SetValueAt won't execute

Hi there,
I have a custom TableModel with my own setValueAt method. Everything works fine, the setValueAt runs whenever I enter a value in a table cell and leave it by clicking in another cell. But when I, after having entered a new value in a table cell, click in the "OK"-button that is beneath the JTable (which is in a dialog), the dialog closes as it should, but without the setValueAt running!!
This means that I cannot register the entered value unless the user explicitly clicks in another cell after having edited in a cell!
Please, if anyone has som clue that may help, let me know, I should't need to add a listener in the table, should I?
Best regards,
AC

Thanks a lot!
I'm at home right now and cannot try it until tomorrow, but from the method name it seems to be just what i was looking for!
Regards/
AC

Similar Messages

Open VI Reference Function won't execute in multi process application

I have a sub vi with Reentrant execution, and it has
recursive call on some cases.
It is very similar to OpenG VI “Read Key
(Variant)__ogtk.vi”, my sub vi works without any problem unit LabVIEW’s Two
Button Dialog is opened in other process loop.
I have attached a Test VI, and would like to understand why
would Loop 1’s Dialog box have any execution impact on Loop 2’s process?
Why Open VI Reference Function won’t execute when Two Button
Dialog is opened in other process?
LabVIEW version 8.6
Thanks,
Attachments:
Test Vi.zip ‏17 KB

Broken Arrow wrote:
LabVIEW's native dialog box is Modal. It will not let anything else run which requires (or MAY require) user input. In the case of your code, LabVIEW can't open a VI with a modal process going.
Broken Arrow thanks for your reply, but not sure if I understand Modal dialog box would cause the problem.
I already had a work around by using Three Button Dialog VI, and it is s Modal VI.
I would still like to understand, why would DataFlow halt at Open VI Reference Function in Loop 2 when I use when Two Button Dialog?
Attachments:
Test Vi 2.zip ‏20 KB

PHP won't execute on Dream Weaver testing server

I have successfully installed an Apache server and MySQL using Xampp. Using Dream Weaver (CS5.5) I've created .php pages which (after setting up the site and testing server) successfully connect to a database. However, php code on those pages won't execute. The pages only display the text code when IE or Firefox links to http://localhost/filename.php. Following is the Apache log file entries for those failed attempts. [Tue Jul 17 08:20:03 2012] [notice] Child 2656: Starting thread to listen on port 443. [Tue Jul 17 08:20:03 2012] [notice] Child 2656: Starting thread to listen on port 443. [Tue Jul 17 08:20:03 2012] [notice] Child 2656: Starting thread to listen on port 80. [Tue Jul 17 08:20:03 2012] [notice] Child 2656: Starting thread to listen on port 80. [Tue Jul 17 10:38:28 2012] [error] [client ::1] script 'C:/Program Files/xampp/htdocs/phpinfo.php' not found or unable to stat [Tue Jul 17 10:51:25 2012] [error] [client ::1] script 'C:/Program Files/xampp/htdocs/phpinfo.php' not found or unable to stat I've run out of ideas about how to solve this. Anyone?

If PHP is running in other locations, then it's a configuration issue with the server whereby PHP is not allowed to run in the folder you have specified. I can tell you filenames and areas to look for, but I'm personally have never found the XAMPP installation to be the most intuitive when it comes to editing which is why I pointed you in their direction.
If you look in the httpd.conf file, you should see a DocumentRoot defined. Make sure that the site definition is within that document root. There should also be a Directory declaration ( <Directory "/path/to"> ) that should match the path of your DocumentRoot. It is possible to serve documents from different areas of your computer. Ususally this is done when you have things like phpMyAdmin above the root, so if you see multiple entries in there, some of which XAMPP installs itself, you should leave them alone and ask their support forum for help because they will know which entries the application puts in that you will not want to remove.

Captivate 3 Published file won't execute JavaScript

Pulbished Captivate 3 course. Final screen has an exit button with the following script: ab_SetScoreStatus(100,'completed');ab_CloseWindow(); When I post the course to our LMS it uploads fine, but when I try and run the course I get an error when I click on the Exit button and it doesn't do anything. I had someone try the same thing on their computer and it works fine for them so I'm thinking it's something with my settings. This used to work for me but then I got a new computer so not sure if the settings (IE, Flash or ????) are different or what. I'm running Flash 10, and IE 8. Any help would be greatly appreciated. Thank you.

