SFC label not readable how to copy the data to new SFC in panel product

We have one SFC label that is not readable. We know the serial number but how to re-label the product with new SFC and copy the data from the previous one?
Problem is that the SFC is for panel product with three locations and all locations have assembly and NC data.
Any ideas?

I would suggest to test using the SFC Reassignment activity or Re-label activities.

Similar Messages

How to copy the data of one node to another of the same context

hi experts,
 i need to copy the data of one node to the other node of the same context.
the source node is a model node ( i.e comming from RFC ) and the destination node is a value node which i have creted.
what i have done is.
i have read the source node using wizard
do.
elem_t_p0591 = node_t_p0591->get_element(
 index = sy-index ).
 IF ( elem_t_p0591 IS INITIAL ).
 EXIT.
 ENDIF.
elem_t_p0591->get_static_attributes(
 IMPORTING
 static_attributes = stru_t_p0591 ).
IF stru_t_p0591 IS NOT INITIAL.
 wa_p0591 = stru_t_p0591.
 APPEND wa_p0591 TO itab_p0591.
 ENDIF.
ENDDO.
and then i am trying to read the destination node so the tha data i have got by above method can be binded to the destination node.
but when i am trying to get the child node it is giving me a dump saying that
'Access via 'NULL' object reference not possible' i understand this because when i debug my value node is becoming initial, and when i am trying to access the destination node using this initial node it will give me a dump,
but what is the work aroud for this.
Plz help.
Regards,
Santosh.

Hi Santosh,
 I tried replicating your behaviour in my system. This is what my context structure looks like:
Node_Test (c-> 0:n)
Name(attribute)
Node_Test2 (c-> 0:1)
 Name2(attribute)
Now when i try to access Node_Test2 then it returns me (initial) i.e. no reference and i believe the reason is that my parent node, Node_Test, is of type table( because of the cardinality) so I am expected to perform an operation on my sub node, Node_Test2, based on the node i have selected, or have specified via index .. 1 is taken by default, in Node_Test.. which in WDDOINIT is initial as i havent got access to my view yet.. so instead what you can do is bind data to your parent node, relevant data ofcourse, and then bind the recieved data to your child node i.e. Node3.
I am pasting the code here for your reference :
method WDDOINIT .
 DATA:
 node_test TYPE REF TO if_wd_context_node,
 elem_test TYPE REF TO if_wd_context_element,
 stru_test TYPE wd_this->element_test ,
 lt_table LIKE TABLE OF stru_test,
 item_test_1 LIKE stru_test-test_1.
 navigate from <CONTEXT> to <TEST> via lead selection
 node_test = wd_context->get_child_node( name = wd_this->wdctx_test ).
 @TODO handle not set lead selection
 IF ( node_test IS INITIAL ).
 ENDIF.
 get element via lead selection
 elem_test = node_test->get_element( ).
 @TODO handle not set lead selection
 IF ( elem_test IS INITIAL ).
 ENDIF.
stru_test-test_1 = 'Anoop'.
APPEND stru_test to lt_table.
stru_test-test_1 = 'Avi'.
APPEND stru_test to lt_table.
stru_test-test_1 = 'Sid'.
APPEND stru_test to lt_table.
CALL METHOD node_test->bind_table
EXPORTING
 new_items = lt_table
 set_initial_elements = ABAP_TRUE
 index =
 DATA:
 node_t2 TYPE REF TO if_wd_context_node,
 elem_t2 TYPE REF TO if_wd_context_element,
 stru_t2 TYPE wd_this->element_t2 ,
 item_t2_1 LIKE stru_t2-t2_1.
 navigate from <CONTEXT> to <TEST> via lead selection
 node_test = wd_context->get_child_node( name = wd_this->wdctx_test ).
 @TODO handle not set lead selection
 IF ( node_test IS INITIAL ).
 ENDIF.
* navigate from <TEST> to <T2> via lead selection
 node_t2 = node_test->get_child_node( name = wd_this->wdctx_t2 ).
* alternative navigation via index
 Node_T2 = Node_Test->get_Child_Node(
 Name = `T2` Index = 1 ).
 @TODO handle non existant child
 if ( Node_T2 is initial ).
 endif.
 get element via lead selection
 elem_t2 = node_t2->get_element( ).
 get single attribute
 elem_t2->get_attribute(
 EXPORTING
 name = `T2_1`
 IMPORTING
 value = item_t2_1 ).
endmethod.
I hope this helps.
Regards,
Anoop

