SFv120 - tip /dev/ttya into it produces output, but can't type

Hi,
This sounds elementary but I can't figure it out and the brain isn't functioning well at 1:20am.
I've got a v120 that did not have a console on it, so I connected a cable from a v880's serial to the serial A/LOM port on the v120.
I'm getting text displayed when I tip to it (tip -9600 /dev/ttya) but I cannot type.
Connecting the serial cable to serial B produces no output.
Thoughts?
Thanks.

Figured it out, it was a bad LOM card in the v120.
After I reset, I could use #. to get out of the console back into the LOM command line.

Similar Messages

I am trying to retrieve music that I had from an iPad to my iTunes account. I'm using the same computer for synching my iPhone. I'm logged into my iPad account, but can't retrieve music. It only recognizes my iPhone.

I am trying to retrieve music that I had from an iPad to my iTunes account. I'm using the same computer for synching my iPhone. I'm logged into my iPad account, but can't retrieve music. It only recognizes my iPhone. Does anyone know how I can get my music? I know longer own the iPad so I don't have access to it, but I don't think that should be a problem.

So you had music on the iPad that is not in iTunes and you no longer have the iPad. Is that what you are saying? If that is what you are saying, iTunes won't "recognize" anything that was on the iPad, that was not purchased from iTunes. If the music was purchased from iTunes, you should probably be able to download it again for free as long as you are using the same Apple ID that you bought it with. Did you try downloading the music again?
Am I understanding what it is that you want to do? If I am understanding you correctly, you will find this to be useful.
Downloading past purchases from the App Store ... - Support - Apple
I admit that I'm a little confused by your remark about being logged into your iPad account. You should be logged into your iTunes account.

I can log into my iTunes account but can not access my account details, what's wrong?

I'm starting a new discussion here even though there is really nothing new to add to this discussion:
https://discussions.apple.com/thread/3572699?start=0&tstart=0
I can sign in to iTunes with my apple ID no problem. However when I click account from the drop down menu (by my ID in the right hand corner of the iTunes screen) I get a sign in window in which my ID is filled in but it wants my password which I duly fill in . At this point the window just keeps coming back up for me to fill in. If I fill my password in wrongly I get red text telling me so.
So basically I can't view my account details even though I'm clearly logged in. I'm increasingly worried because If I can't access my iTunes account data how do I know my credit card is not being used by someone else?
I'm guessing it's a problem specific to my machine (MBP running up to date Lion) I'm wondering if it could be connected to the safari cookie problem that affects other issues with pop up windows as documented (and solved) here:
https://discussions.apple.com/thread/3502463?start=45&tstart=0
Only I don't have that problem any more!
Help would be very much appreciated.

Problem solved!
I started to suspect that the problem was with my computer rather than the apple servers.
Reparing disc permissions from Disc Utility seemed like an obvious thing to try but I thought I had done this without it working. However on OSX daily I read..."In mac OSX Lion repairing permissions from the Disk Utility app doesn’t repair the users file permissions"! Hmm nice one Apple- reparing permissions does not repair permissions! It seems that you have to use disc utility from recovery mode.
I then followed these instructions on OSX daily (dot com)
Repairing a Mac Boot Disk with Disk Utility & OS X Lion
Reboot the Mac and hold down Command+R (To boot into recovery)
Select “Recovery HD” at the boot menu
At the Mac OS X Utilities screen, select “Disk Utility”
Select the boot volume or partition from the left menu and click on the “Repair” tab
Repair Disk is now possible, click on “Repair Disk” to repair the boot volume
Now verify disk permissions and repair them
This solved the problem for me
Hope it helps......
Am I allowed to award myself a greenie? Well I'm going to anyway because it was a pile of work getting to the bottom of this and I hope it helps others.

Can't cut & paste from Firefox into MS Word 2010, but can using MS Internet Explorer

Updated Firefox to most recent version, then installed MS Office 2010 with MS Word 2010. Then attempted to copy and paste a selection from the internet using Firefox as the browser, but when MS Word 2010 was opened, all paste functions were greyed out and non-functioning. Eventually, I closed Firefox and opened MS Internet Explorer to browse the internet and attempted the same copy and paste on the same selection of text on the internet, but when MS Word 2010 was opened, all of the paste functions worked. Seems like MS is blocking the text copy and paste function in MS Word unless the internet browser is MS Internet Explorer. The previous version of MS Word was 2007 and it functioned the same for both Firefox and MS Internet Explorer when internet text selections were copied and pasted into a MS Word document. Operating system is Windows XP with all service packs.

