Network Place to SharePoint 2010 unable to access sub sites with error: "The folder may have been moved or deleted".

I am working on SharePoint 2010 Enterprise and had recently upgraded our site from Sharepoint 3.0 Services to SharePoint 2010 Enterprise. Everything seems to be working fine for the site, but there is one issue. The problem I am running into
is when I create a Network Place, I am able to view the documents and lists of the main page, but if I click on a folder for a sub site, I get the following error:
"Documents in this folder are not available. The folder may have been moved or deleted, or network problems may be preventing a connection to the server. There is a problem with the web server. Please try again later or contact the
server administrator."
If there were a network issue, I would not be able to navigate around on the main page to lists and document libraries. This seems to affect all of the sub sites on my site. Explorer view works if that information is required and I do not get
error messages using Explorer view.
Thanks in advanced for any help on this.
-Thao

Hi pei jingw,
You should be able to log in with your Adobe ID/password in lieu of a serial number. Are you able to do that?
Best,
Sara

Similar Messages

Unable to access time machine backup. The folder "Documents" can't be opened because you don't have permission to see its contents.

My MacBook Pro with 750GB storage refuses to startup due to a problem with logic board (unfortunately I'm in Singapore and there is no Apple store here and zero customer support). I'm trying to access some of the files from the time machine back-up using my MacBook Air with 120GB storage, but I'm unable to open the backup. I receive an error message "you don't have permission to see its contents". Unable to access time machine backup. The folder “Documents” can’t be opened because you don’t have permission to see its contents.
I don't really want to migrate the data from the time machine to the MacBook Air as I simply don't have sufficient storage space on the MacBook Air. The iPhoto library which I'm trying to access is 200GB, which is more than the size of the MacBookAir.
Is there any way I can view the photos and documents stored on the time machine backup.
Thank you very much.

When you setup the Mac, you created a Admin user account with say name X
You ran Migration Assistant and it migrated user Y from the Windows machine.
User Y has different permissions than User X.
User X can't normally access User Y's account.
So what you do is log out of User X via the Apple menu and into User Y, this way you have permission to access the files.
If you want to transfer files from User Y to User X account
Transfer files between user accounts on the same machine instructions
Finder > Go menu > Computer
A window appears with your boot drive, double click on it to open
Inside is Users folder, double click to open it
Inside is your User accounts, double click on the one you want to send files too
Double click on the Public folder drop the files into the DropBox folder,
The permissions will change and can be used in the other user account when you log into it and moved to the appropriate folders.
Applications are typically installed and kept in the Applications folder which is a global access folder all users can access to run them from, but not all users can modify unless they are a Admin user.
Windows programs won't run on a Mac, but they can be instaled into a virtual machine program that is running Windows.
Windows in BootCamp or Virtual Machine?

Unable to Access Web Site (with same name) outside of Local Network

Hi everyone,
I have my web site (and some other services) hosted outside of my network by my hosting provider, but handle all other items using OS X Server on my network (i.e. Wiki and so forth).
The problem is now that I am unable to access my website at www.mydomain.com from within the network. I have external DNS set up for www.mydomain.com to point to my website, while mydomain.com points to my OS X Server (static IP address). Internally in OS X Server's DNS settings this used to work when I had www.mydomain.com resolving to the IP address of my web host, in addition to the default domain settings that OS X had set up. For some reason this is no longer working, and I am unable to figure out why.
Using latest version of OS X Server 3.0.2.
Any help is greatly appreciated. Thanks!
Update: this ended up being a redirect issue on the web host. I added another subdomain that was hosted externally, and it worked fine. For some reason my web host is redirecting www.mydomain.com to domain.com.

