Setup PeopleTools 8.53 Database Issue (Linux Version)
Folk,
Hello. I am installing PeopleTools 8.53 Internet Architecture. Database Server is Oracle Dabase 11gR1. OS is Oracle Linux 5.
I have installed JDK7, WebLogic 10.3.6, Tuxedo 11gR1 and PeopleTools 8.53 successfully. But when set up PeopleTools8.53 Database in the way as below,
I get an error message and cannot proceed.
[user@localhost PT8.53]$ pwd
/opt/PT8.53
[user@localhost PT8.53]$ ls
AppBatchDBORA dict psconfig.sh setup
AppBatchDBWebExe etc PSEMAgent sqr
appserv fonts PSEMViewer src
bin jre readme.txt toolsadmin.sh
cblbin jre1.7.0 scripts utility
ccr log sdk web
class PeopleTools_InstallLog.log SecurityAddIns
data peopletools.properties secvault
[user@localhost PT8.53]$ ./psconfig.sh
[user@localhost PT8.53]$ cd setup
[user@localhost setup]$ ls
ccr pscbl.mak PsTestFramework
Client pscbl_mf.mak pstuxftp.txt
dashboard PsCIA psvccrt
dbcodes.pt psdb.sh ptib.jar
dotnetredist psdmtx.cfg readonly.txt
endorsed psmkreadonly.sh searchCobolPgms.ps
NOTESDB psmkwritable.sh soap
nVisionDrill PsMpCrystalInstall unicode.cfg
OpenXmlSDK PsMpDbInstall unpack_jre.sh
parmfile PsMpPIAInstall UPGCOMPVIEWER
peopletools_ab_reg.cfx PsMpWebAppDeployInstall WebCenter
pkgs PSODBC writable.txt
PsCA psrun.mak
[user@localhost setup]$ cd PsMpDbInstall
[user@localhost PsMpDbInstall]$ ls
InstData setup.bat setup.sh
[user@localhost PsMpDbInstall]$ ./setup.sh
Setting temporary directory /tmp/IA.6736
Executing setup.linux LAX_VM /opt/PT8.53/jre/bin/java -DCOMP_NAME=localhost.localdomain -DPS_UMASK=0002
Preparing to install...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
===============================================================================
Peoplesoft Database Configuration (created with InstallAnywhere)
Preparing CONSOLE Mode Installation...
===============================================================================
Welcome
Welcome to the PeopleSoft Database Configuration Wizard 8.53
This Wizard will assist you in configuring and loading a PeopleSoft database.
PRESS <ENTER> TO CONTINUE:
===============================================================================
Error
You must run psconfig.sh (. ./psconfig.sh) under your PS_HOME directory before
starting the Database Configuration Wizard.
PRESS <ENTER> TO ACCEPT THE FOLLOWING (OK):
[user@localhost PsMpDbInstall]$
As you see the above, I have run ./psconfig.sh in the directory /opt/PT8.53 and then run ./setup.sh in the directory /opt/PT8.53/setup/PsMpDbInstall.
but get the error message:
"You must run psconfig.sh (. ./psconfig.sh) under your PS_HOME directory before starting the Database Configuration Wizard."
I have run the 2 commands ./psconfig.sh and ./setup.sh in root but get the same error message.
My question is: Does PeopleTools8.53 Linux Version have a problem ? How to solve the issue ?
Thanks.
Folks,
Hello. Thanks a lot for replying.
. ./psconfig.sh has gone through. Now, I get new issues as below:
[root@localhost PsMpDbInstall]# pwd
/opt/PT8.53/setup/PsMpDbInstall
[root@localhost PsMpDbInstall]# ./setup.sh
Setting temporary directory /tmp/IA.30567
Executing setup.linux LAX_VM /opt/PT8.53/jre/bin/java -DCOMP_NAME=localhost.localdomain -DPS_UMASK=0022
Preparing to install...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
===============================================================================
Peoplesoft Database Configuration (created with InstallAnywhere)
Preparing CONSOLE Mode Installation...
===============================================================================
Welcome
Welcome to the PeopleSoft Database Configuration Wizard 8.53
This Wizard will assist you in configuring and loading a PeopleSoft database.
PRESS <ENTER> TO CONTINUE:
===============================================================================
Please enter an installation location or press <ENTER> to accept the default
(DEFAULT: /opt/PT8.53):
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Note: If you have installed PeopleSoft Applications outside PeopleTools PS_HOME
then choose the PeopleSoft Applications home PS_APP_HOME, else leave the
default PS_HOME.
