Shared numberVar for Group

Dear All,
I have made a report which has 1 group called Project Number. The report contains Sales Order Project Number which is a Row level database field and Sales Order Document Total
Now I have made a 2nd Report which is from AR Invoice which also has a 1 group and has Project Number which is a Row Level database field and AR invoice Document Total
Now I am trying to attach the AR Invoice report as a subreport in the Main Sales Order report and want to bring the AR Invoice document total in the corresponding group level of Sales Order. Means the basic concept of this whole report is to have for a particular Project Number what is the Sales Order Document Total and for it what is the AR invoice document Total been made so that I can get a backlog figure.
I have tried to use the formula's as followings :
Sales Order Formula 1
shared numberVar InvoiceValue;
AR Invoice Formula 2
shared numberVar InvoiceValue :=ToNumber ({Command. Total Invoice Value})
And I have bought the formula 1 in Sales Order report in Group Header.
Now the problem is that for the groups for which AR invoice document total is not there the formula is brining the values for the above document total.
Basically I want that the formula should work for group level and not for individual lines. If the coressponding Sales Order project number has corresponding AR Invoice project number document total then it should bring or else not.
Please advise how to crack it.
Best Regards,
Swamy

Few Things
All Shared Numbervar formula should really start with
whileprintingrecords;
The vars in Main report and Subreport should have different names eg IInvoiceValueAR and InvoiceValueSO, use another formula in main report to add them together.
@total
Whileprintingrecords;
shared numbervar IInvoiceValueAR + shared numbervar IInvoiceValueSO
To overcome empty AR report make sure you reset the variable, place reset formual in AR subreport header
@reset
Whileprintingrecords;
shared numbervar IInvoiceValueAR:=0
Ian

Similar Messages

RMS Protected PDF using RMS Sharing Application for Group Usesr

Hi,
I have RMS Connector on premise & AZURE IRM server. I am protecting PDF document using RMS Sharing Application but when I am assigning permission to Group it does not open document saying that you don't have permission. But When I share the same document
to single user it works.

Hi,
As an owner you always have OWNERS permissions to the content you protect using RMS.
1. Are you protecting your pdf in place or share protected?
2. Are you assinging permissions using group e-mail instead of the group name?
3. Are you using the newest version of RMS Sharing App - please update
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

OneDrive for Business/SharePoint API - GET folders 'shared with me' if shared from a group/s.

Does anybody have any ideas of how to get the list of folders shared with a user from a group?
I can already retrieve files shared with a user from another user with:
https://{tenant}-my.sharepoint.com/_api/search/query?querytext='(SharedWithUsersOWSUSER: {account_name} AND contentclass:STS_ListItem_MySiteDocumentLibrary)'
but this end point does not show any of the files if they were shared from a group, is this possible with the REST API?
Thanks for any help in advance.

Hi SpringComp,
You can change the root path for libraries you sync to your computer, though you can do this only if you’re not currently syncing any libraries. If you’re already syncing at least one library and you want to change the path, you must first
stop syncing all libraries. Then, the first time you run the OneDrive for Business wizard to sync a library to your computer, you’ll see an option to change the location.
More information, please refer to the link:
http://office.microsoft.com/en-001/support/change-the-location-where-you-sync-sharepoint-libraries-on-your-computer-HA102893480.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How to setup a shared addressbook for multiple users (Family) or a group?

I want to have a centralized addressbook for my family and thought, the addressbookserver would provide that.
I have actually setup 2 useraccounts on the server, activated the addressbookservice and set up a new addressbookaccount in Mail, Contacts, Calender on the clients.
What I get is two individual addressbooks hosted on the server.
What I wanted to get is to see a common addressbook for group contacts.
What did I wrong?
Where on the server are the addressbook files stored?
Thanks in advance

thx for reading, actually I found the answers a few seconds after posting my questions in " More like this".

