Sharepoint config DB log size growth

We found articles referring the growth of Sharepoint_config DB log file.
We have sharepoint 2013 installation since last 2 months all with default settinsg and we had been performing
daily trn log backups, however  it still sees that Sharepoint_config DB log growth is around 30 GB
Though there are articles suggesting hot to truncate logs manually , shall this be done explicitly each week?
also changing recovery model to Simple ( we dont run mirroring/log shipping ) however we wuld liek to have Sharepoint_config db backup intact.
 if you do not require mirroring, log shipping and point in time recovery, you dont have to set Full Recovery Model on your database.

thanks
we have only one web application and a trusted farm solution. so what is it which should be making sharepoint_config db logs be so heavily active?
regarding  point in time restoration : so will this mean if we have daily full backup on conf db and( as  when we do manual changes to configuration like updates,reboots), the full backup is enough and we shall go ahead with recover model as simple
or else  shrink db logs regulary.
I am checking the  status by manually running all tasks- shrink db files- selecting file type as log log - it shows only around 2369.02 MB (7%) as available free space where as total size .ldf  is in GB?
so does it mean a normal Shrnk db will  not release more than 2 GB. and truncation is required?

Similar Messages

  • Usage logs size SharePoint

    Hello,<o:p></o:p>
    The usage logs size in my SharePoint farm is so big,
    I had a lot of usage logs from log time ago, checking my servers I
    discover that the create date the older logs coincided with the last
    server restart. Then I thought, maybe if I restart SharePoint 2010 timer service the
    old logs disappear.. Then I did it and now I only have the logs of today :) My
    question is: How does this work? I don't understand why is necessary to restart
    SharePoint 2010 timer service
    to delete the old logs.
    Thank you in advance!

    hi
    you can do it using CA or powershell script
    http://technet.microsoft.com/en-us/library/ee748619%28v=office.14%29.aspx#section2
    for PS commands check this link
    http://msdn.microsoft.com/en-us/library/office/ff595318%28v=office.14%29.aspx
    Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

  • Weblogic 8.1 Server log size increase in Production environment

    Hi,
    Issue:: One of the log file is increasing in size and exceeding beyond the size mentioned in the configuration file resulting in application outage.
    Issue description:
    We are having problems with the log size in the Weblogic 8.1 server. The fileminsize has been mentioned in the config.xml.
    New log files like MYsvr.log00001,MYsvr.log00002, MYsvr.log00003, MYsvr.log00004 etc are also being generated appropriately when the max file size has been reached. But simultaneously, one of the files is growing in size, exceeding the limit mentioned in the configuration file. Eg.. the MYsvr.log00001 file is 800MB in size while the other files(MYsvr.log00002, MYsvr.log00003 etc are 10MB in size)
    This increase in size of the log has been resulting in an application outage.
    More Details:
    1. Server: BEA Weblogic 8.1 server
    2. Log size is fine in other environements. This is a problem only in the production environment.
    3. The entry in the config.xml is as follows:
    <Server ListenPort="6313" Name="MYsvr" NativeIOEnabled="true" TransactionLogFilePrefix="./">
    <ServerStart Name="MYsvr"/>
    <Log FileMinSize="10000" FileName="MYsvr.log" Name="MYsvr"
    NumberOfFilesLimited="true" RotationType="bySize"/>
    <SSL Name="MYsvr"/>
    <ServerDebug Name="MYsvr"/>
    <WebServer Name="MYsvr"/>
    <ExecuteQueue Name="default" ThreadCount="15"/>
    <KernelDebug Name="MYsvr"/>
    </Server>
    Could you please help with this issue ?
    Thank you.

    Can someone please provide a solution for the issue

  • How to design SQL server data file and log file growth

    how to design SQL DB data file and log file growth- SQL server 2012
    if my data file is having 10 GB sizze and log file is having 5 GB size
    what should be the size in MB (not in %) of autogrowth. based on what we have to determine the ideal size of file auto growth.