Choose the directory where you previously installed PeopleSoft Applications,
commonly known as PS_APP_HOME. or press <ENTER> to accept the default
(DEFAULT: /opt/PT8.53):
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
For a database platform of 'Oracle', are you installing a:
1- Non-Unicode Database
->2- Unicode Database
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
Oracle - UNICODE
===============================================================================
Select Character Set:
->1- AL32UTF8
2- UTF8
To select an item enter its number, or 0 when you are finished [0] : 0
Database Create Type:
->1- PeopleTools System
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Select PeopleSoft Application:
->1- PeopleTools System Database - US English
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Specify the directory path for 'sqlplus' [/products/oracle/9.2.0/bin]: /home/user/OracleDB_Home/bin
Specify the location for ORACLE_HOME [/products/oracle/9.2.0]: /home/user/OracleDB_Home/bin
Location of modified scripts: /opt/PT8.53/modifiedscripts
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Do you want to create a new SID or use existing one?
->1- Create new SID
2- Use existing SID
To select an item enter its number, or 0 when you are finished [0] : 2
Do you want to create a new SID or use existing one?
1- Create new SID
->2- Use existing SID
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Oracle SID [PTSYS]: DB1
DatabaseName [PTSYS]: PT853
Mount Point 1( for SYSTEM and REDO LOGS file in createdb.sql, ex: NT 'C' ,
UNIX 'u01') [c]: u01
Mount Point 2 ( for PSTEMP and PSDEFAULT file in utlspace.sql, ex: NT 'C' ,
UNIX 'u01') [c]: u01
Mount Point 3 ( for all files in xxddl.sql, ex: NT 'C' , UNIX 'u01') [c]: u01
Enable AutoExtend for Peoplesoft Tablespaces?
->1- Yes
2- No
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Peoplesoft owner ID (ex: 'SYSADM') [SYSADM]: SYSADM
Peoplesoft owner password (ex: 'SYSADM') []:
Peoplesoft owner password Re-type []:
Peoplesoft connect ID [people]: people
Peoplesoft connect password []:
Peoplesoft connect password Re-type []:
Peoplesoft default tablespace (ex: 'PSDEFAULT') [PSDEFAULT]: PSDEFAULT
Location of init.ora file complete path
[/home/user/OracleDB_Home/bin/dbs/initDB1.ora]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 2
===============================================================================
Oracle SID [DB1]:
DatabaseName [PT853]:
Mount Point 1( for SYSTEM and REDO LOGS file in createdb.sql, ex: NT 'C' ,
UNIX 'u01') [u01]:
Mount Point 2 ( for PSTEMP and PSDEFAULT file in utlspace.sql, ex: NT 'C' ,
UNIX 'u01') [u01]:
Mount Point 3 ( for all files in xxddl.sql, ex: NT 'C' , UNIX 'u01') [u01]
Enable AutoExtend for Peoplesoft Tablespaces?
->1- Yes
2- No
To select an item enter its number, or 0 when you are finished [0] :
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] :
===============================================================================
Please enter the Appserver User and Password for your database.
Appserver User []: tlisten
Password []:
Re-type Password []:
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Please enter the Webserver User and Password for your database.
Webserver User : PTWEBSERVER
Password []:
Re-type Password []:
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Choose whether to enable or disable all other user profiles in your database.
->1- Disable
2- Enable
To select an item enter its number, or 0 when you are finished [0] : 2
Choose whether to enable or disable all other user profiles in your database.
1- Disable
->2- Enable
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Choose whether to set the password same as the OPRID (user) or a different
password (a global password, same for all OPRIDs).
->1- Set the password same as OPRID
2- I would like to set a different password
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Select Base Lanaguage
->1- ENG - US English
To select an item enter its number, or 0 when you are finished [0] : 1
Select Base Lanaguage
->1- ENG - US English
To select an item enter its number, or 0 when you are finished [0] : 0
Press 1 for Next, 2 for Previous, 3 to Cancel or 5 to Redisplay [1] : 1
===============================================================================
Pre-Installation Summary
Please Review the Following Before Continuing:
Product Name:
Peoplesoft Database Configuration
Install Folder:
/opt/PT8.53
Apps Install Home:
/opt/PT8.53
Database Platform:
Oracle - Unicode
Oracle SID:
DB1
Application:
PeopleTools System Database - US English
Database Name:
PT853
Please type 'back' to go to previous panels
PRESS <ENTER> TO CONTINUE:
===============================================================================
Installing...
