Share local CVS Folder between SQLDeveloper and TortoiseCVS?

Hi all,
i tried to play around with SQL Developers CVS Support, but can't get it right.
I would like to checkout a module from CVS using TortoiseCVS (e.g. to C:\Project\ragtest\), because there are many files not related to Database in there.
To edit, compile and commit my Database Packages i would like to use SQL Developer, but would like SQL Developer to share my local Folder (C:\Project\ragtest) with TortoiseCVS.
Is that possible?
Peter

I can make it work as follows.
In TortoiseCVS, define CVSROOT as necessary (eg :pserver:myuser@mycvsserver:/cvs
In SQLDeveloper, create a new CVS connection with exactly the same CVSROOT.
You should be able to see alll the modules in the Versioning Navigator and in TortoiseCVS.
Checkout a module in TortoiseCVS
Open the File Navigator in SQLDeveloper, and go to the directory you checked out to. The files should appear there with appropriate CVS overlay icons and version.
Modify a file in SQLDeveloper.
The status of the file should change in both SQLDeveloper and TortoiseCVS.
Modify a file outside SQLDeveloper
You have to use view refresh to see the status change in SQLDeveloper.

Similar Messages

Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?

Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?

Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly Thanks anyway!

What is the best way to share a specific folder between macs????

Hello, I would like to share a specific folder between macs, heres what I need to do:
1) share one folder that resides in my home folder
2) the other mac should be able to view it without any login information (no password etc)
How? What is the best way?

aapl.up wrote:
Rick, are you saying that if you try to share a folder outside of home and use sharepoints, then the other mac wont prompt you to log in? Have you tried that? It is hard to believe that is the case
I am sort of saying that. Have you tried it? I know it's hard to believe, but you really need to help us out by trying some steps that you don't believe.
We can't see what your exact situation is. We sort of know what's worked for us out here. Just trying to help you get this going in less than 24 hours!
Sharepoints manages the samba configuration file. It's free software that puts a pretty face on an otherwise cumbersome config file.
Give it a shot.
windows will not prompt for passwords, I have tried this with multiple computer at home for both vista and xp
As I stated. You will not get prompted on windows, if you have set up sharing in an insecure fashion. You are not using a secured sharing situation.
No argument with your statement.

How to create shared folder between mac and windows

how to create shared folder between mac and windows

Us ean external drive formatted FAT32 or ExFat. Both OSx and Windows can read/write to the drive and both can use the same data files as long as you have a program that can open and save these files. For example, Word running both on OSx and on Windows will be able to work with the same document on the external drive.

Sharing a folder between LR and PS Elements

Hi there-
Im pretty new to LR, and have been experimenting moving photos back between LR and PS Elements 7. I cant seem though to find a way to get them to 'share' a single folder, rather it seems I need to have the same RAW file in 2 places.
First I import my RAW files into LR, call it C:\Lightroom.
I work on the pictures in LR, and while changes are made, there is no boxcar file added to c:\Lightroom. I have no idea how LR tracks or stores the changes.
If I ask PSE 7 to import the files from c:\Lightroom, it will not recognize that any changes have been made, as there is no boxcar.
If I ask LR to export the photos to c:\Lightroom, it refuses to overwrite the source file, and doesnt include the boxcar.
I can ask LR to export to a different folder, call it c:\My Pictures. PSE7 can read those files with Boxcars fine. But any changes I make in PSE7 (for example I delete the file) will have no impact on LR, as those files are all in c:\Lightroom. And it does mean that each picture takes up twice as much space, one RAW file in c:\Lightroom and one in c:\My Pictures.
Is there any way both programs can effectively use the saw RAW file in the same folder, with a minimum of hassle?

That got me on the road, but now there seems to be another problem. In LR I now have a '?' in the upper right of the pciture which indicates 'sidecar file missing', and when I click on it its looking for the jpg, yet I dont think I ever created one, and I didnt see any in the folder before this.
All I had done after toggling the XMP on is open up the pictures in Elements (where they opened up fine) and deleted one of them. Not sure why LR is on about a JPG.