    It's very difficult to give a definitive answer on this. Best principal is to size your database correctly in advance so that you never have to autogrow, of course in reality that isn't always practical.
    The setting you use is really dictated by the expected growth in your files. Given that the size is relatively small why not set it to 1gb on the datafile(s) and 512mb on the log file? The important thing is to monitor it on an on-going basis to see if that's
    the appropriate amount.
    One thing you should do is enable instant file initialization by granting the service account Perform Volume Maintenance tasks in group policy. This will allow the data files to grow quickly when required, details here:
    https://technet.microsoft.com/en-us/library/ms175935%28v=sql.105%29.aspx?f=255&MSPPError=-2147217396
    Also, it possible to query the default trace to find autogrowth events, if you wanted you could write an alert/sql job based on this 
    SELECT
    [DatabaseName],
    [FileName],
    [SPID],
    [Duration],
    [StartTime],
    [EndTime],
    CASE [EventClass]
    WHEN 92 THEN 'Data'
    WHEN 93 THEN 'Log' END
    FROM sys.fn_trace_gettable('c:\path\to\trace.trc', DEFAULT)
    WHERE
    EventClass IN (92,93)
    hope that helps

  • Log File Growth after Database ReIndexing

    Hi,
    After doing Biztalk MsgBox and DTADb re-indexing by executing bts_RebuildIndexes and dtasp_RebuildIndexe sps respectively, it has been observed that the transaction log size for both the DBs went high and also Biztalk jobs (like, DTAPurge) were
    not completing.
    I am using BTS2006 and SQL2005.
    Because of the growth, we had to introduce extra storage. But it seems that the size is under control now.
    Kindly help me to understand what went wrong or why it happened?
    Thanks,
    Sugata

    Ideally while running the stored proc for rebuilding indexes, there shouldn't be any processing happening.
    So it's suggested to stop all the host instances, SQL Agent and IIS App pool if you have any SOAP/WCF receive location.
    You can run MBV report from below and check if it reports any issues. 
    Message Box Viewer -  http://blogs.technet.com/b/jpierauc/archive/2007/12/18/msgboxviewer.aspx
    Later use Terminator tool to address the concerns it reports. You may have to repair references.
    http://www.microsoft.com/en-in/download/details.aspx?id=2846
    Also, run the below query for all the databases and check if the output doesn't have any error(red color outcome) in the output.
    Use <DatabaseName>
    dbcc checkdb
    Let us know if you are still facing any issue.
    Thanks,
    Prashant
    Please mark this post accordingly if it answers your query or is helpful.

  • SharePoint 2013 audit log unexpected error

    In one of my SharePoint 2013 site collection, when i try to save a audit log,  i get unexpected error. It worked fine before last week and no any special setting has been applied before the issue appeared. The issue doesn't appear in other site collection.
    i have tried to reproduce the issue with farm admin account and site collection admin, no success for all these accounts. However, i can see access denied error in the ULS log although i think the permission is not the problem. You may check the ULS log below. 
    06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
    0x2918 0xC33B005
    2jtj Assert
    ShipAssert location: (0)  condition:   StackTrace:  at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
    ea429c9c-4288-00dd-4f6f-d2bb079f3d44
    06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
    0x2918 SharePoint Foundation
    Unified Logging Service c91s
    Monitorable Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
    ea429c9c-4288-00dd-4f6f-d2bb079f3d44
    06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
    0x2918 0xEB2D00B
    2jtk High
    Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
    06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
    0x2918 0xEB2D00B
    2jtq High
    Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
    06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
    0x2918 0xEB2D005
    2jx8 High
    Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
    06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
    0x2918 0xEB2D005
    5s03 High
    Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
    06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
    0x2918 0xEB2D005
    5s02 High
    Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
    06/19/2014 10:48:09.41 w3wp.exe (0x77C0)
    0x2918 0xEB2D005
    2jw0 High
    Metro library failure (0x80070005): ea429c9c-4288-00dd-4f6f-d2bb079f3d44
    06/19/2014 10:48:09.43 w3wp.exe (0x77C0)
    0x2918 SharePoint Foundation
    Database ahjqp
    High [Forced due to logging gap, cached @ 06/19/2014 10:48:07.68, Original Level: Verbose] SQL connection time: 0.064296296654057
    ea429c9c-4288-00dd-4f6f-d2bb079f3d44
    06/19/2014 10:48:09.43 w3wp.exe (0x77C0)
    0x2918 SharePoint Foundation
    General 8nca
    Medium Application error when access /_layouts/15/CustomizeReport.aspx, Error=拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED))   在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32
    errorCode, IntPtr errorInfo)     在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)     在 System.IO.BufferedStream.FlushWrite()     在 System.IO.StreamWriter.Dispose(Boolean disposing)
        在 System.IO.StreamWriter.Close()     在 System.Xml.XmlTextWriter.Close()     在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()
        在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)     在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
    sender, EventArgs e)     在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    ea429c9c-4288-00dd-4f6f-d2bb079f3d44
    06/19/2014 10:48:09.44 w3wp.exe (0x77C0)
    0x2918 SharePoint Foundation
    Runtime tkau
    Unexpected System.Runtime.InteropServices.COMException: 拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED))    在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr
    errorInfo)     在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)     在 System.IO.BufferedStream.FlushWrite()     在 System.IO.StreamWriter.Dispose(Boolean disposing)     在
    System.IO.StreamWriter.Close()     在 System.Xml.XmlTextWriter.Close()     在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()  
      在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)     在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
    sender, EventArgs e)     在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    ea429c9c-4288-00dd-4f6f-d2bb079f3d44
    06/19/2014 10:48:09.44 w3wp.exe (0x77C0)
    0x2918 SharePoint Foundation
    General ajlz0
    High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): 引发类型为“System.Web.HttpUnhandledException”的异常。 ---> System.Runtime.InteropServices.COMException (0x80030005): 拒绝访问。 (异常来自 HRESULT:0x80030005
    (STG_E_ACCESSDENIED))     在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)     在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)  
      在 System.IO.BufferedStream.FlushWrite()     在 System.IO.StreamWriter.Dispose(Boolean disposing)     在 System.IO.StreamWriter.Close()     在 System.Xml.XmlTextWriter.Close()     在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()
        在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)    
    在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs e)     在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     在 System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     在 System.Web.UI.Page.HandleError(Exception e)     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
        在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     在 System.Web.UI.Page.ProcessRequest()     在 System.Web.UI.Page.ProcessRequest(HttpContext context)  
      在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     在 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    ea429c9c-4288-00dd-4f6f-d2bb079f3d44