How to copy the data in a cube to another cube

Hi ,I created one cube by copying.Now I want the data available in earlier cube to Copied Cube.Plz can any one help in this.
Thanx in Advacnce
Vasu

You can use the export datasource option to copy the data.
Another option is:
The steps for copying the contents of one cube to another:
1. Go to Manage -> Recontruct of the new cube.
2. Select the "selection button"(red , yellow, blue diamond button).
3.In the selection screen you can give the technical name of the old cube, requests ids you want to load, from & to date.
4.Execute and the new cube would be loaded.
Its all that easy!!!!!!
Refer this link:
Copying the structure of an Infocube

How to copy the Data From Oracle Table To SAP Table

Hi Friends,
We need to copy the data from Oracle Database Table to SAP Table. The data should be updated simultaneously in both tables . Should I write a program that contains the native sql statement like EXEC SQL PERFORMING WRITE,....
I appreciate any suggestions regarding this.
Regards
CSM Reddy

Hi,
since you posted this question in the DB2 forum I assume that you are using a DB2 database for your SAP system.
To access a table from a legacy ORACLE database you may use the DBSL multiconnect feature. I.e. you open a secondary connecction in the SAP system to your ORALE database. You can then ready the data from the ORACLE database into an ABAP internal table and insert it afterwards into the DB2 table on the main connection.
Another way to access an ORACLE table from a DB2 database is to use the DB2 federated database feature. This requires a little bit more DB2 skill. With this feature you can make the ORACLE table visible within the DB2 database. To copy data you can then simply use a "INSERT ... SELECT" statement.
Regards
Frank

How to copy the data from one database to another database without DB link

Good Day,
I want to copy the data from one database to another database with out DB link but the structure is same in both.
Thanks
Nihar

You could use SQL*Plus' COPY command
http://technology.amis.nl/blog/432/little-gold-nugget-sqlplus-copy-command
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/apb.htm#sthref3702
Edited by: Alex Nuijten on Sep 16, 2009 8:13 AM

How to delete the data in New data table Because...

Hi all,
I have an urgent issue :
in the process chain DSO has finished a delta load with 18592 data entries transfered and added, and activated , but when I checked New data table , there are still 18592 data entries there. This will cause problem I think, because this chain has to run daily, so next run will make the data in new data table added twice, so could you pls let me know the way to delete data in new data table?
thanks in advance

Dear Ryan Zhang ,
When activation DSO will automatically clears New table and places records in active table and change log table.
If records still exist in New table means it has not activated properly.
Check in active table and change log table if any entries are found.
If not ,try activation again.
If entries are there in active table then try these
Go to SE14
Give the active table name..
Click on Edit
Click on activate and adjust database.
Load again and try to activate.
Hope it helps
Regards
Bala

How to recover the data from a dropped table in production/archive mode

How to recover the data/change on a table that was dropped by accident.
The database is on archive mode.

