So, it seems that when the second stacking cable was added it didn't change from chain mode to ring mode. I'm not sure if that was a side effect of the problem or the cause. Maybe there's something wrong with that stack cable or maybe not. I ended up moving it to a different set of switches and used a different cable on this set and both sets of switches are working fine now without the warning messages.

Similar Messages

Why does my iMac (on occasion) not shut down, warning message comes on saying i have to switch off by pressing and holding the power button then restart,

Why does my iMac (on occasion) not shut down, warning message comes on saying i have to switch off by pressing and holding the power button then restart, something to do with a Panic report?
Thanks
Brian

Hi mende1,
you asked me to post the Kernal panic report then next time it appears, sorry for the delay but it was fine until yesterday when it happened again so here it is, hope you can make sense of this, thank you for your help.
Regards
Brian
Interval Since Last Panic Report: 97797 sec
Panics Since Last Report:          1
Anonymous UUID:                    17D8F909-09A9-4BC6-A153-A12F75529506
Sun Jan 27 09:32:57 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff80002b4b31, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000800a9118, CR3: 0x0000000000100000, CR4: 0x0000000000000660
RAX: 0xffffff80008c2028, RBX: 0x00000000800a9100, RCX: 0xffffff800ae5bf00, RDX: 0x0000000000000080
RSP: 0xffffff8078713e68, RBP: 0xffffff8078713eb0, RSI: 0x000000005aefd876, RDI: 0x00000000800a9118
R8: 0x0000000000000010, R9: 0x0000000000000000, R10: 0xfffffe802662d000, R11: 0x00080000000263f3
R12: 0xffffff8078713f60, R13: 0xffffff8078713f78, R14: 0x0000000000000000, R15: 0x00000000800a9118
RFL: 0x0000000000010002, RIP: 0xffffff80002b4b31, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x00000000800a9118, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8078713b10 : 0xffffff8000220792
0xffffff8078713b90 : 0xffffff80002c4794
0xffffff8078713d40 : 0xffffff80002da55d
0xffffff8078713d60 : 0xffffff80002b4b31
0xffffff8078713eb0 : 0xffffff80002352a5
0xffffff8078713ec0 : 0xffffff800036489d
0xffffff8078713ee0 : 0xffffff8000345031
0xffffff8078713fb0 : 0xffffff8000820057
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 1750251829240
last loaded kext at 51464252613: com.apple.filesystems.msdosfs          1.7.1 (addr 0xffffff7f815c7000, size 57344)
last unloaded kext at 215848970782: com.apple.driver.AppleFileSystemDriver          13 (addr 0xffffff7f825c2000, size 12288)
loaded kexts:
com.vmware.kext.vmnet          3.0.0
com.vmware.kext.vmioplug          3.0.0
com.vmware.kext.vmci          3.0.0
com.vmware.kext.vmx86          3.0.0
com.apple.filesystems.msdosfs          1.7.1
com.apple.driver.AppleBluetoothMultitouch          70.12
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.GeForce          7.3.2
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleHDA          2.2.5a5
com.apple.driver.AppleMikeyDriver          2.2.5a5
com.apple.driver.AGPM          100.12.75
com.apple.driver.AppleBacklight          170.2.2
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.3
com.apple.driver.ApplePolicyControl          3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
com.apple.driver.AppleIRController          312
com.apple.driver.AppleUSBCardReader          3.0.6
com.apple.iokit.SCSITaskUserClient          3.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.iokit.IOAHCIBlockStorage          2.1.0
com.apple.driver.AppleAHCIPort          2.3.1
com.apple.nvenet          2.0.17
com.apple.driver.AppleUSBHub          5.1.0
com.apple.driver.AirPort.Atheros40          505.67.1
com.apple.driver.AppleUSBEHCI          5.1.0
com.apple.driver.AppleUSBOHCI          5.1.0
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleFWOHCI          4.9.0
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.4
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.driver.AppleBluetoothHIDKeyboard          160.7
com.apple.driver.AppleHIDKeyboard          160.7
com.apple.driver.AppleMultitouchDriver          231.4
com.apple.driver.IOBluetoothHIDDriver          4.0.8f17
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.nvidia.nv50hal          7.3.2
com.apple.NVDAResman          7.3.2
com.apple.driver.DspFuncLib          2.2.5a5
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleHDAController          2.2.5a5
com.apple.iokit.IOHDAFamily          2.2.5a5
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOAudioFamily          1.8.6fc18
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleGraphicsControl          3.1.33
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleSMC          3.1.3d10
com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
com.apple.driver.IOPlatformPluginFamily          5.1.1d6
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
com.apple.iokit.IOBluetoothFamily          4.0.8f17
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.1
com.apple.iokit.IOUSBMassStorageClass          3.0.3
com.apple.driver.AppleUSBMergeNub          5.1.0
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOUSBFamily          5.1.0
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOFireWireFamily          4.4.8
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.8
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.52f9
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST3500418ASQ, 500.11 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: Ext HDD 1021, 0x1058 (Western Digital Technologies, Inc.), 0x1021, 0x24300000 / 3
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 3
USB Device: hub_device, 0x0409 (NEC Corporation), 0x0059, 0x26400000 / 2
USB Device: Tablet, 0x172f, 0x0037, 0x26410000 / 6
USB Device: Mass Storage Device, 0x058f (Alcor Micro, Corp.), 0x6362, 0x26430000 / 5
USB Device: USB 2.0 Hub [MTT], 0x1a40 (TERMINUS TECHNOLOGY INC.), 0x0101, 0x26440000 / 4
USB Device: JumpDrive, 0x05dc (Lexar Media, Inc.), 0xa205, 0x26441000 / 7
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 4