Can I share the home folder between 2 MacBook Pros?

I have a mid 2009 15 in. MacBook Pro running OS X 10.9.4.
I recently sucessfully moved my home folder to an external disk in order to increase the space on my hard drive.
I am planning to acquire a 13 in. MacBook Pro with Retina display. I would like to have both computers use the same home folder. This would allow me to share all data files with both computers without having to move the data files about, although I could use only one or the other of the computers at a time.
Does anyone know if this is possible? If not, why not?

Your apps should not be installed in your home folder--they should be in /Applications where every user can access them.
If you want to share things between users on the same Mac, use the /Users/Shared folder. Keep your home folder private. Trying to defeat the protections on the home folder subfolders just gets messy. I've never bothered to figure out all of the problems associated with it so I can't explain how to do it.
Even with using Shared, you would need to alter the ACLs on the shared folder in order to allow both users to modify the documents.
You must create a Group in Users & Groups and put each user in that group. Then create a folder inside /Users/Shared where you want to share the various files.
Then, add an ACL to the shared folder that gives the group special permissions. on that folder.
sudo chmod -R +a "<sharinggroup> allow delete,chown,list,search,add_file,add_subdirectory,delete_child,file_inherit,directory_inherit" /Users/Shared/<sharing folder>
Replace <sharinggroup> and <sharingfolder> with the name of your group and your folder. Then, run the command in the Terminal.
With that ACL, each user in <sharinggroup> will be able to alter the files created by any user in the group in that <sharingfolder>.
Essentially, the client OS is not designed for true file sharing among the individual users. It is designed to isolate each user account from the others.

Share Configuration Manager Entries between WebDynpro and EJB

Hi there,
I have an annoying problem: I would like to have a WebDynpro as full-blown configuration interface for my EJBs. As steted in the docu, it is not possible to share configurations between applications.
With EJB and Web Modules I would just place them in the same Enterprise Application. But I cannot as WebDynpro projects to enterprise applications (as far as I know).
Does anyone have a clou about I could manage this issue?
Thanks!
helge

Hi Maksim,
at the link you've provided it is described how to use the Configuration Manager within an EJB Module.
My Problem is that I want to use it from an WebDynpro Application. But there I don't have a META-INF\application-j2ee-engine.xm to configure the dependency.
This itself is not a problem since you can also access the Configuration Manager via JNDI.
My problem now is that the EJB Module (more precise the enterprise application where the EJB Module is included) needs to share the configurtion with the Dynpro. But vi JNDI you only get the ApplicationConfigurationManager - which is application specific.
So the question is how I could share the configuration between WebDynpro and EjbModule...
Regards,
helge

Share one iMovie folder between two user accounts

Hello, I just consolidated two mac computers into one mac mini. Now both my wife and I want to share the same actual computer (new mac mini) and share media folders so we are not duplicating photo imports and movies. I figured out how to map the iTunes library and the iPhoto library to a shared folder, but cannot get how to map the 'movie' folder to a single folder for both accounts. This would be needed so we can share and work on the same iMovie projects between the two accounts. Does anyone have any suggestions?

On my Mac Pro I moved the entire library to "Macintosh HD/Shared/iTunes". Changed the Folder location in iTunes Preferences->Advanced->General to point to that location. Then in each user change the Music/iTunes folder to be an alias or link pointing to the Shared/iTunes folder. You will likely need to change the permissions on that folder to give everyone the ability to read and write. Do that via "Get Info" on the iTunes folder using Finder. I'd suggest backing everything up before you do this.

Sharing my mp3 folder between Mac and PC partitions

Hello,
I'm a Mac newbie considering Bootcamp on a new MacBook Pro. I'm wondering what's the best way to share a folder of mp3's (about 10 GB) between my Mac and Windows partitions. I read that Fat32 partitions can be shared but they are very wasteful of disk space. What's the alternative and is it reliable? Thanks in advance!

