Sharepoint Integration with Reader not working?

Hi
Since upgrading reader to version 11, i no longer get popups asking to check out a pdf docwhich gets opened via sharepoint 2013.
Once opened, there is no longer the "Sharepoint/Office 365 Server" option available in the "File" menu item.
If I choose "File"-"Open" and paste the url of the file, and then open, I do get the prompt to "Checkout".
Any ideas on why this is not working from Internet Explorer directly.

Hi seanl_1111,
When was the last time it was working fine?
What type of access you have on the SharePoint site?
Regards,
Ajlan Huda.

Similar Messages

CRM 2007 Integration with Lotus Notes 8.0 (Groupware Integration)

Hi
We are doing CRM 2007 Integration with Lotus Notes 8.0. So i need your help in this regard.I have the following documents with me.....
a) SAP CRM Groupware Connector Relase 4.0 (Installation Guide)
b) SAP CRM Groupware Connector Relase 4.0 (Administrative Guide)               c) MapBox 4.0 sp 11             &
d) Groupware Integration installation Guide.
We have started with Groupware connector Release 4.0 Installation guide
We stucked at
5.3 Installing Lotus Domino Groupware Connector
Procedure
1. Log on to your host using prepared Groupware Connector's administrative account.
2. Launch setup.exe
3. Click Next on the Welcome screen.
4. Read the text on the Installation Prerequisites screen and check if your computer meets all the software
and hardware requirements. If yes, press Next.
5. Select the type of SAP Groupware Connector you want to install. Check if you want to install instance of
Default Groupware Connector Proxy. Then press Next, wait while setup routine detects required
software.*
Now my questions are....
1. Where will this setup.exe come from?
2. Do we need to install the things in the same mannare listed above a,b,c,d?
3. As we are implementing CRM 2007, i hope we dont need install Mapbox.
Please help me in successfull Integration.
Thanks in Advance,
Ajay.

Hi Peter & Stephen
Thank your very much for quicke replies.
Peter in one of the messages Martin Dauer wrote the following recently on Oct 23 08. , so do you want me to confirm once again before proceeding further.
Re: Link between sap crm 2007 with lotus 8
Posted: Oct 23, 2008 10:30 PM    in response to: Naveen Raju       E-mail this message      Reply
Hi Naveen,
thanks for your detailed description. This is exactly the way how the Client GWI is getting set up. one little remark from my side on the steps.
The user field are not required to be filled if you use Lotus Notes. this is only for the case of MS Outlook where you can start the synch from the OL Screen as well.
The password field is not used with either groupware system. So you leave it blank and with the first replication run you are asked to type (and maybe save) your password. it is there as the application is shared with Mobiel sales as well and therfore we could not get rid of it.
Supported platforms
In general both the server and client GWI were tested with Lotus 8.0 and CRM 7.0.
For server GWI Domino 8 is already supported for greater CRM 5.0, so should work with LD 8.0.
The installation guide for GWI is available here ...
http://help.sap.com/saphelp_crm60/helpdata/en/44/559f3699d908fae10000000a422035/frameset.htm
I case of further issues pls contact me by mail or to this post.
best regards.
Martin
Thanks & Regards
Ajay

My sd reader not working on my macpro anymore

My Sd reader not working on my mac pro anymore?

i am having the same problem with my new macbook pro i had to go get a USB SD reader

Since installing Yosemite, Airplay with Freebox not working

Since installing Yosemite, Airplay with Freebox not working
With Maverick Airplay working well

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite
Try deleting the printer and scanner and add them back.
Also try Applications/Image Capture to see if it can find the printer and scanner.

Wifi connection with 4s not working after installing new software ios6

wifi connection with 4s not working after installing ios 6.

Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
Then go to Settings > General > Reset Network Settings and try connecting again when the phone restarts.

Pavilion dv6 sd card reader not working

I have searched the boards and have not found an answer to my built in SD card reader not working any more. It worked fine until a couple weeks ago. When I go to "my computer", the sd card does not show up as an available drive. I have tried several cards with no luck. The cards work fine when I use a USB card reader, just not the built in one.
I checked the driver in device manager - at least the one I believe is the correct one - Realtec PCIE Card Reader.
Any other ideas? It is a pain having to carry around an extra card reader. Thanks for the help
rv9a
This question was solved.
View Solution.

Good morning rv9a.
Prior to the uninstall did the computer make a noise to indicate it recognized the card when you put it in?
You should go ahead and reinstall the specific driver for the card reader just to make sure that doesn't have an effect on the issue. Here is the link for Windows 7 and here is the link for Windows 8.
Another possibility is the the Plug and Play service is deactivated. Try the following to check.
Press the Windows+R keyboard shortcut.
Type "services.msc" into the box and click okay.
Scroll down until you find "Plug and Play" in the list.
Ensure that it is started. If it is not right-click on the service and select Start or Enable.
I'll keep an eye out for your response; have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Sound issues; slow response; usb ports unreliable and sd reader not working

The PC is a HP TouchSmart envy about 18 months old. Soon after purchasing I upgraded to Win 8.1.
About three or four months -ago probably after a Win update was installed- I began to have Sound issues (including not able to conect my external powered speakers any more- they used to work brilliantly and initially no sound at all but I went into settings and changed something and every now and again I have to do that again to get the PC speakers to work) ; slow response; usb ports unreliable, sd reader not working- as well as issues with the internet - the modem actually. It is easier to get on to a tablet and use the internet as my PC can be really slow. As well I have uninstalled Chrome and am using Explorer as this seems a little better but I miss Chrome.
I was advised by tech at Hervey Norman that I had to do a complete system restore but in order to do that I would need the recovery discs from HP? Is that correct? How do I do this?
PS I did not make recovery discs when I first purchased the machine. (Very sad!!!)
Help!!!
Alfriston