Get rid of shut down warning/message?

When I go to shut down I get a message saying it'll shut down in one minute. Any way to get rid of this?
Thanks

Hold down the OPTION key while selecting shutdown.

Reader security warning message on pdf page linking

Hi All
I am building, for the 5th year running, an archive of a publications years magazines in pdf format. The pages are linked so that when for example an issue magazine cover is clicked in an index page I have created, it takes the viewer to the appropriate magazine pdf, all of which are stored as seperate files.
This has worked fine up until the introduction of Adobe Reader XI. Now a security warning message popup is generated every time a link to another page is clicked.
"This document is trying to access - page.pdf - if you trust this document then choose Allow if not choose Block"
We can't have this so:
Option One: Combine all the pdfs into one file, thus avoiding the problem but making a 400Meg file which may be a little unwealdy to edit
Option Two: Certify all the pages with a third party validated digital signature.
Question does any know if the Option Two will solve the problem?
I have aqured a test certificate from GlobalSign but it is maked as a test certificate and not to be trusted (not sure what the point of it is then!) and this does not work.
We don't want to pay $400 only to find that this does not solve the problem.
Anybody?
Thanks
Keith

In Adobe Acrobat 9 Pro I use the MArquee select Link Tool. It looks like a chain on the Advanced Editing toolbar.
Then the pages are linked using Open a file , or Go to a page view.
I am beging to think that this ia a bug. Because in edit / prefferenecs / security advanced / Add folder path. When you do this for a particular folder it makes no difference, you still get the Warning message.

Warning messages didn't show up

Hello,
I am trying to implement modification, that posting in transaction VL02N will display warning message when budget is exceeded. Solution is attached to Note 985734 and described in Note 447102:
"However, if you use transactions MIGO, MB1A, VL01, VL01N, VL02 or VL02N to carry out postings, the CO checks run.
However, the posting is only then interrupted if the system issues error messages. In this case, all warning and error messages, in particular those of the availability control, are logged.
If the system does not issue any error message during the posting, but issues an availability control warning message, which is linked with an e-mail to the person responsible (this conforms to action 2 in the definition of the tolerance limit of the availability control), the posting is not interrupted as described above and the system does not issue an availability control warning message. However, an e-mail is sent to the person responsible."
I slightly modified the modification to include transaction VL02N and my problem is that after statement MESSAGE is executed, the message don't come up and the program flow continues and I don't understand why. Here's a link to youtube with my debugger: http://www.youtube.com/watch?v=N7aB0pzjLgs
Could someone explain me why the warning message didn't show up, please?
Thanks,
Pavel Kraxner
P.S. In the end of the video is a comment in notepad that error messages are working OK, which is correct, but they are executed at different place (AC_DOCUMENT_CREATE returns sy-subrc = 1 in contrary to Warning messages) .. on that particular place any message didn't show up and I don't know why..

there is probably a place where there is a CALL FUNCTION ... EXCEPTIONS error_message = ...
If any message is sent inside the function module (or in one of its called procedures, at any level), then these messages are ignored. That's explained in [sap library|http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/dbaa0635c111d1829f0000e829fbfe/frameset.htm].
To check that, look at all the function modules which are displayed in the abap stack (in the debugger), and check how they are called.

Windows Fabric Warning messages and node failure

Hi ,
We have a service bus farm with 3 servers and sql installed in separate alwaysOn Instance.
we are seeing some warning messages in Event Viewer:
failed to send message Activate to node d917cb318cf36c4ce0867df57f2b57:130630848896673695 with error MessageHandlerDoesNotExistFault
GetActivationContextAsyncOperation called for invalid HostType NonActivated
Failed to update down node d917cb318cf36c4ce0867df57f2b57:130630848896673695: NoWriteQuorum
6db0d54b0361b018fa1f1e939ae98:130661086276070299 failed to process ChangeNotificationMessage full:100000004 d198518aa4afbdced0ae254d6e0866:130630848890604274 d917cb318cf36c4ce0867df57f2b57:130630848896673695.
Few more.
Same time, we have seen that our wcf services wriiten to read/Write into queues of services bus throwing exception for Service Bus connection and it appears for small time. It is random in nature.
Can someone help with reason for these warning and how to fix these.
Regards,
Kunal