[==================|==================|==================|==================]
[------------------|------------------|------------------|------------------]
===============================================================================
Please Wait...
Executing.. /opt/PT8.53/modifiedscripts/psadmin.sql.
===============================================================================
Please Wait...
Executing.. /opt/PT8.53/modifiedscripts/connect.sql.
===============================================================================
Executing DM: -CT ORACLE -CS localhost.localdomain -CD PT853 -CO SYSADM -CP
SYSADM -CI people -CW people -FP /opt/PT8.53/modifiedscripts/dbsetup.dms
Console Mode: true
Initializing Data Mover ... please wait
Console DM Mode: /opt/PT8.53/bin/psdmtx /opt/PT8.53/setup/parm1
Error: unable to terminate process
ExitCode: 127
Error: true
===============================================================================
Error
The following error occurred while running data mover .
Error: File not found: /opt/PT8.53/scripts/pt853ora.dms
Please select OK to exit installer.
PRESS <ENTER> TO ACCEPT THE FOLLOWING (OK):
===============================================================================
Install Complete
The installation of Peoplesoft Database Configuration is complete, but some
errors occurred during the install.
Please see the installation log for details. Press "Done" to quit the
installer.
PRESS <ENTER> TO EXIT THE INSTALLER:
[root@localhost PsMpDbInstall]#
As you see the entire installation process above, the Installer cannot initialize Data Mover. I have run dbsetup.dms seperately, it cannot run. The 2 files psdmtx and parm1 cannot run.
My questions are:
First, how to get to Data Mover Bootstrap mode at this point of the installation so that import data into Database Instance ?
Second, how to view Oracle database instances in Oracle Database Server so that make sure Database instance PT853 is created ?
Thanks.
Similar Messages
-
PeopleTools 8.53 Linux Version PIA: JDK 7 Issues
Folks,
Hello. I am installing PeopleTools 8.53 (Linux Version) with WebLogic11gR1 Generic and Coherence (file name V29856-01) that requires JDK 7 Linux x86-64 (file name V35017-01). All files are downloaded from http://www.edelivery.oracle.com.
Before install WebLogic 11gR1, we need to install JDK 7. After extract v35017-01.zip in Linux, it turns into the file jdk-7u9-linux-x64.rpm.
When install the file, I get the message as below:
[root@localhost Java7_JDK_Linux_64bit]# rpm -ivh jdk-7u9-linux-x64.rpm
Preparing... ########################################### [100%]
1:jdk ########################################### [100%]
Unpacking JAR files...
rt.jar...
Error: Could not open input file: /usr/java/jdk1.7.0_09/jre/lib/rt.pack
jsse.jar...
Error: Could not open input file: /usr/java/jdk1.7.0_09/jre/lib/jsse.pack
charsets.jar...
Error: Could not open input file: /usr/java/jdk1.7.0_09/jre/lib/charsets.pack
tools.jar...
Error: Could not open input file: /usr/java/jdk1.7.0_09/lib/tools.pack
localedata.jar...
Error: Could not open input file: /usr/java/jdk1.7.0_09/jre/lib/ext/localedata.pack
[root@localhost Java7_JDK_Linux_64bit]#
Some folks told me the above message is a warning and can be ignored. However, I have deleted the default installation directory /usr/java and install it again and get the message below:
[root@localhost Java7_JDK_Linux_64bit]# ls
jdk-7u9-linux-x64.rpm V35017-01.zip
[root@localhost Java7_JDK_Linux_64bit]# rpm -ivh jdk-7u9-linux-x64.rpm
Preparing... ########################################### [100%]
package jdk-1.7.0_09-fcs is already installed
[root@localhost Java7_JDK_Linux_64bit]#
[root@localhost Java7_JDK_Linux_64bit]# rpm -ivh --prefix=/JDK7 jdk-7u9-linux-x64.rpm
Preparing... ########################################### [100%]
package jdk-1.7.0_09-fcs is already installed
[root@localhost Java7_JDK_Linux_64bit]#
The default installation directory is /usr/java, but the package jdk-1.7.0_09-fcs is not in /usr/java. I search the entire file system, but the packagejdk-1.7.0_09-fcs is not in any other directories.
