb/HE37

I setup a separate itunes account for my iphone. I put my ipod music onto it. The music will not sync to my iphone. It tells that all info will be lost if I do it. HELP! The music is showing in the library.

I setup a separate itunes account for my iphone. I put my ipod music onto it. The music will not sync to my iphone. It tells that all info will be lost if I do it. HELP! The music is showing in the library.

you can connect the iPhone to your mac and import those iPhone photos and videos to iPhoto assuming you have iPhoto. You can create a folder and export all those photos to the Finder. Keep safe somewhere. Also keep the iPhoto library for safe keeping. When you restore your iPhone you can sync all those photos back to the iPhone. so you will lose nothing. Just remember when you export from iPhoto select jpeg for photos and original for videos taken with the iPhone.

How to Install Oracle 11g on Linux for Power?

I've installed RedHat Enterprise Linux 5.4 on IBM PowerPC server.
Now I want to install Oracle 11g on it. But there are no Oracle 11g downloads for Linux for Power.
Is there any workaround so Oracle 11g can be installed on Linux on Power?

Hi,
I think you can forget it. Oracle 10g R2 was the last version supported on Linux PowerPC.
Cheers,
David
OCP 9i
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

How to setup the 'Client Licensing Mode' for Windows server?

Hello,
We will install the SBO server:
OS: Windows Server 2003 Standard Edition
SBO Clients: 150
How should we setup the 'Client Licesing Mode' for the windows server?
If we select the mode "Per server,Number of concurrent connections", how to set the connection number?
Thanks in advance.
Don

Hi..
you can set License to Particular user using License under Administration and Client will automatically fetch License using License Manager on License Server
Regards,
Bhavank

What should I do to setup a new MacBook pro for first time when moving from a PC?

What should I do to setup a new MacBook pro for first time when moving from a PC?

you have to use the migration assistant if you want your files transfered from your pc to mac this link will be helpful
http://support.apple.com/kb/HT4796

Setup DHCP on OES2 Linux for Avaya 5610 phones

Similar Messages

Maybe you are looking for