Here is the error that I get from services side:
2015-01-19 03:39:53 - FATAL - OrderImportWorker - CurrentDomainOnUnhandledException - Unable to connect to Service Bus using HTTP connectivity mode.
Microsoft.ServiceBus.Messaging.MessagingCommunicationException: Unable to connect to Service Bus using HTTP connectivity mode. ---> System.ServiceModel.CommunicationException: Unable to connect to Service Bus using HTTP connectivity mode. ---> System.ServiceModel.CommunicationException:
Unable to connect to factory endpoint. -- Response:<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>Service Unavailable</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD>
<BODY><h2>Service Unavailable</h2>
<hr><p>HTTP Error 503. The service is unavailable.</p>
</BODY></HTML>
---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable.
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.ServiceBus.WebStream.CreateSession(Uri& endpointLocation1, Uri& endpointLocation2)
--- End of inner exception stack trace ---
at Microsoft.ServiceBus.WebStream.CreateSession(Uri& endpointLocation1, Uri& endpointLocation2)
at Microsoft.ServiceBus.WebStream.Connect()
at Microsoft.ServiceBus.WebStream.Open()
--- End of inner exception stack trace ---
Regards,
Kunal

Fibre Link Down

We have been using an Apple RAID with 8 disk (4 in each controller side) for almost 6 months, each controller in the raid is conected to a Qlogic 5600 and from there to 3 IBM servers using slicing and LUN mapping.
Suddenly since two weeks ago we have been receiving this logs AT IRREGULAR intervals:
Upper Controller 04/01/08 08:51:09 PM RAID Controller 1 Fibre Link Up
Warning Upper Controller 04/01/08 08:51:08 PM RAID Controller 1 Fibre LIP
Warning Upper Controller 04/01/08 08:48:48 PM RAID Controller 1 Fibre Link Down
And the windows server report that the SCSI disk have been disconnected, when we stop all the servers and reboot the raidfabricsservers works for 2 to 5 days and again the same messages.
Any idea of what is happenning and how to handle this ?
Humberto

+ the ports on the fibre switch should be configured right for storage/hosts:
RSCN suppression on / device scan off for hosts
and vice versa for storage
+ the logs from the FC are hidden, you can access them following the next procedure. (As explained in the [qlogic event manual|http://www.servants.co.jp/qlogic/pdf/2-259060-00_A-QLogicFCSwitchEventMassageGuideFW40.pdf]
Archiving and Downloading the Event Log
You can use the command line interface to create a file on the switch that contains
the most recent 200 entries plus the previous 1000 entries. This file can then be
downloaded to the workstation using FTP. To create and download a log file, do
the following:
1. Log into the switch through Telnet and create an archive of the event log.
The Set Log Archive command creates a file on the switch named logfile.
QLogic #> admin start
QLogic (admin) #> set log archive
2. Open an FTP session on the switch and login with the account name images
and password images. Transfer the file logfile in binary mode with the Get
command.
ftp ip_address
user:images
password: images
ftp>bin
ftp>get logfile
xxxxx bytes sent in xx secs.
ftp>quit

Launch File Warning Message

I created a simple hyerlink document in word - converted it to pdf - so far so good. I click on the links and a "Launch File" warning message appears similar to the one below. I click on the "do not show this message again" hoping that when I open the file again and click the link it won't appear again. Wrong! it keeps coming back. Anyway to suppress this message for good?
HC

Well, "don't exit Acrobat" works, but these documents are going to be run on computers accessed by many people and folks will sometimes exit Acrobat or shut down the computers. Execs don't take kindly to alerts popping up in the middle of their presentation. I have control of both the Acrobat documents and the playback computers. One thing I can do is set the preferences in Reader or even install Acrobat instead and set those preferences - but I haven't found anything to make the alert go away for good.

