Weblogic 8.1 Server log size increase in Production environment

Hi,
Issue:: One of the log file is increasing in size and exceeding beyond the size mentioned in the configuration file resulting in application outage.
Issue description:
We are having problems with the log size in the Weblogic 8.1 server. The fileminsize has been mentioned in the config.xml.
New log files like MYsvr.log00001,MYsvr.log00002, MYsvr.log00003, MYsvr.log00004 etc are also being generated appropriately when the max file size has been reached. But simultaneously, one of the files is growing in size, exceeding the limit mentioned in the configuration file. Eg.. the MYsvr.log00001 file is 800MB in size while the other files(MYsvr.log00002, MYsvr.log00003 etc are 10MB in size)
This increase in size of the log has been resulting in an application outage.
More Details:
1. Server: BEA Weblogic 8.1 server
2. Log size is fine in other environements. This is a problem only in the production environment.
3. The entry in the config.xml is as follows:
<Server ListenPort="6313" Name="MYsvr" NativeIOEnabled="true" TransactionLogFilePrefix="./">
<ServerStart Name="MYsvr"/>
<Log FileMinSize="10000" FileName="MYsvr.log" Name="MYsvr"
NumberOfFilesLimited="true" RotationType="bySize"/>
<SSL Name="MYsvr"/>
<ServerDebug Name="MYsvr"/>
<WebServer Name="MYsvr"/>
<ExecuteQueue Name="default" ThreadCount="15"/>
<KernelDebug Name="MYsvr"/>
</Server>
Could you please help with this issue ?
Thank you.

Can someone please provide a solution for the issue

Similar Messages

SQLSERVER 2012 LOG SIZE INCREASE EXTENSIVELY

Hi Friends,
I want to inquire, as our sqlserver 2012 in full recovery mode , I notices whenever we are executing rebuild indexes maintenancejob the logfile grown up extensively every time. h
thank you.
regards,
asad

Hi Friends,
I want to inquire, as our sqlserver 2012 in full recovery mode , I notices whenever we are executing rebuild indexes maintenancejob the logfile grown up extensively every time. h
Asad,
Why are you posting same thread about SQL Server log file every time. I can see all your previous threads on same Log file issue.
This clearly shows that you don't spend event single moment reading links posted as answer. Why dont you go and read about SQL Server before asking *almost* same question every time.
Yes log file will grow that is default behavior why are you executing index rebuild for all index. Did you searched about index rebuild and how it works and what gets logged.
You can read here
Curious case of logging in Online and offline index rebuild
Use Ola Hallengren solution for index rebuild it will only rebuild index that is fragmented.
Don't just blindly post question spend some time on net searching I am sure you would find lot of articles
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

SQL Logs Size Increasing automatically

Hi,
I am facing a very strange issue in my SQL Server 2008 R2 Logs folder.
Actually in every 10 seconds SQLDump0000,SQLDump0001,..... and so on named files are being created automatically in the Logs folder where SQL stores it's logs.I don't know why is this happening.
Due to this issue logs folder size is increased to 160GB and my c drive where windows is installed is keep showing Low space message in fact 0MB space is showing.
Please help urgently.

Hi,
I am facing a very strange issue in my SQL Server 2008 R2 Logs folder.
Actually in every 10 seconds SQLDump0000,SQLDump0001,..... and so on named files are being created automatically in the Logs folder where SQL stores it's logs.I don't know why is this happening.
Due to this issue logs folder size is increased to 160GB and my c drive where windows is installed is keep showing Low space message in fact 0MB space is showing.
Please help urgently.
Hello Zubair,
This dumps are getting created due to some issue SQL server is facing.Its not a SQL Server transaction log file dump.I guess your system is not updated to latest Service pack.
Latest Service Pack for SQL server 2008 R2 is SP2.Apply this SP and see if this dump generation subsides.If not you need to raise a case with Microsoft to get these dumps analyzed.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Slow inserts after log size increase

I have an app that does 10k-50k consecutive SELECTs and INSERTs as part of a loading operation. Recently, I enlarged the redo logs from 10M to 100M, which appears about right, based on the frequency of log switches (half a dozen/day). Trouble is, now the load takes 5 times longer (20-25 min vs. 5). Any thoughts? I thought redo logs that were too small caused poor performance, b/c of increased checkpoint activity, but I can't imagine why larger redo logs would slow inserts down.
Rob

Logically the only difference a larger online redo log should make is that the number of checkpoints invoked due to log switches should decrease. But a larger online redo log will take longer to archive.
Where did you place the larger online redo log and where does the archive redo log go to? Is this performance decrease consistent or does it appear when certain redo logs are in use?
Even if your logical disk are different it could be the physical disk for some of your files are now the same where before this was not true.
The suggested statspack is probably a good place to start but you might also want to take some OS IO stats during the run also.
HTH -- Mark D Powell --

Do I need to set system env variables for weblogic and SOA server installation?