I use MacDrive to enable Windows to see the Mac partition. Then you can tell iTunes not to copy the songs when added. I think you can even copy the iTunes Music Library.xml from the mac side

How can I do to share the array elements between "C" and "Java"

Hi,all
I want to implement the function about this: c and java between JNI can share the same data area. For example, when change the value of the array in java, i can get the same value in c.
I use the function:Xxx* GetXxxArrayElements(JNIEnv env, jarray array, jboolean isCopy)
But i find that the "isCopy" is JNI_TRUE which means that i get the pointer which point to a copy,so i can't get the change
in Java later.
How can I do?Can i set "isCopy" with JNI_FALSE??
Thank u.

No, you can't. isCopy is of type jboolean*, and the value is just set by the call to inform you whether the data was copied or not, but you cannot infulence that.
In fact, the VM might store an array of primitives in a different way as C, and this routine has to convert between the two representations. In this case copying is always required.

Can one share album cover art between WMP and iTunes?

I am regularly using Windows Media Player as well as iTunes (the latter mainly to fill my iPod). All my albums (well-organized in subdirectories) contain a file "folder.jpg" (which is the standard unser windows) containing the album's cover art.
iTunes apparently goes off and tries to download the cover art from some server and then stores it in its own setup under .../My Music/iTunes/Album Artwork/..., but obviously isn't very good at that, since it finds only maybe 20% of the covers, the rest remains empty. Is there a way to tell iTunes to pick up the cover art from those folder.jpg files?
Ideal would of course be, if the two could share these files (i.e. pointing to the same file (e.g. using NTFS hard-links). Is that possible? Does anyone know a tool or script that does that automagically?
Michael

{quote}Is there a way to tell iTunes to pick up the cover art from those folder.jpg files?{quote}
No. You can work around this by using another program like Mp3tag to embed the artwork from folder.jpg into the ID3 tag. Despite its "mp3" name, Mp3tag will also work on AAC files.
You cannot use hard links because the iTunes artwork files are not simply picture files. The pictures are embedded in some other (undocumented of course) ITC format (I say ITC format because that is the file extension -- I have no idea what it means). Also, you would have to figure out the folder structure.
Another option is to use an external program to "trick" itunes into downloading the artwork from your own server. See these threads/posts:
http://discussions.apple.com/thread.jspa?messageID=6118642&#6118642
http://discussions.apple.com/thread.jspa?messageID=5549932&#5549932

Share Files with Bonjour between XP and Leopard?

Can you share files between Mac OS Leopard and XP using Bonjour?
If so, how?
I have a Linksys router plugged into XP and a built in Airport card on the Mac. I can use the internet but I am having trouble sharing files.
Any help would be appreciated!

s/pdif seems to be for such situations. You could also try running some networked sound daemon, pulseaudio supposedly runs on windows as well, not sure what support phonon has for networked audio.

Share files & external HD between iMac and Macbook (wirelessly)?

I just bought a new iMac Bad-A computer to add to my rapidly growing arsenal of apple products. I'm having a little trouble figuring out how to share an external HD.
Here's how I have it set up:
iMac in office is connected directly to external HD via firewire.
Airport Extreme is my wireless router in the living room
Macbook is obviously mobile and makes its way to different rooms in the house
Here's what I'd like to accomplish:
Direct file sharing between the iMac to Macbook. I'd like to be able to access files from any location on either computer from the other one. I'd also like the external HD to show up on both the iMac and the Macbook.
Both computers are running the latest version of OS X
Thanks!

Then turn on file sharing in System Preferences on the iMac and the MB will be able to access the drive.
I have a HD connected to an Airport Extreme (APEx) and I have file sharing on my MB (administrator's MacBook) This is what I see in the Finder on my iMac

Link Local BGP peering between Cisco and Juniper (M-Series)