My questions are:
First, the package jdk-1.7.0_09-fcs is not in any directory. Why the message says "package jdk-1.7.0_09-fcs is already installed" ?
Second, I try to install it into another location /JDK7 and get the same message as above. What's wrong ?
Third, do I need to remove entire directory /usr and then reinstall it ?
Thanks.
code formatting Message was edited by: NicolasGasparottoDon't delete /usr or you'll be reinstalling your OS.
since you installed with rpm, you should have removed with rpm. deleting the files installed by rpm does not remove the package from the rpm database.
try doing
rpm -Uvh --force jdk-7u9-linux-x64.rpmto reinstall over top the existing package
man rpmgives you all the documentation and there is countless pieces of information available online. It sounds like you should read up on Linux Administration basics. Administering/Installing PeopleSoft requires some skill in operating systems, without them you will run into potential problems all over the place. -
Installation error message for Oracle Database software for version 10g
Would someone be able to advise why I keep getting the following error message whilst installing Oracle trial Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition? Link listed below : -
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Error message "Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp"
Below is the 12 steps that I go through, please advise what I'm doing wrong : -
1. (Operations) default is Create a database
2. (Database templetes) default is general purpose
3. (Database Identification) projemp.local for Global database name & projemp for SID
4. (Management options) default is "Configure the database with Enterprise manager, also the options button has been clicked for "Use database control for database management"
5. (Database Credentials) the options button has been clicked for "Use the same password for all accounts" so I've set up a new password, was that correct?
6. (Storage options) the options button is clicked for "File System - use the file system for database storage.
7. (Database file locations) the options button is clicked for "Use database file locations for template" Is this option correct? Other options are Use common location for all database files or use Oracle-managed files?
8. (Recovery configuration) the options button is clicked for "Specify flash recovery area
9. (Database content) nothing has been selected, the only option is "Sample schemas" should that be clicked?
10. (Initialization parameters) the options button is clicked for "Typical- allocate memory as a % of the total physical memory
11. (Database storage) no options available
12. (Creation options) the options button has been selected for "Create Database"
Click finish
I then get a screen stating General purpose, click OK then I get the following error message as stated at the start of this e-mail ""Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".
Regards
Phil855880 wrote:
I have been trying to install the "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition" about six times with no success.Do you realize you just mentioned 3 different and distinct products? So which one are you installing?
>
I've gone through my courses instructions as listed above (1-12) and end up with the following error message"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".What course?
>
I've removed the software from my computer using control panel, programs & features then uninstall once but the other five times the software hasn't been listed. Whilst the Oracle was on my task bar I was able to install using Start > Programs > Oracle - HOME-NAME > Database Administration > Database Configuration Assistant.No you didn't. Database Configuration Assistant does not remove software. It can remove a database. As I mentioned before, there is a difference between the software and the objects that software manages. Deleting an Excel spreadsheet is not the same as deleting Microsoft Office. Deleting an Oracle database with Database configuration assistant is not the same as removing the Oracle software.
>
Now that oracle is not on my task bar I've unzipped the link below, clicked on db, Disk1, setup, changed the Database password (is that correct?) install and I get the following error message "Check complete. The overall result of this check is: Failed<<<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses;
However, before you can do this, you must configure the Microsoft LoopBack Adaptor to be the primary network adapter on the system. See the installation Guide for more details on installing the software on systems configured with DHCP."
So what did you do with the above error message? Did you follow up on what it said? Did you read the very fine Installation Guide that comes with the software? Did you read the section on networking considerations where it discussed DHCP assigned addresses and installing the loopback adapter?
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Ok, that link takes us to the download page, which does not shed any light at all on your problems
I'm using Windows Vista Home Premium, 32 bit operating system, and my computer is saying I have 142 GB free space.
If you read the installation manual that came with the downloaded software, you'd have seen in the prerequisites that Home editions of Windows are NOT listed as supported platforms, whereas Business, Enterprise, and Ultimate editions specifically ARE listed as supportd.
Hope this is some help.And
I'm not to clever on computers so would you be able to advise how I get to the command window to issue the SET command please?
Also I've no idea what OS user I am, I'm taking an on-line Oracle course and been advised to install "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition"
How do I find out if I'm part of an Administrator, ORA_DBA group ?