Hi All,
   I already have two weblogic application servers on my machine(that were installed by others).
I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
    I want to install weblogic and SOA server installation.
So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
Please guide me on this to installl SOA suite .
Thanks in advance

Hi All,
   I already have two weblogic application servers on my machine(that were installed by others).
I observed some environment variables were also set in System variables(ORACLE_HOME,WEB_SERVER_HOME etc) section in Env variables section(Start Menu---> Computer --> properties ---).But why do we need to have system environment variables wherein we already have those variables in files like setDomainEnv.bat or/and setSOADoaminEnv.bat for each server.
And one more thing system variables will be applicable for all servers(the whole machine) right.It may spoil the installation of new servers and present servers as variables should be unique to each server.
    I want to install weblogic and SOA server installation.
So Can I remove the existing system variables(as they will applicable for every server) and install weblogic and SOA server installation without setting up the environment variables?
Especially I have multiple Weblogic servers,In that case how it would be to have environment variables(JAVA_HOME,WL_HOME,ORACLE_HOME etc)?
Please guide me on this to installl SOA suite .
Thanks in advance

How to Increase database / log size of mirrored database

Hi All,
I have been asked to increase the default database and log size of two databases, both of which are mirrored.
I have been trying to find out what else I need to do in this case other than the standard resizing.
Are there extra steps I need to perform as these dbs are mirrored (SQL Mirroring)?
Farren

Hi Farren,
Based on my test, if you choose to expand the mirrored database by increasing the size of an existing data or log file, you can directly execute the ALTER DATABASE statement on the Principal server as Uri’s post, but before that please make sure the mirroring
status is synchronized. You can check the mirroring configuration and partner status with the following query.
SELECT DB_NAME(DATABASE_ID) 'DBNAME',mirroring_state,
mirroring_state_desc,mirroring_role,mirroring_role_desc,
mirroring_partner_name,mirroring_partner_instance
FROM sys.database_mirroring
WHERE mirroring_guid IS NOT NULL
However, if you choose to expand the mirrored database by adding a new file to the database, you need to perform extra steps as follows.
   1. Check the mirroring configuration and partner status with above query.
   2. Run the below command on the principal server to break the mirror.
ALTER DATABASE DatabaseName SET PARTNER OFF
   3. Create your database file on the principal server.
   4. Run a log backup on the principal server.
   5. Restore this log backup on the mirrored server using the NORECOVERY and MOVE options.
   6. Re-establish mirroring between the servers for this database.
Reference:
Increase the Size of a Database
How to add a database file to a mirrored SQL Server database
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

WebLogic 10.3.2.0 hanging at startup after "The server log file is opened."

Hi,
A WebLogic 10.3.2.0 server is hanging at startup. There are no error messages. The last command in the startup window is:
"The server log file <log file dest> is opened. All server side log events will be written to this file."
I think the next line should be:
"Security initializing using security realm realm."
Any ideas on what could be the issue? For instance what resources should be accessed at that point of time? There is sufficient space left on the (virtual machine) disk. The VM configured with 8GB memory. Could it be performance related still?
Following is written to the log file:
####<12.aug.2010 kl 09.47 CEST> <Info> <WebLogicServer> <oim> <> <Main Thread> <> <> <> <1281599254656> <BEA-000214> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.> ####<12.aug.2010 kl 09.47 CEST> <Notice> <Log Management> <oim> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1281599255312> <BEA-170019> <The server log file ....logs\AdminServer.log is opened. All server side log events will be written to this file.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Log Management> <oim> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1281599255390> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Diagnostics> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599255671> <BEA-320001> <The ServerDebug service initialized successfully.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Store> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599256515> <BEA-280050> <Persistent store "WLS_DIAGNOSTICS" opened: directory="....s\domains\oim\servers\AdminServer\data\store\diagnostics" writePolicy="Disabled" blockSize=512 directIO=false driver="wlfileio2"> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "t3" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "t3s" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "http" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "https" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "iiop" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "iiops" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "ldap" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "ldaps" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257187> <BEA-002622> <The protocol "cluster" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257187> <BEA-002622> <The protocol "clusters" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002622> <The protocol "snmp" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002622> <The protocol "admin" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002624> <The administration protocol is "t3s" and is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <RJVM> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257468> <BEA-000570> <Network Configuration for Channel "AdminServer"
Listen Address          :7001
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257687> <BEA-002609> <Channel Service initialized.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258000> <BEA-000406> <NTSocketMuxer was built on Jan 13 2005 17:47:03
####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258078> <BEA-000436> <Allocating 3 reader threads.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258078> <BEA-000446> <Native IO Enabled.> ####<12.aug.2010 kl 09.47 CEST> <Info> <IIOP> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599259500> <BEA-002014> <IIOP subsystem enabled.>
Thanks!!