Hi,
has anybody successfully managed to get a working IPv6 session between a Cisco and a Juniper router using Link Local IPs?
I got it working between two cisco routers and two Juniper Routers but not with the two different vendors.
Configuration on the Juniper site:
   family inet6 {
       address FE80::1/64;
protocols {
      bgp {
          group customer_ipv6 {
              neighbor fe80::2 {
                  local-interface at-2/0/0.119;
                  peer-as 65300;
                  as-override;
Configuration on the Cisco site:
interface ATM0/0/0.1 point-to-point
bandwidth 2033
ip address 10.194.235.42 255.255.255.252
ip access-group AL-SECURITY-WAN out
ip mtu 1500
ipv6 address FE80::2 link-local
ipv6 enable
bfd interval 999 min_rx 999 multiplier 15
pvc 1/32
vbr-nrt 2244 2244 1
tx-ring-limit 3
encapsulation aal5snap
router bgp 65300
bgp router-id 10.213.58.185
bgp log-neighbor-changes
no bgp default ipv4-unicast
neighbor FE80::1%ATM0/0/0.1 remote-as 65300
neighbor FE80::1%ATM0/0/0.1 version 4
neighbor FE80::2%GigabitEthernet0/1 remote-as 65300
neighbor FE80::2%GigabitEthernet0/1 version 4
address-family ipv4
exit-address-family
address-family ipv6
neighbor FE80::1%ATM0/0/0.1 activate
neighbor FE80::1%ATM0/0/0.1 advertisement-interval 5
neighbor FE80::1%ATM0/0/0.1 soft-reconfiguration inbound
neighbor FE80::1%ATM0/0/0.1 route-map NH6 out
neighbor FE80::2%GigabitEthernet0/1 activate
neighbor FE80::2%GigabitEthernet0/1 advertisement-interval 5
neighbor FE80::2%GigabitEthernet0/1 soft-reconfiguration inbound
neighbor FE80::2%GigabitEthernet0/1 route-map NH6 out
exit-address-family
CE_HOSTNAME# show ip bgp ipv6 uni su
BGP router identifier 10.213.58.185, local AS number 65300
BGP table version is 7, main routing table version 7
4 network entries using 656 bytes of memory
4 path entries using 320 bytes of memory
1/1 BGP path/bestpath attribute entries using 128 bytes of memory
2 BGP AS-PATH entries using 48 bytes of memory
2 BGP community entries using 48 bytes of memory
0 BGP route-map cache entries using 0 bytes of memory
0 BGP filter-list cache entries using 0 bytes of memory
BGP using 1200 total bytes of memory
BGP activity 34/12 prefixes, 38/12 paths, scan interval 60 secs
Neighbor        V           AS MsgRcvd MsgSent   TblVer InQ OutQ Up/Down State/PfxRcd
FE80::1%ATM0/0/0.1
                4        65300       0       0        1    0    0 never    Idle
FE80::2%GigabitEthernet0/1
                4        65300      15      16        7    0    0 00:10:59        4
CE_HOSTNAME#
The console monitoring states the following:
Nov 10 06:30:33.023 MET: %BGP-3-NOTIFICATION: sent to neighbor FE80::1%ATM0/0/0.1 active 2/7 (unsupported/disjoint capability) 0 bytes
Nov 10 06:30:33.023 MET: %BGP-4-MSGDUMP: unsupported or mal-formatted message received from FE80::1%ATM0/0/0.1:
FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 001D 0104 505A 005A 52D2 C023 00
Nov 10 06:30:33.023 MET: %BGP-3-NOTIFICATION: received from neighbor FE80::1%ATM0/0/0.1 active 2/5 (authentication failure) 0 bytes
de-ipc-ulmdon-ce-02#
Nov 10 06:30:33.023 MET: %BGP_SESSION-5-ADJCHANGE: neighbor FE80::1%ATM0/0/0.1 IPv6 Unicast topology base removed from session BGP Notification sent
The Cisco Router is running IOS 15.2, the Juniper Site JunOS 10.4
Any Ideas how I can get this to work?
Thanks in advance!