Can you walk me through how to create the directory from command line please?Ok, given the above statements from you, I'm not even sure where to begin. I don't want to be cruel, but this self-admitted lack of even the most rudimentary knowledge by someone attempting to learn about Oracle is truly astounding. What course are you taking? Why are you taking this course? -
HI
i am getting the issue of addbctl.sh exiting with status 9 when i am trying to start the database
what could be the reason
hoping ur reply
TIA
NikkiHi bheetal
LSNRCTL for Linux: Version 9.2.0.5.0 - Production on 01-FEB-2008 10:46:25
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=( lsnrctl status PROD1
PROTOCOL=IPC)(KEY=EXTPROCPROD1))
STATUS of the LISTENER
Alias PROD1
Version TNSLSNR for Linux: Version 9.2.0.5.0 - Production
Start Date 01-FEB-2008 10:44:07
Uptime 0 days 0 hr. 2 min. 18 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File /apps/sam/prod1db/9.2.0/network/admin/PROD1_apps/listener.ora
Listener Log File /apps/sam/prod1db/9.2.0/network/admin/prod1.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROCPROD1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=apps.ces.com)(PORT=1522)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PROD1" has 1 instance(s).
Instance "PROD1", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
id
uid=501(oraprod) gid=501(dba) groups=501(dba) context=user_u:system_r:unconfined _t
please idea for this solution.
bye
Nikki -
Having trouble connecting SQL Developer to database on LINUX machine
Having trouble connecting SQL Developer to database on LINUX machine
Hello,
I am trying to connect my windows 7 home premium machine to an oracle database 11g on a RedHat 5 machine using SQL Developer. i got this error message on SQL Developer
Status : Failure - Test failed :The Network Adapter could not establish the connection
on Linux
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 03-APR-2013 16:13:13
Uptime 7 days 22 hr. 16 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/11.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.X.X.X)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orc11g" has 1 instance(s).
Instance "orc11g", status READY, has 1 handler(s) for this service...
Service "orc11gXDB" has 1 instance(s).
Instance "orc11g", status READY, has 1 handler(s) for this service...
Service "orc11g_XPT" has 1 instance(s).
Instance "orc11g", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL> and TNSPING
tnsping 172.x.x.x
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 11-APR-2013 14:32:17
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
Used EZCONNECT adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=172.x.x.x))(ADDRESS=(PROTOCOL=TCP)(HOST=172.x.x.x)(PORT=1521)))
OK (0 msec)
[oracle@ltebilling ~]$Tnsnames.ora On Linux ,
ORC11G =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orc11g)
)Listner on Linux ,
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
)/ect/hosts Linux ,
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
172.x.x.x LTEBillingand there is no problem of ping linux from windows
Edited by: user11309581 on Apr 11, 2013 3:16 PMyes really i'm already enaple the port 1521 and SELINUX=disabled
[root@ltebilling ~]# /etc/init.d/iptables status
Table: filter
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
Chain RH-Firewall-1-INPUT (2 references)
num target prot opt source destination
1 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
2 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 255
3 ACCEPT esp -- 0.0.0.0/0 0.0.0.0/0
4 ACCEPT ah -- 0.0.0.0/0 0.0.0.0/0
5 ACCEPT udp -- 0.0.0.0/0 224.0.0.251 udp dpt:5353
6 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:631
7 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:631
8 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
9 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:1521
10 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
11 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibitedbut from windows system when i'm try tnsping i got this error
C:\Windows\system32>tnsping orc11g
TNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 11-APR-2
013 14:44:09
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
D:\app\ubai\product\11.2.0\dbhome_2\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x
.x)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orc11g))
TNS-12535: TNS:operation timed out
C:\Windows\system32> -
Copy database from linux to windows error
Hi,
I have my database on linux 4 as oracle 10g i want to copy it on windows xp oracle 10g. One option is to migrate using rman but both of them have same
format by
select * from V$DB_TRANSPORTABLE_PLATFORM
Microsoft Windows IA (32-bit) Little
Linux IA (32-bit) Littlei take cold backup of my database on linux and copy it to windows then edit pfile and mount the database now the issue to change the path of datafiles and log files
i am using
SQL> select * from v$logfile;
GROUP# STATUS TYPE
MEMBER
IS_
3 ONLINE
/home/oracle/oracle/product/10.2.0/oradata/orcl/redo03.log
NO
2 ONLINE
/home/oracle/oracle/product/10.2.0/oradata/orcl/redo02.log
NO
GROUP# STATUS TYPE
MEMBER
IS_
1 ONLINE
/home/oracle/oracle/product/10.2.0/oradata/orcl/redo01.log
NO
SQL> alter database rename file '/home/oracle/oracle/product/10.2.0/oradata/orcl/redo01.log' to 'D:\oracle\product\10.2.0\oradata\orcl\redo1.log';
alter database rename file '/home/oracle/oracle/product/10.2.0/oradata/orcl/redo01.log' to 'D:\oracle\product\10.2.0\oradata\orcl\redo1.log'
ERROR at line 1:
ORA-01511: error in renaming log/data files
ORA-01516: nonexistent log file, datafile, or tempfile
"/home/oracle/oracle/product/10.2.0/oradata/orcl/redo01.log"i know the original location '/home/oracle/oracle/product/10.2.0/oradata/orcl/redo01.log' doesn't exists but is there any way to solve it.
