SharePoint and Nintex workflow - Error 0x80070005 (E_ACCESSDENIED)

Dear all,
1 Month ago, we started to get strange errors with sharepoint and nintex.
After a workflow has been initiated and some days after if someone try to approve a task (not the case for all user) the workflow is stucking in status 15 with the error:
System.Workflow.Runtime Error: 1 : Subscription handler of Activity review17bb1fc639b94ba7abcebcb914b1b119.replicatorActivity1 threw System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
   at Microsoft.SharePoint.Library.SPRequest.OpenWeb(String bstrUrl, String& pbstrServerRelativeUrl, String& pbstrTitle, String& pbstrDescription, String& pbstrTitleResourceId, String& pbstrDescriptionResourceId, Guid& pguidID,
String& pbstrRequestAccessEmail, UInt32& pwebVersion, Guid& pguidScopeId, UInt32& pnAuthorID, UInt32& pnLanguage, UInt32& pnLocale, UInt16& pnTimeZone, Boolean& bTime24, Int16& pnCollation, UInt32& pnCollationLCID, Int16&
pnCalendarType, Int16& pnAdjustHijriDays, Int16& pnAltCalendarType, Boolean& pbShowWeeks, Int16& pnFirstWeekOfYear, UInt32& pnFirstDayOfWeek, Int16& pnWorkDays, Int16& pnWorkDayStartHour, Int16& pnWorkDayEndHour, Int16&
pnMeetingCount, Int32& plFlags, Boolean& bConnectedToPortal, String& pbstrPortalUrl, String& pbstrPortalName, Int32& plWebTemplateId, Int16& pnProvisionConfig, String& pbstrDefaultTheme, String& pbstrDefaultThemeCSSUrl, String&
pbstrThemedCssFolderUrl, String& pbstrAlternateCSSUrl, String& pbstrCustomizedCssFileList, String& pbstrCustomJSUrl, String& pbstrAlternateHeaderUrl, String& pbstrMasterUrl, String& pbstrCustomMasterUrl, String& pbstrSiteLogoUrl,
String& pbstrSiteLogoDescription, Object& pvarUser, Boolean& pvarIsAuditor, UInt64& ppermMask, Boolean& bUserIsSiteAdmin, Boolean& bHasUniquePerm, Guid& pguidUserInfoListID, Guid& pguidUniqueNavParent, Int32& plSiteFlags,
DateTime& pdtLastContentChange, DateTime& pdtLastSecurityChange, String& pbstrWelcomePage, Boolean& pbOverwriteMUICultures, Boolean& pbMUIEnabled, String& pbstrAlternateMUICultures, Int32& puiVersion, Int16& pnClientTag)
   at Microsoft.SharePoint.SPWeb.InitWeb()
   at Microsoft.SharePoint.SPWeb.get_Title()
   at Microsoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint)
   at Microsoft.SharePoint.Workflow.SPWinOEWSSService.GetWebForWorkflow(SPWorkflow wf, SPWorkflowUserContext runAsUser)
   at Microsoft.SharePoint.Workflow.SPWinOEWSSService.get_Web()
   at Microsoft.SharePoint.WorkflowActions.WorkflowContext.get_Web()
   at Nintex.Workflow.Activities.ReviewActivityInternal2.ChildCompleted(Object sender, ReplicatorChildEventArgs e)
   at System.Workflow.ComponentModel.Activity.RaiseGenericEvent[T](DependencyProperty dependencyEvent, Object sender, T e)
   at System.Workflow.Activities.ReplicatorActivity.HandleStatusChange(ActivityExecutionContext executionContext, ActivityExecutionStatusChangedEventArgs e, ReplicatorSubscriber subscriber)
   at System.Workflow.ComponentModel.ActivityExecutorDelegateInfo`1.ActivityExecutorDelegateOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
It's really look like the following KB (http://support.microsoft.com/en-us/kb/2843542) but workaround doesn't work.
Users and SharePoint are in the same domain but user can contains some groups from another domain (trusted), and we use Claims. 3 new domain controller has been create at the same day than errors appears...
Any idea how to resolve this issue?
Thank in advance.