Totals for Groups not adding

Hello,
I created a report for our Scheduling team here and I thought it was working nicely and someone found that my totals are not adding up.
In the Group Header Reset I have:
WhilePrintingRecords;
Shared NumberVar PastDue :=0;
Shared NumberVar Day1Value :=0;
Shared NumberVar Day2Value :=0;
Shared NumberVar Day3Value :=0;
Shared NumberVar Day4Value :=0;
Shared NumberVar Day5Value :=0;
Shared NumberVar Day6Value :=0;
Shared NumberVar Day7Value :=0;
Shared NumberVar Day8Value :=0;
Shared NumberVar Day9Value :=0;
Shared NumberVar Day10Value :=0;
Shared NumberVar SDay1 :=0;
Shared NumberVar SDay2 :=0;
Shared NumberVar SDay3 :=0;
Shared NumberVar SDay4 :=0;
Shared NumberVar SDay5 :=0;
Shared NumberVar SDay6 :=0;
Shared NumberVar SDay7 :=0;
Shared NumberVar SDay8 :=0;
Shared NumberVar SDay9 :=0;
Shared NumberVar SDay10 :=0;
Day 1 Values (Day1Value should hold totals, but it's only holding the last value it seen, Detail Section)
WhilePrintingRecords;
Shared NumberVar Day1Value;
if IsNull({V_SHIP_SCHED.DAY_1}) then 0
else {V_SHIP_SCHED.DAY_1};
Day1Value := {V_SHIP_SCHED.DAY_1} + Day1Value;
Day 1 Totals (Group Footer Section)
WhilePrintingRecords;
Shared NumberVar Day1Value;
Day1Value;
Not sure why it's happening. Any ideas?

Okay found out my Totals in the Group Footer are working, it's just in the detail not working.
When I do this:
WhilePrintingRecords;
Shared NumberVar Day1Value;
if IsNull({V_SHIP_SCHED.DAY_1}) then 0
else {V_SHIP_SCHED.DAY_1};
Day1Value := {V_SHIP_SCHED.DAY_1} + Day1Value;
it printing out the First line amount being correct but the next line it's adding the first line with the second line and giving it total
ie: Customer 1 - Day 1 = 100
     Customer 2 - Day 1 = 200
Then when printing it doing this:
                         Day 1
Customer 1     100
Customer 2     300
Total               300
What I need to do this:
                         Day 1
Customer 1     100
Customer 2     200
Total               300
Thanks.

Is is possible to use creative cloud as a shared volume for collaboration between incopy & indesign?

I'm a designer student and as a designer, I constantly have to make decks for presentations. I typically work in a group of six and because I'm confident with graphic design, I tend to be the leader of these tasks. I've found the best workflow for slide creation is Indesign. Unfortunatly, I'm just an awful writer— so when I heard about Incopy's collabrative features(saw the post from indesign's facebook page) I saw oppertunity and got very excited. My teamates and I typically all have subscriptions to adobe cc because of this, I was wondering (since I havent used it at all) if the storage given out from adobe cc was able to be that shared volume that is required for the live link between incopy stories and indesign layouts.
Therefore,
Is is possible to use creative cloud as a shared volume for collaboration between Incopy & Indesign?
If this needs any further clarification I'll gladly write a more detailed question — lastly, if this is not possible might you suggest an alternative? Please assume that we go to school together but we work offsite also.

You will not be able to use the Files page at https://creative.adobe.com/files for collaboration in this way. But you can share individual files in this way.
When folder sharing is available this will be possible.

Location of security xml files for groups

We are having some issues migrating security(only) from one sysmte to another in EPM 11.1.2 for a planning application. Is there any other way to migrate security?
Where are the xmls for each group's security stored?

John,
We are working with Oracle on an MSAD issue in one of our environments. One of their suggestions is to recreate the essbase.sec file. Since all security needs to be rebuilt from scratch after this happens(and we have A LOT of security), we were wondering if we could somehow save all the groups etc if we locate the xml's for the same. Would it be possible to save all the security for groups etc in shared services somehow?

Read Only for "Group" and "Others" via SMB

I see when Windows vista users of my OS X 10.5.8 server save a file to the server, the permissions show on the server as Read & Write for the owner and Read Only for 'Group' and 'Others'.
Is there a way I can make the OS X server always make 'Group' and 'Others' always be Read & Write?
Thanks!