Good morning Rick, and thank you for trying to help.
Sheri Delaney
From: Captiv8r [email protected]
Sent: Wednesday, February 16, 2011 3:59 PM
To: Delaney, Sheri
Subject: Captivate 3 Published file won't execute JavaScript
Welcome to our community
See if the following links help.
http://forums.adobe.com/thread/473021#5
http://forums.adobe.com/thread/473021#10
Cheers... Rick
http://www.robowizard.com/pc.gif
Helpful and Handy Links
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5
http://www.ShowMeSolutions.biz
http://sorcererstone.wordpress.com/
http://www.gooberguides.com

.load method won't execute in published .swf

Hello
This line of code won't execute in a published .swf. Test movie (ctrl + enter) works fine.
j_session = new URLVariables();
j_send = new URLRequest("https://web.e-fon.ch/portal/j_acegi_security_check");
j_loader.load(j_send);
I'm assuming it's some type of network permission. Ideas?

upload to a server and test or add the file that contains that code to your trusted files.
also, you may need a cross-domain permissions file if that is a cross-domain request (if it's not, use a relative path) and you expect something returned to your flash.
also, you're not defining or sending any variables which may or may not be an issue.

New iPod, tried downloading software, but it won't execute

I just won this iPod at work, it's a 30 gb with color screen. I've tried following the instructions and downloading the software, and that all seems to work fine, but then when I try to execute it, I get a message saying "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." I've tried some of the fixes I found here, but nothing seems to work. Also, when I plug in m iPod, it just states "Do not disconnect". I had it connected all day, and that never changed. Is apple just having problem with their new version of software? Or is it something else? I have a fairly new lap top (Dell 9300 with Windows XP media edition). Thanks!

that all seems to work fine, but then when I try to execute it, I get a message saying "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
let's first check to see if this is associated with a problem with your QuickTime. (iTunes needs a properly functioning QuickTime in order to work correctly.)
try launching your QuickTime. does it:
(a) launch perfectly fine?
(b) fail to launch with an error message? (if so, what does it say?)
(c) exhibit other peculiar behavior? (if so, could you describe it for us?)

How do I install iCloud for Windows 7 using icloudsetup_exe Apple download that won't execute?

When I download the iCloud for PC application, Apple provides a non-editable file name icloudsetup_exe instead of a normal windows executable name such as icloudsetup.exe, so after double clicking on the setup file, Windows then asks what application to open this file with, instead of executing the setup file. Has anyone figured out how to make this work?

Yeah, I use Windows on bootcamp for both my Imac and my Macbook Pro.
In fact, seeing as my Mac partition on my external hard drive was successful i.e. I installed and can boot from them any time I like, couldn't I just use the external hard drive's partitions' bootcamp assistant and install/boot windows on there?

Compile fine in Netbeans, won't execute

After I compile my file in netbeans, i try to run it and get this error:
java.lang.NoClassDefFoundError: Game/src/game/Main (wrong name: src/game/Main)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
Exception in thread "main"
What does this mean? Anyone?
Here is my code
* Main.java
* Created on February 7, 2005, 12:34 AM
package src.game;
* @author Marcus
import java.util.Random;
import java.io.*;
public class Main
    public static void main(String[] args) throws IOException /** Creates a new instance of game */
        System.out.println("Welcome to LETS MAKE A DEAL!!");
     Random gen;
     InputStreamReader isr;
     BufferedReader buff;
     int user_door;
     int win_door;
        int open_door;
        int closed_door;
     int second_choice;
        String line;
        String line2;
     gen = new Random();
     isr = new InputStreamReader(System.in);
     buff = new BufferedReader(isr);
     win_door = gen.nextInt();
     win_door = Math.abs(win_door);
     win_door = 1 + win_door%3;
        open_door = 0;
        closed_door = 0;
            if (win_door == 1)
                /* when win_door = ? then set the other two variables to the other two unused values */
               open_door = 3;
               closed_door = 2;
            if (win_door == 3)
               open_door = 1;
               closed_door = 2;
            if (win_door == 2)
               open_door = 1;
               closed_door = 3;
        System.out.print(" Which door do you want to choose?");
        System.out.print("Door number 1, 2 or 3? ");
        line = buff.readLine();
     user_door = Integer.parseInt(line);
          if (user_door != win_door )
               System.out.println("Behind door " + open_door + " is a Booby prize! ");
                        System.out.println("You have chosen door " + user_door + "");
                        System.out.println("Do you wish to switch to door? " + win_door);
                        System.out.println("Enter 1 for yes, and zero otherwise" );
                        line2 = buff.readLine();
                        second_choice = Integer.parseInt(line2);
                        if (second_choice == 1)
                            user_door = win_door; // Then change user_door to value of win_door
                        else
                            user_door = user_door; // Else you do nothing
                        System.out.println("Your final choice is door " + user_door);
                        System.out.println(" The good prize is located behind door" + win_door);
          if (user_door == win_door )
               System.out.println("Behind door " + open_door + " is a Booby prize! ");
                        System.out.println("You have chosen door " + user_door + "");
                        System.out.println("Do you wish to switch to door " + closed_door + "?");
                        System.out.println("Enter 1 for yes, and zero otherwise" );
                        line2 = buff.readLine();
                        second_choice = Integer.parseInt(line2);
                        if (second_choice == 1)
                            user_door = closed_door; // Then change user_door to value of closed_door
                        else
                            user_door = user_door; // Else you do nothing
                        System.out.println("Your final choice is door " + user_door);
                        System.out.println(" The good prize is located behind door" + win_door);
        if (win_door != user_door )
               System.out.println("Ach, you got the Booby prize! ");
                else
          System.out.println("Congratulations! You won!");
}