I am in Texas and cannot get to that site either. Do you know for sure the site is up and working? It could just be down (for days, a site I support was down for almost 4 full days a few weeks ago due to a virus problem).
This may (again, may) be your problem: I see you have a173.48.x.x (you really should x-out the last two octets of your IP address for privacy reasons), I am on a 173.74.x.x address; I know some people have had problems with getting to some sites now that they have a 173.x.x.x address. I think Verizon obtained addresses in that range and some of the addresses apparently previously belonged to spammers or some malicious folks.Some sites (web sites, intermeidate routers, etc.) blocked those addresses, and may not have updated their filters to remove the block on those addresses because they don't know that Verizon now owns them. If this is the problem, eventually those filters will get updated and you will be able to access the site, but this could be a fairly long time.
If you know how to contact that site I suggest you email them about the problem. You can also try turning off your router overnight and when you turn it back on the next day you may find that you have a different address (one that doesn't start with 173) that will allow you to get to the site.
I don't think there is much Verizon can do to help, it is not their site that is blocking your address (at least I don't think it is).
Hope this helps.
Justin
Verizon FiOS TV, Internet, and phone
IMG 1.6.2, Build 08.58
Keller, TX 76248

I have been unable to publish my website due to this message "iweb quit unexpectedly - the problem may have been caused by FTP plug-in" - Iweb seems to register all pages, then crashes before publishing.Tried quite few thread trouble shoots, no luck.Help?

I have mac book pro 10.5 Leopard
Have just started using iweb and have small site of about 5 pages, plus blog. I have yet been able to publish, each time I try iweb crashes and receive following note -
The application iweb quite unexpectedly. The problem may have been caused by the FTPKit Plug-in.
I have tried a few troubleshooting methods recomended on other threads, ie. deleting caches, copying domain and reboots... but no luck.
Any help very much appreciated.

Reinstall iWeb from the source you got it from originallhy. Or, if you're running iWeb 3 download and apply or reapply the iWeb 3.0.4 updater. It included that plugin.
OT

Suddenly unable to access the barclaycard site when i can with other browsers. I have been through the IPV6 and dns Prefetching to no avail

Standard error message comes up ONLY on the below site that Problem Loading Page
The connection has timed out
The server at www.barclaycard.co.uk is taking too long to respond.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.

Hi the-edmeister
I have been through all of the above, and still will not connect to Barclaycard withthe same error message as in above post. What's next, deintall firefox and reinstall? Could it be some problem with VPN software, as interestingly on my works supplied machine, neither IE or Firefox will connect to this site (but all others) when I'm outside the VPN, but when I'm inside, IE5 will connect to all sites including Barclaycrd, but not firefox....could it be a conflict between IE5 and firefox? This is driving me nuts
Thanks in advance for your response

After windows update in sharepoint 2010 farm , administraion service stopped and given error when start

Hi
i have a sharepoint 2010 farm
and it has total 6 servers, and in all servers i did the latest windows update
and after update i found the sharepoint 2010 administraion service was stopped and when i start its given error message
Log Name:      System
Source:        Service Control Manager
Date:          7/12/2014 3:01:15 PM
Event ID:      7000
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SPFAPP01.xyz.gov.local
Description:
The SharePoint 2010 Administration service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
   <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-12T12:01:15.109313700Z" />
    <EventRecordID>81462</EventRecordID>
    <Correlation />
    <Execution ProcessID="576" ThreadID="3372" />
    <Channel>System</Channel>
    <Computer>SPFAPP01.xyz.gov.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">SharePoint 2010 Administration</Data>
    <Data Name="param2">%%1053</Data>
</EventData>
</Event>
adil

Are you able to run the Config Wizard? Are there any helpful messages in the Application Event Log or in Applications and Services Logs -> Microsoft -> SharePoint Products -> Shared -> Operational?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

Hi ,
Firstly, I need to verify the followings:
Whether you created a feature called AnalyticsLinks and activatated it at SharePoint 2007 site.
Whether you installed the feature at SharePoint 2010 site.
Please deactivate the feature AnalyticsLinks, then migrate SharePoint 2007 site to SharePoint 2010, compare the result.
Also , please check whether you have installed the feature AnalyticsLinks at your SharePoint 2010 site. If not, please install and activate it, compare the result.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17b17bd3-126c-44d4-bd58-38dd613017a0/fatal-error-could-not-find-feature-reviewpublishingspd1055?forum=sharepointadminprevious
http://mrin17.wordpress.com/2009/09/15/fatalerror-could-not-find-feature-s2siteadmin-while-importing-sites-from-different-server-at-sharepoint/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

I am unable to access iTunes. Receive error regarding data execution prevention. I've tried unloading/reloading. Suggestions?