I am having the same problem after upgrading to MS Office 2010. I used to be able to drag a snippet of text from any PDF file to Excel with no problem...now I am unable to do that. What happened?

I also cannot get into Store or Match but can access everything else

I've been on my computer for 7 frigging hours and cannot get this thing to work. I don't want to lose my library of music. I have Windows Vista and never had any problems before. Why can't Apple create a solution for their customers!!!! This is outrageous and ridiculous. I will not buy another apple product again.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START>PROGRAMS>ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START>PROGRAMS>ACCESSORIES>Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Can't send iMessages only text messages, can't log into iMessage in settings but can on here and names aren't showing in messages just numbers

This is a major problem which needs fixing, I've tried resetting my phone still nothing...

My phone has also stopped receiving long texts, (2 part messages). It has now started to receive only part 2. If you find a way to resolve this i would like to know too. Thanks shan

Why the html textarea tag doesn't work in Netscape 4.76 running SunOS5.5.1? I can get focus into it but can't type anything.

This is an iPlanet Application Server forum. Please ask this question in a newsgroup or forum for Netscape and/or broswer questions.
David

I loaded 3 email accounts into my new ipad2 but can only read the 1st one.

And...I can't find All Mail...how come?

I found out the reason on my own.The reason why I couldn't read the other two email accounts was because my ram memory was over loaded. To shut off unused apps. Double tap the home button. See the apps on the bottom of the screen. Hit the little red minus signs in the icons to remove these apps from ram. After removing all of them, the mail started working right. These ipads only have a half a gig of ram...which isn't much.

I can't get this script to produce output to the screen or a log file

I can't get this script to produce output to the screen or a log file of the select statement results as they are executed.
SET SERVEROUTPUT ON size 100000
DECLARE
v_schema     Varchar2(50);
v_statement      Varchar2(500);
v_name varchar2(30);
v_id varchar2(8);
v_pwd varchar2(16);
v_acct varchar2(16);
CURSOR get_schemas IS
SELECT DISTINCT owner
FROM all_tables
WHERE table_name = 'USERID'
ORDER BY owner;
BEGIN
OPEN get_schemas;
LOOP
FETCH get_schemas INTO v_schema;
EXIT WHEN get_schemas%NOTFOUND;
          v_statement := 'SELECT name,usid,passwd,acctnum INTO v_name,v_id,v_pwd,v_acct FROM '||v_schema||'.userid';
          execute immediate v_statement;
          DBMS_OUTPUT.PUT_LINE('Name='||v_name||' ID='||v_id||' PW='||v_pwd||' AC='||v_acct);
END LOOP;
CLOSE get_schemas;
END;
/

Duplicate post.
When I run this script nothing is output to the screen or spooled to a file

Raw access to serial port /dev/ttya

I need to control the characteristics of the serial port /dev/ttya on a Sun-Blade-100 running SOLARIS 8 from Java (JRE 6).
The purpose is to set the baud rate, parity bits, etc.
On my PC (development infrastructure, WinXP) I am using the javax.comm libraries and everything is fine. However, when copying the application to the SUN, no available ports are shown and the app terminates.
I suspect that I am missing some low-level stuff that accesses the devices ?!
Any ideas would be welcome!
Udo

(b) sounds like the best solution to me.
Google search result that seems reasonably close to what you need.
http://www.linuxquestions.org/questions … ce-644237/

I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

I cant get into itunes producer keep getting an error my username and password is incorrect. i have made a new one all good still same error any ideas?