It's using a shared component LOV cleverly called LOV_YN which consists of a static LOV with
1 Display=Yes, Return=Y
2 Display=No, Return=N
The settings in the LOV section on the item iteself:
Named LOV: LOV_YN
Display Extra values: No Dynamic translation: Not translated
Number of columns: 2 Display null: No
Null display value is blank as is null return value
Item was setup as a radio group and was only converted over to a select list to work around this issue. Let me know what else you need and thanks again.
Rgds/Mark M.

HT4974 Changing file service location for Groups

Who has found the "separate interfaces" for File Service data mentioned in the referenced article? I cannot figure out how to get Mountain Lion OS X Server to move away from the /Groups folder for Group Services.
TIA,
Tim

Hi there
I have been looking at this also and am also very annoyed that Apple has chosen not to surface this functionality in the Server administration GUI for system administrators. It must be part of their drive to 'prettify' OS X Server — a terrrible mistake and the persons responsible should be sacked and some people with real (painful) sysadmin experience be put in responsibility. Strong words I know, but read on...
The minute someone decides to install OS X Server they go from being a 'user' to being, whether they like it or not, a 'sysadmin'. It is no trivial thing being a systems administrator, and sysadmins very quickly, with respect to touching systems, become familiar with this sentiment : "Be afraid, be very afraid..."
The functionality to change the location of the File Sharing — Groups, Server Public (Shared Items) & Users — mount points exists in OS X Server. In fact it can (should be able to I believe — I have not tried it... yet) be changed with one command... if necessary preparations have been done.
To view all the server settings for file sharing issue this command in Terminal:
sudo serveradmin settings sharing
we will then see the following for Groups (there is more listed for users etc. folders I haven't shown), I have blanked out some site specific information.
sharing:sharePointList:_array_id:/Groups:dsAttrTypeStandard\:GeneratedUID = "xxx"
sharing:sharePointList:_array_id:/Groups:smbName = "Groups"
sharing:sharePointList:_array_id:/Groups:afpIsGuestAccessEnabled = no
sharing:sharePointList:_array_id:/Groups:smbDirectoryMask = "0755"
sharing:sharePointList:_array_id:/Groups:ftpIsShared = no
sharing:sharePointList:_array_id:/Groups:afpName = "Groups"
sharing:sharePointList:_array_id:/Groups:smbCreateMask = "0644"
sharing:sharePointList:_array_id:/Groups:ftpIsGuestAccessEnabled = no
sharing:sharePointList:_array_id:/Groups:nfsExportRecord = _empty_array
sharing:sharePointList:_array_id:/Groups:path = "/Groups"
sharing:sharePointList:_array_id:/Groups:smbIsGuestAccessEnabled = no
sharing:sharePointList:_array_id:/Groups:name = "Groups"
sharing:sharePointList:_array_id:/Groups:smbInheritPermissions = no
sharing:sharePointList:_array_id:/Groups:ftpName = "Groups"
sharing:sharePointList:_array_id:/Groups:smbIsShared = yes
sharing:sharePointList:_array_id:/Groups:afpIsShared = yes
sharing:sharePointList:_array_id:/Groups:isIndexingEnabled = yes
sharing:sharePointList:_array_id:/Groups:dsAttrTypeNative\:sharepoint_group_id = "xxx"
sharing:sharePointList:_array_id:/Groups:mountedOnPath = "/"
This is based on, in my installation, of having the Groups folder in the original default location of "/Groups". One of the lines shows clearly what needs to be changed to move (change mount point) '/Groups' to a new location...
The concern I have with the way you moved the Groups folder is it may not work cleanly long term because just symbolically linking the folder may not be sufficient.
Also using rsync with '-avvE' options copies the extended attributes (ACLs) but setting/copying the (traditional) Unix owner and group ownership & permissions (which are also used by OS X) are not done. If the command is executed as root then all the copied files & directories will change owner & group to root's. The following rsync switches should be used
--owner
--group
--perms
preferably though the Unix 'cp' command should be used with the '-a' switch, something like this:
cp -a /Groups /Volumes/VolumeName/SomeNewFolder
N.B. no trailing '/' is used.
Of course this is untested by myself as yet, and you should check and confirm yourself. I have a Parallels OS X virtual machine I will install OS X Server on to try this, I will not do on my production server.
You will note that I have not listed the the serveradmin settings command to change where OS X Server should look for the '/Groups' folder can you see what it should be? I can post what I believe it should be if you wish, let me know.
Of course all of the above relies on the fact that OS X Server will not get 'upset' with us changing a setting outside of a, non-existant in the first place, GUI surfaced settting function. Which again is why I would like to test this on a virtualised server. Of course you can give it a try, I would be obviously interested to hear how it goes — I would do a full backup first though. After making the serveradmin settings change I would reboot the server.