Oracle Version. ? If 10g.
Try this Way
SQL> create table taj as select * from all_objects where rownum <= 100;
Table created.
SQL> drop table taj ;
Table dropped.
SQL> show recyclebin
ORIGINAL NAME RECYCLEBIN NAME OBJECT TYPE DROP TIME
TAJ BIN$b3MmS7kYS9ClMvKm0bu8Vw==$0 TABLE 2006-09-10:16:02:58
SQL> flashback table taj to before drop;
Flashback complete.
SQL> show recyclebin;
SQL> desc taj;
Name Null? Type
OWNER VARCHAR2(30)
OBJECT_NAME VARCHAR2(30)
SUBOBJECT_NAME VARCHAR2(30)
OBJECT_ID NUMBER
DATA_OBJECT_ID NUMBER
OBJECT_TYPE VARCHAR2(19)
CREATED DATE
LAST_DDL_TIME DATE
TIMESTAMP VARCHAR2(19)
STATUS VARCHAR2(7)
TEMPORARY VARCHAR2(1)
GENERATED VARCHAR2(1)
SECONDARY VARCHAR2(1)
SQL>M.S.Taj

How to copy the Data from BW 3.X to BI 7.0?

Hi,
Once the objects have been migrated to the BI 7.0 System from BW 3.x, How the data will be copied to the BI 7.0 System from BW 3.x?
Thanks,
Veerendra.

You can't copy data from one version to another version after Upgrade.
What is your system/landscape scenarios? Did you upgrade 3x to BI 7 on same system or different system?
If same system - data is there after upgrade also. Just migrate and test.
If different system and you did not do a system copy, you need to load data again.
Talk to your basis guy and aks how tghey upgraded.
Hope it helps..

How to copy the XY graph on labview front panel and insert into Excel using labview

Hi all,
The XY graph display on LV front panel after test. How can I copy this XY graph and insert into excel file?
Thank you very much for your help.
Khanh

KPRO wrote:
Hi,
I refer to insert it into excel since report is in excel format, but if it's too hard to do so I can save it in another format.
Either way, will labview support this? Anyway, thank you very much for your quick reply.
Khanh
You are already using the Report Generation Toolkit? There is the "Append Control Image to Report.vi" that would make this easy.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How to determine the data content of the uploaded PDF from local

Hi,
I have a requirement wherein I will create a new program to upload PDF(contains contract information) from my local directory. Then base on the data in the PDF, I need to perform some contract validtion with SAP. The problem is, I do not know how to extract the data in the PDF. How to do so?
Thanks for your inputs.
Regards,
Marc

Hello Marc,
As we know in conventional ABAP when PDF file is read, SAP converts into binary format which is not directly readable. There are various applications which converts PDF to Text files, using these tools PDF file can be converted, uploaded and read the data.
SAP Portal technology gives reading PDF files option.
http://help.sap.com/saphelp_nwce711/helpdata/en/dc/f1783fe3263042e10000000a114084/content.htm
Pls have a look at page 11
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9913a954-0d01-0010-8391-8a3076440b6e
Regards,
Nishikant.

How to delete the data in the compressed infocube

hi, bi gurus
we are facing a problem in inventory management the info cube in BW production
normally every time inventory cube gets compressed that means the data will be moving to F fact table to E fact table
now the problem is we are having some bad data for latest five requests in this cube as we all know compressed data
can't be delete by deleting request in the request tab the only way is go for selective deletion but i don't find any selective
option in the cube we are PSA data for that five request which having correctdata please help how to delete the bad data in the
info cube and load the correct data which we are having in PSA
Thanks
Joe

Hi André
Thanks you for ur answer
what i am telling is their is an option for selective deletion for inventory cube
but i don't find any specific option to delete the data that means like calendar day like that
i hope you got my question.
hi Saveen Kumar,
Thank you again
we are using 3.xx flow if we do the request reverse posting for all the 5 requests which has updated incorrect data
next we need to do compression also or not
and how to reload the data from PSA to Infocube becuse if request still avaliable in info cube it will not allow me to do that
can you please tell me detail how to proceed in step by step this is first time i am doing request reverse post and i have to do it production please tell me
Thanks in adavance
Thanks,joe

How to Audit the data displayed within a Webi report

Hi All,
We have BOBJ XI R2 SP4 installed on our server.
One of the requirements is to audit the data the user has viewed through Canned reports and also Adhoc reports created in Webi.
I understand that we can audit what reports are accessed by the user, but not sure how to audit the data within the report. Could someone please let me know if auditing data can be acheived form SDK ? If so how ?
Thanks,
Sireesha