Ethernet/networking link down // AppleYukon2 - en0 link down

*Massive writing into a Volume located on a NAS // Ethernet/networking link down // AppleYukon2 - en0 link down*
Scenario
Writing a massive data into a volume (sparsebundle) on a NAS (network attached store).
*Problem / Error*
Always during this process the Ethernet link down.
Then the MAC OS X (10.5.6) freeze – no reset, no shutdown and no volume eject – after trying some clicks the spinning wheel comes and only soft reset or hard reset shutdown.
*Technical Info*
Wireless Device: Linksys - WRT54G firmware updated
NAS/External Hard Drive: Iomega - Home Network HD firmware updated
MacBook Pro // Mac OS X (10.5.6) // 2.2 GHz Intel Core 2 Duo // 2 GB
Logs
+LOG 1+
Apr 8 18:56:30 wslyMac /System/Library/CoreServices/backupd[207]: Backup requested by user
Apr 8 18:56:30 wslyMac /System/Library/CoreServices/backupd[207]: Starting standard backup
Apr 8 18:56:36 wslyMac /System/Library/CoreServices/backupd[207]: Mounted network destination using URL: smb://admin@STORAGE-7AB4/TimeMachine
Apr 8 18:56:36 wslyMac /System/Library/CoreServices/backupd[207]: Backup destination mounted at path: /Volumes/TimeMachine-1
Apr 8 18:56:58 wslyMac kernel[0]: AppleYukon2: 00000000,00000001 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 18:57:07 wslyMac hdiejectd[231]: running
Apr 8 18:57:08 wslyMac kernel[0]: jnl: disk1s2: replay_journal: from: 8088064 to: 15072256 (joffset 0x7d0000)
Apr 8 18:57:25 wslyMac kernel[0]: jnl: disk1s2: journal replay done.
Apr 8 18:57:25 wslyMac fseventsd[37]: event logs in /Volumes/TimeMachine_Backup/.fseventsd out of sync with volume. destroying old logs. (1989 18 2969)
Apr 8 18:57:25 wslyMac /System/Library/CoreServices/backupd[207]: Disk image /Volumes/TimeMachine-1/wslyMac_001b63b30d6b.sparsebundle mounted at: /Volumes/TimeMachine_Backup
Apr 8 18:57:25 wslyMac /System/Library/CoreServices/backupd[207]: Backing up to: /Volumes/TimeMachine_Backup/Backups.backupdb
Apr 8 18:57:29 wslyMac fseventsd[37]: log dir: /Volumes/TimeMachine_Backup/.fseventsd getting new uuid: CBE196F1-1008-4BFB-8D4A-AD9504E68ACF
Apr 8 18:57:59 wslyMac /System/Library/CoreServices/backupd[207]: Event store UUIDs don't match for volume: Macintosh HD
Apr 8 18:58:00 wslyMac /System/Library/CoreServices/backupd[207]: No pre-backup thinning needed: 29.79 GB requested (including padding), 245.17 GB available
Apr 8 19:20:31 wslyMac kernel[0]: AppleYukon2: 00000000,00000017 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:21:35 wslyMac kernel[0]: AppleYukon2: 00000000,0000001b sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:21:53 wslyMac kernel[0]: AppleYukon2: 00000000,0000001e sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:23:32 wslyMac kernel[0]: AppleYukon2: 00000000,00000004 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:23:37 wslyMac kernel[0]: AppleYukon2: 00000000,00000001 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:23:41 wslyMac kernel[0]: AppleYukon2: 00000000,00000011 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 19:25:32 wslyMac kernel[0]: smbiodsendall: Timed out waiting on the response for 0x32
Apr 8 19:25:38 wslyMac kernel[0]: AppleYukon2: 00000000,000003e8 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket timedout
Apr 8 19:32:07 localhost kernel[0]: npvhash=4095
+LOG 2+
Apr 8 22:03:19 wslyMac /System/Library/CoreServices/backupd[356]: Backup requested by user
Apr 8 22:03:19 wslyMac /System/Library/CoreServices/backupd[356]: Starting standard backup
Apr 8 22:03:19 wslyMac /System/Library/CoreServices/backupd[356]: Mounted network destination using URL: smb://admin@STORAGE-7AB4/TimeMachine
Apr 8 22:03:19 wslyMac /System/Library/CoreServices/backupd[356]: Backup destination mounted at path: /Volumes/TimeMachine-1
Apr 8 22:03:26 wslyMac /System/Library/CoreServices/backupd[356]: Disk image /Volumes/TimeMachine-1/wslyMac_001b63b30d6b.sparsebundle mounted at: /Volumes/TimeMachine_Backup
Apr 8 22:03:26 wslyMac /System/Library/CoreServices/backupd[356]: Backing up to: /Volumes/TimeMachine_Backup/Backups.backupdb
Apr 8 22:03:26 wslyMac /System/Library/CoreServices/backupd[356]: Ownership is disabled on the backup destination volume. Enabling.
Apr 8 22:03:26 wslyMac KernelEventAgent[35]: tid 00000000 received unknown event (256)
Apr 8 22:03:27 wslyMac /System/Library/CoreServices/backupd[356]: Event store UUIDs don't match for volume: Macintosh HD
Apr 8 22:08:22 wslyMac /System/Library/CoreServices/backupd[356]: Backup content size: 66.6 GB excluded items size: 44.6 GB for volume Macintosh HD
Apr 8 22:08:22 wslyMac /System/Library/CoreServices/backupd[356]: No pre-backup thinning needed: 26.46 GB requested (including padding), 249.57 GB available
Apr 8 22:08:22 wslyMac /System/Library/CoreServices/backupd[356]: Waiting for index to be ready (909 > 0)