According to netbeans, your package should be
Game.src.game

CALL TRANSACTION won't execute report, keeps returning to program

Good day to you!
I have the following code:
CALL TRANSACTION 'FPO4' USING bdcdata
MODE 'A'.
The last line in my bdcdata is to simulate pressing the Execute button (OK_CODE = '=ONLI'). However, instead of running the report that FPO4 is supposed to generate, it just comes back to my program and its selection screen.
Please note that although I am populating data on FPO4's native Selection Screen, I am also populating data on a special "predefined selection," so using a simple SUBMIT has never been an option to me.
Does anyone know how I can get FPO4 to actually execute vs. coming back to my program?
Thanks -- as always, points for all helpful answers!

Before calling the call transaction, put a dummy screen of the report output
' ' 'OK_CODE' '=ONLY'.
*This screen name nad number should come in the SHDB recording..
*Don't assing any OK_CODE to that screen
Perform screen 'X' 'SAPMSSY0' '0120'. "<< it should be your reports screen
CALL TRANSACTION 'FPO4' USING bdcdata
MODE 'A'.
Actually, I dont' have this transaction in my systm otherwise I should able to give you exact screen name and number.
Regards,
Naimesh Patel

Lightroom 6 won't execute after installation. Previous versions do.

I just installed LR 6 from CC. It might be a permission problem. Using Windows 8. Other versions of LR, Photoshop and Bridge are OK.

Thanks for the reply.
There are no messages. Using Windows.
As an example, C:\Program Files\Adobe\Adobe Lightroom 5.7.1 is the location for Lightroom 5.7.1. I have pinned it to the task bar. Click on the icon and 5.7.1 executes. If I double click on C:\Program Files\Adobe\Adobe Lightroom 5.7.1\lightroom.exe I can execute LR 5.7.1, just as I would expect.
However, if I try the same with LR 6, which is located in C:\Program Files\Adobe\Adobe Lightroom, nothing happens. It is also pinned to the task bar. Click on the icon on the task bar, or on the desk top, and nothing happens. No message, nothing.
Task Manager indicates the only program running is Firefox, my browser.

Illustrator CS2 won't execute scripts under Vista.

Dear group.
I would like to hear if anyone has experienced weird behaviors by Illustrator CS2 when running scripts (written in JavaScript) under Windows Vista? By "weird" I mean that at the execution of the code, it may complain that a closing bracket is missing and other errors. It seems to run fine when executing the script in ExtendScript Toolkit, and Illy CS2 didn't exhibit such problems under WinXP SP2.

I'm no system expert, Mylenium. Here's what I can tell you: yes, I did try the installation as the administrator. No luck. Didn't know to turn off aero or switch to a different theme, so haven't tried that. Don't know what UAC is, so can't (yet) turn it off. Here's the thing: all of the other parts of the suite installed. The setup.ini file for both Illustrator CS2 and InDesign CS2 contains the following:
[SupportOS]
Win95=1
Win98=1
WinME=1
WinNT4=1
Win2K=1
InDesign installed; Illustrator did not because the OS "was not supported," or words to that effect. Unless "WinNT4" is code for Windows XP, these programs shouldn't have installed on an XP system, yet they did.
System CPU is an AMD Phenom 9600 quad-core. 6 GB RAM. What else would you need to know?