Hi ,
Here is a similar case ,you can have a look at this .
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) -Accessing the sharepoint site:
http://social.msdn.microsoft.com/Forums/en-NZ/sharepointworkflow/thread/5eab2116-7d7c-4bf3-bfa1-48bd8992dded
Thanks,
Entan Ming

Similar Messages

User Group is not receiving email Sharepoint 2013 & Nintex workflow

Hi I created circular workflow using nintex and sharepoint 2013 , now problem occur that User group did not receive email notification through web portal , sending individual email address working fine but user group is not receiving
any email, not a single group is working now , to clear we used same workflow since last two years and all group received email earlier but now we are facing this issue since last 3 weeks. to resolve this we create new test groups and test but enable
to send.
looking for support to resolve this issue
Regards

This actually sounds like a problem that should be discussed on the Nintex forums, can you try over there?
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Sharepoint and SSRS integration Error Requested registry access is not allowed.

I have integrated SSRS with sharepoint foundation 2010, it was running fine but suddenly its starts giving me error as -
"An unexpected error occurred while connecting to the report server. Verify that the Reporting Services Service Application mapped to this web application is available OR the report server is available
and configured for SharePoint Integrated mode. --> The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted content. --->
Microsoft.ReportingServices.Library.ReportServerDisabledException: The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database. You must either restore a backup key or delete all encrypted
content. ---> System.Security.SecurityException: Requested registry access is not allowed."
Now i am not able to read reports or cant access all database options in sharepoint,it says
registry access is not allowed
I tried to reset encryption key and allowed all access to registry keys buts its giving same error .
Please suggest me what should i do now, i stuck here...

Hi Bhagyashri,
From your description, there have two questions in the environment:
"Requested registry access is not allowed" while access SharePoint sites
and "The report server cannot decrypt the symmetric key that is used to access sensitive or encrypted data in a report server database" while viewing reports
For the first issue, the cause is the SharePoint web service account can't access some registry keys.
For the second issue, the cause is that the report database was restored from another server, and the encryption key was not restored correctly.
To fix the issue, please:
Follow "solutions" in this article
http://blogs.technet.com/b/spsforum/archive/2011/11/02/quick-solution-5-requested-registry-access-is-not-allowed.aspx to fix "Requested registry access is not allowed"
Restore the encryption key again, or please delete the key and then reset every credential setting in SSRS data source connection
Thanks,
Jinchun Chen
Jinchun Chen(JC)
TechNet Community Support

Sharepoint Designer 2010 Workflows Struck in "starting" status after Sharepoint 2010 SP2 upgrade(KB2687453 - June 2013)

We have SPD workflows and Nintex workflows which are configured to start automatically on a Document Library which have content type. After we have been installed KB2687453
(sp2) , all the workfows running on documnet library with content type got strucked and always saying" starting". Please help us.,... highly apprciated as it's urgnet. Thanks in advance.

Hi nart ,
It is a known issue. Please install the June 2013 CU to solve the problem.
June 2013 CU:
http://blogs.technet.com/b/stefan_gossner/archive/2013/06/12/june-2013-cu-for-sharepoint-2010-has-been-released.aspx
For more information, you can refer to the thread:
http://blogs.msdn.com/b/chaun/archive/2013/05/16/if-your-sp2010-workflows-are-stuck-in-the-starting-state.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/5a6e6e83-b59f-4099-a86f-a07723ff2b98/workflow-stuck-in-starting-state-after-applying-sharepoint-2010-cu-december-2012?forum=sharepointadminprevious
Best Regards,
Eric
Eric Tao
TechNet Community Support

Sharepoint programmaticaly add list item under current user - 0x80070005 (E_ACCESSDENIED))