tried both of these, still having same error as below:
<Sep 8, 2010 1:32:37 PM IST> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Sep 8, 2010 1:32:37 PM IST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User weblogic2 javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic2 denied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:250)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Sep 8, 2010 1:32:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Sep 8, 2010 1:32:37 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Sep 8, 2010 1:32:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Pls help me out ASAP...

Exception in Server Logs : JMSCC0033 While using Weblogic 10.3.X and MQ 7

Following exception is contuniously occuring in Weblogic Managed Server Logs after migrating to IBM MQ 7.
com.ibm.msg.client.jms.DetailedIllegalStateException: JMSCC0033: A synchronous method call is not permitted when a session is being used asynchronously: 'acknowledge' The JMS specification does not permit the use of a session for synchronous methods when asynchronous message delivery is running. Create a separate session if you wish to use both synchronous methods and asynchronous delivery simultaneously.
     at sun.reflect.GeneratedConstructorAccessor43.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:516)
     at com.ibm.msg.client.commonservices.j2se.NLSServices.createException(NLSServices.java:313)
     at com.ibm.msg.client.commonservices.nls.NLSServices.createException(NLSServices.java:388)
     at com.ibm.msg.client.jms.internal.JmsErrorUtils.createException(JmsErrorUtils.java:104)
     at com.ibm.msg.client.jms.internal.JmsSessionImpl.checkSynchronousUsage(JmsSessionImpl.java:2375)
     at com.ibm.msg.client.jms.internal.JmsMessageImpl.acknowledge(JmsMessageImpl.java:1559)
     at com.ibm.jms.JMSMessage.acknowledge(JMSMessage.java:351)
     at weblogic.ejb.container.internal.MDListener$MDMessage.acknowledge(MDListener.java:802)
     at weblogic.ejb.container.internal.MDListener$1.run(MDListener.java:237)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.ejb.container.internal.JMSConnectionPoller.doPrivilegedJMSAction(JMSConnectionPoller.java:2473)
     at weblogic.ejb.container.internal.MDListener.putListener(MDListener.java:234)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:687)
     at weblogic.ejb.container.internal.MDListener.run(MDListener.java:744)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

You should check with IBM Support.
http://www-01.ibm.com/support/docview.wss?uid=swg1IZ73363
-Akshay

Why size of archive log file increasing in merge clause

my database is running in archive log mode.
someone is running oracle merge statement. still it is running.
He will issue commit after the operation.
in that period redolog file increasing now.
my question is why size of archive log file increasing with redolog file.
i know that after commit archive log file should generate.(may be it is wrong).
please suggest........
Edited by: 855516 on Mar 13, 2012 11:18 AM

855516 wrote:
my database is running in archive log mode.
someone is running oracle merge statement. still it is running.
He will issue commit after the operation.
in that period redolog file increasing now.
my question is why size of archive log file increasing with redolog file.
i know that after commit archive log file should generate.(may be it is wrong). No this is not correct that after commit archive log will generate....You know merge statement causes the insert (if data not present already) or update if database is present.. Obviously these operation will generate lots of redo if the amount of data been processed is high.
If you feel that this operation is causing excessive of redo then root cause analysis should be done...
For that use Logminer (excellent tool to provide segment level breakdown of redo size). V$logmnr_contens has columns redo block and redo byte address associated with the current redo
change
There are some gudlines in order to reduce redos( which may vary in any environment)
1) check if there are unwanted indexes being used in tables which are refereed in merge. If yes then remove those could bring down the redo
2) Use global temporary tables to reduce redo (if there is a need to keep data only temporarily in a session)
3) Use nologging if possible (but see its implications)
Hope this helps