I am unable to access iTunes. Receive error regarding data execution prevention. I've changed the Performance Options to exclude DEP for iTunes and I've tried unloading/reloading. Still no success. Suggestions?

Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

SharePoint 2010 Session issue for Internet site

Hi,
We have migrated one application from MS.net to SharePoint 2010. Session is used allover application. The issue is, when we are using this site from Intranet, session is working absolutely fine, but when we use this site over Internet, Session is getting
null frequently for both FBA & windows authentication.
We have enabled session in web.config as below :
<sessionState mode="InProc" timeout="600" cookieless="false" />
& one more point i would like to add is, our internet site is on different port(extended port). We have cross-checked web.config from both port to resolve this issue, but nothing helped us out.
Please help..!!!

Hello,
Just try to enable session state in SP server. You may run below powershell command:
Enable-SPSessionStateService -DatabaseName [-DatabaseServer ] [-DatabaseCredentials ]
Later edit each web app web.config file (from virtual directory) and set the enableSessionState property of the pages element as follows: <pages enableSessionState="true"
http://blogs.msdn.com/b/markarend/archive/2010/05/27/using-session-state-in-sharepoint-2010.aspx
Once you done then see the result
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Unable to access sub account management

When attampting to manage sub accounts that were prevoiusly set up, I see no listing for the accounts.
I know the accounts are set up and working, how do I access them to make changes?
Scott

So, when you into my verizon and under manage sub-accounts, you are not seeing any of your sub-accounts. That is probably because your sub-accounts may have been compromised and possibly got deleted. I know some email accounts have been compromised. Verizon is sending out emails about it.

"The file [name of file] may have been changed by another user since you last saved it." Issue affects both network and local files.

When a certain user saves a file in Excel 2010, she gets a message: "The file <name of file> may have been changed by another user since you last saved it." She can choose to save as another file or overwrite with her changes.
This just started happening a week or so ago. She was concerned that someone else was accessing her files, but we did several tests that opened, made a change and saved in a matter of seconds, and she still gets the message. It happens on
most files, but not all – both network and local.
We already tried the QFE_Saskatchewan registry fix. I also checked the file server for Services for Macintosh.

You may be confused by the error in Excel saying “another user”. Actually Excel cannot tell who (the real human) is editing the file. Based on my research the No.1 possibility of the error is KB2626998.
2626998 Connection to a network document is lost in the 2007 Office system or in Office 2010 after the computer resumes from standby
http://support.microsoft.com/kb/2626998
For Excel 2010, follow these steps:
a. Click Start , click Run , type regedit in the Open box, and then click OK .
b. Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\Options
c. On the Edit menu, point to New , and then click Dword Value .
d. Type NetworkAvailableTimeInSeconds , and then press Enter.
e. Right-click NetworkAvailableTimeInSeconds , and then click Modify .
f. In the Value data box, click Decimal , type a number value, and then click OK .
Note This registry subkey sets the time, in seconds, that Excel waits for the network to resume. For example, if you type 15 for the number value, Excel waits 15 seconds for the network to resume. You might have to do some tests in your own environment to
determine an appropriate value. You may have to try multiple numbers.
g. Locate and then select the following registry subkey.
HKEY_CURRENT_USER\Software\Microsoft\office\14.0\common\Internet
h. Repeat step 2C through step 2F again. Reuse the same value that you used previously.
i. Exit Registry Editor.
Feel free to post back. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

Assigning View permission to all the users that have been selected in contact selector - SP 2010, InfoPath 2010

I have a SharePoint InfoPath 2010 browser form with item level security. Only submitter
and approvers has access to the form. This form contains a people picker that is populated with the names of attendees
for the meeting they attended (which
I am able to store in Field2 below). I want to allow attendees to be able to view (grant view permission) the InfoPath form. Field 2 has the users in form of domain\user1;domain\user2; etc. Following the below step, I am getting error when I ADD or REPLACE
permission on current item. How do I go about assigning view permission to all the users that have been selected in contact selector?
Jitu

Hi ,
i understand that the text box and the people picker hold multiple user names and you want to grant user permission based on the user in the text box.
I have a test based on your description,the results are: When there are multiple users in the text box, the workflow will throw an error'Error Occurred'.It is the same with the people picker column.
You need to limit the peopel picker to only allow to select one user,in this way the text box will only hold one user.Then you can use the people picker or the text box to grant user permission.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

SharePoint designer 2013 crashes most of the time, when opening sites. Error: The server could not complete the request.