Apr 8 22:40:50 wslyMac kernel[0]: AppleYukon2: 00000000,0000009c sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 22:40:50 wslyMac kernel[0]: AppleYukon2: 00000000,00000008 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 22:40:50 wslyMac kernel[0]: AppleYukon2: 00000000,00000004 sk98osx sky2 - - sk98osx_sky2::replaceOrCopyPacket tried N times
Apr 8 22:41:20 wslyMac kernel[0]: smbiodreconnect: Reconnected to STORAGE-7AB4
Apr 8 22:41:49: --- last message repeated 1 time ---
Apr 8 22:41:49 wslyMac kernel[0]: disk1s2: 0x48 (UNDEFINED).
Apr 8 22:41:50 wslyMac kernel[0]:
Apr 8 22:41:50: --- last message repeated 1 time ---
Apr 8 22:41:50 wslyMac kernel[0]: jnl: disk1s2: dojnlio: strategy err 0x5
Apr 8 22:41:50 wslyMac kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 463360 bytes to the journal!
Apr 8 22:41:50 wslyMac kernel[0]: smbiodreconnect: Reconnected to STORAGE-7AB4
Apr 8 22:41:50 wslyMac fseventsd[39]: disk logger: failed to open output file /Volumes/TimeMachine_Backup/.fseventsd/00000000005a57d8 (Invalid argument). mount point /Volumes/TimeMachine_Backup/.fseventsd
Apr 8 22:41:50 wslyMac kernel[0]: smbfssmb_reopenfile: Reopen 1a with open deny modes failed because the modify time has changed was 1239244850s 0ns now 1239244910s 0ns!
Apr 8 22:41:50 wslyMac kernel[0]: smbfssmb_reopenfile: Warning: pid 360(diskimages-helpe) reopening of 1a failed with error 5
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in ci_ftruncate:ftruncate(53 /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A- AE37-350EFD1764B1/live.0.indexPostings, 131072) error:22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in initPayload:ftruncate err: 22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexGeneral in notify_lowspace:low space for device 234881029 (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)
Apr 8 22:41:50 wslyMac mds[33]: (Error) Volume: LOW DISK SPACE device:234881029
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in ci_ftruncate:ftruncate(54 /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A- AE37-350EFD1764B1/live.0.indexPostings, 131072) error:22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in initPayload:ftruncate err: 22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in ci_ftruncate:ftruncate(48 /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98- 813F-46DA8DCFF8AF/live.0.indexPostings, 4096) error:22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in initPayload:ftruncate err: 22
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in copyFileOrFd:error (22) opening 0.indexGroups
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in recoverIndex:Unrecoverable error: could not recover groups file (0.)
Apr 8 22:41:50 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A- AE37-350EFD1764B1
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Error: (-50) SrcErr:NO Copying /Applications/Utilities/System Profiler.app/Contents/version.plist to /Volumes/TimeMachine_Backup/Backups.backupdb/wslyMac/2009-04-08-220327.inProgre ss/0788B97B-3F1C-4331-90E0-7FAE0EDDC3D1/Macintosh HD/Applications/Utilities/System Profiler.app/Contents
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Error: (-50) SrcErr:NO Copying /Applications/Utilities/System Profiler.app/Contents to /Volumes/TimeMachine_Backup/Backups.backupdb/wslyMac/2009-04-08-220327.inProgre ss/0788B97B-3F1C-4331-90E0-7FAE0EDDC3D1/Macintosh HD/Applications/Utilities/System Profiler.app
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Indexing a file failed. Returned -1132 for: /Applications/Utilities/System Profiler.app, /Volumes/TimeMachine_Backup/Backups.backupdb/wslyMac/2009-04-08-220327.inProgre ss/0788B97B-3F1C-4331-90E0-7FAE0EDDC3D1/Macintosh HD/Applications/Utilities/System Profiler.app
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Aborting backup because indexing of file failed.
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Stopping backup.
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Error: (-50) SrcErr:NO Copying /Applications/Utilities/System Profiler.app to /Volumes/TimeMachine_Backup/Backups.backupdb/wslyMac/2009-04-08-220327.inProgre ss/0788B97B-3F1C-4331-90E0-7FAE0EDDC3D1/Macintosh HD/Applications/Utilities
Apr 8 22:41:50 wslyMac /System/Library/CoreServices/backupd[356]: Copied 1738 files (4.0 GB) from volume Macintosh HD.
Apr 8 22:41:55 wslyMac /System/Library/CoreServices/backupd[356]: Backup canceled.
Apr 8 22:41:56 wslyMac /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[117]: StatusMonitor::volumesChangedCallBack returned -47
Apr 8 22:42:06: --- last message repeated 1 time ---
Apr 8 22:42:06 wslyMac /System/Library/CoreServices/backupd[356]: Failed to eject volume /Volumes/TimeMachine_Backup (FSVolumeRefNum: -113; status: -47; dissenting pid: 0)
Apr 8 22:42:06 wslyMac /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[117]: StatusMonitor::volumesChangedCallBack returned -47