    i have added the account to the local admin group of SQL Server and SharePoint Server. the issue remains. it is the system admin of the SQL server. 
    Logging Correlation Data
    Medium
    Name=Request (POST:https://xxx/_layouts/15/CustomizeReport.aspx?ReportId=df9e0f20-f356-4115-9286-ac6eecbc03ce&Category=Auditing)
    Authentication Authorization
    Medium
    Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|tlw\farmadmin, ClaimsCount=28
    Logging Correlation Data
    Medium
    Site=/
    Information Rights Management
    Medium
    Information Rights Management (IRM): Requesting user is System account.
    Files
    High
    UserAgent not available, file operations may not be optimized.    在 Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean
    disposeIlb)     在 Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult)     在 Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid
    databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)     在 Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32
    rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres)     在 Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet,
    String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean&
    pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String&
    pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies,
    Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     在 Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte
    bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument,
    Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object&
    pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object&
    pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     在 Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String
    bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean&
    pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object&
    pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel,
    UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId)     在 Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri
    pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes,
    Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders,
    String& redirectUrl, Boolean& ObjectIsList, Guid& listId)     在 Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String
    path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String&
    siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64&
    bytes)     在 Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetWebPartPageData(HttpContext context, String path, Boolean throwIfFileNotFound)     在 Microsoft.SharePoint.ApplicationRuntime.SPVirtualPathProvider.GetCacheKey(String
    virtualPath)     在 System.Web.Compilation.BuildManager.GetVPathBuildResultFromCacheInternal(VirtualPath virtualPath, Boolean ensureIsUpToDate)     在 System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath
    virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)     在 System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath
    virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)     在 System.Web.Compilation.BuildManager.GetVPathBuildResult(HttpContext context, VirtualPath virtualPath,
    Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean ensureIsUpToDate)     在 System.Web.UI.MasterPage.CreateMaster(TemplateControl owner, HttpContext context, VirtualPath masterPageFile, IDictionary contentTemplateCollection)    
    在 System.Web.UI.Page.ApplyMasterPage()     在 System.Web.UI.Page.PerformPreInit()     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)    
    在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     在 System.Web.UI.Page.ProcessRequest()     在 System.Web.UI.Page.ProcessRequest(HttpContext context)    
    在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     在 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)     在 System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception
    error)     在 System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)     在 System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)    
    在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer,
    IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     在 System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus)     在 System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
    pHandler, RequestNotificationStatus& notificationStatus)     在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)    
    在 System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
    Files
    Medium
    Spent 0 ms to bind 29783 byte file stream
    Monitoring
    High
    Leaving Monitored Scope (GetFileAndMetaInfo). 执行时间=17.6751425083646
    Monitoring
    High
    Leaving Monitored Scope (GetWebPartPageContent). 执行时间=17.8435806939653
    OpenXml
    Medium
    OfficePackageLibrary::OpenPackage(app=3, path=C:\Users\FarmAdmin\AppData\Local\Temp\tmpBFE2.tmp, fcm=3)
    Database
    High
    [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
    Database
