Shared DPs and Boundaries

When you enable distribution point sharing during migration, it creates boundary groups and adds the CM07 DPs to the boundary groups. I've found that this causes content location issues for CM12 clients. For example, I have a few pilot machines
with CM12 clients. If I deploy an application or package to those systems, they look for the content on the shared DP and not the CM12 DP. This happens even when I create another boundary group and add the CM12 DP as well as the client's boundary.
Why does the client prioritize the shared DP over the CM12 DP?
Hopefully my description makes sense!
Thanks for any inisght!
Jeff

Hi,
Please refer to the link below:
How Preferred Distribution Points and Fallback is working in Configuration Manager 2012
https://sccmguru.wordpress.com/2012/05/08/how-preferred-distribution-points-and-fallback-is-working-in-configuration-manager-2012/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

Can i edit my game center account to stop sharing friends and games from another apple id that associated with my own new apple id.how to reset it without losing my apple id and i can stiil use it?

Can i edit my game center account to stop sharing friends and games from another apple id that associated with my own new apple id.how to reset it without losing my apple id and i can stiil use it? Because i've made lot of paid purchases using this apple id. In my game center account i have so many games data that i'd never installed.i wanna stop sharing friends and games with this xxx apple id in my old ipad version ios 4.2. and i can still keep using this apple id in my new ipad 3rd gen version ios 6 without sharing game and friends with this xxx apple id? and how to remove the games data that i never downloaded in my ipad but still registered at my game center account.i wanna keep using this apple id coz so many fav application i've purchased from this id. the answer as soon as possible if there is some one can help me to solve it.thank u for reading my question and very big thanks for anyone who can give me a helpful answer.

Why do you ask in the iWeb forum?

HT4968 How can I take a shared calendar and recreate it using my personal ical rather than having to share?

Here's the deal. I stepped into an administrative position last fall and began building an entire calender schedule for our summer 2014 program. I put a lot of work into building two months, however I have only just realized that the apple ID is for the former person who had my job (she left herself logged in on the mac I am now using). My fault for assuming the apple id and login would be the same as the email account I am responsible for.
I did manage to share one of the calendars I created using her apple ID, so I still have access, however, I'd feel better if I could somehow take this "shared" calendar and keep it as my own using the apple ID for the email account I'm responsible for. In other words, is there a way to take a calendar that was shared with you by someone else and save it under my apple ID as MY primary calendar? I'm paranoid that this former employee will delete said shared calendar and I will have to start from scratch...

Before you start see if you can export the calendar to a .ics file via the File ➙ Export menu option. In your own account import the .ics file and that, hopefully, will bring in all the work you've done so far.
OT

What is difference between Shared ,Exclusive and Exclusive but not commulat

what is difference between Shared ,Exclusive and Exclusive but not commulative lock modes plese tell me

Lock objects are used to synchronize access to the same data by more than one program.
The lock mode controls whether several users can access data records at the same time. The lock mode can be assigned separately for each table in the lock object. When the lock is set, the corresponding lock entry is stored in the lock table of the system for each table.
There are three types of lock modes
1.Exclusive
2.Shared
3.Exclusive not cummulative
Exclusive lock: The locked data can only be displayed or edited by a single user. A request for another exclusive lock or for a shared lock is rejected.
Shared lock: More than one user can access the locked data at the same time in display mode. A request for another shared lock is accepted, even if it comes from another user. An exclusive lock is rejected.
Exclusive but not cumulative: Exclusive locks can be requested several times from the same transaction and are processed successively. In contrast, exclusive but not cumulative locks can be called only once from the same transaction. All other lock requests are rejected.
please go through these links:
http://help.sap.com/saphelp_nw04/helpdata/en/a2/3547360f2ea61fe10000009b38f839/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/22ab01dd0b11d1952000a0c929b3c3/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eeb2446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eebf446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eed9446011d189700000e8322d00/frameset.htm
briefly :
You can lock the table or record by using following types of locking:
1) Exclusive (E) the locked data can only be displayed or modified by single user i.e the owner of the object. Access to other users is denied.
2) Shared (S) several users can access the same record simultaneously, but only in display mode and except the first one, who has asked for the data in update mode.
3) Exclusive not cumulating (X) it is similar to exclusive lock. It allows only a single user access. E can be called several times from the same transaction. In contrast, a lock type X can be called only once during the transaction. Any other call for this lock is rejected.
Activation of Lock Object
1) When you activate the lock object, the functions are automatically generated. And these are ENQUEUE-EZN and DEQUEUE-EZN. EZN is name of the lock object.
2) While ENQUEUE is used in program to set the code over the selected data depending upon the lock object arguments. DEQUEUE is used to release the lock.
Thanks
Seshu

