SharePoint 2007 Designer Concat Three Fields in Subject line

All,
I have a SharePoint 2007 Designer workflow and I'm trying to concat three fields into the subject line of an e-mail that gets fired without success.
I have to date created my variable then assigned that variable to the subject line of an e-mail that gets fired.
I've then set my Action as such in the workflow:
Set Variable:CustomSubjectEmail to [%HotDocs Ideas and Issues:Created By%], [%HotDocs Ideas and Issues:Request Type%], [%HotDocs Ideas and Issues:Category%]
However - no matter how I have the fields surrounded the actual text is passed into the subject and not the three fields concatted as I would like.
I've tried this several ways without the [] and without the surrounding % - but still I don't get the correct requests.

Hello,
Try with"workflow variable" (i think there is different name in SPD 2007 but you can find in action) to concatenate them then assign that variable as subject line.
Click on Actions -> Assign workflow variable-->Set Variable-->Click Actions -> Build Dynamic String-->then Store [%Variable] <your custom string goes here> in Varibale:customVariable
http://www.mssharepointtips.com/tip.asp?id=1158
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Similar Messages

Import Text From Form Field into Subject Line of Email

Hello,
Is there a way to import text from a form field into the subject line of the email when sending back (attaching) the PDF form? In other words, there is an "applicant name" and I would like that name to be the subject line of the email.
I am using Adobe Acrobat X (10.1.7)
If any one has aby guidance or resources online where I can locate this information I would greatly appreciate it! I have been searching all day but have not found a solution yet.
Thanks!

Thank you so much for the help. For some reason I cannot get it to work though. Now, when I hit the submit button it does not do anything.
Previously, I had the following code under
ACTIONS>Mouse Up>Submit a Form
mailto:[email protected]?subject=Employee Application
I removed the above mailto URL and put in your code as a Javascript function. I made sure that my field name matched the name in quotes within the code.
I used the following:
var subject = getField("lastname").value
this.mailDoc({
bUI: false,
cTo: "[email protected]",
cSubject: subject,
cMsg: "Type message here"
Do you see anything obvious that I am doing wrong?
Many thanks!

Sharepoint 2007 designer - sqldatasource and grid view not displaying on SP page (An unexpected error has occured)

Hi All,
I am using sharepoint designer 2007 and am trying to use a sqldatasource to populate a gridview and then display that on an .aspx page. While in designer everything seems to configure okay. I am able to test the connection and display the data
as expected from the sqldatasource within designer. Then I have the gridview control use the sqldatasource. At that point the grid (within designer) displays the headings as expected. The data that is displayed in the cells is "test data" rather
than actual data value - I'm not sure if this is normal - for example, the data values in every column / row are all equal to 'abc'. Date values are all equal to current date.
Then when I actually display the sharepoint page (via Preview in browser)  I get an error "An unexpected error has occurred".
I am using SQLExpress on my laptop as the database for the sqldatasource. I have tried both integrated (windows) and SQL authentication with the same results.
Here is the aspx code from designer:
<asp:GridView runat="server" id="GridView1" AutoGenerateColumns="False" DataSourceID="SqlDataSource1">
<Columns>
  <asp:boundfield DataField="Case Creation Date Time" HeaderText="Case Creation Date Time" SortExpression="Case Creation Date Time">
  </asp:boundfield>
  <asp:boundfield DataField="Case #" HeaderText="Case #" SortExpression="Case #">
  </asp:boundfield>
  <asp:boundfield DataField="Source" HeaderText="Source" SortExpression="Source">
  </asp:boundfield>
  <asp:boundfield DataField="Priority" HeaderText="Priority" SortExpression="Priority">
  </asp:boundfield>
  <asp:boundfield DataField="Status" HeaderText="Status" SortExpression="Status">
  </asp:boundfield>
  <asp:boundfield DataField="Category" HeaderText="Category" SortExpression="Category">
  </asp:boundfield>
  <asp:boundfield DataField="Creator group" HeaderText="Creator group" SortExpression="Creator group">
  </asp:boundfield>
  <asp:boundfield DataField="Assigned Group" HeaderText="Assigned Group" SortExpression="Assigned Group">
  </asp:boundfield>
  <asp:boundfield DataField="Security Event Title" HeaderText="Security Event Title" SortExpression="Security Event Title">
  </asp:boundfield>
  <asp:boundfield DataField="Security Event Resolution Details" HeaderText="Security Event Resolution Details" SortExpression="Security Event Resolution Details">
  </asp:boundfield>
  <asp:boundfield DataField="SLA Achieved" HeaderText="SLA Achieved" SortExpression="SLA Achieved">
  </asp:boundfield>
  <asp:boundfield DataField="Event Reported Date Time" HeaderText="Event Reported Date Time" SortExpression="Event Reported Date Time">
  </asp:boundfield>
</Columns>
</asp:GridView>
<br>
<br>
<br>
<asp:SqlDataSource runat="server" id="SqlDataSource1" ProviderName="System.Data.SqlClient" ConnectionString="Data Source=WN-MNA79GY0V0JD\SQLEXPRESS;Initial Catalog=CD_OPS_DATA;Persist Security Info=True;User ID=Sharepoint_User;Password="xxxxxx""
SelectCommand="SELECT * FROM [Critical Cases] ORDER BY [Case Creation Date Time] DESC">
</asp:SqlDataSource>
<br>
<br>
 </td>
</tr>
</table>
</asp:Content>
Any help is appreciated.
Thanks !

