Several times after restarting Final Cut X was very slow and it always kept repeating rendering on same three clips. Later it stops rendering on every restart and the machine was normal and faster. Now it keeps crushing on every restart

My Final Cut X changed behaviour after conneting the external monitor via HDMI. Several times after restarting Final Cut X was very slow and it always kept repeating rendering on same three clips after every restart. Later the dual screen icon disapeared on the top of my screen and it stops rendering on every restart like before and the machine was normal and faster. Now Final Cut won't start anymore whenever I start it loads and crushes immediately on every restart.

Upgrade FCPX

Similar Messages

I have been using Safari for years and have always kept it on "private." Starting two days ago, I suddenly found myself unable to log onto my blog and many other sites that I normally log onto when private is set. Why?

I have been using Safari for years and have always kept it on "private." Starting two days ago, I suddenly found myself unable to log onto my blog and many other sites that I normally log onto when private is set. This so annoying, I just switched to Firefox. I don't like Firefox nearly as much as I like Safari. What is happening? How do I fix the problem?
Thank you.

Might be a corrupted database ...
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

Slow Rendering Time After Installing Final Cut Studio 2 Upgrade

I have a Mac Pro with two dual core processors, 8 GB of Ram, and 1 Terabyte of storage. I'm running the latest version of OSX. Ever since I upgraded to Final Cut Studio 2 my rendering time in Final Cut Pro 6 has become painfully slow. For example, it now takes at least an hour to render a short 5 minute video project. A project that size used to take just a few minutes. I uninstalled Final Cut Studio using AppZapper because I couldn't figure out how to remove the program any other way. Then, I reinstalled Final Cut Pro 6, but it didn't fix the problem. I called Apple's Final Cut Studio tech support, but they just had me upgrade Final Cut Pro 6 to 6.0.1. Unfortunately, this didn't fix the problem. Everything worked fine with Final Cut Pro 5, but ever since we upgraded everything has fell apart. Can anyone give us any insight into fixing this problem? So far, Apple's Final Cut tech support has been unable to find a solution.

Just a couple things to double check.
1. Repair Disk permissions, RESTART.
2. Try setting your RENDER DRIVE to something Different than the Media drive, RESTART.
3. Try Hosting your Media on a new Drive, RESTART.
Also, at this point since you are having system problems, I would backup all of your Media, Projects, etc. I just read a post of someone else that didn't have backup of their project and it became corrupted. I use Lacies SilverKeeper to automatically backup about 20 times a day, so we have dupes of at least all our Projects. And the first thing I do every morning is start the system up, repair disk permissions, and RESTART.
The reason why I suggest restarting after each attempt at changing preferences and such is so that the next time you load FCP it loads the settings that you have saved/changed as native settings as opposed to changed settings, this does make a difference. You will know what I am talking about if you have experienced the Log & Capture Input problem for FCP 5.
Let me know, I have some other suggestions if these don't work.

Final Cut Pro running very slow

I've just re-installed OSX 10.3.9 and Final Cut Pro was the first program I put back on. But it's now running incredibly show - 12 hours to render 4 minutes. And any time I click anyhere, whether in the timeline or menu bar, there's a few seconds lag and often the pinwheel will come up. I have 50+ GB free space, 2GB Ram, running on a Powerbook G4.
ANY ideas as to why it's so slow? How I might fix this?

Just so you know, anyone who has any advice OTHER than not using mp4... using mp4 will take an inordinate amount of time to work with. As previously mentioned, mp4 is a delivery format, not an editing one. It is highly compressed, and editing with compressed material takes longer than it does to just convert to an i-frame only codec. Mpeg4 takes an especially long time, as compared to mpeg2 conversion, and can tie up Compressor for a long time. Use Streamclip to convert before editing. Your render times are correct for rendering an mp4 clip on a powerbook G4.

I have recently update my Final Cut Pro X to Final Cut Pro X 10.1. I downloaded the update from the app store. Now every time I open Final Cut it crashes almost instantly. What can I do

I have recently update my Final Cut Pro X to Final Cut Pro X 10.1. I downloaded the update from the app store. Now every time I open Final Cut it crashes almost instantly. What can I do?- I really need help!

It sounds as though you have a corrupt project - or possibly a file within an event that is causing the application to crash.
Quit FCP X, then move your projects and events (if you have any) to new folders so that FCP X doesn't find them, then relaunch the application. If it launches OK, there's a very good chance one of your projects or events is causing the problem.
Quit the app again, then move one event or project at a time back to the original folder and launch FCP X again - keep going until you find the cause.
Andy

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have

I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch. But, Notes will not stop. It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.

Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.

My final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help

my final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me. I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5

What did Apple tell you about what they did (or did not) find here?
See if working on the main disk is any faster.
USB2 is glacial, as I/O interconnects go. And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too. FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't.

After Maverick, Final Cut 7 don't play and crash

After install a clean mavericks, final cut 7 runs without sinc, stop, crash. I have a Blackmagic and update too for mavericks. Disapoint, very disapoint!!! Apple Final Cut Pro X is terrible and Final Cut 7 don't work now!!!