Pablo,
The following should get you started;
This is a report to pull Universe Name, Report Name, Action Time (last refreshed), Action Duration (execution time), User Name and Object Name (universe objects used in reports).
The Result Objects are as follows:
Object Name from Actions/Action Details
Action Time from Actions
Action Duration from Actions
Action Type from Actions
Action Type Detail from Actions (detail object associated with Action Type)
User Name from Actions
Document Name from Actions/Document
Universe Name from Actions/Action Details
The Query Filters are as follows:
Action Time between Day1 And Day2
Note: The Query Filter is necessary (obviously) only to restrict the size of the query. I wouldn't run this query without a filter on demand. Depending on the size of your deployment, you might want to restrict the query initially to a specific universe/list of universes while testing.
At the report level, I moved Universe Name and Document Name in to (nested) sections.
i.e.
Section on: Universe Name
Section on: Document Name
Table
Another option would be to retrieve this information from the CMS tables using WID Scanner [here|http://www.forumtopics.com/busobj/viewtopic.php?t=80856]
The last option would be to use the Report Engine SDK (for Webi) to write a program extract this information from the CMS tables and pass it to another table. WID scanner (above) does effectively the same thing, passes the info to an MS Access table (if I remember correctly..I may be wrong. I have'nt used it since it last tried to create a report to extract all used objects.)
Best,
Srinivas

Copy the data from first line while dynamically adding a new line in table

Hi,
1. There is a table
2. An add button adds a new line to the table using 'AddInstance'
3. A record is entered in the first line
4. When the add button is clicked it adds a new line and along with it copies the data entered in the first line
My question is how to copy the data from the first line and show it in the new line added. This is required so that user can use most of the common values in the first line.
Thanks,
Nikhil

You can use the following Java Script in the Click event of the button.
// Get the number of rows in the table
var nrows = xfa.resolveNodes("page.table.DATA[*]").length;
// Add a new instance(row) to the table
page.table.addInstance.instanceManager(1);
xfa.form.recalculate(1);
// Copy the values from the first line to the newly created row
page.table.DATA\[ nrows \].field1.rawValue = page.table.DATA\[ 0 \].field1.rawValue;
..........field2
..........field3
Thanks,
Chandra Indukuri

How to change the date path of Web Server to my system time?

Hi,
I have downloaded a Countdown SWF file from the Internet. It is working fine with the Computers which have Internet Connection. But not working without Internet connection because of the following line of code in XML file:
<PHPurl>http://www.flepstudio.org/utilita/CountDown/gettime.php</PHPurl>
When I opened the webpage using the above code, it shows time in a typical digits:
Monday, October 18, 2010 9:12:52 PM in my System -shows in Web browser like : time=1287425579
How to modify the code so that I can use my System time to work with Countdown without Internet Connection.
The following is the path from where I have downloaded the Countdown file:
http://www.flepstudio.org/forum/flepstudio-utilities/2960-flash-cs3-countdown.html
Please help me to run this countdown without internet access.
Thanks.

It appears all that php file does is return a time=value variable. So you need to see where that time variable is implemented in the Flash file and assign it a value using the Date.getTime() method instead of having the PHP file get called into play. Look in the help documents or Google if you do not know how to use the Date class.

How to sent the data reading in labview to excel datasheet

Hi,
I have aquire the current input from Cb68LP connector block to the labview.Thank a lot
But I not sure how to sent the data to the excel datasheet(with row and column).
thank

Hi.
You can save your data as "Spreadsheet-File". I my case I aquire digital data.
the channels are the rows and the pattern are the columns.
The Spreadsheet-File you can save as .txt then you can open it directly
in Excel.
Attachments:
wf.JPG ‏194 KB

SFC label not readable how to copy the data to new SFC in panel product

Similar Messages

Maybe you are looking for