Hi again Alfriston,
Thank you for the clarification!
To return your computer's audio back to functional order, I recommend removing the audio driver from the operating system previous to upgrading to Windows 8.1, and installing the driver provided in this link.
If re-installing the driver does not resolve the issue, I suggest following the steps in this document on No Sound from the Speakers (Windows 8).
In regards to the USB ports, I recommend following this resource on Troubleshooting USB Connections (Windows 8), which should help consistently connect your USB devices to your computer.
To prevent your computer from lagging or responding in a slow manner, please follow the step in this document on Resolving Slow System Performance (Windows 8) to help improve the speed and efficiency of the operating system.
To further diagnose the issue with your desktop's SD card reader, I recommend following this resource on Using and Troubleshooting Memory Card Readers (Windows 8).
If your desktop still experiences issues with the audio, USB connections, speed and performance, as well as the SD card reader, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Card reader not working out the box scr 3500?

cac card reader not working out of box scr3500 help

Welcome to discussions Kevin!
I'm sorry to hear that first of all make sure that there is nothing sick on the eye of the camera it self, after that how is the lighting on the room that the computer will be set up? did the green light came on when you're trying to use iSight? i'm asking because the same thing happen to me but it was nothing but bad lighting in my office. If this doen't help call apple asap they should replace your computer with out a problem. Hope this helps good luck!
Miguel

The "alt, ctrl and shift" on the left side of my keyboard keys integrated notebook did not work. What should I do?

The "alt, ctrl and shift" on the left side of my keyboard keys integrated notebook did not work. What should I do?

Hi Luis Fernando Garcia,
Thanks for using Apple Support Communities. This article has troubleshooting for keys not working on your keyboard:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sureMouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, seeUnable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Cheers,
- Ari

I am getting frustrated with Apple not working with Flash player on some of my favorite web sites. Is there any alternative that will work on I-pad instead of flash?

I am getting frustrated with Apple not working with Flash Player on some of my favorite web sites! Is there another alternative to watching these site options on my I-pad?

Flash is not, and probably never will be, supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/ . Plus it would be up to Adobe to make a version of their flash player that works on iOS devices - something which they have never managed to do and which they have now given up on trying to do.
Browser apps such as Skyfire, iSwifter and Puffin 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, so your could try checking there for your sites (and there is the built-in YouTube app).

Fingerprint reader not working and cant drag icons after windows 10 update

fingerprint reader not working and cant drag icons after windows 10 update

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the Windows 10 update, and wanted to assist you! To start, can you please provide me with the Product Number of your notebook? Here is a link you can use that will help you find your Model and Product Number: How Do I Find My Model Number or Product Number? In the meantime, I recommend using the Go back to an earlier build option, in your System Settings:
HP Notebook PCs - Upgrading to Windows 10
Once you are back to your original Operating System, check to see if you are experiencing the same issue. If not, then you may consider holding off on the Windows 10 update for a few weeks, until drivers can be updated. Please let me know if this information was helpful by clicking the thumbs up below.
Have a great day!

Fingerprint reader not work... windows 8.1

when i recover my system fingerprint reader not work... plss help...

Hi @michaeltamayo18 ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that after doing a recovery your fingerprint reader is not working,
From your screen shot Device Manager is showing no issue with it.
Have you ran the HP Support Assistant to assist with locating HP updates and drivers?
Have you done all your Windows updates?
To assist you I will need some more information.
What exact model of HP notebook do you have? How Do I Find My Model Number or Product Number?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Why does my card reader not work on my iPad since upgrade?

I use my iPad mini to download photos from my camera when I'm on the road. In the summer I bought the "3 in 1 Card Reader Adapter Cable Camera Connection Kit, 3 Port Card Reader for iPad 4 and iPad Mini by Eurekka" and it worked wonderfully. I was able to download photos (jpg and RAW) directly to the iPad and off the camera, and once home it was a flawless upload to my iMac.
However, once I upgraded to iOS 7 last week I get a message saying the device is not supported. What gives? Will this be fixed or will Apple products only accept Apple accessories from now on?

No but I was just trying to find a way in to your help desk. I didn't find
your web page very helpful in this regard.
Douglas Whiteley
In a message dated 10/05/2012 20:43:50 GMT Daylight Time, [email protected]
writes:
Re: why does my adobe reader not work
created by Claudio González
(http://forums.adobe.com/people/Claudio+González) in Adobe Reader - View the full discussion
(http://forums.adobe.com/message/4395059#4395059)

In my macbook pro hdmi, usb & SD card reader not working

In my macbook pro hdmi, usb & sc card reader not working.
i have tried the SRM reset done, till not working started.
Could you please resolve this problem,

Welcome to Apple Support Communities
Simply take it to an Apple Store or reseller if it's in warranty. Your Mac will be repaired or replaced for free because it looks a hardware problem rather than a software issue.
If it's not in warranty, hold Command and R keys while your MacBook is starting up, and reinstall OS X. If it doesn't work, you can't do much more to solve the problem

HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro

My HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro.
In device manager showing that biometric reader is working properly. But actually the finger printer reader is not reading or senseing. It seems like "dummy" part. Please help me to correctly configure step by step for this issue.
thankyou
Hillet
This question was solved.
View Solution.

Have you installed the Validity Sensor Fingerprint driver software for Windows 8.1?
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943811&swItemId=ob_134806_1&swEnvOid=415...
See page 64 in the following Windows 8.1 user manual for Validity Fingerprint setup information
http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=6943810&docId=emr_na-c04371762&docLocale...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Sharepoint Integration with Reader not working?

Similar Messages

Maybe you are looking for