How to upload a text file from a shared folder and provide an o/p

how to upload a text file from a shared folder and provide an o/p containing the details in each order in the text file

Hi,
Use GUI_UPLOAD to upload a text file from a shared folder.
Use GUI_DOWNLOAD to download data in a file on the presentation server or use OPEN DATASET, TRANSFER and CLOSE DATASET statements to download data to the application server.
Now, I hope the code for data fetching, if required, is already present in the report.
Reward points if the answer is helpful.
Regards,
Mukul

Windows 7 computers asking for network password to access shared files and printers on Windows XP PRO computer.

I have a network of 10 computers configured as peer-to-peer work group. I have upgraded one of the ten from Windows XP PRO to Windows 7 PRO. The other nine computers are all running XP PRO. AS near as I can tell they are all configured the same. I have the
same user and same passwords on all computers. One of XP computers is used as a print server. The Windows 7 computer initially was able to access shared files and printers on all XP machines with out requesting a network password.
Suddenly, the Win 7 computer began requesting a network password to access the shared files and printers on the XP print server. It will not accept any of the user names or passwords (all administrators on both machines with identical names and passwords.)
The Win 7 computer has no problem accessing the shared files on the other XP machines. It can even access shared printers in a different work group. Apparently something has changed but I'm at my wits end trying to figure what changed on either the Windows
7 machine or the print server XP machine.
I would appreciate any help. Thank you

Hi,
Based on my research, I would like to suggest the following:
1.
Disable simple file sharing on the Windows XP computer:
How to disable simple file sharing and how to set
permissions on a shared folder in Windows XP
2.
On the Windows 7 computer, go to “Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings” and ensure that the
following items are turned ON:
Network Discovery
File and printer sharing
And this one is OFF:
Password protected sharing
3.
Temporarily disable or remove all the security software (firewall, anti-virus, anti-spyware, etc.) on the computers and check if it works.
In addition,
I would like to share the following with you for your reference:
Troubleshoot file and printer
sharing
Hope this helps. Thanks.
Nicholas Li - MSFT

On Adobe DPS and tracking.

Hello,
I am a completely new member to this community. Thank you in advance for all that may take a look at the following questions.
I am writing from the agency side of advertising. One of our clients use Adobe DPS, and our agency will soon be promoting the client's app to drive monthly subscriptions.
First question :
Once a mobile user is driven to download the app i.e. post-click through, is it possible to tie subscriptions back to the ad source through 3rd-party tracking implementation? I'm assuming the answer is no, but I would like to just double-check for reassurance.
Second question :
Once a user has accessed this digital-content through the app, is it possible for the client to get any visibility into the engagments that happen within the app?
I think it may be answered here : http://blogs.adobe.com/digitalpublishing/ <--
but I am getting different answers about this issue from different sources.
The second part to that question : if those engagement metrics are available to the client using Adobe DPS, can those measurements customized? i.e. - would I be able to track how many page views each unique user has logged? I did take a look at the MPA metrics standard but those only seem to be sending back session duration, count of sessions, etc.
Thank you again.
mike

Hi Mike,
Here are the responses to your questions:
1) First question: The answer is as you suspected, "No".
2) Second question:Once the user has downloaded/installed the app then you can access to baseline analytics reports for basic reporting. You can also get access to Sitecatalyst that provides more deeper tracking. If you are entitling the users directly via direct entitltment; then yes you can track more detailed behavior on each user.
Shikha

