SharePoint application stopped after changing applicatin account

Dear Team,<o:p></o:p>
I build a　sql server reporting service report into SharePoint, and view it in SQL Server　Report Viewer Web Part, but only other users cannot see the report, it shows　the error:<o:p></o:p>
Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException:
The　permissions granted to user 'Domain\User' are insufficient for
performing this operation."<o:p></o:p>
<o:p> </o:p>
after searching the　internet, I found that I need make　sure that the service
account running the application in Central Administration　in SharePoint is same as the application account in IIS.　I checked and they are same, to make　sure there isn’t any hidden error,
I change my service　account in Central　Administration to another account, then change it back.<o:p></o:p>
<o:p> </o:p>
Here, the issue occurs, the　application in IIS stopped, I start it manually, it is OK, then I go to　the　site, it still shows 503 error, back to
IIS, the application stopped again.<o:p></o:p>
<o:p> </o:p>
How this issue happens? I choose the application　in IIS, click Advanced Settings->Identity, the identity specify to the same　account, I click
Set to type the user name and password again manually, just　like my account and password, then the application can be started successfully.<o:p></o:p>
<o:p> </o:p>
Seems the password issue in IIS, but I’m　not sure why. Any ideas?<o:p></o:p>

Hello,
Try also to restart the server, I already had this behaviour changing Search Service account and it only works after rebooting the server.
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

Similar Messages

  • Running SAPF101 after changing reconciliation accounts

    When I run SAPF101 after changing reconciliation accounts in Customer masters should  see the following adjustments:
    Cr old reconciliation account
    Dr adjustment account
    Cr adjustment account
    Dr new reconciliation account
    this then corrects the balances in the reconciliation accounts for the period end
    and then reverses on the first working day of the next period.
    Is my understanding correct?
    what I am actually seeing is:
    Cr adjustment account
    Dr adjustment account
    and reverse on the first working day of the next period
    My posting results make the exercise meaningless.
    Am I missing some config to complete this exercise in full?
    Help would be appreciated

    After going through this <a href="http://help.sap.com/erp2005_ehp_02/helpdata/en/96/8b335343ce11d189ee0000e81ddfac/frameset.htm">Documentation</a> I realize that your understanding is different from what is described. The recon account will not be invoked in the entry.
    Since we cannot post to a recon account directly, the line items are posted to the adjustment acccount. So, only adjustment accounts will be involved.
    Let's assume there ten line items in a customer account. If four line items have gone to original recon account  and the remaining six line items have gone to new recon account. When you run this program, the line items of original recon account are posted to the adj account of both the recon accounts. The postings to the adj account of the original recon account will negate the effects of the original postings. Therefore both the adj account of the original recon account and the original recon account shall be grouped together, in the financial statements.
    Similarly,  the adj account of the new recon account and the new recon account shall be grouped together in the financial statements.
    Once the P&L and B/S are made, you reverse the above entries. The reversal information is included in the program parameters.

  • Object null reference error while creating Web applications, Service applications etc after restoring AD accounts

    Hi,
    The old Active Directory accounts of my server were removed, those accounts are used by some of the SharePoint sites. A new AD account was created and when I try to replace the old accounts with new I am facing issue. I am also unable to create new web application,
    service application from my Central Administration. I also tried by restoring old accounts but still I am facing same issues, I
    am getting the error message Object
    reference not set to an instance of an object. for any create activities in Central Administration.
    Thanks in Advance for your help

    Thanks for the reply. When I am trying to update service account of services also I am getting error
    message Object
    reference not set to an instance of an object. i.e., while selecting component(web/service application from drop down) redirecting to error page

  • Incorrect Balances are displayed in FAGLB03 after changing the account curr

    Hi
    We are facing an issue in the GL balances displayed in the transaction FAGLB03. The issue has occurred after the account currency has been changed to USD and user has reversed a document (Posted in AUD).
    FAGLB03 is showing a balance in AUD (which ideally should be zero) and does not any show USD balance. The affected accont is a P&L account.
    The reason we have identified is FB08  while reversing an old document is posting the reversal document in the old document currency and do not consider the existing GL account currency.
    Steps for Recreating the issue:
    1. The Account Currency is in AUD with u201CBalance in Local Currencyu201D checked in the Master data of the GL Account
    2. Make the GL account to zero by making a Journal posting through FB01 .
    3. Change the account currency to USD .
    4. Reverse the document posted in Step 2 through FB08 .
    5. You can see the mismatch in AUD and USD balance in the transaction FAGLB03
    Error:
    System displays an amount in AUD balance in FAGLB03 (Which ideally should be zero). System does not show any balance in the total screen of USD balance but when the account is drill down the USD balances appear in the line item report against the document currency field.
    It would be really helpful if you can provide some light on the impact of this issue on month end and year end processing.
    Please also let me know if any one has come across this issue and possible solution.