Please help me.
In our company, we developed an application under the Apple device to work with the company's internal services , including it in this application it is possible to send messages to the corporate blog portal, which is deployed on Sharepoint 2013 .
The application architecture is as follows:
Server on which you installed Sharepoint 2013 is called "SPS01", on the same server is deployed on IIS web application called "WS",
application "WS" taken in a separate application pool from Sharepoint 2013 .
All Apple client devices communicate with Sharepoint 2013 through the web application "WS". For us it is important that when applying for Sharepoint 2013 with mobile
devices, Apple remained the security context of the authenticated user, as access to documents stored in Sharepoint 2013 demarcated .
For what would be maintained security context authenticated users , we applied techniques such as impersonation and kerberos .
Request goes like this:
Apple client connects to the Web application "WS", on the "WS" configured
to connect to Kerberos enabled and impersonation . (Apple iOS 7 support kerberos ) , then all customer interaction with Sharepoint 2013 going through "WS". Kerberos
we use that to get rid of the problem of "double hopes" that occur when a web application "WS"
refers to the other network resources that are beyond the server "SPS01".
Example:
Web application "WS", which is on the server "SPS01", refers to a
file server «FS01», to get a list of documents from the usual file balls through kerberos and impersonation request comes on «FS01»
from the user who is authenticated by web application «WS».
But there was a problem:
If the user enters the Sharepoint 2013 through the browser on your computer, it can successfully keep there blog post .
If the user is drawn to Sharepoint 2013 from a mobile device Apple, and tries to leave a message in the blog , the error appears : Access Denied. Exception: Access is denied.
(Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Empirically by the following was revealed: I tried to give you a right to - it did not help:
Administrator farm
SQL database config and content - owner
Administrator of User Profile Services
Local Administrator
BUT!
When deploying Sharepoint 2013 group was created security domain - "domain \ farm_administrators" - which is in the local group Sharepoint 2013 - "Farm
Administrators" If the user is included in the domain security group - "domain \ farm_administrators", then the user can successfully keep a blog
post from a mobile device Apple.
I want to note that this happens only through security group AD «domain \ farm_administrators»
The question is, how can you determine what rights the special security group "domain \ farm_administrators" in Sharepoint 2013 , whereby the participants can successfully
send messages to the blog with Apple mobile devices via the web application "WS".
We also found a workaround , but it will not work as we would like.
RunWithElevatedPrivileges
http://msdn.microsoft.com/en-us/library/bb466220.aspx
We can execute a part of the Web application "WS" with the highest privileges. In this case, the user was able to successfully send a message to your blog from your
mobile device Apple.
But when the code runs with the highest privileges - lost the security context of the authenticated user.
In the author is shown as "System Account"
public static XmlDocument addBlogMessage(string projectID, string text)
XmlDocument response = new XmlDocument();
string result = string.Empty;
string webUrl = SPUrlUtility.CombineUrl(Constants.SITE_URL, projectID);
using (SPSite site = new SPSite(webUrl))
using (SPWeb web = site.OpenWeb())
SPList blogMessagesList = web.GetList(SPUrlUtility.CombineUrl(webUrl, Constants.BLOG_MESSAGES_LIST_URL));
SPListItem newBlogMessage = SPUtility.CreateNewDiscussion(blogMessagesList, "Сообщение");
newBlogMessage[SPBuiltInFieldId.Body] = text;
web.AllowUnsafeUpdates = true;
newBlogMessage.Update();
web.AllowUnsafeUpdates = false;
result = "<response><userResult><code>Success</code><messageID>" + newBlogMessage["ID"].ToString() + "</messageID></userResult></response>";
response.Load(new System.IO.StringReader(result));
return response;

Yes I make sure that the assigned field is filled as the workflow will not work unless that field is filled with a valid username.
I am an administrator on this SharePoint site and I am using several people to email to that are not admins on the same site.
The issue seems to lie in the Workflow itself. In the one step that I have "Send an email" you fill out what should go in the To: field in the email. That is where it should say "Current Item:Assigned To" according to all the documentation I
have read and what mine will only enter in the To: field is "Assigned To" only it is missing the key first part of where to look. Even though when I go through the steps I have indicated that it the data should be found in the Current Item from
the field of Assigned To and to return the information of email address, which is well with in the realm of this Action in Workflow.
I have been able to accomplish this in another workflow that is not meant to be Reusable and is tied to one list only. This seems to only be an issue when trying to do this in the Reusable Workflow creation and execution and when I use the Association
Columns.
Any further ideas or suggestions? Any would be appreciated.
Regards,
Lara K.