Marcin,
I updated the debugging log, the previous one was created using override-capability-neg on the neighbor (experimental).
>>0) Do you see similar scenario for working session? (Between two Cisco routers)
The working connection between two cisco routers doesn't show any output
>>1) What verion of IOS are you running? Something failrly recent I hope?
Show Version:
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(1)T1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Mon 19-Sep-11 16:24 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
CE_HOSTNAME uptime is 2 weeks, 5 days, 21 hours, 35 minutes
System returned to ROM by reload at 18:43:21 MET(S) Fri Oct 21 2011
System restarted at 18:44:50 MET(S) Fri Oct 21 2011
System image file is "flash:c1900-universalk9-mz.SPA.152-1.T1.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco CISCO1941/K9 (revision 1.0) with 446464K/77824K bytes of memory.
Processor board ID FCZ1504C0G8
1 DSL controller
2 Gigabit Ethernet interfaces
1 ATM interface
1 terminal line
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device#   PID                   SN
*0        CISCO1941/K9          FCZ1504C0G8
Technology Package License Information for Module:'c1900'
Technology    Technology-package           Technology-package
              Current       Type           Next reboot
ipbase        ipbasek9      Permanent      ipbasek9
security      None          None           None
data          datak9        Permanent      datak9
Configuration register is 0x2102
>>2) Can we have some more info from Juniper side (logs/debugs).
Sadly not. The Juniper Traceoptions don't show anything
All I can offer you at this point is the neighbor show command:
user@Juniper> show bgp neighbor fe80::2 instance vrf-test
Peer: fe80::2 AS 65300         Local: unspecified AS 20570
Type: External    State: Idle           Flags:
Last State: NoState       Last Event: NoEvent
Last Error: None
Export: [ pol-standard-bgp-export ] Import: [ pol-standard-bgp-import ]
Options:
Options:
Address families configured: inet6-unicast
Path-attributes dropped: 128
Holdtime: 90 Preference: 170
Number of flaps: 0
Trace options: all
Trace file: /var/log/bgp_ipv6_ll_20111110 size 131072 files 10
user@Juniper> show bgp summary instance vrf-test
Groups: 2 Peers: 2 Down peers: 1
Table          Tot Paths Act Paths Suppressed    History Damp State    Pending
vrf-2.inet.0          37         16          0          0          0          0
vrf-.inet6.0           0          0          0          0          0          0
vrf-24.mdt.0           0          0          0          0          0          0
Peer                     AS      InPkt     OutPkt    OutQ   Flaps Last Up/Dwn State|#Active/Received/Accepted/Damped...
10.194.235.42         65300       1149       1076       0       1     8:44:00 Establ
vrf-test.inet.0: 6/7/7/0
fe80::2               65300          0          0       0       0     9:38:32 Idle
>>3)
CE_HOSTNAME#
Nov 10 15:35:49.574 MET: BGP: ses global 10.194.235.41 (0x2970EDA4:1) Keep alive timer fired.
Nov 10 15:35:49.574 MET: BGP: 10.194.235.41 KEEPALIVE requested (bgp_keepalive_timer_expired)
Nov 10 15:35:49.574 MET: BGP: ses global 10.194.235.41 (0x2970EDA4:1) service keepalive IO request.
Nov 10 15:35:49.574 MET: BGP: 10.194.235.41 KEEPALIVE write request serviced in BGP_IO
CE_HOSTNAME#
Nov 10 15:35:50.598 MET: BGP: ses global FE80::2%GigabitEthernet0/1 (0x316FBDDC:1) Keep alive timer fired.
