Sharepoint 2010 Site Web Analytics and Site Collection Web Analytics reports

Hello,
On our existing MS CMS 2002 site, we use Google Analytics to track file views, e.g., PDF, DOC, etc. This is very important for us as we need to know who is looking at the files we provide, how often, referrer, from what location, etc. Google Analytics
provides this information when we add the proper GA code to every file anchor e.g.,
<A onclick="javascript: pageTracker._trackPageview ('downloads/PDF/filename'); "href="/NR/rdonlyres/B3084801-F110-405E-AF75-7737AB8EC4FD/4542/filename.pdf ">
We are in the process of implementing a new public facing Sharepoint 2010 website. Will native Sharepoint Analytics provide us who/when/from where etc. data on file views as above?
Thanks

Hi ara99,
In SharePoint 2010, we have improved the set of Web Analytics reports that are available out-of-the-box, which will provide insights into
the behavior of users of your SharePoint sites. There are three categories of reports that you will find:
Traffic reports;
Search Reports:
Inventory reports
More information:
http://blogs.msdn.com/b/ecm/archive/2010/03/21/introducing-web-analytics-in-sharepoint-2010.aspx

Similar Messages

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Hi ,
Firstly, I need to verify the followings:
Whether you created a feature called AnalyticsLinks and activatated it at SharePoint 2007 site.
Whether you installed the feature at SharePoint 2010 site.
Please deactivate the feature AnalyticsLinks, then migrate SharePoint 2007 site to SharePoint 2010, compare the result.
Also , please check whether you have installed the feature AnalyticsLinks at your SharePoint 2010 site. If not, please install and activate it, compare the result.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17b17bd3-126c-44d4-bd58-38dd613017a0/fatal-error-could-not-find-feature-reviewpublishingspd1055?forum=sharepointadminprevious
http://mrin17.wordpress.com/2009/09/15/fatalerror-could-not-find-feature-s2siteadmin-while-importing-sites-from-different-server-at-sharepoint/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Site content types and site columns were absent

hi,
i have seved a sub site as a template which includes 20+ doc libs with 20+ site content ctypes which includes 15+ site columns and then i have used this savedsite template in one site collection and implemented my
custom web parts and upload document fun. successfully.
now i have created another new site collection and forgot to create site content types and site columns as we have seen the site columns in the saved site template already.
now i realized that those site content types and site columns were not there but the strange thing is that i am able to uplaod the documents into those document libraries which are not associated with site content types, without any error.
Can I create the same in my new site collection ? since i have already created many many sub sites based on the saved site templates tested the functionality ,i dont wanna delete the template recreate all the sites again in order
to save the time.
Now pls advice:
1) if site columns / site contents were not existing at the site collection level, will this affect my func. in future?
2) is there any automated way fo creating site columns, site content types, associateing these site content types with doc libs programmatically like power shell/ sp object model API.
3) would like to any programmatic way of creating hundreds of sub sites based on the saved site templates in myw eb application/ site collection.

Hi,
We can create site columns, site content types or sub-sites using SharePoint Server Object Model.
The following articles for your reference:
SharePoint 2010: Create Site Columns and Content Types using C#.Net
http://social.technet.microsoft.com/wiki/contents/articles/20267.sharepoint-2010-create-site-columns-and-content-types-using-c-net.aspx
How to: Add a Content Type to a SharePoint List
http://msdn.microsoft.com/en-us/library/office/aa543576(v=office.14).aspx
Create Sites Using Custom Site Templates in SharePoint 2010
http://www.c-sharpcorner.com/UploadFile/63e78b/create-sites-using-custom-site-templates-in-sharepoint-2010/
How to create sub site with custom site template through PowerShell
http://fangdahai.blogspot.com/2012/08/how-to-create-sub-site-with-custom-site.html
Best regards
Dennis Guo
TechNet Community Support

There is an inconsistency between the authentication mode of target web application and the source web application after migrating to claims