STSADM Restore error : Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))

Hi all,
I've been struggling figuring out what permission I need to make this restore work. I've successfully restored site collection on the same web app with the following restore command from the same DAT file before.
stsadm -o restore -url
http://siteurl -filename
\\UNCpath –overwrite\filename.dat
Log file error:
stsadm: Running restore
Initializing the configuration database connection
Starting restore of site collection: 'http://sitename/', requested by: domain\user, source: \\UNCpath\filename.dat
Deleting the site at http://sitename and not deleting AD accounts.
Unknown SPRequest error occurred. More information: 0x80070005
stsadm: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) Callstack:
at Microsoft.SharePoint.SPGlobal.HandleUnauthorizedAccessException(UnauthorizedAccessException ex)
at Microsoft.SharePoint.Library.SPRequest.DeleteSite(String bstrUrl, Boolean bDeleteADAccounts)
at Microsoft.SharePoint.SPSite.Delete(Boolean bDeleteADAccounts)
at Microsoft.SharePoint.SPSite.Delete()
at Microsoft.SharePoint.Administration.SPSiteCollection.Restore(String strSiteUrl, String strFilename, Boolean bOverwrite, Boolean hostHeaderAsSiteName)
at Microsoft.SharePoint.StsAdmin.SPAdminRestore.RunSiteCollectionRestore(StringDictionary keyValues)
at Microsoft.SharePoint.StsAdmin.SPAdminRestore.Run(StringDictionary keyValues)
at Microsoft.SharePoint.StsAdmin.SPStsAdmin....
...RunOperation(SPGlobalAdmin globalAdmin, String strOperation, StringDictionary keyValues, SPParamCollection pars)
Now terminating ULS (STSADM.EXE, Microsoft.Office.Server.Native.dll)
I've made sure I have rights:
1. Either primary/ secondary site collection administrator on the associated web app
2. Made myself owner on the related dbs
3. I'm part of the local admin group on the server running CA and DB.
I know I may have given too much privilege - but I'm sick of seeing this access denied error. As far as I'm concerned permission-wise nothing has been changed from my last successful restore except the fact that I'm overwriting the site collection this time.
I also tried with a fresh DAT file to restore with no luck.
If someone can give me some other thoughts I would very much appreciate that.
Many thanks in advance -
Blue Sky

Thanks for your reply...
Now we are trying to restore the minsite first ...
Only my content database is at the server2 because of the disk space problem...
Other data bases are at the server1(original) where the website host ...
now, we run the stsadm restore for minisite
at that time error occur,
No content databases are available for this operation. Create a content database, and then try the operation again. To create a content database, click "Content databases" on the Application Management page, select the Web application to use, and then click
"Add a content database". Callstack:    at Microsoft.SharePoint.Administration.SPContentDatabaseCollection.FindBestContentDatabaseForSiteCreation(Guid siteIdToAvoid, Guid webIdToAvoid)     at Microsoft.SharePoint.Administration.SPSiteCollection.Restore(String
strSiteUrl, String strFilename, Boolean bOverwrite, Boolean hostHeaderAsSiteName)     at Microsoft.SharePoint.StsAdmin.SPAdminRestore.RunSiteCollectionRestore(StringDictionary keyValues)     at Microsoft.SharePoint.StsAdmin.SPAdminRestore.Run(StringDictionary
keyValues)
we set
Central Administration >
Operations >
Default Database Server  to server1 (original)
Central Administration >
Application Management >
Content Databases   to server2\WSS_Content
can we separte the servers like that ??
Thanks ...
M

Post migration Nintex workflow isse (sharepoint 2007 to Sharepoint 2010)