Sharing photos and music on different devices

Hi
Please, please can someone help it's going to have to be step by step as although I've been using computers for last 20yrs its been windows and the only exposure I've had to apple is with my I phone which I struggle to follow some of the features. Me and my hubby are having lots of problems. We set up an I-tunes account some yrs ago then had I-phones then bought a galaxy nexus tablet and just now bought Packard bell laptop (which is nothing like my old laptop). We have both got separate apple id accounts which are also different to the iTunes account. W have been into the settings on both I-cloud and our I-phones and I-tunes to try and see how we can still have our separate apple id accounts with our own contacts etc but we want to share and view ach others photos we take on both our own phones and those we save to the laptop from external devices - we want to see all our photos from all devices and both apple id accounts. This is the same for iTunes. I'm really struggling, I've spent 2 days looking on here and all the replies to people are so technical or don't really help me.
Please can anyone advise???
Many Thanks
Dawn

If you want all users to be able to access the same music, but with different libraries, NikkiG's advice is spot on. However, I thought I'd throw in my 2¢ since I just set this up for a friend.
If you want all your users to have exactly the same library, and not just access to a shared library, do the following:
-move the entire "iTunes" folder (~/Music/iTunes) into the Shared folder or to separate drive.
-in each user's account, remove the iTunes folders (or just move them to a new location until you're positive this method works for you)
-pop open Terminal.app (/Applications/Utilities/Terminal.app) and here's where it gets a little dicey; type the following into the command line:
ln -s /Users/Shared/iTunes/ ~/Music/iTunes/
What this does is create a symbolic link (think alias, but more technical and powerful) between the iTunes folder in the Shared folder, and each user's iTunes folder. This way, each user is directly accessing the iTunes library, and not just through the shared area in iTunes itself. This allows them to add/remove music and playlists to the same library.
HOWEVER, this method will mess up if you have multiple users logged in and using iTunes at the same time.

Sharing Playlists and Music on the Same Computer with Different Users

I'm trying to share music and playlists between different users of the same computer.
Ideally I'd like to use the same iTunes music folder for all users, and have the same music and playlists show up no matter which user logs in (without having duplicate copies/files of the same songs clogging up our hard drive).
also would like to be able to sync our shared iPod no matter which user panel we're logged onto.
is any of this possible with the new version of iTunes?
thanks much i advance.
vince

If you want all users to be able to access the same music, but with different libraries, NikkiG's advice is spot on. However, I thought I'd throw in my 2¢ since I just set this up for a friend.
If you want all your users to have exactly the same library, and not just access to a shared library, do the following:
-move the entire "iTunes" folder (~/Music/iTunes) into the Shared folder or to separate drive.
-in each user's account, remove the iTunes folders (or just move them to a new location until you're positive this method works for you)
-pop open Terminal.app (/Applications/Utilities/Terminal.app) and here's where it gets a little dicey; type the following into the command line:
ln -s /Users/Shared/iTunes/ ~/Music/iTunes/
What this does is create a symbolic link (think alias, but more technical and powerful) between the iTunes folder in the Shared folder, and each user's iTunes folder. This way, each user is directly accessing the iTunes library, and not just through the shared area in iTunes itself. This allows them to add/remove music and playlists to the same library.
HOWEVER, this method will mess up if you have multiple users logged in and using iTunes at the same time.

HT1495 My Wife and I have separate accounts on the same Macbook Pro. I have moved the iTunes library to a shared area and we can both access it, however, my Wife (secondary user)can't import cd's. Is there something we are missing and is there a way to d

My Wife and I have separate accounts on the same Macbook Pro. I have moved the iTunes library to a shared area and we can both access it, however, my Wife (secondary user)can't import cd's. Is there something we are missing and is there a way to do this?

You are more likely to get relavant and useful suggestions posting to the Mac forums instead of the iTunes for Windows forum where you've posted.