I've had my farm upgraded from SP2010 to SP2013 for over 6 months now and all is well, however, I was refreshing my staging environment from production and I noticed that one of the databases still shows these errors when I run test-spcontentdatabase:
Category : Configuration
Error : False
UpgradeBlocking : False
Message : The [SharePoint Web App] web application is configured with claims authentication mode however the content database you are trying to attach is intended to be used against
a windows classic authentication mode.
Remedy : There is an inconsistency between the authentication mode of target web application and the source web application. Ensure that the authentication mode setting in upgraded web application is the
same as what you had in previous SharePoint 2010 web application. Refer to the link "http://go.microsoft.com/fwlink/?LinkId=236865" for more information.
This doesn't make sense considering I converted the production web application to claims during the upgrade and then verified all sites were working with claims logins. I also verified that existing AD user identities were converted to claims by checking out
the database tables. Yet test-spcontentdatabase still thinks there is a mismatch here.
My farm is SP1 and no further CUs. The point of this particular refresh is so I can update to the November CUs in my test farm. Anyone else see this? Seems like it's a bug/safe to ignore because my stuff is working.
Thanks,
Aaron

See:
http://thesharepointfarm.com/2014/11/test-spcontentdatabase-classic-to-claims-conversion/
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Excel web part and choice filter web part session timeout

Hi,
I have set up a excel web part and choice filter web part so I can change the parameters for the excel with the choice filter. I used this link: office.microsoft.com/en-001/sharepoint-server-help/connect-filter-web-parts-to-excel-web-access-HA010105470.aspx
The problem that I have, is that each time I select a parameter through the choice filter web part, I get a session timeout:
How can I prevent the session timeouts? I allready checked the Trusted File Location in the central admin (the location where the Excel is uploaded is not mentioned specifically, but the main domain is, so I guess all domains that built upon the
main domain are also trusted locations?)

Hi vjo,
Please try to increase the Short Session Timeout in the trusted file location, compare the result.
If this issue still exists, please check the ULS log to find whether there is something about this issue.
The path of the log file is: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\14\LOGS.
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Can a Merge Publication have (2 different types of subscribers) a web subscriber and a non-web subscriber ?

Can a Merge Publication have (2 different types of subscribers) a web subscriber and a non-web subscriber ?
Ranga

Yes, in fact some people will apply the snapshot when they are in the office and then change the parameters on their merge agent to do web synchronizations from then on.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

Existing SharePoint 2010 Content Database Attach – No Site Collections

First, let me start off by saying that I have read every single thread I could find on this subject, such as:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0c34ca6f-0db1-4d61-a48c-c4704dd86513/currentsitecount-is-zero-in-upgraded-site
http://social.technet.microsoft.com/Forums/sharepoint/en-US/502459b3-0301-4ac3-bfc4-16ea702bb5bc/empty-site-data-after-mounting-content-database?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/ec472ed5-4cdd-45ca-a327-ccc34c29c0a4/zero-site-collections-when-restoring-sp2010-content-database?forum=sharepointgeneralprevious
http://social.technet.microsoft.com/Forums/en-US/c8df1760-275a-43a4-b3fc-cf257c56d8e2/orphaned-entry-in-config-database
That said, even though my situation is a bit different than those posts, I have tried all the things!
Let me break it down:
Our prod server is a sad Frankenstein upgrade from Project/SharePoint 2003 to 2007 to 2010.
The problem is not on our prod server.
Our test server was a database attach installation. It mostly works.
The problem is, we have this old content database which housed the project sites that were created on 2003, then upgraded to 2007, then upgraded to 2010 – but when it attaches to the test server, it's empty. The "current number of site collections"
in CA shows 0 and the CurrentSiteCount in powershell = 0.
We have to keep these sites and their links for compliance reasons (7 year retention policy!) and we haven’t really cared that they aren’t working on the test server…except that we are going to be upgrading to 2013 this year, and that’s a database attach
no matter what. So I have to solve this now.
I’ve checked the following:
The data is there on the database.
The database name I’m typing is correct.
The version of the db is up to date.
The top level site is set to Exclusion.
Permissions.
Here’s what I’ve tried:
Attaching using powershell
Attaching using Central Admin
Detaching and reattaching
Running psconfig
Resetting IIS
When the database is unattached, I have tried the “Recover data from an unattached content database” function – it recognizes the database (if I type it in wrong, it tells me I don’t have access) but then finds nothing in the site collections.
The prod server is perfectly happy with these sites, and we copied the database from prod after the 2010 upgrade, so I don’t know what the issue is.
I appreciate any thoughts any of you have. I’m stumped!
ElliJ
Project Solutions Specialist
http://projectserverpants.wordpress.com/