SharePoint2010
Conversation Options
SG
SARAVANAN GAJENDRAN
SARAVANAN GAJENDRAN
To
SharePoint2010 Hi ,
I have migrated Nintex workflow from shrepoint 2007 to sharepoint 2010 after migration one of the workflow is not working .
I am getting the below error .please advise on this .
Tried to export the perticular workflow from sharepoint 2007 and imported in sharepoint 2010 .
Workflow Messages
Time Event Message Outcome
3/2/2015 7:33 AM Workflow Comment Document Creation (v1.60)
3/2/2015 7:33 AM Workflow Comment Error checking in item. The workflow failed because the action requires the document to be checked out. Error
3/2/2015 7:33 AM Error An error has occurred in Document Creation 1.
Please advise on this
sarav

Hi Sarav,
From the error message, it seems that it needs to check out the document first to make the workflow to be executed.
I recommend to check if “Require documents to be checked out before they can be edited” is set to Yes in the Versioning settings of the library where the workflow associated.
If yes, please set it to No and then run the workflow to see if the issue still occurs.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Error While calling getListItem Webservice : Server was unable to process request. --- Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))

Hi All,
we are calling sharepoint webservice from our web application but we are getting below error while calling webservice.
Server was unable to process request. ---> Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Our code is as below.
We used below 2 options but we got same error for both scenario,
1)
            ListService.Lists objLists = new ListService.Lists();
            NetworkCredential objNetworkCredential = new NetworkCredential("username", "password");
            objLists.Credentials = objNetworkCredential;
            System.Xml.XmlNode objXmlNode = objLists.GetListItems("Tasks", null, null, null, null, null, null);
2)         ListService.Lists objLists = new ListService.Lists();
            objLists.Proxy = new WebProxy("proxyaddress",true);
            NetworkCredential objNetworkCredential = new NetworkCredential("username", "password");
            objLists.Credentials = objNetworkCredential;
            System.Xml.XmlNode objXmlNode = objLists.GetListItems("Tasks", null, null, null, null, null, null);
Please help me what is the problem while calling this service.
Thanks in advance.
Regards,
Kaivan Shah

Hi ,
Here is a similar case ,you can have a look at this .
Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) -Accessing the sharepoint site:
http://social.msdn.microsoft.com/Forums/en-NZ/sharepointworkflow/thread/5eab2116-7d7c-4bf3-bfa1-48bd8992dded
Thanks,
Entan Ming

Something went wrong. To try again, reload the page and then start the workflow, error on starting a workflow

i have already create a custom workflow with sharepoint designer and checked for error and it seem fine. i published it on my document library so apprear the first issue : the column that contain the name of my workflow apprear and the link to start my workflow(contain
the name of my first stap) doesn't appear. the second problem is that when i tried to start the workflow manually on a specific document i get an alert : Something went wrong. To try again, reload the
page and then start the workflow
i tried : -restart service bus message broker -restart service bus gateway -recycle workflowMgntpool -flushed the dsn resolver cache and the problem still occure
on uls log viewer it seems to be an error on w3wp.exe process
the workflow history is empty

Hi Mokhtar,
For your first issue, when you publish a workflow to your document library, only after you start the workflow, then the link to go on the workflow(contain the name of the workflow stage) will appear.
For your second issue, my understanding is that you got an error when you manually start a SharePoint Designer 2013 Workflow.
Please go to Administrative Tools->Services, make sure the following services are started.
Workflow Manager Backend
Service Bus Message Broker
Service Bus Gateway
Windows Fabric Host Service
Here are similar posts for you as a reference:
https://social.msdn.microsoft.com/Forums/office/en-US/12f8ae26-6889-4227-a3fc-dd29a38230a6/something-went-wrong-to-try-again-reload-the-page-and-then-start-the-workflow?forum=sharepointcustomization
http://community.office365.com/en-us/f/154/t/277480.aspx
If the issue still exists, please check Event Viewer to check more information about this issue.
http://msdn.microsoft.com/en-us/library/jj193526(v=azure.10).aspx
I hope this helps.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Nintex Workflow and Access Control