    When you reversed the entry in step 4, it used USD where the original document is AUD.
    1. The Account Currency is in AUD with u201CBalance in Local Currencyu201D checked in the Master data of the GL Account
    2. Make the GL account to zero by making a Journal posting through FB01 .
    3. Change the account currency to USD .
    4. Reverse the document posted in Step 2 through FB08 .
    5. You can see the mismatch in AUD and USD balance in the transaction FAGLB03
    To correct this create a Reversal entry of the reversal entry in Step 2. Then change the account currency in AUD then do the reversal you did in Step 4. After that change the account currency to USD.

  • Lost all files and applications installed after changing user profile in the registry of windows 8.1 pc

    The original user profile on my windows 8.1 pc is C:\Apple\acer sm. I tried changing it to C:\Apple\Apple. After I rebooted my PC, I found out that all my files and applications are lost. What shall I do to recover them?
    Your help would save my life. Thank you!

    Hi AppleMist,
    We wonder if you changed the registry entry or path of user profile.
    If you did that in registry please try changing it back.
    After changing your user profile and reboot, system won’t read the profile you changed but a new user profile (C:\Apple\acer sm or TEMP) should be created by system. Try renaming this new one as acer sm.old and changing the apple back to acer sm.
    It should works fine if you didn’t change file in profile, if it doesn’t work perform a system restore.
    Regards
    D. Wu
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • ITunes password no longer works after changing the account information on iPad?

    I gave my iPad to my daughter, who changed the account information so I wouldn't be charged for her downloads.  Now I can't get into my iTunes account with my old password.  Does anyone have any suggestions?  I'm not very tech saavy!  Thanks.

    As Tyler implies: you opened up the phone and furtled about inside it, therefore the responsibility for the state of the phone lies entirely with yourself. Nobody else can help, as nobody can know what you did in there.

  • HT204088 Payment Deducted after changing my Account Bill Info

    Sir,
    60Rs have been deducted from my account for 3 time last 4 days......I really dont know why??....Now when i have changed my Account Information, Again 60 Rs has been deducted.....Please i Need the explanation for that!!!!!!!!!!!!!!

    Each time that you change your credit card details on your iTunes account a small temporary store holding charge may be applied to check that the card details are correct and valid and that it's registered to exactly the same name and address as on your iTunes account - it should disappear off your account within a few days or so.
    Store holding charge : http://support.apple.com/kb/HT3702

  • Application Issues after deleting user account

    I have an imac with several user accounts setup. two of the accounts are admin.
    User1 Admin
    User2 Admin
    sysadmin Admin
    User3 User
    User4 User
    User5 User
    User6 User
    User1 purchased a new macbook pro and we migrated all of her docs and applications to the macbook pro. after seeing that everything was working well, we deleted her old account on the imac from the "System Preferences/Accounts" tab from User2's account.
    Here's the issue:
    Now when User2 tries to install or update applications, the system responds with a permissions error message. You do not have sufficient permissions to modify this application's settings. We also run into stange errors while just using some applications
    Most applications on the machine were installed by User1 before deleting the account. Did sysadmin inherit ownership of applications and library settings of User1 upon deletion?
    Is there anyway to change the settings for all applications to allow User2 (admin group) to update and install applications? Could I just change the ownership group for sysadmin directories to admin with Read & Write?
    Thanks,
    LeoK

    Exactly what did you do to remove your old account? I hope you didn't just drag it to the Trash. If so then you don't have an account because dragging the old Home folder to the Trash is not how you remove an account.
    You say you "edited" a new account. How did you do this?

  • After changing Itunes account information, how do I get Garage Band songs back from Apple TV 1st Gen to my MacBook?

    I made a few songs on Garage Band and shared them with my Apple TV, 1st generation.  Then, my Itunes account got hacked and I had to change my Itunes ID and password.  Now, those songs are only on the Apple TV drive, but do not show up on my Itunes music list.  (I deleted them from the Garage Band application, apparently.)  Is there some way to get them back onto my MacBook.  I want to use them in an Imovie.  Thanks.

    Welcome to the Apple community.
    Unfortunately, you would need to remove the hard drive from the Apple TV and connect it to your Mac using an appropriate cradle in order to remove those files.