Holy lots of errors, batman!!
I think it's safe to say that the 2010 upgrade didn't hit all our sites, based on the errors and this post:
http://social.technet.microsoft.com/Forums/projectserver/en-US/c7b19345-3036-4dc1-a174-026796cdee7c/missing-server-side-dependencies-after-project-server-upgrade-from-2003-to-2010?forum=projserv2010setup
There are serveral missing setup files and one missing assembly:
Category        : MissingSetupFile
Error           : True
UpgradeBlocking : False
Message         : File [1033\PWA\lists\wplib\dwp\Updates.dwp] is referenced [27
                  5] times in the database [STS_FSHAREPTP01_1], but is not inst
                  alled on the current farm. Please install any feature/solutio
                  n which contains this file.
Remedy          : One or more setup files are referenced in the database [STS_F
                  SHAREPTP01_1], but are not installed on the current farm. Ple
                  ase install any feature or solution which contains these file
                  s.
Category        : MissingAssembly
Error           : True
UpgradeBlocking : False
Message         : Assembly [Microsoft.Office.Project.Server.PWA,Version=12.0.0.
                  0,Culture=neutral,PublicKeyToken=71e9bce111e9429c] is referen
                  ced in the database [STS_FSHAREPTP01_1], but is not installed
                   on the current farm. Please install any feature/solution whi
                  ch contains this assembly.
Remedy          : One or more assemblies are referenced in the database [STS_FS
                  HAREPTP01_1], but are not installed on the current farm. Plea
                  se install any feature or solution which contains these assem
                  blies.
I guess the question now is - how do we get it to upgrade ALL of the site collections and sites? I'm actually pretty sure I can figure it out from here, that test was a huge help, thanks!

Web application and site collection not accessibe

I have created a web application and a site collection. But when I tried to access the site by browser on the server the page cannot be displayed or the server cannot be found. What should I configure? Please say by detailed steps.

I created a host header extranet.xxx.xx and alternate access mapping is ok. But still I'm not able to access the site by http://server name:port no. It gives The web page cannot be found or this web page can't be displayed.
Now when I try with Firefox with http://server name:port no, it gives
"Bad request - Invalid hostname
HTTP Error 400. The hostname is invalid."
More: if I go to Alternate Access Mappings > Add Internal URL:s > Save is grayed out.
You have two options,
Option 1 : Accessing the web application without any host header name and with the port no you have created. (ex: (http://server1:5500 )
Option 2. Accessing it with the host header name (ex:http://mywebapp.contoso.com) you have created for which you need to create a DNS and set an AAM accordingly in the corresponding zone.
For the option no 1. you need to have a host header in IIS which would be created by default while you create a web application and it should be like this unless you did nit change it. http (Type)---blank host name--All Unassigned in the IP section---and
the port no in which you have created.
PS : If you have one more IP address in the server, its good to set the same IP address which is set for server for the name resolution to happen properly.
If you have n't specified the hostheader while creating the web application, then you need to add it manually with the existing one which is there for option no 1. It should be added as below. http---Mywebapp.contoso.com--IP address in which you have created
the DNS and Port 80.
If AAM save is grayed out, check it from some other browser. Also Hostname invalid clearly implies that there is some problem with the name resolution. Check whether you could ping the webapplication from the server where you are trying to access it.
Veeramani.S

Network Place to SharePoint 2010 unable to access sub sites with error: "The folder may have been moved or deleted".