Thanks Daniel.
I am unable to connect to my SQL EXPRESS db on my laptop via SPD 2007: I get the error -
I am able to access that database via SQL Server Mgmt. Studio (both with Windows and SQL Server authentication). I can also access a SQL Express database on a remote server from the exact same SPD 2007 session: I get -
So, I wonder why I can connect to the remote but not the local? Anyway, if you have any ideas I would appreciate it. I am willing to do the work from the article you mention but wanted to rule out there being a simple DB access issue first. I'll also
start to find the ULS logs and review them.
Thanks again !!
Update on 1-3-14: Hi, since yesterday I also have been able to connect to the SQLEXPRESS database / table and display the .aspx page with the gridview in Visual Studio 2010.
Update 1-26-14: Sorry for the delayed response. I determined the reason why I could not connect to the SQLEXPRESS instance on my laptop was that there was a local host intrusion (firewall) rule on my machine that prevented an inbound connection
on port 1433. SharePoint server >>> inbound connect on port: 1433 >>> to Laptop device, not allowed.
Thanks.

Update Managed Metadata field in SharePoint 2013 Designer Workflow for O365

Hi Guys,
I need to update the managed metadata field in SharePoint Custom List using Workflow but its not working. I have also tried to use the HTTP WebService POST Operation but no luck.
Am doing this for a SharePoint Online (O365) Site.
Has anyone worked on something similar and was able to get it running ?
I saw a post to create a custom Workflow Activity but I don't have a choice to go with the custom code option.
http://patrickboom.wordpress.com/2013/07/23/workflow-activity-set-managed-metadata-column/
I was able to achieve this by creating a SP 2010 based Workflow for O365. Which means that it worked well with SP 2010.
Is there a different way to do it in 2013 ? I tried almost all options apart from creating custom Activity but nothing worked out.
Any help would be great.
Thanks,
Nutan
Nutan Sharma

Hi Nutan,
According to your description, my understanding is that you want to update Managed Metadata field with SharePoint 2013 Designer for SharePoint Online.
As far as I know, there is not an OOB action to achieve your requirement with SharePoint 2013 Designer for SharePoint 2013. Customizing a workflow action is a better option to achieve it. Why didn’t you customize a workflow action as Patrick’s blog?
In addition, please take a look at the article about Nintex workflow, check whether it is useful for you:
http://habaneroconsulting.com/insights/setting-managed-metadata-fields-in-a-nintex-workflow#.UykBSf6KDHo
As this issue is about SharePoint Online, I suggest you create a new thread on SharePoint Online forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=onlineservicessharepoint . More experts will assist you.
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

MS SharePoint 2010 Designer Workflow Email - Enhanced Rich Text Field look-up values on HTML email have large spaces