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in ci_ftruncate:ftruncate(43 /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98- 813F-46DA8DCFF8AF/live.0.indexIds, 32768) error:22
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in openindexfile:ftruncate error: 22, size: 32768, live.0.indexIds
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in ContentIndexOpenBulk:Could not open /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98- 813F-46DA8DCFF8AF/live.0.; needs recovery
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in copyFileOrFd:error (22) opening 0.indexGroups
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in recoverIndex:Unrecoverable error: could not recover groups file (0.)
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98 -813F-46DA8DCFF8AF)(Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/B8028080-DC7D-4A98- 813F-46DA8DCFF8AF
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in copyFileOrFd:error (22) opening 0.indexGroups
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in recoverIndex:Unrecoverable error: could not recover groups file (0.)
Apr 8 22:42:56 wslyMac mds[33]: (/Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A -AE37-350EFD1764B1)(Error) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/TimeMachine_Backup/.Spotlight-V100/Store-V1/Stores/DE7D5030-E962-480A- AE37-350EFD1764B1
Apr 8 22:50:21 localhost kernel[0]: npvhash=4095
Apr 8 22:50:17 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
Apr 8 22:50:17 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
Apr 8 22:50:21 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Apr 8 22:50:21 localhost com.apple.launchd[1] (com.apple.blued): Unknown key for boolean: EnableTransactions
Apr 8 22:50:21 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Apr 8 22:50:21 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Apr 8 22:50:21 localhost DirectoryService[11]: Launched version 5.6 (v514.24)
Apr 8 22:50:27 localhost kernel[0]: hi mem tramps at 0xffe00000
Apr 8 22:50:22 localhost DirectoryService[11]: Improper shutdown detected
Apr 8 22:50:27 localhost kernel[0]: PAE enabled
Apr 8 22:50:27 localhost kernel[0]: 64 bit mode enabled
Apr 8 22:50:27 localhost kernel[0]: Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
Apr 8 22:50:27 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 8 22:50:27 localhost kernel[0]: vmpagebootstrap: 511374 free pages and 12914 wired pages
Apr 8 22:50:27 localhost kernel[0]: migtable_maxdispl = 79
Apr 8 22:50:22 localhost kextd[10]: 417 cached, 0 uncached personalities to catalog
Apr 8 22:50:27 localhost kernel[0]: 101 prelinked modules
Apr 8 22:50:27 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Apr 8 22:50:27 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Apr 8 22:50:27 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Apr 8 22:50:27 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Apr 8 22:50:27 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Apr 8 22:50:27 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Apr 8 22:50:27 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Apr 8 22:50:27 localhost kernel[0]: calling mpopolicyinit for mb
Apr 8 22:50:27 localhost kernel[0]: Seatbelt MACF policy initialized
Apr 8 22:50:27 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Apr 8 22:50:27 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 8 22:50:27 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 8 22:50:27 localhost kernel[0]: MAC Framework successfully initialized
Apr 8 22:50:27 localhost kernel[0]: using 10485 buffer headers and 4096 cluster IO buffer headers
Apr 8 22:50:27 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Apr 8 22:50:27 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Apr 8 22:50:27 localhost kernel[0]: mbinit: done
Apr 8 22:50:27 localhost kernel[0]: Security auditing service present
Apr 8 22:50:27 localhost kernel[0]: BSM auditing present
Apr 8 22:50:27 localhost kernel[0]: rooting via boot-uuid from /chosen: 402D8D77-0836-3192-8A63-554D726141DC
Apr 8 22:50:27 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 8 22:50:27 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 001e52fffe3817fa; max speed s800.
Apr 8 22:50:27 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleICH8AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/FUJITSU MHY2120BH Media/IOGUIDPartitionScheme/Customer@2
Apr 8 22:50:27 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Apr 8 22:50:27 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 15129600 to: 2979328 (joffset 0x7d01000)
Apr 8 22:50:27 localhost kernel[0]: [Bluetooth::CSRHIDTransition] switchToHCIMode (legacy)
Apr 8 22:50:27 localhost kernel[0]: [Bluetooth::CSRHIDTransition] transition complete.
Apr 8 22:50:27 localhost kernel[0]: [HCIController][configurePM] power parent ready after 1 tries