Hello, can anybody help with getting owner permissions on Nintex workflows in Sharepoint 2010 with Powershell.
I also want to ask your opinion about Access control in Sharepoint 2010. Should all Access Control like AD, Sharepoint, Titus be in the hands of Administrator or some of it like Titus be in the hand of the Developers.
Best Regards Olafur_s
Icelandic DBA admin

Hello
Hemendra,<o:p></o:p>
Thank you
for your answer. I have developers that create sites and lists and they are all Site Collection admin. The problem is that they can go everywhere they want and look into all kinds of sensitive information and do all that they want to do. So basically they
are running the system. <o:p></o:p>
I am new to
Sharepoint as an admin but I have experience in other system like AD, Exchange, SQL. The evolution of this Sharepoint system here brought it to the point that the developers have too much admin rights and the system is not working well. I am trying to
find the fine line between the Administration part, my work, and the developers part and not steeping on the developers toe's.
Best regards Olafur_s<o:p></o:p>
Icelandic DBA admin

Multiple errors from MsiInstaller with event id 1015 and text "Failed to connect to server. Error: 0x80070005"

Hi,
Every night I get a lot of warnings in the event log from MsiInstaller with event ID 1015 and text "Failed to connect to server. Error: 0x80070005". They are always followed by a new event 1035. Example:
Event 1015, MsiInstaller (Warning)
Failed to connect to server. Error: 0x80070005
Event 1035, MsiInstaller (Information)
Windows Installer reconfigured the product. Product Name: Microsoft Excel Mobile Viewer Components. Product Version: 14.0.4763.1000. Product Language: 0. Manufacturer: Microsoft Corporation. Reconfiguration success or error status: 0.
I probably get around 50 of these each night, and the 1035 events are all related to various SharePoint components. The user in all cases is the sharepoint farm account.
I use SharePoint 2010 enterprise in a farm install on one virtual server. I have a private domain, and the database is on a separate server.
Does anyone have any idea why this happens? Other than the error in the event log I cannot see any issues with my installation. I have searched for this error and seen it related to user profile synchronisation, but profile sync is working fine for me. I
installed using the Technet guide and the user profile sync guide at
http://www.harbar.net/articles/sp2010ups.aspx
Thanks,
Mikael

Hey Trevor. Thanks. I wasn't sure which method it was failing on although I understood it was the Windows Installer Service that was getting called by the job. There are three things that are still interesting to me though:
The job succeeds anyway. How? Does it just continue to run the rest of its checks but fails on this one? If it doesn't fail on this one, why not? If it does fail here, but then continues, should we be concerned about the quality of the data in Manage Patch
Status?
Or... does it somehow succeed once it uses the DCOM rights which appear to clear the 10016 errors? What I've never been able to reconcile with these warnings is that we've granted DCOM rights to launch and activate the Windows Installer Service and
that definitely seems to make a difference to success or failure of the job - so why doesn't it clear these warnings?
Why does granting the file system permissions clear the FIM version of this job's warnings, but not for the Product Version Job? This is particularly vexing since granting the DCOM rights appears to resolve the 10016 errors in exactly the same manner for
both jobs.
All of this has led me to believe that there were missing permissions somewhere, probably on the file system, but I just haven't had any luck pinning that down. One reason why I continued to pursue a solution to this is that the job doesn't actually try
to install anything, it's just trying to use the Windows Installer Service to query the installed version, and the DCOM rights should be sufficient to invoke the service. But getting much further than this has proven pretty difficult since I'm not a dev and
I've kind of pushed my limited reflection skills and understanding of the Windows Installer Service to the limit. If anyone can chip in and make some progress from this point, it'd be great to join forces!