I am working on SharePoint 2010 Enterprise and had recently upgraded our site from Sharepoint 3.0 Services to SharePoint 2010 Enterprise. Everything seems to be working fine for the site, but there is one issue. The problem I am running into
is when I create a Network Place, I am able to view the documents and lists of the main page, but if I click on a folder for a sub site, I get the following error:
"Documents in this folder are not available. The folder may have been moved or deleted, or network problems may be preventing a connection to the server. There is a problem with the web server. Please try again later or contact the
server administrator."
If there were a network issue, I would not be able to navigate around on the main page to lists and document libraries. This seems to affect all of the sub sites on my site. Explorer view works if that information is required and I do not get
error messages using Explorer view.
Thanks in advanced for any help on this.
-Thao

Hi pei jingw,
You should be able to log in with your Adobe ID/password in lieu of a serial number. Are you able to do that?
Best,
Sara

SharePoint 2010 Session issue for Internet site

Hi,
We have migrated one application from MS.net to SharePoint 2010. Session is used allover application. The issue is, when we are using this site from Intranet, session is working absolutely fine, but when we use this site over Internet, Session is getting
null frequently for both FBA & windows authentication.
We have enabled session in web.config as below :
<sessionState mode="InProc" timeout="600" cookieless="false" />
& one more point i would like to add is, our internet site is on different port(extended port). We have cross-checked web.config from both port to resolve this issue, but nothing helped us out.
Please help..!!!

Hello,
Just try to enable session state in SP server. You may run below powershell command:
Enable-SPSessionStateService -DatabaseName [-DatabaseServer ] [-DatabaseCredentials ]
Later edit each web app web.config file (from virtual directory) and set the enableSessionState property of the pages element as follows: <pages enableSessionState="true"
http://blogs.msdn.com/b/markarend/archive/2010/05/27/using-session-state-in-sharepoint-2010.aspx
Once you done then see the result
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

SharePoint Foundation 2013 Feature Pack and Site Templates

I have created a site using a site subscription and a SharePoint Foundation 2013 Feature Pack ( used the SP Foundation Feature Pack Script here http://gallery.technet.microsoft.com/office/SharePoint-2013-Foundation-d3d1637f that
was created by Spencer Harbar)
When I go to create a sub-site, there are 3 site templates that are available that strictly speaking should not be for Foundation edition. When I try and create sites using those I get errors because the features needed from them are not part of the subscription.
The site templates available are:
Collaboration > Project Site
Enterprise > Document Center
Enterprise > Records Center
Does any one know why these would be displaying?

Hello, if I remember correctly the issue was that I created the form with InfoPath 2013 and was trying to test using InfoPath 2010. This does not work.
Did you create the form using InfoPath 2013?

SharePoint 2010 - Content Organizer Move and leave a link

Hi everyone,
We have activate Content Organizer on two Site collections, one name FromSC
(From Site Collection) and the other name ToSC (To Site Collection).
We have created a new "Send To Connections" with the Action "Move and leave a link"
The document is moved from the librairy in the site collection "FromSC" to the librairy in the site collection "ToSC" but we don't have any link in the librairy in the site collection "FromSC".
Anyone have the same problem?
Regards,
Social Technet Microsoft.

Hi,
Based on your description, I have done a test in my SharePoint 2010 and I re-appeared your issue.
I have followed the following article to create a new "Send To Connections" with the Action "Move and leave a link".
http://www.boostsolutions.com/blog/how-to-configure-send-to-connections-in-sharepoint-2010/
A link is created when I manually move the document to the Send To Connection.
But if I am using the rule "Content Organizer Rule" the link is not created.
Besides, I have created a new "Send To Connections" with the Action "copy" and I got the same results.
By testing, I came to the conclusion that it is by default that when we use the "Content Organizer Rule" and choose the target location with the screenshot, it just take the connection as a destination path rather than using its action.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Sharepoint 2010 on Windows 2012R2 and claims based authentication