Apr 8 22:50:27 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Apr 8 22:50:27 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Apr 8 22:50:27 localhost kernel[0]: HFS: Removed 4 orphaned unlinked files or directories
Apr 8 22:50:27 localhost kernel[0]: Jettisoning kernel linker.
Apr 8 22:50:27 localhost kernel[0]: Resetting IOCatalogue.
Apr 8 22:50:27 localhost kernel[0]: GFX0: family specific matching fails
Apr 8 22:50:27 localhost kernel[0]: Matching service count = 1
Apr 8 22:50:27 localhost kernel[0]: Matching service count = 2
Apr 8 22:50:27: --- last message repeated 4 times ---
Apr 8 22:50:27 localhost kernel[0]: Previous Shutdown Cause: 5
Apr 8 22:50:27 localhost kernel[0]: NVDANV50HAL loaded and registered.
Apr 8 22:50:27 localhost kernel[0]: GFX0: family specific matching fails
Apr 8 22:50:27 localhost kernel[0]: ath_attach: devid 0x24
Apr 8 22:50:27 localhost kernel[0]: Override HT40 CTL Powers. EEPROM Version is 14.4, Device Type 5
Apr 8 22:50:27 localhost kernel[0]: mac 12.10 phy 8.1 radio 12.0
Apr 8 22:50:27 localhost kernel[0]: GFX0: family specific matching fails
Apr 8 22:50:27: --- last message repeated 1 time ---
Apr 8 22:50:27 localhost kernel[0]: Matching service count = 0
Apr 8 22:50:27 localhost kernel[0]: yukon: Ethernet address 00:1b:63:b3:0d:6b
Apr 8 22:50:27 localhost kernel[0]: AirPort_Athr5424ab: Ethernet address 00:1e:52:71:2c:52
Apr 8 22:50:30 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[16]: starting
Apr 8 22:50:30 localhost fseventsd[38]: event logs in /.fseventsd out of sync with volume. destroying old logs. (3603 22 3778)
Apr 8 22:50:30 localhost rpc.statd[30]: statd.notify - no notifications needed
Apr 8 22:50:31 localhost kernel[0]: AirPort: Link Down on en1
Apr 8 22:50:30 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[33]: Login Window Application Started -- Threaded auth
Apr 8 22:50:30 localhost fseventsd[38]: log dir: /.fseventsd getting new uuid: B621E1D8-11D5-49D5-90F5-6E32BEDC8615
Apr 8 22:50:30 localhost bootlog[45]: BOOT_TIME: 1239241808 0
Apr 8 22:50:30 localhost blued[46]: Apple Bluetooth daemon started.
Apr 8 22:50:31 wslyMac configd[14]: setting hostname to "wslyMac.local"
Apr 8 22:50:33 wslyMac kernel[0]: AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0
Apr 8 22:50:35 wslyMac org.ntp.ntpd[26]: Error : nodename nor servname provided, or not known
Apr 8 22:50:35 wslyMac ntpdate[60]: can't find host time.apple.com
Apr 8 22:50:35 wslyMac ntpdate[60]: no servers can be used, exiting
Apr 8 22:50:39 wslyMac kernel[0]: IOHIDSystem: Seize of IOHIDPointing failed.
Apr 8 22:50:39 wslyMac kernel[0]: IOHIDSystem: Seize of IOHIDEventDriver failed.
Apr 8 22:50:39 wslyMac kextd[10]: writing kernel link data to /var/run/mach.sym
Apr 8 22:50:43 wslyMac /usr/sbin/ocspd[75]: starting
Apr 8 22:50:43 wslyMac com.apple.SystemStarter[28]: Starting HP IO Monitor
Apr 8 22:50:43 wslyMac com.apple.SystemStarter[28]: Starting HP Trap Monitor
Apr 8 22:50:43 wslyMac com.apple.SystemStarter[28]: /Library/StartupItems/HP Trap Monitor/HP Trap Monitor: line 15: /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor: No such file or directory
Apr 8 22:50:46 wslyMac loginwindow[33]: Login Window Started Security Agent
Apr 8 22:52:36 wslyMac authorizationhost[95]: MechanismInvoke 0x125de0 retainCount 2
Apr 8 22:52:36 wslyMac SecurityAgent[96]: MechanismInvoke 0x101660 retainCount 1
Apr 8 22:52:37 wslyMac SecurityAgent[96]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Apr 8 22:52:37 wslyMac loginwindow[33]: Login Window - Returned from Security Agent
Apr 8 22:52:37 wslyMac SecurityAgent[96]: MechanismDestroy 0x101660 retainCount 1
Apr 8 22:52:37 wslyMac authorizationhost[95]: MechanismDestroy 0x125de0 retainCount 2
Apr 8 22:52:37 wslyMac loginwindow[33]: USER_PROCESS: 33 console
Apr 8 22:52:37 wslyMac com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[91]): Exited: Terminated
Apr 8 22:52:37 wslyMac com.apple.launchd[108] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
Apr 8 22:52:42 wslyMac Dock[118]: _DESCRegisterDockExtraClient failed 268435459
Apr 8 22:52:44 wslyMac /System/Library/CoreServices/coreservicesd[56]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(wsly Hiroyuki Mompean Ueda's Public Folder) returned -14135
Apr 8 22:53:02 wslyMac /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 24]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Apr 8 22:53:02 wslyMac /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 24]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Apr 8 22:54:42 wslyMac kernel[0]: AppleYukon2 - en0 link down
Apr 8 22:54:46 wslyMac kernel[0]: AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0
Apr 8 22:54:52 wslyMac kernel[0]: AppleYukon2 - en0 link down
Apr 8 22:54:53 wslyMac kernel[0]: AppleYukon2 - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled port 0