Certain Runbook won't execute from SCCM 2012 R2 w/ MDT 2013

We have SCCM 2012 R2 and SCOrch 2012 R2.
There's an OSD TS that has many runbooks. 90% of the time everything runs fine, but there's 10% of the computers that would fail on a specific runbook (while executing other runbooks just fine).
There's no log history that this runbook had ever been executed on these clients
Unexpected response from web service: 400 Bad Request
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<error xmlns="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata">
<code></code>
<message xml:lang="en-US">Error reading syndication item: 'An error occurred while parsing EntityName. Line 1, position 852.'.</message>
</error>
FAILURE ( 10801 ): Unable to create Orchestrator job for the specified runbook.
Now if I run the runbook directly from web services and type in the parameters manually, it runs fine.

We're you able to find a solution? I'm running into the same error...

ITunesSetup.exe won't execute

Trying to upgrade my iTunes 8 to iTunes 9, and since my iTunes didn't automatically detect the update I went and downloaded the setup.exe from the iTunes website (made sure it was the right one, 9.0.1 for Vista etc etc) and when I try to run the iTunes 9 installer it doesn't execute. There's no timer. I've tried running it as an administrator but even that doesn't work. Any soloutions please?

Hi kreuger,
This article might be of some help with that VBScript error message:
iTunes and QuickTime for Windows XP cannot be installed without Visual Basic Script (VBScript)
-Kylene

Live view test server won't execute php scripts

Hello everyone!
I've had a web developer design a site for me based on php.
Rather than bother them for simple image changes and content
updates, I'm trying to learn to do those things myself. I'm very
new to Dreamweaver and I'm having difficulties getting php script
to execute through my test server. I have the latest versions of
Dreamweaver, MySQL, php, and Apache installed on my machine. I've
downloaded the source files off of my hosting server. The problem
is when I try to "Live View" the "index.php" off of the root file
on the test server, Dreamweaver gives me an error that says:
"The testing server did not execute any of the scripts in
your document. Possible explanations include:
1.> The test server is not running
2.> The test server ignores files with .php. in the
extension
3.> The documents did not contain any scripts."
I know my system is working properly because I created a page
"timetest.php" with the following code:
<p>This page was created at <b><?php echo
date("h:i:s a", time()); ?></b> on the computer running
PHP.</p>
...and it works fine in "Live View".
Any ideas what the problem might be? I've been reading books
and searching online and I haven't been able to figure it out.
Here's what the code on "index.php" looks like:

What happens when you view your page on your test server in a
browser?
Are the php scripts executed?
Also, the macromedia.dreamweaver.appdev forum is a more
appropriate
place for this question, so you might get a better response.
Randy
> "The testing server did not execute any of the scripts
in your document.

Jar file won't execute

I have written a program to manipulate an access database, it works fine from Eclipse but when I create a jar file using Jarbuilder 0.8, this jar file wont execute. It returns
Exception in thread "main" java.io.IOException: invalid header field
at java.util.jar.attributes.read(Unknown Source)
at java.util.jar.Manifest.read(Unknown Source)
at java.util.jar.Manifest.<init>(Unknown Source)
at java.util.jar.Jarfile.getManifest(Unknown Source)
The whole set of classes is online together with the database at users.skynet.be/NewOne/Televisie.rar (with Hoofdvenster as Manifest)
and the jar file at
users.skynet.be/NewOne/Televisie.jar
I was wondering, do I have to include anything special because i m working with an ODBC here, or what else could be the problem ?
All comments and suggestions are welcome, thnx in adance !!

Hi there!
After a brief look at your manifest a saw that you specifie the path to your main-class like this:
Main-Class: gui/Gui
...and when you make the jar-file you type:
jar cmf Manifest.txt JAppointment.jar Gui/*.class ...etc..
Remember that Java is case-sensitive and look at "gui" and "Gui" differently!
Maybee that could be the problem?
/Andrew

SetValueAt won't execute

Similar Messages

Maybe you are looking for