    High
    [Forced due to logging gap, cached @ 06/20/2014 14:36:33.08, Original Level: Verbose] SQL connection time: 0.0727483919888626
    Database
    High
    [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
    Database
    High
    [Forced due to logging gap, cached @ 06/20/2014 14:36:35.00, Original Level: Verbose] SQL connection time: 0.07969118458531
    Database
    High
    [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
    0xC33B005
    Assert
    ShipAssert location: (0)  condition:   StackTrace:  at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
    Unified Logging Service
    Monitorable
    Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
    0xEB2D00B
    High
    Metro library failure (0x80070005):
    0xEB2D00B
    High
    Metro library failure (0x80070005):
    0xEB2D005
    High
    Metro library failure (0x80070005):
    0xEB2D005
    High
    Metro library failure (0x80070005):
    0xEB2D005
    High
    Metro library failure (0x80070005):
    0xEB2D005
    High
    Metro library failure (0x80070005):
    0xC33B005
    Assert
    ShipAssert location: (0)  condition:   StackTrace:  at onetnative.dll: (sig=7b7c0170-6822-4da2-8b1b-70510b777a4a|2|onetnative.pdb, offset=12700) at onetnative.dll: (offset=125F1)
    Unified Logging Service
    Monitorable
    Watson bucket parameters: Microsoft SharePoint Foundation 4, ULSShipAssert12, 2jtj, 15.0.4481.0
    0xEB2D00B
    High
    Metro library failure (0x80070005):
    0xEB2D00B
    High
    Metro library failure (0x80070005):
    0xEB2D005
    High
    Metro library failure (0x80070005):
    0xEB2D005
    High
    Metro library failure (0x80070005):
    0xEB2D005
    High
    Metro library failure (0x80070005):
    0xEB2D005
    High
    Metro library failure (0x80070005):
    Database
    High
    [Forced due to logging gap, cached @ 06/20/2014 14:36:36.86, Original Level: Verbose] SQL connection time: 0.0706353681551612
    General
    Medium
    Application error when access /_layouts/15/CustomizeReport.aspx, Error=拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED))   在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode,
    IntPtr errorInfo)     在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)     在 System.IO.BufferedStream.FlushWrite()     在 System.IO.StreamWriter.Dispose(Boolean
    disposing)     在 System.IO.StreamWriter.Close()     在 System.Xml.XmlTextWriter.Close()     在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()    
    在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)     在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
    sender, EventArgs e)     在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Runtime
    Unexpected
    System.Runtime.InteropServices.COMException: 拒绝访问。 (异常来自 HRESULT:0x80030005 (STG_E_ACCESSDENIED))    在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)    
    在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset, Int32 cb)     在 System.IO.BufferedStream.FlushWrite()     在 System.IO.StreamWriter.Dispose(Boolean disposing)    
    在 System.IO.StreamWriter.Close()     在 System.Xml.XmlTextWriter.Close()     在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()    
    在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable query, SPFolder folder, ReportNameGenerator reportNameGenerator)     在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object
    sender, EventArgs e)     在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    General
    High
    Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): 引发类型为“System.Web.HttpUnhandledException”的异常。 ---> System.Runtime.InteropServices.COMException (0x80030005): 拒绝访问。 (异常来自 HRESULT:0x80030005
    (STG_E_ACCESSDENIED))     在 System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)     在 Microsoft.Office.Server.OpenXml.Internal.ByteStream.Write(Byte[] rgb, Int32 offset,
    Int32 cb)     在 System.IO.BufferedStream.FlushWrite()     在 System.IO.StreamWriter.Dispose(Boolean disposing)     在 System.IO.StreamWriter.Close()     在 System.Xml.XmlTextWriter.Close()    
    在 Microsoft.Office.RecordsManagement.Reporting.AuditReportGenerator.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportData.Dispose()     在 Microsoft.Office.RecordsManagement.Reporting.ReportBase.AggregateReports(Hashtable
    query, SPFolder folder, ReportNameGenerator reportNameGenerator)     在 Microsoft.Office.RecordsManagement.Reporting.ApplicationPages.CustomizeReport.OKBtn_Click(Object sender, EventArgs e)     在 System.Web.UI.WebControls.Button.RaisePostBackEvent(String
    eventArgument)     在 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     在 System.Web.UI.Page.HandleError(Exception e)     在 System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     在 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     在 System.Web.UI.Page.ProcessRequest()    
    在 System.Web.UI.Page.ProcessRequest(HttpContext context)     在 System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()     在 System.Web.HttpApplication.ExecuteStep(IExecutionStep
    step, Boolean& completedSynchronously)