MS InfoPath 2010 form with RTF (Rich Text Fields)
MS SharePoint 2010 Custom Library
MS SharePoint 2010 Designer Workflow Send Email
http://office.microsoft.com/en-us/sharepoint-designer-help/send-e-mail-in-a-workflow-HA010239042.aspx
https://www.nothingbutsharepoint.com/sites/eusp/pages/creating-html-emails-with-spd-workflows.aspx
Hi all of the above work, our question is how to control the RTF (Rich Text Field) look up values to the InfoPath 2010 form in the HTML email?
How to FORMAT the RTF look up value? in the HTML email
EXAMPLE
we have a InfoPath 2010 form published in the SharePoint 2010 custom list library there are 5 RTF fields (Notes1, Notes2, Notes3, Notes4, Notes5) there are other plain text fields, date fields, and other field types in the form
We use a HTML table to make the email look like the InfoPath form, so when the users fill out the form and they get the email notification everything looks the same.
Our problem is the EXTRA LINE SPACE in the RTF look up values
We want to remove any leading spaces, and line spaces between HTML table cells
Our Workflow has the HTML in a Workflow variable, as you know it does not support remote CSS it has to be in-line style for any formatting we want all cells to have
valign="top" the email should align at the top of the cell, all field types do except the RTF look up values they make the email look bad and they contain a lot of white space.
Please test this in your enviroment
<table>
<tr><td>Title:</td><td>[%Current Item:Title%]</td><td>[%Current Item:Notes1%]</td></tr>
<tr><td>Created by:</td><td>[%Current Item:CreatedBy%]</td><td>[%Current Item:Notes2%]</td></tr>
<tr><td>Date Created:</td><td>[%Current Item:Created%]</td><td>[%Current Item:Notes3%]</td></tr>
<tr><td>Modified by:</td><td>[%Current Item:ModifiedBy%]</td><td>[%Current Item:Notes4%]</td></tr>
<tr><td>Date Modified:</td><td>[%Current Item:Modified%]</td><td>[%Current Item:Notes5%]</td></tr>
</table>
I could not update the question below to the proper forum section. that is why i am asking again.
http://social.technet.microsoft.com/Forums/en-US/a7918bfb-9166-4bdb-828c-132a0c7611e3/ms-sharepoint-2010-designer-workflow-emails-huge-lines-paces-in-rich-text-fields-values-from-ms?forum=sharepointcustomization
-Isaack

Hi IssackB,
perhaps you may try this article:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f8fa2a11-9f74-4dd2-b277-21ce872fdcb2/can-we-add-rich-text-editor-to-the-sharepoint-designer-2010-workflow?forum=sharepointcustomizationprevious
there are some notes that perhaps you may check:
Use the same font for all the controls to ensure consistent spacing between rows.
Choose Size from the Format menu, and then choose To Fit from the menu that appears. This adjusts the size of each control, depending on the font set for the data that appears
in the control.
NOTE: The Print Preview and Output To commands use different algorithms for calculating text width; therefore, the text may occupy more or less
space in the RTF file.
Reduce the amount of blank space above and below the report controls. Any vertical
space between the controls is converted to whole lines
in the RTF file. For example, a
space of .02 inches can increase to .1667 inches in the
RTF file.
Make sure controls on the same output row are not too close to each other or overlapping. This can cause the Output To command to omit the controls or to align the columns incorrectly
in the RTF file.
Use the Align command from the Format menu to ensure that a row of controls is aligned properly on the report. If a row of controls is not aligned properly, the Output To command may place the controls
in different rows, causing extra blank
spacein the RTF file.
and please have a check there are updates for exchange 2013 and will be available with the upcoming release of CU4 for Exchange 2013, that stated the format rtf was saved instead HTML. http://support.microsoft.com/kb/2862739/en-us
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Migrate the SharePoint 2007 Site containing SharePoint Designer Workflows with Infopath forms to SharePoint 2013

Hi,
We have a requirement to migrate the SharePoint 2007 Site containing SharePoint Designer Workflows with Info path forms to SharePoint 2013.
Can somebody please guide us as to what could be the best approach to go ahead?
Thanks in advance.
Regards,
Vijay

Use STSADM
backup and
restore to migrate SharePoint 2007 site
containing SharePoint Designer Workflows with Info path forms to SharePoint 2013.

Sharepoint 2007 - Possible to have customized ID and field auto-filling?