Hello,
We have installed a sharepoint 2010 SP2 CU dec 2014 on a Windows 2012R2 server.
The installation went without problems.
However, we want to use claims based authentication on a certain web app pool.
Therefore some configuration on IIS is required.
The first issue we ran into, is the web application pool uses ASP.NET 2.0, which is the default settings.
However, using this ASP.NET Version 2.0 the feature "Providers" and ".net users" are invisible.
When changing the .net version to 4.0, the features comes back again.
I can fill in the connection strings without problem.
The providers feature however, gives me the following errors:
There is a duplicate .... sections defined.
When googling on this error, it seems that on .net 4.0 these sections are already globbally defined in the machine.config, So i removed these entries in the machine.config
These are the lines that are "double"
<section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false"
allowDefinition="MachineToApplication"/>
<section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="Everywhere"
/>
<section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false" allowDefinition="MachineToApplication"
/>
<section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" requirePermission="false"
allowDefinition="MachineToApplication" />
So after removing these lines, i can get into Providers feature in IIS.
but, when i click on "Add..." i get the following error:
Add Provider
There was an error while performing this operation.
Details:
This method cannot be called during the application's pre-start initialization phase.
OK
I spent to much time already to solve this issue and i hope that someone can give me some advice to address this issue.

The STS web.config:<?xml version="1.0" encoding="utf-8"?>
<configuration>
<system.serviceModel>

<behaviors>
<serviceBehaviors>
<behavior name="SecurityTokenServiceBehavior">

<serviceMetadata httpGetEnabled="true" />

<serviceThrottling maxConcurrentCalls="65536" maxConcurrentSessions="65536" maxConcurrentInstances="65536" />
</behavior>
</serviceBehaviors>
</behaviors>

<services>
<service name="Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract" behaviorConfiguration="SecurityTokenServiceBehavior">

<endpoint address="" binding="customBinding" bindingConfiguration="spStsBinding" contract="Microsoft.IdentityModel.Protocols.WSTrust.IWSTrust13SyncContract" />

<endpoint name="ActAs" address="actas" binding="customBinding" bindingConfiguration="spStsActAsBinding" contract="Microsoft.IdentityModel.Protocols.WSTrust.IWSTrust13SyncContract" />

<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" />
</service>
<service name="Microsoft.SharePoint.Administration.Claims.SPWindowsTokenCacheService">
<endpoint address="" binding="customBinding" bindingConfiguration="SPWindowsTokenCacheServiceHttpsBinding" contract="Microsoft.SharePoint.Administration.Claims.ISPWindowsTokenCacheServiceContract" />
</service>
</services>

<bindings>
<customBinding>
<binding name="spStsBinding">
<binaryMessageEncoding>
<readerQuotas maxStringContentLength="1048576" maxArrayLength="2097152" />
</binaryMessageEncoding>
<httpTransport maxReceivedMessageSize="2162688" authenticationScheme="Negotiate" useDefaultWebProxy="false" />
</binding>
<binding name="spStsActAsBinding">
<security authenticationMode="SspiNegotiatedOverTransport" allowInsecureTransport="true" defaultAlgorithmSuite="Basic256Sha256" messageSecurityVersion="WSSecurity11WSTrust13WSSecureConversation13WSSecurityPolicy12" />
<binaryMessageEncoding>
<readerQuotas maxStringContentLength="1048576" maxArrayLength="2097152" />
</binaryMessageEncoding>
<httpTransport maxReceivedMessageSize="2162688" authenticationScheme="Negotiate" useDefaultWebProxy="false" />
</binding>
<binding name="SPWindowsTokenCacheServiceHttpsBinding">
<security authenticationMode="IssuedTokenOverTransport" />
<textMessageEncoding>
<readerQuotas maxStringContentLength="1048576" maxArrayLength="2097152" />
</textMessageEncoding>
<httpsTransport maxReceivedMessageSize="2162688" authenticationScheme="Anonymous" useDefaultWebProxy="false" />
</binding>
</customBinding>
</bindings>
</system.serviceModel>
<system.webServer>
<security>
<authentication>
<anonymousAuthentication enabled="true" />
<windowsAuthentication enabled="true">
<providers>
<clear />
<add value="Negotiate" />
<add value="NTLM" />
</providers>
</windowsAuthentication>
</authentication>
</security>
<modules>
<add name="WindowsAuthenticationModule" />
</modules>
</system.webServer>
<system.net>
<connectionManagement>
<add address="*" maxconnection="10000" />
</connectionManagement>
</system.net>
<connectionStrings>
<add connectionString="Server=sqldb_qa_sharepoint2010;Database=SG_SHP_Claims_Authentication;Integrated Security=true" name="SHP_Claims_Authentication" />
</connectionStrings>
</configuration>
I have backupped the machine.config and restored it (the file i edited was in the following dir: C:\Windows\Microsoft.NET\Framework\v4.0.30319\Machine.config)