Trouble sharing Music and Photos on new Mac Book Pro

I am loving my new Mac Book Pro. Front Row seems quite promising, but I'm having problems with shared music and photos.
I have an airport network in my home and have most of my music and photos stored on my desktop (Dual G4). When I open iTunes on my new MBP the shared music works just fine. Similarly, iPhotos shows the shared photos from my desktop on my MBP.
But, when I try using Front Row, I get an error message saying that there is no shared content. I found a work around that seems to work most (but not all) of the time. If I open iTunes first, start playing a song (shared from the desktop) and then switch over to Front Row it shows that song as now playing and then the rest of the shared music is available.
I have used Software Update to download the latest version of all software on both computers and for my airport network.
Any help you can offer will be greatly appreciated.
Thanks,
David
Mac Book Pro, G4 desktop Mac OS X (10.4.8)

Heya David,
If you haven't already please update to 10.4.8. If issue persists then try the following:
Remove the following files to the trash (do not empty until you test for function):
~/library/caches
~/library/preferences/com.apple.itunes.plist
~/library/prefernces/com.apple.iphoto.plist
~/library/preferences/com.apple.frontrow.plist
- Repair your permissions - > http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh17.html
- Restart your computer again
- Test and see how its working
Hope that helps!

What is my best option for a family plan. We have 1 smartphone that uses very little data a usually wifi is avaiable and 3 basic phones. Currently we have 700 shared minutes and unlimited texting. And 30 data. I don't think he needs that much as wifi is e

What is the best family plan option. Currently have one smart phone with 30gb of data and 3 basic phones. Also have home phone for $20/month. Current plan is 700 shared minutes and unlimited texting. My bill is close to $200/month, looking to lower if possible.

On a tablet- pse forgive typos....
Great Advice given earlier by SuzyQ - I believe the question not asked of you is ---what do you want to pay for the services that you need. I think that it would narrow the groups suggestions if you could narrow your needs.
For example: I need talk and text on 4 phones and some data say, 2 Gig, on only one of the phones. what plan is the best cost for me? You may also need to ask what the cost may be to switch to a different plan. I suspect that there will be no cost within Verizon-but ask anyway.
I do not think that you can have a smart phone on any Verizon plan unless you agree to buy data for that phone. Also, you said that wifi is often available-however, I do not believe that Verizon allows talking over wifi without consuming airtime minutes-only data over wifi avoids your allowance to be impacted.
As most here already know, several other service providers offer wifi-friendly service (talk/text/data) that will provide home/business/restaurant service without impacting your allowance- just not here.
After getting some suggestions here, call 611 and confirm availibility and price.
Best of luck in your research.

Problem with dsc shared shared variables and error 1950679023

I'm having trouble using shared variables on my laptop PC (with Windows XP) using Labview 8.2 and DSC. I've set up a simple project with one VI and one shared variable library. In the VI, I have a while loop that writes a number from a front panel control to the shared variable. Another loop running in parallel reads the shared variable and displays to an indicator on the front panel. The VI resides on my PC (no remote targets). This program executes just fine on my desk top PC; however I get the following error codes out of the shared variable nodes when I run the project and VI on my laptop for the write and read, respectively: ni_tagger_lv_Write 180121604 ni_tagger_lv_Read -1950679023 I've tried to manually deploy the shared variable library without success. The NI knowledge base and other entries on this forum suggested that the Windows firewall should be disabled for a quick fix, however, the firewall was already disabled on my lap top. I didn't see any entries regarding the 180121604 error code.
Any suggestions would be appreciated.

The problem has mysteriously gone away. For about the 10th time, I manually deployed the share variable library, and it started to work properly.