  • How to config the font size of rich pod?

    Hi,
    Does anyone know how to config the font size of rich pod? It's too small.
    Thanks!

    You can do that using the PRINT-CONTROL Statement.This will only work when you send the list to the printer.Sample code is as below :
    REPORT zfont NO STANDARD PAGE HEADING LINE-SIZE 80 LINE-COUNT 65.
    Start of print-control
    NEW-PAGE PRINT ON.
    PRINT-CONTROL FUNCTION 'SF000'.
    WRITE: / 'This is CPI 20'.
    SKIP.
    PRINT-CONTROL FUNCTION 'SF020'.
    WRITE: / 'This is CPI 6'.
    SKIP.
    PRINT-CONTROL FUNCTION 'SF008'.
    WRITE: / 'This is CPI 12'.
    Depending on your SAP printer device, this may also work
    PRINT-CONTROL FONT 1 LPI 6.
    you can try to change font and LPI numbers
    WRITE: / 'font 1 lpi 6'.
    PRINT-CONTROL FONT 2 LPI 6.
    WRITE: / 'font 2 lpi 6'.
    PRINT-CONTROL FONT 3 LPI 6.
    WRITE: / 'font 3 lpi 6'.
    End of print-control
    NEW-PAGE PRINT OFF.
    *--- End of Program

  • Urgent: Huge diff in total redo log size and archive log size

    Dear DBAs
    I have a concern regarding size of redo log and archive log generated.
    Is the equation below is correct?
    total size of redo generated by all sessions = total size of archive log files generated
    I am experiencing a situation where when I look at the total size of redo generated by all the sessions and the size of archive logs generated, there is huge difference.
    My total all session redo log size is 780MB where my archive log directory size has consumed 23GB.
    Before i start measuring i cleared up archive directory and started to monitor from a specific time.
    Environment: Oracle 9i Release 2
    How I tracked the sizing information is below
    logon as SYS user and run the following statements
    DROP TABLE REDOSTAT CASCADE CONSTRAINTS;
    CREATE TABLE REDOSTAT
    AUDSID NUMBER,
    SID NUMBER,
    SERIAL# NUMBER,
    SESSION_ID CHAR(27 BYTE),
    STATUS VARCHAR2(8 BYTE),
    DB_USERNAME VARCHAR2(30 BYTE),
    SCHEMANAME VARCHAR2(30 BYTE),
    OSUSER VARCHAR2(30 BYTE),
    PROCESS VARCHAR2(12 BYTE),
    MACHINE VARCHAR2(64 BYTE),
    TERMINAL VARCHAR2(16 BYTE),
    PROGRAM VARCHAR2(64 BYTE),
    DBCONN_TYPE VARCHAR2(10 BYTE),
    LOGON_TIME DATE,
    LOGOUT_TIME DATE,
    REDO_SIZE NUMBER
    TABLESPACE SYSTEM
    NOLOGGING
    NOCOMPRESS
    NOCACHE
    NOPARALLEL
    MONITORING;
    GRANT SELECT ON REDOSTAT TO PUBLIC;
    CREATE OR REPLACE TRIGGER TR_SESS_LOGOFF
    BEFORE LOGOFF
    ON DATABASE
    DECLARE
    PRAGMA AUTONOMOUS_TRANSACTION;
    BEGIN
    INSERT INTO SYS.REDOSTAT
    (AUDSID, SID, SERIAL#, SESSION_ID, STATUS, DB_USERNAME, SCHEMANAME, OSUSER, PROCESS, MACHINE, TERMINAL, PROGRAM, DBCONN_TYPE, LOGON_TIME, LOGOUT_TIME, REDO_SIZE)
    SELECT A.AUDSID, A.SID, A.SERIAL#, SYS_CONTEXT ('USERENV', 'SESSIONID'), A.STATUS, USERNAME DB_USERNAME, SCHEMANAME, OSUSER, PROCESS, MACHINE, TERMINAL, PROGRAM, TYPE DBCONN_TYPE,
    LOGON_TIME, SYSDATE LOGOUT_TIME, B.VALUE REDO_SIZE
    FROM V$SESSION A, V$MYSTAT B, V$STATNAME C
    WHERE
    A.SID = B.SID
    AND
    B.STATISTIC# = C.STATISTIC#
    AND
    C.NAME = 'redo size'
    AND
    A.AUDSID = sys_context ('USERENV', 'SESSIONID');
    COMMIT;
    END TR_SESS_LOGOFF;
    Now, total sum of REDO_SIZE (B.VALUE) this is far less than archive log size. This at time when no other user is logged in except myself.
    Is there anything wrong with query for collecting redo information or there are some hidden process which doesnt provide redo information on session basis.
    I have seen the similar implementation as above at many sites.
    Kindly provide a mechanism where I can trace which user is generated how much redo (or archive log) on a session basis. I want to track which all user/process are causing high redo to generate.
    If I didnt find a solution I would raise a SR with Oracle.
    Thanks
    [V]