You have to do more than delete the receipts, you
need to reinstall Quicktime. Do ALL of these steps.
Go to /library/receipts and delete any files
that say Quicktime followed by a number e.g.
Quicktime703.pkg
Go to the
Apple quicktime site and download the appropriate
version of Quicktime to your hard drive.
Run the Quicktime installer.
Repair Disk Permissions for your System Disk (Disk
Utility > Select the system disk > Repair Disk
Permissions)
Reboot
Also, just because the Capture window says "preview
disabled" does NOT mean you are crippled. Look under
the window, if it says 'vtr ok' you are good to go.
good luck
x
Thanks so much for the prompt response.Did all that you advised except the part about Repair Disk Permissions. Unable to locate this. Should this be located on my original install disc? Sorry for being so obtuse. I'm a better editor than computer tech.
Also, I can get to Log & Capture but a black box with a message 'Waiting for Time Code' pops up. Then another message which says 'This operation cannot be completed as there is no Time Code followed by the Spinning Ball.
Also I'm using a Dazzel Box as an interface between my Sony DV player and the G5 and external Panasonic Monitor. Any further help would be greatly appreciated.

Strange Window at start-up after installing Final Cut Studio 2

After installing Final Cut Studio 2, everytime I start up I get a window with the Final Cut icon in it And the following text:
Alert Title
Alert: something happened
At the bottom are two buttons:
Cancel and OK

I had the same thing, in my startup items was something called "alert" i deleted it... no more "nothings happened" a few people had this problem and have now solved it !
Yay i solved something for people!
jas

Recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of

recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of images I usually take on a weekly basis. I bought a new faster laptop but when I looked for the cd with the software and serial I could not find it in the Xmas clutter. I downloaded a trial version of lightroom and got it working on my new laptop. Is there a way to access the serial number from my previously installed version and insert it into the trail version to make it work for me?
Myron

Mea culpa
While i registered all my cs2 thru 6 versions and my lightroom 2 thru 4 versions and recorded the serials and saved the adobe registration emails. Since this came as a freebee with the camera i neglected this vital step. I have the instslled version on my old laptop but want to install it on my new one. Thanks to Jim Hess I got the serial so all is well in my world and I will register it with ADOBE
Myron

I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?

I cannot download Mavericks. Every time the file download stops a message appears that says the file is damaged and cannot be used to install Mavericks. I delete the file, download again and the same message appears. What can I do?

I only have one video project that I ever published to iDisk. It didn't have any music or photo files attatched to it, just a few clips stitched together. I can play these clips right now in the Event Library (so I know the source files are on my computer), but strangely, under the Project Library, the project is not there. I'm almost certain that I didn't store the project on iDisk; I just completed the video and published it to iDisk (as a .mov file I think) for family to see. I've tried to figure out how to get iDisk to stop looking for this project to no avail.
I don't know if others have experienced this, but if I click on any project and on the menu bar select Share --> Remove From --> Media Browser... it lists iPod, iPhone, iPad, tv, Computer and MobileMe. Why would MobileMe be an option here? This is the case for any video project I select. Didn't iLife '11 and/or OSX 10.8 remove all mention of MobileMe? I wonder if this is part of the problem too.
Edit: I just removed every project I have from the Media Browser. Still no luck.

I installed the latest iTunes update. Now iTunes won't recognize my iPod. I tried every step in the trouble-shooting list and nothing works. Apple wants to charge me $35 just to ask them a question. What should i do?

I have tried every step in the trouble-shooting list, and nothing helps. What should I do?

I am having this same issue. I have avoided updating it for months and now that I finally did this is what happens!! My Ipod goes into charge mode, but then as soon as iTunes opens up to sync it says it knows there is an ipod connected but does not recognize it and it will stop charging and just go to the main screen that comes up when you turn ipod on. I even tried Uninstalling and reinstalling like it says and that doesn't work. When I uninstall it, it will let my ipod charge when I connect it to computer. But as soon as I install iTunes again and try to connect it, it tells me the same thing. Now I know why I never update to newer versions, so angry right now. Apple needs to fix this problem cause I've had my ipod for less than a year!!

HT201210 My iphone was updating to IOS6, then I thought by turning off my iphon it will cancel the update. It did, but now it keeps turning on but not compleely only until the apple sign shows up then turns off. Help please!

My iphone was updating to IOS6 from IOS5, then I thought by turning off my iphone it will cancel the update. It did, but now it keeps turning on but not compleely only until the apple sign shows up then turns off. Help please!

You will have to try putting it in DFU mode and allowing it to update. Once it has begun, you can't stop it.

I keep getting a dialogue box asking for my iCloud ID number on my Mac. I have to put it in several times before it finally accepts it. However, mu iCloud is working anyway.

I have a MacBook Pro, using Mavericks. A couple of days ago, a box keeps popping up asking for my iCloud ID. I have to put it in several times before it finally accepts my ID. However, when I just get frustrated and cancel it, my iCloud still works anyway. Is anyone else having this same problem?

If the setting is greyed out perhaps you have restrictions enabled that would prevent someone from changing accounts. Settings>General>Restrictions>Allow Changes>Accounts.

Toshiba Satellie L655-s5191 freeze several time after update the Bios from 2.3 to 2.8.

satellie l655-s5191 freeze several time after updating bios

If the RAM and HDD have been ruled out, then it is either a motherboard or CPU issue, and would require service to repair.
Qosmio X875 i7-3630QM, 32GB RAM, OCZ SSD Qosmio X505 i7-920XM, PM55, 16GB RAM, OCZ SSD
Satellite Pro L350 T9900, GM45, 8GB RAM , Intel 320 SSD (my baby) Satellite L655 i7-620M, HM55, 8GB RAM, Intel 710 SSD (travel system)

Several times after restarting Final Cut X was very slow and it always kept repeating rendering on same three clips. Later it stops rendering on every restart and the machine was normal and faster. Now it keeps crushing on every restart

Similar Messages

Maybe you are looking for