User profile sync Sharepoint 2010 photos thumbnail with AD and Lync 2010 - error on Full Synchronization- get events 8311, 6110, 6803 FIMSynchronization Service

User profile sync Sharepoint 2010 photos thumbnail with AD and Lync 2010 - error on Full Synchronization- get events 8311, 6110, 6803 FIMSynchronization Service
We're trying to set up sync between Sharepoint and AD so photos are displayed in Lync.
The certificate referenced in 8311 is not the sharepoint root cert, its the UCC cert with our FQDN of the site. sharepoint.domain.com
Is this causing the problem with the sync and holding up the photos?
I have tried several proposed fixes, it hasn't helped.
tried this as well:
http://blogs.technet.com/b/praveenh/archive/2011/05/11/event-id-8311-certificate-validation-errors-in-mss-2010.aspx
Josh

Try this fix and see if its sync the photos:
http://blogs.technet.com/b/steve_chen/archive/2010/09/20/user-profile-sync-sharepoint-2010.aspx#Profile Picture Property
http://blogs.technet.com/b/steve_chen/archive/2010/09/20/user-profile-sync-sharepoint-2010.aspx#SyncPicAD2SPS
Update-SPProfilePhotoStore -CreateThumbnailsForImportedPhotos 1 -MySiteHostLocation <mySiteHostURL>
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to Loop through another list and update a column with SharePoint Designer 2013 Workflow

Hi,
I am trying to get my head around the new 2013 Workflow Engine and SharePoint Designer 2013 Workflow Text-Based Designer.
I have two lists.
List A has 2 columns: Title, Completed (Yes/No)
List B has 3 columns: Title, LookupListATitle, Completed (Yes/No)
All the 2013 Workflow components have been installed and configured and I am selecting the 2013 Workflow option in SPD
I am trying to set off a 2013 Workflow when an item in List A is edited to Loop through List B and select items where the LookupListATitle column's value is equal to the Title value of the current item, and set the value of the Completed column for those
items in ListB to "Yes".
I have the Workflow configured like this:
Stage: Stage 1
IF Current Item:Completed equals Yes
Loop: 1
The contents of this loop will run repeatedly while: ListB:LookupListATitle equals Current Item: Title
Update item in ListB.
(The dialog options for the update item action as follows:
List: ListB
Field: Completed, Value: Yes
In the Find the List Item section
Field: LookupListATitle
Value: Current Item: Title)
Transition to stage
Go to End of Workflow
When I update an item in ListA and set its Completed column to Yes, I would expect the Workflow to find all the items in List B where the Lookup column is equal to ListA's Title (there are 2) and update their Completed column to Yes. But it doesn't work.
When I look at the Workflow Status it says the Internal Status is "Canceled" and the information pop up has the following alien language (and may be truncated):
RequestorId: 95f03b62-8956-ac14-c5cf-dc98c89c589c. Details: System.ArgumentException: Invalid JSON primitive: Item001. Parameter name: value at Microsoft.Workflow.Common.Json.JXmlToJsonValueConverter.ConvertStringToJsonNumber(String value) at Microsoft.Workflow.Common.Json.JXmlToJsonValueConverter.ReadPrimitive(String
type, XmlDictionaryReader jsonReader) at Microsoft.Workflow.Common.Json.JXmlToJsonValueConverter.JXMLToJsonValue(XmlDictionaryReader jsonReader) at Microsoft.Workflow.Common.Json.JXmlToJsonValueConverter.JXMLToJsonValue(Stream jsonStream, Byte[] jsonBytes)
at Microsoft.Activities.DynamicValue.ParseJson(String json) at System.Activities.CodeActivity`1.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
executor, BookmarkManager bookmarkManager, Location resultLocation)
Unfortunately I don't have access to the server, logs etc.
I would love to find some tutorials, or any books on SharePoint Designer 2013 in general and Workflows in particular but my searches haven't turned up much so far apart from a pre-release Beginning SharePoint Workflows which is in its very early stages and
not much help yet.
Can anyone give me some guidance on how to set up While Loops to iterate through a related list using SharePoint Designer 2013?
Mark