    You can query v$sess_io, column block_changes to find out which session generating how much redo.
    The following query gives you the session redo statistics:
    select a.sid,b.name,sum(a.value) from v$sesstat a,v$statname b
    where a.statistic# = b.statistic#
    and b.name like '%redo%'
    and a.value > 0
    group by a.sid,b.name
    If you want, you can only look for redo size for all the current sessions.
    Jaffar

  • Why the flashback log'size smaller than the archived log ?

    hi, all . why the flashback log'size smaller than the archived log ?

    Lonion wrote:
    hi, all . why the flashback log'size smaller than the archived log ?Both are different.
    Flash logs size depends on parameter DB_FLASHBACK_RETENTION_TARGET , how much you want to keep.
    Archive log files is dumped file of Online redo log files, It can be either size of Online redo log file size or less depending on online redo size when switch occurred.
    Some more information:-
    Flashback log files can be created only under the Flash Recovery Area (that must be configured before enabling the Flashback Database functionality). RVWR creates flashback log files into a directory named “FLASHBACK” under FRA. The size of every generated flashback log file is again under Oracle’s control. According to current Oracle environment – during normal database activity flashback log files have size of 8200192 bytes. It is very close value to the current redo log buffer size. The size of a generated flashback log file can differs during shutdown and startup database activities. Flashback log file sizes can differ during high intensive write activity as well.
    Source:- http://dba-blog.blogspot.in/2006/05/flashback-database-feature.html
    Edited by: CKPT on Jun 14, 2012 7:34 PM

  • How to change redo log size in oracle 10g

    Hi Experts,
    Can anybody confirm how to change redo log size in oracle 10g?
    Amit

    Dear Amit,
    You can enlarge the size of existing Online Redo log files, by adding new groups with different size of files (origlog$/mirrlog$) and then carefully droping the old groups with  their associated inactive files.
    Please refer SAP Note 309526 - Enlarging redo log files to perform the activity.
    Steps to perform:
    STEP-1. Analyze the exisiting situation and prepare an action plan.
    A. You have to ensure that no more than one log switch per minute occurs during peak times.
    It may also be necessary to increase the size of the online redo logs until they are large enough.
    Too many log switches lead to too many checkpoints, which in turn lead to a high writing load in the I/O subsystem.
    Use ST04 -> Additional Functions --> Display GV$-Views
    There you can select
    Gv$LOG_HISTORY --->for determing your existing LOG switching frequency.
    GV$LOG -
    > list the status(INACTIVE/CURRENT/ACTIVE) /size/sequence no. of existing online redolog files
    GV$LOGFILE  --- > list the information of existing online  redolog files with their storage paths
    You can document the existing situation of Online Redo Log Fiile management before going to enlarge Redo Log Files.
    It will be helpful, if something goes wrong while performing activities.
    B. Based on above Situation analysis, Plan your New Redo Log Group and there Members with new optimal size.
    e.g.
    Group No.         Redo Log File Locations  u201C/oracle/<SID>/u201D                  Size
                                 /origlogA                  /mirrlogA            
    15                        log_g15m1.dbf         log_g15m2.dbf               100 MB
    17                        log_g17m1.dbf            log_g17m2.dbf               100 MB
                                /origlogB                    /mirrlogB
    16                       log_g16m1.dbf          log_g16m2.dbf            100 MB
    18                       log_g18m1.dbf            log_g18m2.dbf            100 MB
    Continue to next.....