I've had this problem with this computer as soon as I remember starting to use it.
You should have taken it back to apple immediately.
You need to try a clean install of the OS.. yosemite has known bugs especially with the wireless and if you upgrade installed the OS it can just get worse.
You should do a clone of the hard disk and a Time Machine backup etc.. to make sure you don't lose files.. but a clean install will at least show if it is driver issue or actual faulty hardware. Is the laptop still in warranty / Applecare.. if so return it to apple for checking.

I am getting a warning message when i am trying to create a host-named sitecollection.

Hi guys,
I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
When i tried to create a customer root site. I am getting a warning message
" WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
Application. The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
this port."
I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
Can anyone help me to solve. And i wanna know why this error message comes!!!
Thanks in advance
Rajendran.

First, you shouldn't create a host named site collection on a Web app that has host header named. Doing that implements host names at two different levels and will not work reliably. Second I'm not sure what you mean when you say you didn't
use the FQDN but used just the domain name. A Full url will always be either an FQDN or a shorter Netbios name. If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url There is no way
to use just the domain name. For example, Contoso.com is the domain name. Server.contoso.com or WEbsite.contoso.com are FQDNs. YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain. What is the URL for your root site and your host named site?
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Warning message in BW Report through Portal

Friends,
I really need your help to remove the waring message.
For the purpose of changing the description on the Selection screen from Cost Cetnters (Authorised Values) to Funds Centers I had changed the ZCCTRATI variable description to Funds Centers
Issue:
When we open the old report we see the following information message.
" Value if variable ZCCTRAT1 is automatically converted
I did go to TC RSRT as of Dinesh,Vijay advice ,Just want to know that what message i need to Click .because i could nt find the relevant message
Can u help me how to remove this ?

Hi Manohar,
Edit to add: Here I assume you have a Web Application Designer (WAD) report.
You can suppress system and warning messages in WAD. Try this and see if it helps.
- Go to your WAD report
- In the top part of the properties window there is a drop down box. Open this box and select the top level entry there. This should be the name of your report.
- Click Web Item
- Check the following two checkboxes: "Do not Display System Messages" and "Do not Display Warnings".
Hope this helps,
Regards,
Petter
Message was edited by: M Petter

Hi, I am getting a warning message on screen, saying that my iPad hasn't been backed up for 2 weeks, and saying under what circumstances the message appears. My problem is, is that I have backed up iCloud, but am unable to remove the warning.

Hi,
I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
Has any other user had such a problem, and if so, how did they rectify it.
Any advice would be greatly appreciated.
Thanks in advance.
clarinet99

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

Warning message in Adobe form

Hi ,
My form is accessed through portal.
I want a warning message to be displayed when there is no data in the dropdown.
The message can be given
1. At the start when the form opens up Or
2. When the user clicks on the dropdown.
Please help me with this.
Points will be rewarded for useful answers.
Thanks.

Thomas,
In the initialize event of your drop-down put following code.Change language to javascript.
        var DataBinding = this.bind.ref;
     // the data binding may contain "$data.<root data name>" instead of $record
     DataBinding = DataBinding.replace("$data."+xfa.record.name,"$record");
     DataBinding = DataBinding.replace("$record.", "");
     var itemNode = xfa.form.resolveNode("xfa.datasets.data."+xfa.record.name+".sap-vhlist."+DataBinding.replace(/(\.)/g,"\\.").replace(/(\[\*\])/g,""));
     var size = 0;
     try
         size = itemNode.nodes.length;
         xfa.host.messageBox("Size is :"+size);
         if(size == 0)
              xfa.host.messageBox("Month is empty");
     catch(e)
          xfa.host.messageBox("Error");

Warning message in portal after upgrade

There are warning messages coming in web reports after upgrade to 7.31. In trace we could find the message " The unique is bbeleno is not valid" . Anyone has any input? pls help

Does this warning happen to all web reports?
This doesn't look like a reporting error message. Are you sure "bbeleno" is not a user that has been defined for some background connection between the ABAP and JAVA stacks? Check in SU01D to see if that bbeleno might be incorrectly set as a system user, or if it is used in the RFC connections between ABAP and JAVA.
You say you get the warning in RSRT but was it executed on the ABAP stack ? You can try using RSRT2 and click on ABAP for that.

Supress warning message in Query Analyzer after free characteristic removed

Hi
I have a query and several workbooks looking to the same query.
When I remove a free characteristic from the query (not the cube) I am presented with a warning message when opening Analyzer indicating that the removed field is no longer available on the report.
Is there any way to supress these warning messages? I am aware of the option Settings > Supress warnings from server but I would not want to ask every people to do this in the company. Is there a way I can supress the warning from the query?
We are running 3.x for this particular query and report.
Thanks

Hi,
In RSRT, you have an option for the suppressing the messages.
Have a look on the below link -
http://wiki.sdn.sap.com/wiki/display/BI/SuppressquerymessagesusingRSRT
Regards,
Geeta

SG500X-48 Stack Link Down Warning Messages

Similar Messages

Maybe you are looking for