Hi,
I have few sharepoint 2013 site's, which I am trying to open in sharepoint designer 2013.
After adding the site name in open site and clicking ok, the sharepoint designer crashes. At times the sites open, but 90% of the time, the sharepoint 2013 designer has crashed. I get the message "The server could not complete the request. For
more specific information, click on the Details button".
When clicking on "Details" button, there is a empty box. The error message never gets closed and have to kill the process.
I have tried doing "IISreset" multiple times, which has not helped.
Has anybody faced this issue? How to fix this?
Thanks

Hi Venkatzeus,
Firstly, I need to verify the followings:
1.Whether this issue occurred on a specify SharePoint 2013 site.
2.Whether you have extended the problematic site.
Make sure that your user is a site administrator. If you have extended the problematic site, please add it to AAM.
There are other probable causes for this issue:
1.Anonymous authentication is not configured for the problematic web application in IIS
Fix: Enable Anonymous authentication in IIS
2.Server is running out of memory
Fix: Free up memory on the server
Here are some similar articles for you to take a look at :
http://forums.bitwiseglobal.com/forum/sharepoint/the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-button/
http://tjendarta.wordpress.com/2013/05/24/fix-sharepoint-designer-2013-the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-below/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/11854880-e85d-4e4c-ae9c-0ffd640d33d8/error-the-server-could-not-complete-your-request-while-opening-site-in-sharepoint-designer?forum=sharepointadminprevious
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f93e155e-2c65-4744-a1d0-96cdbd50014d/sharepoint-designer-error-the-server-could-not-complete-your-request
I hope this helps.
Thanks,
Wendy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

What does it mean if I get blank text messages from someone but they are not coming from number they appear and disappear they are not coming over the network also emails have been moved around, has my phone been hacked?

I Have been getting blank texts from a number, but the person who owns the niumber is not sending them, they appear then disappear, they are not coming over the network, they come even though number has been black listed, also emails have been moved, I believe by someone who is cyberstalking me but don't know how to prove it, what can I do ?

Hi,
When a Mac is "registered" for iMessages account with an Apple ID the Serial Number of the Mac is used to create an Auth Token as it is called for the Messages app that allows that Mac to work.
I would guess a similar process of linking the Number of the iPhone to a Hardware fact about the device is also in place.
I would contact Apple Support and check with them. (you might need to speak to a Level 2 person as Level 1 people are script led and try to fit everything into Software or Hardware categories where as sorting and Apple ID (which the Number is in this case) is normally Free).
I did find this iOS: Troubleshooting Messages - Apple Support
It starts off about sorting SMS that is not working.
This one has a bit on Unlinking an iPhone Number (with or without the iPhone) iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
7:55 pm Tuesday; January 6, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I gave my old MacBook Pro away and no longer have access to it. I didn't think to deauthorize it first. I DO NOT want it to have access to all music in my iCloud or any music that may have been downloaded sinceI gave away the computer. It now belongs to m

I gave my old MacBook Pro away and no longer have access to it. I didn't think to deauthorize it first. I DO NOT want it to have access to all music in my iCloud or any music that may have been downloaded sinceI gave away the computer. It now belongs to my teenage daughter,who has since been in my WI-FI area and knows that code. I had EVERYTHING removed from the computer before I gave it to her (long story), but since I hadn't deauthorized the Mac,I'm assuming even without the itunes password the iCloud material would had loaded onto her computer.My iCloud had somehow included personal voice mails under Unknown Artist that I did not want on there or shared. How can I deauthorize the Mac Laptop without having the machine available to do it on? Change the iTunes/iCloud password? I should now have my desktop computer, new PC (Aspire) laptop,Ipod Touch, and if possible my Evo 3D as well as my boyfriend's Samsung smartphone being able to access the iCloud account/library--whatever it is called. HELP

Thanks, I appreciate the help. I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

Network Place to SharePoint 2010 unable to access sub sites with error: "The folder may have been moved or deleted".

Similar Messages

Maybe you are looking for