  • Archived redo log size more less than online redo logs

    Hi,
    My database size around 27 GB and redo logs sizes are 50M. But archive log size 11M or 13M, and logs are switching every 5-10min. Why?
    Regards
    Azer Imamaliyev

    Azer_OCA11g wrote:
    1) Almost all archive logs sizes are 11 or 13M.. But sometimes 30, 37M.
    2)
    select to_char(completion_time, 'dd.mm.yyyy HH24:MI:SS')
    from v$archived_log
    order by completion_time desc;
    10.02.2012 11:00:26
    10.02.2012 10:50:23
    10.02.2012 10:40:05
    10.02.2012 10:29:34
    10.02.2012 10:28:26
    10.02.2012 10:18:07
    10.02.2012 10:05:04
    10.02.2012 09:55:03
    10.02.2012 09:40:54
    10.02.2012 09:28:06
    10.02.2012 09:13:44
    10.02.2012 09:00:17
    10.02.2012 08:45:04
    10.02.2012 08:25:04
    10.02.2012 08:07:12
    10.02.2012 07:50:06
    10.02.2012 07:25:05
    10.02.2012 07:04:50
    10.02.2012 06:45:04
    10.02.2012 06:20:04
    10.02.2012 06:00:12
    3) There arent any serious change at DB level.. almost these messages show in alert log since creating DB..Two simple thoughts:
    1) Are you running with archive log compression - add the "compressed" column to the query above to see if the archived log files are compressed
    2) The difference may simply be a reflection of the number and sizes of the public and private redo threads you have enabled - when anticipating a log file switch Oracle leaves enough space to cater for threads that need to be flushed into the log file, and then doesn't necessarily have to use it.
    Here's a query (if you can run as SYS) to show you your allocation of public and private threads
    select
         PTR_KCRF_PVT_STRAND           ,
         FIRST_BUF_KCRFA               ,
         LAST_BUF_KCRFA                ,
         TOTAL_BUFS_KCRFA              ,
         STRAND_SIZE_KCRFA             ,
         indx
    from
         x$kcrfstrand
    ;Regards
    Jonathan Lewis
    http://jonathanlewis.wordpress.com
    Author: <b><em>Oracle Core</em></b>

  • Update Multiple Columns when concerned about redo/undo log sizes.

    Hi ,
    I have update statements that updates multiple columns at once if any of them is changed. What I see that even though the value of column is not changed it still increases the redo size.
    Below is a sample code similar to the ones in my code. Basically I check whether there is a difference in any of the columns to be updated and update all of them.
    Is there a way to improve redo log size without splitting the update statement for every column that I will be updating. Redo/Undo log size is a concern for us..
      For i In 1.rec.Count Loop
        Update employees e
           Set e.first_name = rec(i).first_name, e.last_name = rec(i).last_name
         Where e.first_name != rec(i).first_name
            Or e.last_name != rec(i).last_name;
      End Loop;My database is 10g.

    Muhammed Soyer wrote:
    Redo/Undo log size is a concern for us..You are worried about the wrong thing.
    If you are concerned about the amount of undo and redo, you should be less concerned about the small diffrence between updating 1 or 3 columns and remove the loop that is contributing to a massive increase in both undo and redo.
    Re: global temporary table row order
    Name                                  Run1        Run2        Diff
    STAT...undo change vector size     240,500   6,802,736   6,562,236
    STAT...redo size                 1,566,136  24,504,020  22,937,884Run2 shows what adding a loop to a regular SQL statement will do to undo and redo. It made the redo used 15 times greater and the undo almost 30 times greater.

  • Very high transaction log file growth

    Hello
    Running Exchange 2010 sp2 in a two node DAG configuration.  Just recently i have noticed a very high transaction log file growth for one database. The transaction logs are growing so quickly that i have had to turn on circular logging in order to prevent
    the log lun from filling up and causing the database to dismount. I have tried several things to try find out what is causing this issue. At first i thought this could be happening because of virus, an Active Sync user, a users outlook client, or our salesforce
    integration, howerver when i used exmon, i could not see any unusual high user activity, also when i looked at the itemcount for all mailboxes in the particular database that is experiencing the high transaction log file growth, i could not see any mailboxes
    with unusual high item count, below is the command i ran to determine this, i ran this command sever times. I also looked at the message tracking log files, and again could see no indication of a message loop or unusual high message traffic for a
    particlar day. I also followed this guide hopping that it would allow me to see inside the transaction log files, but it didnt produce anything that would help me understand the cause of this issue. When i ran the below tool againts the transaction log files,
    i saw DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD, or OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO, or HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH.
    I am starting to run out of ideas on how to figure out what is causing the log file build up. Any help is greatly appreciated.
    http://blogs.msdn.com/b/scottos/archive/2007/07/12/rough-and-tough-guide-to-identifying-patterns-in-ese-transaction-log-files.aspx
    Get-Mailbox -database databasethatkeepsgrowing | Get-MailboxStatistics | Sort-Object ItemCount -descending |Select-Object DisplayName,ItemCount,@{name="MailboxSize";exp={$_.totalitemsize}} -first 10 | Convertto-Html | out-File c:\temp\report.htm
    Bulls on Parade