Hi guys.
I'm new to sharepoint, I have 2 questions that I could not get answers(mostly Sharepoint 2010 onwards) from Google, please help me.
1. I need to have an ID that is unique and with the format ABC123 ( 1 = Year, 2 = Month, 3 = running number) and I need to reset the running number to 0 on every year, are these possible in Sharepoint 2007?
2. My form will be having some fields that are identical, for example Student Name. I want to make other same fields have the same student name when users fill up or after submitted the form. Is this posisble in Sharepoint 2007?
Appreciate for all helps and suggestions.

About 1.
Where is the 'ID' belong to?
About 2.
I think you need develop some customized solution to accomplish this, for example, develop an Event Receiver.
Thanks a lot,
Hi Gavin,
Thanks for your help on this.
For question 1, I've got a requirement changed. That ID is actually a request ID, now users want it to be displayed on the form once the form is loaded, and that ID will be used as the Title. Is this possible? It sounds to me that the ID might be duplicate,
unless the ID is increased once the form is loaded. But there is a risk if users didn't save their forms and just close it, the ID would be out of order.

Sharepoint 2007 Sharepoint Designer Workflow migrate to Sharepoint 2013

SharePoint 2007 sites migration to SharePoint 2013, in SP2007 I have several workflows created using SharePoint Designer. Is it possible to migrate those Workflows to SharePoint 2013? If so, is SharePoint 2013 Workflow
Manager needed to run those Workflows?
BTW, I will be using third party migration tools to migrate SP2007 content to SP2013.

Hi John
I know one third party tool which is best in migration and it migrates designer workflows also
http://en.share-gate.com/sharepoint-migration
http://en.share-gate.com/
Please mark it as answer if it helps you finding your answer
Amit Kotha

How can I filter a Sharepoint 2007 libarry list based on current user login?

Hi all.
I would like to know how I can filter a SharePoint library list based on current user login.
Suppose I have created the followings:
1) A SharePoint form library containing bunch of uploaded InfoPath form data.
2) The InfoPath form template contains a promoted text field called "TargetUser" to store user domain login (ex: DOMAIN\JOE) and every InfoPath form file in the library has a valid domain name stored in the "TargetUser" field.
I have created a custom view for the form library and would like to filter this view so only items whose "TargetUser" field matches current user's login ID are displayed.
I went to Edit View page to customize the view and tried to use the [Me] function but I got a "Filter value is not a valid text string" message instead when clicking OK. Apparently [Me] returns a Person/Group data type and the filter cannot compare its value
to that of "TargetUser".
I tried using text functions (ex: TEXT([Me],"") hoping to extract default string value from [Me]. The filter accepts the parameter without any error but the resulting fitlered list does not display any items at all.
I have googled this subject for hours but I have not found any solution.
It would be greatly appreciated if anyone can help me to create a functional filtered list.
FYI, my SharePoint 2007 installation is just WSS 3.0 + Form Server. I do not have MOSS 2007 (so no MOSS 2007 web parts or web services).
Thank you.
Jason

Here's what I usually do in order to accomplish this. Ultimately you'll need to have 2 different fields. There's the one you already have, with DOMAIN\username stored in it. Then you'll need an additional field as a "person" column type.
Call it "TargetPerson" or something.
Create a sharepoint designer workflow that runs each time an item is created or changed. One action:
Set FIELD to VALUE.
The first FIELD is "TargetPerson", the VALUE is your "TargetUser" field.
Once this is done, then the person value is stored in the person field. This is the field that you can filter by "TargetPerson" is equal to [Me]
Laura Rogers, MCSE, MCTS
SharePoint911: SharePoint Consulting
Blog: http://www.sharepoint911.com/blogs/laura
Twitter: WonderLaura

Sharepoint 2007 - Creating a form to capture timesheets data, but need to track updates to previously submitted data