Tiger Server - umask for RW for Group for New Folders?

Folks;
I've read numerous thread here and elsewhere and I've done what I believe to be the right thing BUT it just is not working!
A share with ACLs NOT enabled - using only AFP with Posix (not inherited).
What I want is for new folders to be created with rwxrwxr-x.
This appears to mean changing the umask to '002' or 2 'octal'.
So I have changed added an NSUmask (number =2) to:
/Library/Preferences/.GlobalPreferences.plist
I then rebooted the server.
What I observe is that folders are still created with ReadOnly for the Group.
Can someone point out what I need to do?
Thanks!
Steve
MacBook, G4; iBooks, iPod, iMac17 Mac OS X (10.4.8)

Folks;
OK now I am really confused.
I bailed on just using the Posix permissions.
In WGM I selected Sharing.
I selected the volume I am interested in.
On 'General' I set just 'Share this item..'
On 'Protocols' I select AFP and 'Inherit permissions from parent'
On 'Access' I set the Group (staff) to 'Read & Write'
Then using the action widget I 'propogate permissions' propogating the 'Group' permissions' to all children.
This all works fine.
When I mount the voume as a member of staff I see 'read/write' item.
When I create a new folder -> creates ReadOnly for the group!!
What the heck!!!
So I also test by leaving all above in place and adding back the global NSUmask as described here and elsewhere.
Same result!! Yes I rebooted the server...
Man o' man...
I have now spent a huge amount of time on this, what I thought would be a simple matter.....
Would some kind soul please describe a mechanism which will allow new folders to be read/write for group?
Thanks!
Steve
MacBook, G4; iBooks, iPod, iMac17 Mac OS X (10.4.8)

Hello, I have two questions on time capsule I can only have it on my external hd files and free up my internal memory to my mac I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

Hello, I have two questions on time capsule I can only have it on my external hd files and free up my internal memory to my mac I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

I have a mackbook pro and an iMac if I buy a time capsule 2tb airport, I can use it with time machine and what would be the best way to use it.
There is no particular setup required for TM.. both computers will create their own backup sparsebundle which is like a virtual disk.. Pondini explains the whole thing if you read the reference I gave you.
and how to use time capsule airport whit other external hd to use my old lacie airport with the new time capsule
Up to you.. you can plug the external drive into the TC and enjoy really slow file transfers or you can plug it into your computer and use it as external drive.. which is faster than the TC.. and TM can include it in the backup.
Again everything is explained in the reference.. you are not reading it.

How to add a new option for group by in a excel report

Hi,
there is a enhancement in a excel report
I need to add a new option for group by
help me
Regards,
Raghu

k

Screen Sharing works for alien hosts but not for LAN hosts

Hello!
I am having a really strange problem in a customer network. The network is a local private network with one MacOS Server 10.6.8 and around 12 iMacs running MacOS 10.6.8. The server is running headless in cellar so the user maintain the backup via screen sharing from an iMac to the server.
Since a few weeks they can not login to the server via screen sharing from any local host BUT I can login from my MBP (alien) via ARD or Screen Sharing without any problem. Even hosts connected to the network via VPN can connect to the server via screen sharing.
In short:
Every local host gets a message that login is not possible and my MBP and VPN-hosts get connected without any problems with the same credentials.
At the local clients I get this message in system.log:
Oct 28 09:33:41 verwaltung1 LKDCHelper[228]: Starting (uid=501)
Oct 28 09:33:48 verwaltung1 com.apple.launchd.peruser.501[166] (com.apple.Kerberos.renew.plist): Throttling respawn: Will start in 530 seconds
Oct 28 09:34:17 verwaltung1 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer[195]: CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
and at the server I get:
Oct 28 09:33:48 solserv AppleVNCServer[11503]: no such user: adminloc@LKDC:SHA1.DE03ABCC86F74D11AD139E44388D6B94155B4D9E: 2
When I connect from VPN or my MBP I get no messages in system.log.
I tried to kickstart ARD at the server but it does not change anything, I bound the clients to OpenDir of the server with no effect also.
I do not have any idea what is happening here. Every help is welcome,
Christop