    If you have users with iPhones or Smart Phones using ActiveSync then one of the quickest ways to see if this is the issue is to have users shot those phones off to see if the problem is resolved.  If it is one or more iPhones then perhaps look at
    what IOS they are on and get them to update to the latest version or adjust the ActiveSync connection timeout.  NOTE: There was an issue where iPhones caused runaway transactions logs and I believe it was resolved with IOS 4.0.1
    There was also a problem with the MS CRM client awhile back so if you are using that check out this link.
    http://social.microsoft.com/Forums/en/crm/thread/6fba6c7f-c514-4e4e-8a2d-7e754b647014
    I would also deploy some tracking methods to see if you can hone in on the culprits, i.e. If you want to see if the problem is coming from an internal Device/Machine you can use one of the following
    MS USER MONITOR:
    http://www.microsoft.com/downloads/en/details.aspx?FamilyId=9A49C22E-E0C7-4B7C-ACEF-729D48AF7BC9&displaylang=en and here is a link on how to use it
    http://www.msexchange.org/tutorials/Microsoft-Exchange-Server-User-Monitor.html
    And this is a great article as well
    http://blogs.msdn.com/b/scottos/archive/2007/07/12/rough-and-tough-guide-to-identifying-patterns-in-ese-transaction-log-files.aspx
    Also check out ExMon since you can use it to confirm which mailbox is unusually active , and then take the appropriate action.
     http://www.microsoft.com/downloads/en/details.aspx?FamilyId=9A49C22E-E0C7-4B7C-ACEF-729D48AF7BC9&displaylang=en
    Troy Werelius
    www.Lucid8.com
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline EDB's and Live Exchange Servers with Lucid8's DigiScope

  • I am handling logistics department in a company, i am handling more than 100 calls in a day. But my iPhone 4 have only 100 number call history. How to increase my call log size or kindly suggest a better app for storing 1 month call history..

    I am handling logistics department in a company, i am handling more than 100 calls in a day. But my iPhone 4 have only 100 number call history. How to increase my call log size or kindly suggest a better app for storing 1 month call history..

    Here's one:
    https://itunes.apple.com/us/app/callog/id327883585?mt=8

  • About:config tabs min size doesn't work

    about:config tabs min size doesn't work.

    The about:config settings for setting tab widths have been removed from Firefox 4, to set tab width you can use the Custom Tab Width extension - https://addons.mozilla.org/firefox/addon/custom-tab-width

Maybe you are looking for

  • Can I create an iTMS store account on my iPod Touch ?

    Hello my fellow iPod Touch users, I just got an iPod Touch and a MacBook is in the pipe. Do I need to open an iTunes store account on the computer or can I do it on my iPod ? Thanks.

  • How to Verify the contents of the field is STRING

    Hello All, In START_ROUTINE of Tranfer routine: I would like to verify that a field in DATA_PACKAGE-CUSTNM is string. Because, due to bad data I am finding numeric values, in this field. I would like to remove that record from DATA_PACKAGE, if there

  • Software Update shows no updates for OS X 10.5.8?

    2 years ago my software update stopped showing available software for me to download. I tried to download the necessary programs manually from the website and I recall receiving some message about how my system did not support the latest software, I'

  • Bits (bitvector) Attributes on integer...

    Well... i wish to have certain attributes in an object (integer). I want to be able to easily do: setbit(blabla) removebit(blabla) isset(bblabla) A "flag" could have for example FLAG0 = (1 << 0) Flag10 = (1 << 10) Then do setbit(FLAG0) on the object

  • Installing new pkgs from cd usb memory

    Hi i,m looking for help installing pkgs (tar) i hav downloaded to memory stick, i need to know how to install them on solaris10 x86 basically commands in terminal