Hi,
I understand that you wanted to update the items in the other list (Participants) where the Course equals the Current Item.
You need to use “Call HTTP Web Service" action and “Build Dictionary" action to get the Maxid and then loop Participants to update the items.
You can follow the steps as below to achieve what you want:
Create a custom list named Courses, add columns: Title(Single line of text), Course ID(Single line of text), Course Finalised (Yes/No).
Create a custom list named Participants, add columns: Title(Single line of text), Course(Lookup), CourseFinalised (Yes/No).
Create workflow associated to Courses, start the workflow automatically when an item is created or changed.
Add conditions and actions:
The HTTP URL is set to
https://sitename/_api/web/lists/GetByTitle('listname')/items?$orderby=Id%20desc and the HTTP method is set to “GET”. Then the list will be order by Id and desc.
Then if Course Finalised is equal to Yes, the CourseFinalised of the associated items in Participants will be updated to Yes.
More information:
http://sergeluca.wordpress.com/2013/04/09/calling-the-sharepoint-2013-rest-api-from-a-sharepoint-designer-workflow/
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Update Column value after current item is Approved and then publish major version using Sharepoint 2013 designer workflow

Hi,
We have a requirement to update a column value once the item has been approved.
Following settings have been made in the publishing articles list:
Require content approval for submitted items : yes
Create major and minor (draft) versions
Who should see draft items in this document library? :Only users who can edit items
Require documents to be checked out before they can be edited? : yes
I have createdatu a Sharepoint 2013 workflow to check if Approval sts of current item = 0 i.e. Approved , then check out and update the item and finally checkin the item. Everything works fine till this point except that the minor version of the item is
checked in. Due to this the updated columns are not published to others.
Also, I created a Sharepoint 2010 workflow to SET CONTENT APPROVAL = APPROVED and started this workflow from my list workflow above, but the item does not get checked-in and always shows "In Progress" status with comment "The item is currently
locked for editing. Waiting for item to be checked in or for the lock to be released.".
Please let me know where I am missing out so that once the item is approved, column value gets updated and current item is still in Approved status.
Thanks

Hi,
According to your post, my understanding is that you want to update Column value after current item is Approved and then publish major version using Sharepoint 2013 designer workflow.
You will get into this kind of Catch-22 situation trying to set the Content Approval Status in SharePoint Designer workflow:
- You must check out the document before you can change the Content Approval Status
- You can't change the Content Approval Status once the document in checked out
Since you set the Require documents to be checked out before they can be edited=Yes, you will need to check out the document when run the workflow on the item. But you cannot approve a document when it is checked
out. So the logic in workflow conflicts.
As a workaround, you can use the Start Another Workflow action to start the normal Approval workflow on the document. The built-in Approval workflow can work with a document that’s not checked out.
The designer approval workflow also can work with a document that’s not checked out.
You can create two workflow using SharePoint Designer 2013.
First, create a SharePoint 2010 platform workflow.
Then, create a SharePoint 2013 platform workflow.
Then when the SharePoint 2013 platform workflow start, it will start the SharePoint 2010 platform workflow to set content approval status, then the SharePoint 2013 platform workflow will update current item value.
More information:
SharePoint Designer Workflow Content Approval Issue
SharePoint 2010 Approval Workflow with Content Approval
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to view and restore sharepoint 2013 designer workflows and how to redeploy with newer version to environments

how to view and restore sharepoint 2013 designer workflows and how to redeploy with newer version to environments
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi,
In SharePoint Designer 2010, we could not save the workflow as a template directly except the reusable workflow.
However, in SharePoint Designer 2013, we can just save all the types workflow as a template, then you can import the workflow into the new environment.
http://blogs.msdn.com/b/workflows_for_product_catalogs/archive/2012/11/02/deploying-a-workflow-on-a-different-server.aspx
In SharePoint Designer 2013, every time we publish the workflow, we would get a newer version workflow, and the old workflow version would be overwritten.
So, when you deploy the workflow in the environment, the workflow would the newer version.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

SharePoint and Nintex workflow - Error 0x80070005 (E_ACCESSDENIED)

Similar Messages

Maybe you are looking for