Nov 10 15:35:50.598 MET: BGP: FE80::2%GigabitEthernet0/1 KEEPALIVE requested (bgp_keepalive_timer_expired)
Nov 10 15:35:50.598 MET: BGP: ses global FE80::2%GigabitEthernet0/1 (0x316FBDDC:1) service keepalive IO request.
Nov 10 15:35:50.598 MET: BGP: FE80::2%GigabitEthernet0/1 KEEPALIVE write request serviced in BGP_IO
CE_HOSTNAME#
Nov 10 15:35:52.850 MET: BGP: 10.194.235.41 received KEEPALIVE, length (excl. header) 0
CE_HOSTNAME#
Nov 10 15:35:54.694 MET: BGP: FE80::1%ATM0/0/0.1 active went from Idle to Active
Nov 10 15:35:54.694 MET: BGP: FE80::1%ATM0/0/0.1 open active, local address FE80::2
Nov 10 15:35:54.698 MET: BGP: ses global FE80::1%ATM0/0/0.1 (0x296337B4:0) act Adding topology IPv6 Unicast:base
Nov 10 15:35:54.698 MET: BGP: ses global FE80::1%ATM0/0/0.1 (0x296337B4:0) act Send OPEN
Nov 10 15:35:54.698 MET: BGP: FE80::1%ATM0/0/0.1 active went from Active to OpenSent
Nov 10 15:35:54.698 MET: BGP: FE80::1%ATM0/0/0.1 active sending OPEN, version 4, my as: 65300, holdtime 180 seconds, ID AD53AB9
Nov 10 15:35:54.698 MET: BGP: FE80::1%ATM0/0/0.1 active KEEPALIVE write request serviced in BGP_IO
Nov 10 15:35:54.698 MET: BGP: FE80::1%ATM0/0/0.1 active service 2 read request in BGP_IO
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active KEEPALIVE write request serviced in BGP_IO
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active service 2 read request in BGP_IO
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active service 2 read request in BGP_IO
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active rcv message type 1, length (excl. header) 10
Nov 10 15:35:54.702 MET: BGP: ses global FE80::1%ATM0/0/0.1 (0x296337B4:0) act Receive OPEN
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active rcv OPEN, version 4, holdtime 90 seconds
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active rcv OPEN w/ OPTION parameter len: 0
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active went from OpenSent to Closing
Nov 10 15:35:54.702 MET: %BGP-3-NOTIFICATION: sent to neighbor FE80::1%ATM0/0/0.1 active 2/7 (unsupported/disjoint capability) 0 bytes
Nov 10 15:35:54.702 MET: BGP: ses global FE80::1%ATM0/0/0.1 (0x296337B4:0) act Send NOTIFICATION 2/7 (unsupported/disjoint capability) 0 bytes
Nov 10 15:35:54.702 MET: %BGP-4-MSGDUMP: unsupported or mal-formatted message received from FE80::1%ATM0/0/0.1:
FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 001D 0104 505A 005A 52D2 C023 00
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active rcv message type 3, length (excl. header) 2
Nov 10 15:35:54.702 MET: %BGP-3-NOTIFICATION: received from neighbor FE80::1%ATM0/0/0.1 active 2/5 (authentication failure) 0 bytes
Nov 10 15:35:54.702 MET: BGP: ses global FE80::1%ATM0/0/0.1 (0x296337B4:0) act Receive NOTIFICATION 2/5 (authentication failure) 0 bytes
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active bad state change from Closing to Closing
Nov 10 15:35:54.702 MET: -Traceback= 21B3370Cz 21B33C74z 21B34258z
Nov 10 15:35:54.702 MET: BGP: tbl IPv4 Unicast:base Service reset requests
Nov 10 15:35:54.702 MET: BGP: tbl IPv6 Unicast:base Service reset requests
Nov 10 15:35:54.702 MET: BGP: tbl VPNv4 Unicast:base Service reset requests
Nov 10 15:35:54.702 MET: BGP: tbl VPNv6 Unicast:base Service reset requests
Nov 10 15:35:54.702 MET: BGP: tbl IPv4 Multicast:base Service reset requests
Nov 10 15:35:54.702 MET: BGP: nbr_topo global FE80::1%ATM0/0/0.1 IPv6 Unicast:base (0x296337B4:0) NSF delete stale NSF not active