  • Vendor open items report without page break after changing vendor account

    Hi,
    I would like to get the vendor open items report without pagination when the vendor account changes.
    The option of deleting the * mark in the Filter page is not valid for me, because this way the vendor's name dissappear. I mean, it would be ok if I could show in the output of the report the name of the vendors.
    Thanks in advance.

    HI,
    If I understood your issue correctly then in the report S_ALR_87012085 is a field "Summarization level (0-4)" in the output controls.
    You just have to set this field to the value '2'.
    When you set the field to two, the page break will first executed, when the page is "full".
    If you want to see information about the "Summarization level (0-4)" field, you just have to set the cursor in it, and press F1.
    I believe this answer solve your problem.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • Application crashes (after changing wifi network?)

    Hi
    I've noticed that new apps I've installed (facebook, remote, last.fm, twitterific) work fine whilst in the confines of my wifi network.
    However, once I've taken the phone out and about and connected to other networks the apps are rendered unusable - they just crash on startup, all of them
    It doesn't happen with any preinstalled apps?
    Maybe it's just coincidence but either way it renders all that good stuff absolutely useless.
    I've submitted the crash report and manually views the crashes in /username/Library/Logs/CrashReporter/MobileDevice
    Doesn't mean much to me though - say's backtrace unavailable and EXCBADINSTRUCTION (SIGILL) is given as the exception.
    Anyone else having the same problems?

    Let's look for another possibility -- does it also happen after you sync the phone to iTunes? If you sync the phone but do not copy apps purchased on the phone back to iTunes it is well-known that they will stop working on the phone. There's even a warning about this in the iPhone prompt that asks if you want to sync the apps to iTunes. If you have never seen this prompt you probably ignored it some time in the past after purchasing music. It will not re-prompt you if you ignore it.

  • I cant get onto my MobileMe account even after changing my password

    I am stuck as i cant sync or anything on my mobile me account even after changing password can anybody shed some light on this.

    If the user account is associated with an Apple ID, and you know that account password, the Apple ID can be used to reset your user account password.
    Otherwise, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, type this:
    resetpassword
    That's one word with no spaces. Then press return. A Reset Password window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
    Select  ▹ Restart from the menu bar.
    You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.

  • Applications folder icon changes after restart

    I changed the icon of my applications-folder.
    after every restart the original icon (pen, ruler,...) comes back again.
    how can this problem be solved?
    any ideas?
    thank you
    frank

    Log in as root. Change the icon. Log out and log back into your "normal" account.
    DD

  • All the applications gone after region change.

    Hi,
    I'm just wondering why there is no warning or something for the user who is changing his accounts region settings?
    Everithing he purchased before will be lost and I guess it is important enough to be underlined once again during the region change
    It doesn't seem fair that user would need to buy everithing once again and is not warned about that even with a single word.
    The procedure is the following now:
    - user opens his account information
    - user checks information and realises that it is not correct now because he moved lets say from Russia to Poland.
    - user changes the region using the information about his new credit card (Itunes crashes during this procedure, but maybe it is OK :/ )
    - all the application are gone.
    - PROFIT (but not for the user of course).
    It is easy to guess that this user was me
    If I had been warned somewhere in the middle I wouldn't change the region of course, I would rather create new account for Poland.
    But who cares about the user, right?

    Im having the same issue. It didnt happen right after the update. I updated at 1pm and it happened at 9pm. My memory is still there for them when i plug it into iTunes but the memory is now under "other" instead of apps.

  • Clear postings after G/L account is changed

    Hello,
    I have a stituation, with a G/L account.
    In our case, the customer required to have the G/L account enabled for open items. The balance was 0.roed, and we tryed to enable the open items. After setting the error message stated: 'Balace 0 but open items exists' to a warning, we were able to change the account.
    Now the question. The customer want to clear  ( mark with the green box ) the posting that were maded before the change. At the moment they apperar with a green line, and the status is posted.
    Trying to celear the account din't work, as SAP reported no open items to be found.
    If you have any hint please assist on this.
    Regards,
    Adi

    Hello Customer,
    I guess you've created an inconsistency in the system.
    The inccorectly display of the 'posted' items is not avoidable in this case.                                                                               
    The reason is, that if the account has the Open Item Management not            
    set, the documents get saved in the index table BSIS.                          
    So the                                                                         
    Open - BSIS                                                                    
    Cleared - BSAS                                                                 
    is not given in the case the Open Item Management is not set.                                                                               
    Now, after the change to Open Item Management, the real 'open' items           
    get saved also in BSIS. After the clearing they get shifted to BSAS.           
    I'd suggest you to open a message for SAP on the component FI-GL-GL-X and ask them to check the situation. Please, mention the account which was changed.
    Regards,
    REnan

Maybe you are looking for