SSIS 2008 Rebuild Index Task increasing Log Size

I am testing SSIS 2008 Rebuild Index Task on a single database (db1). I shrank the
db1's log file to initial size. I also checked the box Sort results in tempdb on the SSIS package.
However, when I run the package, db1's log file size increased about 55 times the original size.
When I run a rebuild of all the index on db1
with (sort_in_tempdb=ON) ; there was only a slight increase in the log file size ( did not even double the initial size).
Is this a SSIS bug? The check box is not actually sorting in tempdb?

I am testing SSIS 2008 Rebuild Index Task on a single database (db1). I shrank the
db1's log file to initial size. I also checked the box Sort results in tempdb on the SSIS package.
However, when I run the package, db1's log file size increased about 55 times the original size.
When I run a rebuild of all the index on db1
with (sort_in_tempdb=ON) ; there was only a slight increase in the log file size ( did not even double the initial size).
Is this a SSIS bug? The check box is not actually sorting in tempdb?
Arthur can you please move this thread in Database engine forum. IMO its what changed from 2008 .Index rebuild is fully logged from 2008 onwards it was previously (in 2005) minimally logged .Refer below link for information regarding same
http://support.microsoft.com/kb/2407439/en-gb
Now about when sort intempdb is used.The intermediate sort results that are used to build the index are stored in tempdb .When you rebuild without sort_in_tempdb ( i guess your data and log file are on same drive) index will utilize disk space on which it
resides so it might seem to you log has increased.Is it so ,am i correct.
What query you used to measure log file size,are you absolutely sure it was log file that increased
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Weblogic server log has null0 error

Hi all,
Is anyone know the problem for null0? Why it will write into weblogic admin log and how to get rid of it.
Thank in advance!
<Nov 30, 2010 3:24:12 PM EST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=WLSServerControlTablePage.>
null0
null0
null0
null0
null0
null0
null0
null0
<Nov 30, 2010 3:32:08 PM EST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=ServerConfigGeneralTabPage&handle=com.bea.console.handles.JMXHandle%28%22com.bea%3AName%3Dsmp_node1_svr%2CType%3DServer%22%29.>
<Nov 30, 2010 3:32:28 PM EST> <Warning> <RMI> <BEA-080003> <RuntimeException thrown by rmi server: weblogic.management.logging.DomainLogHandlerImpl.ping()
java.lang.NullPointerException.
java.lang.NullPointerException
     at weblogic.management.logging.DomainLogHandlerImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)

Hi,
Try to check server log which will available under Domain_Home / servers / <required server > / logs
check log file to get more details.
also check access log whether you HTTP 500 error or not.
Regards,
Kal

I am handling logistics department in a company, i am handling more than 100 calls in a day. But my iPhone 4 have only 100 number call history. How to increase my call log size or kindly suggest a better app for storing 1 month call history..

I am handling logistics department in a company, i am handling more than 100 calls in a day. But my iPhone 4 have only 100 number call history. How to increase my call log size or kindly suggest a better app for storing 1 month call history..

Here's one:
https://itunes.apple.com/us/app/callog/id327883585?mt=8

Weblogic Server Log

Hi,
We have an ADF application being served by weblogic 10.3.5. During the operation of application, sometimes we are getting "Internal Server Error" .
Weblogic command window is not showing complete log of application process.
So, how can we get the complete log of weblogic, since the time we started server & application. We want to diagnosis the cause of Error.
Also, what may be the cause of "Internal Server Error" ?
Thanks.

Hi,
Try to check server log which will available under Domain_Home / servers / <required server > / logs
check log file to get more details.
also check access log whether you HTTP 500 error or not.
Regards,
Kal

Reading WebLogic Server Logs

Guys,
How can I read the server logs via API ?
Explaining: I wanna see the Weblogic Server Logs thats is displayed in console or server logs. Then I will write a Java code that read theses files via WebLogic API and write it in a JSP page! Is it Possible ?
Thanks in advanced!