Nov 10 15:35:54.702 MET: BGP: nbr_topo global FE80::1%ATM0/0/0.1 IPv6 Unicast:base (0x296337B4:0) NSF no stale paths state is NSF not active
Nov 10 15:35:54.702 MET: BGP: nbr_topo global FE80::1%ATM0/0/0.1 IPv6 Unicast:base (0x296337B4:0) Resetting ALL counters.
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active closing
Nov 10 15:35:54.702 MET: BGP: ses global FE80::1%ATM0/0/0.1 (0x296337B4:0) act Session close and reset neighbor FE80::1%ATM0/0/0.1 topostate
Nov 10 15:35:54.702 MET: BGP: nbr_topo global FE80::1%ATM0/0/0.1 IPv6 Unicast:base (0x296337B4:0) Resetting ALL counters.
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active went from Closing to Idle
Nov 10 15:35:54.702 MET: %BGP_SESSION-5-ADJCHANGE: neighbor FE80::1%ATM0/0/0.1 IPv6 Unicast topology base removed from session BGP Notification sent
CE_HOSTNAME#CE_HOSTNAME#
Nov 10 15:35:49.574 MET: BGP: ses global 10.194.235.41 (0x2970EDA4:1) Keep alive timer fired.
Nov 10 15:35:49.574 MET: BGP: 10.194.235.41 KEEPALIVE requested (bgp_keepalive_timer_expired)
Nov 10 15:35:49.574 MET: BGP: ses global 10.194.235.41 (0x2970EDA4:1) service keepalive IO request.
Nov 10 15:35:49.574 MET: BGP: 10.194.235.41 KEEPALIVE write request serviced in BGP_IO
CE_HOSTNAME#
Nov 10 15:35:50.598 MET: BGP: ses global FE80::2%GigabitEthernet0/1 (0x316FBDDC:1) Keep alive timer fired.
Nov 10 15:35:50.598 MET: BGP: FE80::2%GigabitEthernet0/1 KEEPALIVE requested (bgp_keepalive_timer_expired)
Nov 10 15:35:50.598 MET: BGP: ses global FE80::2%GigabitEthernet0/1 (0x316FBDDC:1) service keepalive IO request.
Nov 10 15:35:50.598 MET: BGP: FE80::2%GigabitEthernet0/1 KEEPALIVE write request serviced in BGP_IO
CE_HOSTNAME#
Nov 10 15:35:52.850 MET: BGP: 10.194.235.41 received KEEPALIVE, length (excl. header) 0
CE_HOSTNAME#
Nov 10 15:35:54.694 MET: BGP: FE80::1%ATM0/0/0.1 active went from Idle to Active
Nov 10 15:35:54.694 MET: BGP: FE80::1%ATM0/0/0.1 open active, local address FE80::2
Nov 10 15:35:54.698 MET: BGP: ses global FE80::1%ATM0/0/0.1 (0x296337B4:0) act Adding topology IPv6 Unicast:base
Nov 10 15:35:54.698 MET: BGP: ses global FE80::1%ATM0/0/0.1 (0x296337B4:0) act Send OPEN
Nov 10 15:35:54.698 MET: BGP: FE80::1%ATM0/0/0.1 active went from Active to OpenSent
Nov 10 15:35:54.698 MET: BGP: FE80::1%ATM0/0/0.1 active sending OPEN, version 4, my as: 65300, holdtime 180 seconds, ID AD53AB9
Nov 10 15:35:54.698 MET: BGP: FE80::1%ATM0/0/0.1 active KEEPALIVE write request serviced in BGP_IO
Nov 10 15:35:54.698 MET: BGP: FE80::1%ATM0/0/0.1 active service 2 read request in BGP_IO
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active KEEPALIVE write request serviced in BGP_IO
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active service 2 read request in BGP_IO
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active service 2 read request in BGP_IO
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active rcv message type 1, length (excl. header) 10
Nov 10 15:35:54.702 MET: BGP: ses global FE80::1%ATM0/0/0.1 (0x296337B4:0) act Receive OPEN
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active rcv OPEN, version 4, holdtime 90 seconds
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active rcv OPEN w/ OPTION parameter len: 0
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active went from OpenSent to Closing
Nov 10 15:35:54.702 MET: %BGP-3-NOTIFICATION: sent to neighbor FE80::1%ATM0/0/0.1 active 2/7 (unsupported/disjoint capability) 0 bytes