Hello MrHoffmann!
changeip says "The names match. There is nothing to change."
To give more infos, the server and all the clients are connected to the same network switch, all belong to 192.168.183/24 and when I use my MBP, it is connected via WLAN and gets an IP-address from this server with an IP from this range. my MBP is in the same broadcast domain.
VPN clients connect via PPTP to the gateway (192.168.183.1) and get IP addresses assigned from 192.168.183.48-52.
There is no routing between the clients and the server.
There is no other problem - every client reaches the server for file serivces (AFP/SMB), smtp, imap, DHCP and DNS.
BTW. screen sharing from the clients worked without a problem when I first setup the network about 1 year ago, but since a few weeks no client that belongs to this network can use screen sharing except for my MBP when I am at customer site.
History:
The new SLS is a replacement for an old Windows 2000 Server. Both servers ran in parallel for some time but within different IP-networks (all Macs at 192.168.183/24 - all Windows at 192.168.2/24) the gateway routed between both networks. But now it is time to switch off every windows computer because every service now runs at the SLS. AFAIK the windows 2000 Server is the last Windows machine in the network. We switched off DHCP at the windows server and switched on DHCP at the SLS a few weeks ago. Hm .... maybe there is something wrong? But the clients have fixed ip-addresses.
Still wondering what is going on here, bye,
Christoph

Calculation of Depreciation for Group Asset

Hi Experts,
I am getting a problem while doing depreciation for group asset
Ex: 80,000; Rate 10%
total depreiaiton p.a is Rs 8000/-
as per the Indian standards if it is below 180 days it should take Rs 4000/-, but in my system it is showing Rs 3333.33
my depreciation start date & capitlization date is 01.11.2007.
Regards,
Satya Vani.

Dear,
Reshma.
Looking at your Questions let us take explanation for Group Assets :-
1 ) We need to create new different asset class for Group Class in OAOA. Then permit the depreciation area for only Group Asset in OAYM as it is in your current scenario India is Depreciation Area 15 Just select your company code in OAYM and check the Grp Asset field for respective area 15. Then go to OAAX here we have to maintain the assets classes particularly for Group Assets. So check your Group Asset classes for Group Assets. Cerate different Group asset classes for your said requirement.
In these depreciation areas, it is then possible to make an assignment to a group asset. You make this assignment in the specifications for the depreciation area in the asset master record. When you post an acquisition to this kind of asset, the system duplicates the line items from this depreciation area on the given group asset.
2 ) According to me you have to create different depreciation keys for Group Asset classes. Assign the Depreciation keys to your newly created Group Asset Classes in OAYZ and make sure you are deactivating 01 area which is Book Depreciation area.
3 ) As far as I know this is the only functionality available to handle Group Assets. How ever SAP does not have any standard Group Assets functionality. SAP does not supply asset classes to be used solely for group assets. It is we have to determine as per varying Business Process.
I hope this will clear your doubt makes you to understand. Please revert back for further clarification. Welcome you.
Regards,
Pankaj A Bhalerao.
Edited by: pankaj_ab on Feb 3, 2010 8:26 AM

What's the best Bluetooth file sharing app for iPhone

I'm trying to find a good BT file sharing app for an iPhone 5. I've noticed that the iPhone 5 won't even detect devices such as other phones or computers with BT but seems to have no issue with BT accessories such as satnav. My iPod touch has no problem detecting any BT device which seems odd.
So, is there a good BT file sharing app availble for an iPhone 5?

You won't find any Bluetooth File Sharing app that will work with non-iOS devices. That is something iOS simply does not support.

Shared numberVar for Group

Similar Messages

Maybe you are looking for