Hi,
We are using a basic version of Sharepoint 2007 and do not have access to InfoPath. I have created a list to allow team members to submit their weekly time on specific activities. How do I go about tracking any changes to previously submitted data?
For instance, a team member enters 5 hours for Activity 1 and submits on April 1. on April 10 they realize they submitted too few hours and want to go in to edit the 5 hours to 12 hours.
From a reporting perspective we already pulled a report (export to excel) and have the 5 hours listed for April 1. If the user goes in to edit their time sheet from April 1, we don't want the data to just override the 5 hours, we want some sort of flag to
show the hours went from 5 to 12 hours. How do we do this?
As a work around, I added a question at the beginning of the survey/list asking is this a new submission or an edit. I thought if they select edit and were taken to a screen that allowed them to select the date (April 1), the activity and the new hours that
I would have all of the previous data plus these 3 columns with the additional data: "Edit", "Activity 1", "12". Instead the original data was over written and all I show are blanks for the previous questions and the edited
info ("Edit", "Activity 1", "12").
What suggestions do you have so that I can maintain the integrity of the original data and flag for my Project Manager which data needs to be changed in previous reports.
Thanks in advance!
AA

I think the best way to answer your question would be to create a simple form and try various submissions. Be aware that unless the e-mail system is controlled, e-mail submission is not recommended due to client configuration issues of e-mail. Your question sounds like online submission would already be something you are comfortable with. In that case you can submit form data in 3 different ways: HTML, FDF, or XML. It can also be submitted as a PDF by saving the form, but that does not sound like what you need and also gets into issues of whether folks are using Reader or Acrobat.
Also be careful (or try both) about using forms from within Acrobat and the forms created by the link in Acrobat to Designer. Once you go to Designer with the form you can not come back for editing in Acrobat. Normally you would create the basic form in a word processor or layout tool and then add the form fields in Acrobat (or Designer if that is preferred).
I will let others address the anonymous and yet confirmation check issue.

How to auto populate data from one list in SharePoint 2007 into another list based on a key value?

Hi,
As a part of new requirement in my project I am supposd to work on SharePoint 2007. I have one List (BCExtract - Main list) with all data related to an Application (like ID, name, app manager RTO etc).
I have created another list which has form to be filled by a user (with details about his/her applications). My requirement is that when the user enters AIT ID then the page should refresh (probably after hitting enter) and other details like Application
name, RTO etc which is present in another list gets auto populated depending on the AIT ID (unique column) entered so reduce the burden on the user.
Please suggest me how this can be done. I do not have permission for obtaining SharePoint Designer and I do not know JQuery. Infopath is ok but if this can be done through SharePoint 2007 alone then it would be great.
Thanks....

Hello,
You can either use jquery/jaavscript or infopath form to achieve this. There is no default way to do this.
I would suggest jquery because you can put script in newform/editfor.aspx page using content editor webpart. Refer this link for jquery:
To get value from list:
http://social.technet.microsoft.com/Forums/en-US/ac47fe2a-ccb6-4f5b-b274-703aecc6cb0a/get-list-items-in-sharepoint-2010-by-using-jquery
http://www.robertkuzma.com/2010/08/read-list-items-using-sharepoint-web-services-and-jquery/
To set value in column:
http://paulgalvinsoldblog.wordpress.com/2009/06/13/quick-and-easy-use-jquery-to-set-a-text-field%E2%80%99s-value-on-a-sharepoint-form/
http://spservices.codeplex.com/discussions/468729
If you use infopath form, then you need to create two data connection to get data from both lists. Later you can set value in fields based on selection using rule. This can be possible without code.
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to change the background color for lookup column options in sharepoint 2007

Hi,
I have a custom List with 10 fields,and in the edit form we want to display only 6 fields,
So I have customized it with sharepoint designer 2007 ,designed a new custom edit form(Insert->ShaerPoint Controls->Custom List Form)
We are using IE8 Browser,and the site has JQuery 1.8 loaded .
The lookup columns is getting rendered as textbox and dropdown arrow image,instead of select html element.
When we click on arrow image,its displaying the values magically,So I am unable to highlight the options with text "ABC" in yellow background color
basically in the input textbox its storing all the lookup values as "ID|value "in choices attribute (I saw this in browser dev tools)
I tried to set the textbox color everytime it loses focus using blur,however its always returning the previous value instead of current selected value.
Is there any way we can achieve this,Any solutions/thoughts
Thanks everyone..