I'm having a very similar problem.
I'm based in the U.K. and am trying to publish an iBook through the iTunes bookstore. I have made my book in iBooks author 2.0. My iTunes is up to date.
When I try and publish the iBook I have passed and ticked the Pre Publish Check; and the Create Account, but when I try and download iTunes Producer through iTunes Connect I'm told "Your Apple ID does not have permission to access iTunes Content."
When I try and re-set my iTunes Store account I'm told "The iTunes Store Account has already applied to distribute content on the iBookstore." Of course it has I just did that.
If I try and sign in to iTunes Connect through the Publishing pane I'm told "Your ID or Password was entered incorrectly." Even though I've just used it to sign into iTunes (and here), so my password and Apple ID work fine elsewhere.
Is my access to the iTunes Connect being delayed while my submission is processed, i.e. the processing of my tax and account details? Or am I stuck in a loop?
If this is still processing (I started this 20 hours ago) I assume that I have to submit the book itself when I can download iTunes Producer at a later date, as I haven't submitted the book yet?
I emailed the problem to iTunes Store and was refered to [email protected], only for them to say they don't read or reply to emails sent to that address??????
I'm not sure which part of the process I've reached - if any. I feel I'm in limbo. I have an iBook ready to go - but where is Apple?
Any help would be most welcome.
Andy

Acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)

I use the CS6 suite with Acrobat XI at windows platform.
When I want to save a file from InDesign as .pdf with output intention eci_iso_coated_v2_300 the result is a .pdf with more than 300% ink coverage.
I tried to transform the result in Acrobat XI into this standard output intention, but also the result has more than 300 % ink coverage.
What is the reason of this bug?
Before with Acrobat X this worked without problems

Hi Rob,
I was told the new way to work would be to draw files via Bridge direct into the InDesign file
and I thought automatically the color would not be changed.
my colourmanagement setting in bridge for the whole CS6 was ECI isocoated_V2_300
The Illustrator file was saved without color profile.
In this test file I used 3 kinds of black: background of pirate in cmyk 79,34 / 72,78 / 59,38 / 79,88 = ink coverage 291 %
DÜSSELPIRATEN in “black” (if you would convert this in the file with the cmyk button it would be the same ink-percentage as before
“e.V.” was set to 100 % k
I set the preferences for Acrobat from InDesign CS6 as pdf X4 with profile eci isocoatedV2_300 in three ways:
no color conversion
convert to profile
convert to profile keeping existing values
in all tree files the pirates background has 322 % ink coverage instead of 291 %
Why does Acrobat convert “black” in the wrong way? If I click in Illustrator on the 4c button to convert the “black” into 4c it is 291% ink
Acrobat should come to the same result with all profiles: iso coated V2 and iso coated V2_300
The same happens also by saving as .pdf X3 or .X1
The minimum what I expect is, that Acrobat reduces ink coverage for black to 300 %
I also made test with the new ECI profiles for laminated prints from 2012.
And with newspaper profiles
In this case the ink coverage comes below 300 %, but only when I choose convert to profile.
And then the 100 % k converts to cmyk, what I don’t want to have with text.
Is there no way to reduce ink coverage below a special percentage without changing Text 100% k
And is there a bug in Acrobat XI with the ECI IsoCoated_V2_300 Profile? For there is no color reduction below 300 % in all conversion settings.
I can’t test this with Acrobat X or IX, for my computers with this software don’t run with CS6 64 bit.
enclosed you find my files
Kind regards
Lutz Hanbueckers
Hanbueckers Werbung GmbH
Brandsackerstr. 5
40764 Langenfeld
P.O. Box 40 02 01
40242 Düsseldorf
Tel. +49 02173 1 09 44 - 0
Fax +49 02173 1 09 44 - 10
[email protected] <mailto:[email protected]>
www.hanbueckers.de
Visit our site
Steady attractive offers!!!
HR Düsseldorf B 26 480
owner Manager: Lutz Hanbueckers
Von: Rob Day [email protected]
Gesendet: Samstag, 2. März 2013 04:26
An: Hanbueckers Werbung
Betreff: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
Re: acrobat/Indesign does not export correct into the selected output intention (eci_iso_coated_v2_300)
created by Rob Day <http://forums.adobe.com/people/rob+day> in InDesign - View the full discussion <http://forums.adobe.com/message/5115613#5115613