Thanks
umeshThanks for your help
SQL> ed
Wrote file afiedt.buf
1 CREATE CONTROLFILE REUSE DATABASE "ORCL" RESETLOGS ARCHIVELOG
2 MAXLOGFILES 16
3 MAXLOGMEMBERS 3
4 MAXDATAFILES 100
5 MAXINSTANCES 8
6 MAXLOGHISTORY 292
7 LOGFILE
8 GROUP 1 'D:\oracle\product\10.2.0\oradata\orcl\redo1.log' SIZE 50M,
9 GROUP 2 'D:\oracle\product\10.2.0\oradata\orcl\redo2.log' SIZE 50M,
10 GROUP 3 'D:\oracle\product\10.2.0\oradata\orcl\redo3.log' SIZE 50M
11 -- STANDBY LOGFILE
12 DATAFILE
13 'D:\oracle\product\10.2.0\oradata\orcl\system01.dbf',
14 'D:\oracle\product\10.2.0\oradata\orcl\undotbs01.dbf',
15 'D:\oracle\product\10.2.0\oradata\orcl\sysaux01.dbf',
16 'D:\oracle\product\10.2.0\oradata\orcl\users01.dbf',
17 'D:\oracle\product\10.2.0\oradata\orcl\example01.dbf'
18* CHARACTER SET WE8ISO8859P1
19 /
Control file created.
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-01589: must use RESETLOGS or NORESETLOGS option for database openThis is error in log file
Errors in file d:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_3836.trc:
ORA-30012: undo tablespace 'UNDOTBS' does not exist or of wrong type
Thu Nov 05 13:35:09 2009
Error 30012 happened during db open, shutting down database
USER: terminating instance due to error 30012
ARC1 started with pid=18, OS id=3680
Thu Nov 05 13:35:10 2009
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_pmon_2316.trc:
ORA-30012: undo tablespace '' does not exist or of wrong type
Thu Nov 05 13:35:10 2009
ARC0: STARTING ARCH PROCESSES COMPLETE
Thu Nov 05 13:35:10 2009
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Thu Nov 05 13:35:11 2009
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_reco_2544.trc:
ORA-30012: undo tablespace '' does not exist or of wrong type
Thu Nov 05 13:35:11 2009
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_smon_756.trc:
ORA-30012: undo tablespace '' does not exist or of wrong type
Thu Nov 05 13:35:11 2009
ARCH: Detected ARCH process failure
ARCH: Detected ARCH process failure
ARCH: Detected ARCH process failure
ARCH: STARTING ARCH PROCESSES
Thu Nov 05 13:35:11 2009
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_psp0_2888.trc:
ORA-30012: undo tablespace '' does not exist or of wrong type
Thu Nov 05 13:35:11 2009
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_lgwr_1320.trc:
ORA-30012: undo tablespace '' does not exist or of wrong type
Thu Nov 05 13:35:11 2009
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_dbw0_4012.trc:
ORA-30012: undo tablespace '' does not exist or of wrong type
Thu Nov 05 13:35:11 2009
Errors in file d:\oracle\product\10.2.0\admin\orcl\bdump\orcl_mman_3728.trc:
ORA-30012: undo tablespace '' does not exist or of wrong typethanks -
Strange problem with automattic start database on linux
HI,
We have Redhat Version 4.(update )
or
Oracle Version 10.1.0.2.0
we followed instruction mention in documentation. ( 10gr2) for automatic startup database when linux system reboot.
after create above script and followed all mention point when we reboot our linux machine it is hang.