hi i bet you need to amend your jquery script to get onclick values and put it with like append HTML if you want to use Jquery.
Also did you know you could use javascript in calculated column with type number?
Check:
http://sharepointwijzer.nl/sharepoint-blog/tech/icc-html-calculated-column-sharepoint-view
Imposible is nothing

Prevent Text Boxes to shrink as big as the text in it - move existing InfoPath form from SharePoint 2007 to SP2013

Hello Together,
we have some simple InfoPath forms in place. With SharePint 2007 they are working well. Now we will move to SharePoint 2013.
It was easy to re-publish them on a SharePoint 2013 Site and to work with, but i have an optical / technical error and i don't find the solution.
We use Text Boxes to collect the data from the user. After the user has filled the form we will submit them via mail.
I will you show you the problem.
on SharePoint 2007 --> it looks okay
on SharePoint 2013 --> not okay - the Text Box is shrinked to the text Size and the design is defect
How can i prevent this?
Thanks in advance
Sebastian
I can provide Screenshots, bit at the moment my account is not verfied...

Can you please share screen shot.
Before try removing the field form View and Add it again - check it
Velu K

SharePoint 2007 (WSS 3.0) migration to SharePoint Foundation 2013

Hi
I have a requirement to migrate a SharePoint 2007 (WSS 3.0) farm to a SharePoint Foundation 2013 farm. The WSS 3.0 farm has SQL Server 2005 Standard running so no restrictions on the size of the content database. The SharePoint Foundation 2010 and 2013 farms
will share the same SQL Server 2012 Standard instance (as I know WSS 3.0 will have to be migrated to 2010 before 2013). I also have two other WSS 3.0 farms (so three WSS 3.0 Farms, lets call these A (250GB), B (90GB) and C (60GB)) that I need to migrate
into WSS 3.0 Farm A before the migration to SP 2010.
My question is, can I migrate a 400GB WSS 3.0 site collection to SP 2010 or will I have to split this into separate site collections? I have read that there is a best practice limit of 100GB per site collection but this does not stop a larger migration from
happening. Obviously over time when the migration has completed to SharePoint Foundation 2013 the single site collection will grow and grow so perhaps now is the right time to split this out into, say, year named site collections, but surely this will incur
an end of year process to create new site collections and a custom dev headache due to different locations to send newly created sites?
Thanks.

The answer is Yes, and you are correct about the best practice of a limit of 100GB,
although, document and record centers (e.g. non collaborative) can go much higher.
http://technet.microsoft.com/en-us/library/cc262787(v=office.15).aspx#ContentDB
That being what it is, your sites will perform better if you find a topology that allows the content databases to be under 100GB each. You can use Move-SPSite to accomplish that feat.
You'll want a separate instance for 2010 and a separate instance for 2013
and finally, put some quota's in place and then governance document\statement that informs users that 100 GB is the max for any given site collection that uses collaborative features (calendars, lists, workflows, etc.)
The simple path is explained on technet, go from 2007 to 2010 (you can inplace upgrade if you want) then go from 2010 to 2013, database detach and attach is only way.
please check the below link that explains more about the migration from share point 2007->2013.
http://technet.microsoft.com/en-us/library/cc262483(v=office.15)
Stacy www.sharepointpapa.com

Javascript to pull a PDF field into the Subject line of email?

I've created a fillable PDF form using Pro X. I'd like to program the Submit button so that once in the email portion, the subject line would automatically pull 3 specific fields from the PDF file.
Example: After hitting "Submit"....once in the email, I'd like the Date, Vendor Name, and PO # from the PDF form to automatically pull into the Subject line.
I have to PDF the complete document and go through the Desktop Email Application on my PC.
Thank you!

Hello Everyone,
I am having the same issue as tlg814 with needing three fields to pull into the subject, and I followed the blue print of the code as well, but I am only getting one field to populate in the subject line. I am using Acrobat XI. Here is my code:
Mouse up> Run a JavaScript
var parts = getField("SR#", "Urgency", "Ship To").value
this.mailDoc({
cTo: "[email protected]",
cCc: "[email protected]",
cSubject: parts,
cMsg: "Please create a Parts Request for the items in this email. Thanks"
Any thoughts as to why it is not pulling all three fields?
Thanks

SharePoint 2007 Designer Concat Three Fields in Subject line

Similar Messages

Maybe you are looking for