Using Shared Variables and Initialize Front Panel Binding (to PSP)

Hi,
I use LV DSC RT 8.2.1
I have a Vacuum System That includes signals from - Pumps failure, Valves status, Vacuum gauge, start Pump ...
Each signal is read by a FieldPoint.
All the relevant FieldPoint Channels are read by the Server (a computer in the Ethernet Network) and published to the network in the form of Shared Variables.
I have a client VI that is reading the Shared Variables published by the Server using Front Panel Binding.
Problem :
Some of the Bindings are in the mode 'Write &Read' and that causes some initialization problems.
For example - Valve #1 is Open, and then a User start running the Client VI, (the Valve #1 Status mode is 'Write & Read")
if in the VI the status of Valve #1 is closed (before running it) then the Valve status is changing to Closed.
I want the Client VI to first read the Physical status of the instrument and then to change the Value if the User changes it.
But that's seems to be a problem when using Front Panel Binding... (is it?)
I know I can Deploy a lvlib in the Client Side and Item Bind to the Shared Variables or Use DataSocket.
(Is DataSocket is a Reliable method when connecting to Shared Variables? What are the disadvantages when using DataSocket?)
What is recommended by those of you that are experienced or by NI ?
Sincerely Yours,
Amitai Abramson.

Amitai Abramson,
Hello and thanks for using the NI Forums.
I'm glad that you've read the Using the LabVIEW Shared Variable Tutorial on our website. Check out these other resources:
Network Variable Technical Overview
Troubleshooting Network-Published Shared Variables
Why Do I See Unexpected Value Change Events for Shared Variables Using LabVIEW DSC?
All You Need to Know About Shared Variables
Creating a Value Change Event for Shared Variables
Alternative Method for Using Shared Variables Between Systems in LabVIEW 8.x
What Is The Difference Between Using Shared Variables And DataSocket VIs To Access OPC Tags?
The issue that you are seeing by having "Write & Read" bound items on both the server and client side is essentially a race condition, you don't know which one is being read/written at what time. To resolve this issue I would take a look at some of the documents below.
Using a Local, Global, or Shared Variable in Parallel Loops Can Cause Race Conditions
Using Local and Global Variables Carefully
Tutorial: Local Variable, Global Variable, and Race Conditions
Locking a Shared Resource or Variable in LabVIEW Using Semaphores
You mentioned not wanting to have two sets of shared variables (one on each side), but this is a great method to resovle this issue, that, or you can develope some sort of hand shaking to prevent these race conditions.
I would suggest that in the future when using these forums you try to ask only one question per thread and make it more concise. It's hard to tackle multiple questions and such broad questions as "I want to know all the ways that I can connect to Shared Variables, and I want to know the advantages and disadvantages." I suggest this because we want you to get your questions answered and more concise questions will result in quicker and better answers.
Message Edited by Ben S on 10-01-2009 06:05 PM
Ben Sisney
FlexRIO V&V Engineer
National Instruments

Shared mailbox and personal mailbox showing identical content in Outlook

I have one user on Outlook 2010 who has Full Access permissions to a shared mailbox. In OWA, everything looks fine, but in Outlook, the shared mailbox shows the contents of her personal mailbox instead of the content of the shared mailbox.
If she views the shared mailbox's Inbox, it shows her the contents of her own Inbox instead of the shared mailbox. If she attempts to view the shared mailbox's Calendar, it shows her nothing at all. There are no error messages.
I configured a separate Mail profile (via Control Panel) for the shared mailbox, and that works fine also.
I deleted her Mail profile and all cached Outlook data, then created a new profile, and let Outlook recache all the data. Same problem.
Any ideas what is going on or how to fix it?
Blog /
Facebook / Twitter

Finally some moderately helpful info:
The end user logs into a computer on an untrusted, foreign AD domain (domain2.com) using an account from that domain. She then logs into her Exchange mailbox in Outlook using her domain.com account.
Every domain2.com computer she logs into gives her the same random mailbox mirroring problem.
I had her log into Outlook on a computer on domain.com located in my office and leave it running for 3 days. Every time her Outlook client on her regular computer would start or stop mirroring mailboxes, she would let me know, and I'd check the computer
in my office and find no problem.
So the problem is something in the foreign domain or something that that domain's administrators are doing to the computers. Unfortunately, several other people on that domain are using mailboxes and shared mailboxes on my Exchange servers in the exact same
configuration and are not having this problem. It is only this one user.
I am pretty sure they are not using roaming profiles. I know they are not using mandatory profiles.
Blog /
Twitter

Shared DPs and Boundaries

Similar Messages

Maybe you are looking for