Problem>>>
when we reboot our linux system. it HANG !!!! nothing happen..
On enabling swap space [ok]
| cursor blinksir please tell me How can open my linux machine... please anybody give me any type of advice..
thank you very much.
nomini.Hi,
thank your for your help and reply
but i am not able to open my linux machine so how can i update my oracle startup script.
it is hang during booting time ( linux server)
actually what happen.
i made script and just for test i reboot my linux machine.
every thing goes fine but "oracle startup script" run it will hang !!!
i know it is something wrong with my oracle startup script.
but without open my linux box i cann't do anything.
so
i have to first FIX linux problem
then i FIX my oracle script problem
hope you reply and understand my problem
thank you very much
nomini -
Dear all
I got a Oracle 8i EE license and was installed at a Sun system. However, I want to migrate such Oracle to Linux environment (The Oracle maintenance was expired). So, anyone has the Oracle 8i EE Linux version which can be downloaded for my new installation.
Thanks
Kwan
22 Sept 2006You still should contact your Oracle sales representative.
Oracle no longer officially provides copies of obsolete versions of software, such as database versions 8.1.x or 9.0.x ... the only way to get such copies is by the kindness of strangers who might have such copies. Those strangers include your sales rep. -
How to create a database on linux
Good day friends Oracle forum, I started with Linux and have installed on a linux server with the Oracle 10g installation wizard, now my question is how I believe the database in windows did so through the wizard and configure all linux data but do not know how Algueña can help me with this step.
Very gratefulHi,
Have you able to run DBCA successfully?
If not kindly post the LINUX version in which your have installed oracle and also confirm that you did not got any error during your installation. It seems that you have missing prerequisite rpm.
Thanks,
Karthik -
I install at the new update cc2014 but for some reason in my computer appear double app the old one and the new but the new dose not gave the setup that I have in my old version! What happen ?
Seriously, I doubt that your answer helped Erik. He has two issues.
He installed the new program and has a double icon folders with software. One for the new & one for the old. (I have this same problem.)
He must have attempted to open one of the products and no longer see his personal settings transferred over. (The install will ask to have those settings migrating, but you have to accept it. eh, I could be wrong; but, that what i remembered doing.
I concur with his first.
However, i can not get any of my products to work. Ie. have to constantly click on icon to open; once open i get a unexpected error and have to close. I'm on a mac pro w/ latest os system.
In addition, I have tried to uninstall the older by clicking on the application's manager icon.; Unfortunately, it shuts down at each attempt. Therefore, I am unable to un-install the old product or the new.
Possibly, we were hoping that the new product would be simply updated if an old recent was already installed.
Instead, the installation simply created a new icon and the new folder with product. -
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
An Small step by step how to install this app. I this first example it was installed on Red Hat 6 Linux
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439.
1 - Download it from https://lenovo-na-en.custhelp.com/app/cust_alp/p/1031,1150
2 - Change File permissions ( chmod +x setup-1.4.4.14439.bin)
3 - Now you can install so execute this sintaxis : ./setup-1.4.4.14439.bin
4 - When app installation finishes, you must do it with this file into folder installation (chmod +x LenovoEMCStorageManager)
5 - Then to open the app execute it: ./LenovoEMCStorageManager
Video Tutorial
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
In This second example I installed same version on Ubuntu 13.10. Look at the end of messages of thread and you will see this steps
Install Storage Manager setup-1.4.4.14439.bin in ubuntu.
Attachments:
lenovoemcstoragemanager.jpg 27 KBHello everyone ,
I have a lenovo px4-300d, I'm on Ubuntu 13.10 64bits with Gnome 3 as GUI and I'm trying to install the LenovoEMC storage Manager but it failed :
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
1- Deutsch
->2- English
3- Español
4- Français
5- Italiano
6- Nederlands
7- Português (Brasil)
8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Is it still aproblem with the 64 bits architecture ?
Have you find any solutions ? Thank you very much -
How to install ECC IDES in RED HAT linux version 5
Hai..
I would like to install ECC IDES in linux OS. I dont know Linux. So it is difficult for me to install.
I am having 500 gb HD.and in that 30 GB allocated as NTFS for WinXP.
Left space(470 GB Free) for linux and ECC IDES.