Nov 10 15:35:54.702 MET: BGP: ses global FE80::1%ATM0/0/0.1 (0x296337B4:0) act Send NOTIFICATION 2/7 (unsupported/disjoint capability) 0 bytes
Nov 10 15:35:54.702 MET: %BGP-4-MSGDUMP: unsupported or mal-formatted message received from FE80::1%ATM0/0/0.1:
FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 001D 0104 505A 005A 52D2 C023 00
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active rcv message type 3, length (excl. header) 2
Nov 10 15:35:54.702 MET: %BGP-3-NOTIFICATION: received from neighbor FE80::1%ATM0/0/0.1 active 2/5 (authentication failure) 0 bytes
Nov 10 15:35:54.702 MET: BGP: ses global FE80::1%ATM0/0/0.1 (0x296337B4:0) act Receive NOTIFICATION 2/5 (authentication failure) 0 bytes
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active bad state change from Closing to Closing
Nov 10 15:35:54.702 MET: -Traceback= 21B3370Cz 21B33C74z 21B34258z
Nov 10 15:35:54.702 MET: BGP: tbl IPv4 Unicast:base Service reset requests
Nov 10 15:35:54.702 MET: BGP: tbl IPv6 Unicast:base Service reset requests
Nov 10 15:35:54.702 MET: BGP: tbl VPNv4 Unicast:base Service reset requests
Nov 10 15:35:54.702 MET: BGP: tbl VPNv6 Unicast:base Service reset requests
Nov 10 15:35:54.702 MET: BGP: tbl IPv4 Multicast:base Service reset requests
Nov 10 15:35:54.702 MET: BGP: nbr_topo global FE80::1%ATM0/0/0.1 IPv6 Unicast:base (0x296337B4:0) NSF delete stale NSF not active
Nov 10 15:35:54.702 MET: BGP: nbr_topo global FE80::1%ATM0/0/0.1 IPv6 Unicast:base (0x296337B4:0) NSF no stale paths state is NSF not active
Nov 10 15:35:54.702 MET: BGP: nbr_topo global FE80::1%ATM0/0/0.1 IPv6 Unicast:base (0x296337B4:0) Resetting ALL counters.
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active closing
Nov 10 15:35:54.702 MET: BGP: ses global FE80::1%ATM0/0/0.1 (0x296337B4:0) act Session close and reset neighbor FE80::1%ATM0/0/0.1 topostate
Nov 10 15:35:54.702 MET: BGP: nbr_topo global FE80::1%ATM0/0/0.1 IPv6 Unicast:base (0x296337B4:0) Resetting ALL counters.
Nov 10 15:35:54.702 MET: BGP: FE80::1%ATM0/0/0.1 active went from Closing to Idle
Nov 10 15:35:54.702 MET: %BGP_SESSION-5-ADJCHANGE: neighbor FE80::1%ATM0/0/0.1 IPv6 Unicast topology base removed from session BGP Notification sent
CE_HOSTNAME#

How to share an airport disc between PC and Mac

I am planning to buy a airport station and connect my existing USB hard disc for sharing the data wirelessly among my PC and Mac book.
My existing USB hard disc was partitioned into two parts to cater for different formats for PC and Mac book. One of the partition is used solely for Mac for backing up by time machine. The other is for sharing.
Please advise if this can function the same by connecting to the airport station for using wirelessly.

My existing USB hard disc was partitioned into two parts to cater for different formats for PC and Mac book.
If one of the partitions is formatted for NTFS, the AirPort Base Station will NOT be able to read it or share it out to network clients. The AirPort works best with drives formatted for HPS+ and will share these drives out to Macs (using AFP) and PCs (using SMB).
One of the partition is used solely for Mac for backing up by time machine. The other is for sharing.
Unfortunately Apple does not support Time Machine backups to AirPort Disks (USB HDDs attached to the AirPort Extreme). ref: Time Machine doesn't back up to AirPort Disks

Share local CVS Folder between SQLDeveloper and TortoiseCVS?

Similar Messages

Maybe you are looking for