Label report doesn't produce output

Hi all,
I have a problem with formular and label report.Exactly when i run label report in the browser using desformat(htmlcss or pdf), it does not produce any output.But in report builder it produces an output.I don't think that it's a problem of parameter because i use the same parameter in report builder and browser.
what's the matter, thanks!
TYAG

now try it
you should get
D:\Temp\telnet' is not recognized as an internal or external command,
operable program or batch file.
as an output
import java.io.*;
public class Main{
public static void main(String[] args)
    String[] command = new String[3];
    command[0] = "cmd.exe";
    command[1] = "/C";
    command[2] = "D:\\Temp\\telnet\telnet.exe";
    try
      Process p = Runtime.getRuntime().exec(command);
      BufferedReader stdin = new BufferedReader(new InputStreamReader
                                               (p.getInputStream()));
      BufferedReader stderr = new BufferedReader(new InputStreamReader
                                               (p.getErrorStream()));
      PrintStream stdout = new PrintStream(p.getOutputStream());
      String line = "";
      while((line = stderr.readLine()) != null)
        System.out.println(line);
      System.out.println();
      while((line = stdin.readLine()) != null)
        System.out.println(line);
      p.destroy();
    catch(Exception ex)
      System.out.println("Exception: " + ex.getMessage());
      System.exit(-1);
}

/dev/ttya connection problem

Good Afternoon,
I have a Solaris 10 x86 U6 system installed. It is setup with a Global zone and ACSLS software running in a non-Global zone. The problem that I having is after a reboot of the Global zone, it can take up to 15 min for /dev/ttya to become available for the ACSLS software(It is a serial connection to the LSM). In my zonecfg, I have added :
<fsoption name="nodevices"/>
</filesystem>
<device match="/dev/ttya"/>
Eventually, the serial port will become active and ACSLS communication will start. Is there anything that I can set to make this port start up faster?
Thanks in advance.

Darren,
Thanks for the response. I should have posted the error message but was in a hurry. Here's the message that we see on the screen after we attempted to login to the non-global zone after a global zone reboot:
2009-07-02 02:09:34 ACSLH[0]:
1140 N Lm_ttyVopen.C 1 142
Lh error: Lm_tty::Vopen: ACS 0: port /dev/ttya: open failed, errno = 6.
Like I said earlier, this can go on for at least 15 min. We have to keep logging out of the non-global zone and back in. Eventually the error will go away and we have communication. This only started when we replace a Ultra 10 running Sol 9 with this x86 system.
I don't have anything in the Global zone that I can test this problem with. The Global is just a normal install with a patch cluster installed:
SunOS z-dm-acsls 5.10 Generic_138889-08 i86pc i386 i86pc
I can open a case with support but I thought that I would try here first.
Thanks for any help.
Doug

Acrobat 5 - Placing PDF into inDesign and Output to Colour Separations are Wrong

Acrobat 5 - Placing PDF into inDesign and Output to Colour Separations are Wrong
I have a 2 Page PDF file from my client which I have to have setup 2UP on 450x320 for Metal Plates for the Press.
I setup my page size in inDesign and Placed each page from the PDF file into the inDesign Document.
Because I need 4 Metal plates (CMYK) I had to check the Colour Seperations for the file by outputting it to a Postscript file with CMYK SEPS and then using Adobe Distiller to turn it into a PDF file for me to view the Seperations.
As I've shown in the screen shot below. The CYAN plate has boxes all around the images in the PDF file which will come out on a Metal Plate.
Compared to the Colour version of the Client's PDF they supplied me, there is no boxes around the images.
I know this is a error with dropping a PDF file into inDesign, outputting to a PS file and then Distilling it to the SEPS. I've had the same problem when I've opened a PDF file that has been distilled in Illustrator and the Artwork is sliced into pieces and uneditable.
Has anyone else found this problem and if so is there a workaround?
I'm using Adobe inDesign CS and Adobe Acrobat Professional Version 5.

Im facing a similar kind of problem. I want to store and retrieve Office files, PDF and Jpegs into/from the database to view them on web in disconnected mode. Please reply as I cant find any help/documentation regarding saving BLOB data into files. I was able to store file data into BLOB, using DBMS_LOB package.
Shahzad

SFv120 - tip /dev/ttya into it produces output, but can't type

Similar Messages

Maybe you are looking for