Hi,
You can use the Following command to Output the Local/Remote Server Logs...Now in your Java Code Fetch this Output and format it / Display it according to your Need.
java weblogic.Admin -url t3://AdminAddress:7001 -username weblogic -password weblogic SERVERLOG
In the Above command even you can define the Server name as well to Fetch the Logs from Some Managed Servers as well..By default u get Logs for AdminServer.
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com/ (WebLogic Wonders Are Here)

How to config weblogic 10.3.3 server log and domain log?

I need to change the default logging configuration for both server log and the domain log. The server logging configuration (such as limiting the number of retained log files) can be updated in the Admin console. Howerver there are 100 domains running in a weblogic instance, can this be accomplished by updating a configuration file for each domain instead of going through the web interface?
Also, how can I change the domain log configuration? Is there a configuration file or a command line argument for this?
Thanks,
Hong

Hi Hong,
Based on your requirement we have just created a script for you which would full fill your requirement.
Note: Please the below properties files and the WLST script in the same same location
"*domain.properties*"
domain.count=2
rotationType=bySize
numberOfFilesLimited=yes
fileMinSize=3000
rotateLogOnStartup=yes
fileCount=5
### Domain-1 Details ###
domain.1.name=Domain_7001
domain.1.admin.url=t3://10.10.10.10:7001
domain.1.admin.username=weblogic
domain.1.admin.password=weblogic
domain.1.server.count=2
domain.1.server.1.name=AdminServer
domain.1.server.2.name=MS-1
### Domain-2 Details ###
domain.2.name=Test_Domain
domain.2.admin.url=t3://20.20.20.20:8001
domain.2.admin.username=weblogic
domain.2.admin.password=weblogic
domain.2.server.count=2
domain.2.server.1.name=AdminServer
domain.2.server.2.name=MS-1 Below is the WLST script "*domainLogConfigurtionChange.py*" which would use the above properties file.
# @author Copyright (c) 2010 - 2011 by Middleware Maigc, All Rights Reserved.
from java.io import FileInputStream
propInputStream = FileInputStream("domain.properties")
configProps = Properties()
configProps.load(propInputStream)
totalNumbersofDomains=configProps.get("domain.count")
rotationType=configProps.get("rotationType")
numberOfFilesLimited=configProps.get("numberOfFilesLimited")
fileMinSize=configProps.get("fileMinSize")
rotateLogOnStartup=configProps.get("rotateLogOnStartup")
fileCount=configProps.get("fileCount")
def str2bool(v):
     return v.lower() in ("yes", "true", "t", "1")
domainTmpCount=1
while (domainTmpCount <= int(totalNumbersofDomains)) :
     domainName = configProps.get("domain."+ str(domainTmpCount)+".name")
     domainAdminUrl = configProps.get("domain."+ str(domainTmpCount)+".admin.url")
     domainAdminUserName = configProps.get("domain."+ str(domainTmpCount)+".admin.username")
     domainAdminPassword = configProps.get("domain."+ str(domainTmpCount)+".admin.password")
     serverTmpCount = configProps.get("domain."+ str(domainTmpCount)+".server.count")
     connect(domainAdminUserName, domainAdminPassword, domainAdminUrl)
     print '==============================================='
     print 'Changing Log Settings For Domain....', domainName
     print '==============================================='
     serverTmpCount=1
     while (serverTmpCount <= int(totalNumbersofDomains)) :
          edit()
          startEdit()
          serverName = configProps.get("domain."+ str(domainTmpCount)+".server."+ str(serverTmpCount)+".name")
          print 'Changing Log Setting for serverName: ' , serverName
          cd('/Servers/' + serverName + '/Log/' + serverName)
          cmo.setRotationType(rotationType)
          x = str2bool(numberOfFilesLimited)
          cmo.setNumberOfFilesLimited(x)
          cmo.setFileMinSize(int(fileMinSize))
          cmo.setRotateLogOnStartup(str2bool(rotateLogOnStartup))
          cmo.setFileCount(int(fileCount))
          cmo.setFileName('logs/' + serverName + '.log')
          activate()
          serverTmpCount = serverTmpCount +1
     domainTmpCount = domainTmpCount +1 For more information on how these WLST scripts can be used please refer to the following link
Topic: WLST
http://middlewaremagic.com/weblogic/?page_id=1492
Regards,
Ravish Mody

Weblogic 8.1 Server log size increase in Production environment

Similar Messages

Maybe you are looking for