I want to know - how to partition this 470 GB in linux. I dont know which file system should be allocated and how it should be partitioned. I am using RED HAT LINUX Version 5.
i need a step by step process to install red hat linux with proper(file system) partition and
I need a step by step process to install IDES with Linux commands.
Thank You
Regards
R.Thillai Govindarajan> i need a step by step process to install red hat linux with proper(file system) partition and
> I need a step by step process to install IDES with Linux commands.
Get the official installation guides at
http://service.sap.com/instguides
However, they won't contain "now enter command X and now enter command Y". You will need to have a basic understanding what you are doing before you can install a SAP system (and the database).
Markus -
There are several sites that offer Firefox downloads.
I don't trust any of them except mozilla.org
But I can't find a download button on mozilla.
I'm using Linux because my firefox on Windows 7 stopped working and the default download seems to be for a Linux version of firefox.
How can I download a windows version?
Why did Firefox stop working. I was downloading a program -- Tunein Radio - and it looked as if it was installing junkware.
I stopped the download but it seems to have already installed something called file opener. I uninstalled fire opener.
That may have caused the problemhello, you'll find download links for all supported systems & languages at https://www.mozilla.org/firefox/all/
if you suspect that the problem on your system is caused by malware it is probably advisable to run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner], which are specialised in adware and browser hijackers.
[[Troubleshoot Firefox issues caused by malware]] -
CRYSTAL REPORT SERVER 2008 LINUX VERSION INSTALATION PROBLEM
GOOD AFTERNOON TO ALL ,
I am trying to install crystal reports server 2008 on RHEL4 .. after entering the product key...
it is trying to connect to existing database with follwing detalis given by me
..TNS NAME
userid and passwd or oracle user
error :
"failure to validate the database credential has a potentilal to crash the database at a later stage .enter correct information"
i set the all env for oracle oracle_home ,oracle SID ,LD path library..
i grant the source to oracle user also...
after that i tried same CRYSTAL REPORTS SERVER 2008 LINUX VERSION TRY TO INSTALL IN OTHER RHEL machine .it is not at all accepting the product key it self..
pls reply ..
Rehards
MAHENDRAPost to the [Business Objects Enterprise Administration|BI Platform;
forum. This forum is for CR in .NET. (see the heading at the top of this forum).
Marking as assumed answered.
Ludek -
Crystal reports server 2008 linux version instalation problem
GOOD AFTERNOON TO ALL ,
I am trying to install crystal reports server 2008 on RHEL4 .. after entering the product key...
it is trying to connect to existing database with follwing detalis given by me
..TNS NAME
userid and passwd or oracle user
error :
"failure to validate the database credential has a potentilal to crash the database at a later stage .enter correct information"
i set the all env for oracle oracle_home ,oracle SID ,LD path library..
i grant the source to oracle user also...
after that i tried same CRYSTAL REPORTS SERVER 2008 LINUX VERSION TRY TO INSTALL IN OTHER RHEL machine .it is not at all accepting the product key it self..
pls reply ..
Rehards
MAHENDRAPost to the [Business Objects Enterprise Administration|BI Platform;
forum. This forum is for CR in .NET. (see the heading at the top of this forum).
Marking as assumed answered.
Ludek
Maybe you are looking for
-
Problem when I try to download the IOS4 for my iPod Touch 2G
Hello guys! I am from Bella Vista, Buenos Aires, Argentina and I have the following problem: I have an iPod Touch 2G, I installed the lastestversion of iTunes and every time i connect my device to my pc via usb, iTunes opens and a window apears telli
-
Document Split for Manually Cleared Items
Hi SDN, Is there a way to inherit the document splitting characteristics for manually cleared items? To give you an example, please see below scenario in General Ledger View Invoice Dr Expense Cost ctr 10001 Cr Trade Creditors Co
-
ODI-1217 session fails with return code 904
Hi all, I am anil, I new to ODI, can any one help me in it. I have just created a one on one mapping, and then executed it, and I am getting "ODI-1217 session fails with return code 904" this error, what to do, why it happens, can any have any idea.
-
Can't open PDFs, Initially received runtime error,updated Reader - new error Adobe Reader has stopped working, uninstalled re-installed same error message Adobe Reader has stopped working
-
Custom FPM application: why is not visible when creating iview?
hi, I am trying to modify an exiting mss application which is a fpm application. i use the self service admin tool to copy the standard fpm application to a deltalink, and ,according to the documentation , next step should be creating an iview (webdy