Scrolling issue with Sharepoint 2010 in brower IE9 and Chrome sp.ribbon.js is not loading at first time

The scroll bar does not appear on the loading of the sharepoint site. It appears only after refreshing 2 or 3 refreshes. We have found that SP.Ribbon.js does not load on page load it gets delayed as it appears after the refreshing.
We have tried various CSS work around but could manage to get the scroller in browsers but the ribbon will not still appear. from CSS we are able to bring scroller but its a Page scroller but ribbon wont work, somehow we need to load sp.ribbon.js after
all webpart loads at one server request by the browser.
if any more information required please get back to me.
we tried.
http://kyleschaeffer.com/sharepoint/sharepoint-2010-scrolling/
http://www.greggalipeau.com/2011/01/28/a-better-enhanced-sharepoint-2010-floating-ribbon/
http://www.webpoint0.com/blog/fixed-width-layouts-scrollbar-ribbon-sharepoint-2010/

No answer for this issue?

Using a PDF as a Document Template in SharePoint 2010: "New Document" icon and action

Hi,
I have to create a document template in SharePoint 2010 using a PDF. After much searching I have learned to install Reader on the SharePoint server to bring in AcroPDF.dll
and set the OpenControl for PDFs in DOCICON.xml to be "AdobeAcrobat.OpenDocuments".
After taking these steps I can check PDFs in and out of SharePoint, and edit PDFs as I would edit an MS Office document.
However two problems remain with creating new documents based upon a PDF document template.
1) The PDF icon does not appear in the New Document dropdown. This makes sense since I never referenced a 32x32 icon in the SharePoint config files. Where would I place the icon image file and which configuration file would I edit to use that image file, and how?
The last three document templates are PDFs.
The second problem I face is that when I click one of the document templates above that is a PDF, nothing happens. I have tried this with Acrobat installed on both the client and the server. It would be preferable to insert a copy of the PDF document used as a template without having to use Acrobat at all.
Is there any resolution to either of these problems?

According to what i found the image needs to be 16x16.
See if this works.
Edit the DOCICON.XML file to include the PDF icon
In Windows Explorer, navigate to C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\XML
Edit the DOCICON.XML file (I open it in NotePad, you can also use the built-in XML Editor)
Ignore the section <ByProgID> and scroll down to the <ByExtension> section of the file
Within the <ByExtension> section, insert a <Mapping Key=”pdf” Value=”pdficon_small.gif” /> attribute. The easiest way is to copy an existing one – I usually just copy the line that starts <Mapping Key=”png”… and replace the parameters for Key and Value (see image below for example).
Note: Do not take shortcuts and copy/paste from here. 99% of problems with PDF icons not being displayed are due to errors made in the DOCICON.XML file
Save and close the file
Source:
http://www.sharepointsharon.com/2010/03/sharepoint-2010-and-adobe-pdf/

Sharepoint 2010 Site Web Analytics and Site Collection Web Analytics reports

Similar Messages

Maybe you are looking for