Sharing iWeb Files

A friend of mine lives out of the country and wants my help updating his site. We both work on MACs and have iWeb 9.0. I need to know how he can send me the files for the site for me to work on and then send them back and upload them to the site.
I see there is a domain file in Library> Application Support> iWeb, but I'm hesitant to send this and not sure if I even can.
help!

Can you have more than one domain file? Or will saving a new domain file just overwrite my existing one
Yes you can have more than one domain file. Just rename them to indicate the sites enclosed in them. I use iWebSites to manage over 75 individual sites. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process and move it to another location on your HD until you're satisfied the separation process is completed and what you want.
This lets me edit several sites and only republish the one I want.
This way you put the domain file with the single site in the Dropbox to work on it from two computers. Be sure to read the warning in my tutorial #21 - Managing an iWeb site from multiple Macs with Dropbox.
OT

Similar Messages

Trying to restore previous iWeb files after hard drive was reformatted.

I had to have a clean install on my MacBook last week and had my iWeb files backed up but I'm having trouble figuring out how to import the files or restore iWeb to the way it was. Any thoughts? Or is it just another lack of support and thinking on Apple's part?

No. You just need to have backed up the right files.
iWeb stores info under User/Library/Application Support/domain.sites and it is this domain.sites file that you need to be able to alter anything in iWeb.
If you published your site to a local folder thinking that was a back up, then it is not, as iWeb has no import facility and is unable to open already published html files.
If you don't have your domain.sites file then you'll have to re-build your site again in iWeb.

I had a drive failure and lost the iWeb file along with other things. I did manage to save a lot of user file documents but I don't see or recognize the my iWeb site file. It was on a 15" G4 Titanium pb. I'm trying to find a way, using version 2.0.4

I had a drive failure and lost the iWeb file along with other things.
I did manage to save a lot of user file documents but I don't see or
recognize the iWeb site file. It was on a 15" G4 Titanium pb.
I'm trying to find a way, using version 2.0.4 of iWeb on a different
pb to recover the file into the iWeb app or a way to download the site into iWeb.
There are 6 pages of images and text, and it
would be a task for me to recreate the whole thing again. I did
download the site but I don't know how or if I can get iWeb to see it and open it.
Does anyone have any knowledge about this? The link to my site:
<http://web.mac.com/danauerbach>
Any suggestions will be most appreciated.
dan auerbach
[email protected]

Unfortunately iWeb cannot read or import previously published files, only generate them. You'll have to recreate your site from scratch.
However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
OT

Questions on organizing/sharing music files on 3 PC networked drive

I just added 1Tb network drive to 3 pc home network... I am planning on moving my iTunes music folder from the older, smaller network drive. I exceeded the 160GB size of the old drive when converting all of the WMA losselss files to Apple lossless while maintaining the old WMA files(I still think the Windows Media Player system is superior). With the new addition to our network, I am planning on the 3 pcs sharing music files... (my wife has been using iTunes for a while, I have just recently went over to the dark side)
What is the best way to organize the files??
-How to shuffle all without the folder of Christmas & Holiday music playing.
-Segregate each users individual files.
Any advice or suggestions are appreciated, I know it would save a lot of time and pain instead of the trial and error method.

Thanks, Jason & Mike. This is how I resolved the problem. Turned out the disk with the data was in NTFS format. Neither my eMac nor my wife's Carbon iMac (prehistoric, in other words) was able to read it, on repeated attempts. In process I discovered (to my surprise) that the external hard drive attached to my eMac (a 320 Gig My Book) was formatted in FAT 32 format, and that the PC laptop (Thinkpad) read from it, and wrote to it, without any problem. (Is FAT 32 less than optimal for use with a pre-Intel Mac?). So I just copied the needed files from the NTFS disk to the FAT 32 disk, via the Thinkpad. When I reconnected the FAT 32 drive to the eMac, it turned out that it was easy [with some fiddling] to put the titles of the new music into the iTunes Library, without having to copy the music itself into iTunes. Making playlists does still seem to have to go manually. Sometimes the "New Playlist from Selection" option automatically gives a name (the original name) to the album from which the music came, sometimes it doesn't. Rationale not clear to me. Other problem: often the sequence is jumbled (this is after I added the whole collection of folders containing music to my iTunes Library in one fell swoop). Usually it was possible to correct this by copying track names for albums one album at a time from the external HD (in Columns view, selecting all the tracks in each folder simultaneously) directly into the playlist; the playlist name then always had to be copied or typed in separately. I don't know if I'm missing an easier route. Also, I see that I have version 4.7.1 of iTunes - I'll download a newer version! Don't know whether newer version will affect what I want to do in a positive sense.

In iMovie when I try to share a project to a file on an external hard drive it will work the first time but subsequently it says it is sharing but gives no time and file name and in fact just sits there not sharing the file.

I have iMovie 10.0.4. I want to transfer some old DV tape videos to MPEG 4 files to be stored on a 4 TB external drive. I successfully imported the video to iMovie, created a project by moving all captured files into a project and the first time I shared the project to a file it worked as expected. Every subsequent try to transfer another video would fail to transfer. When I clicked save it gives the warning that it is too big for iCloud, iso I click create on this computer. The progress circle comes up with no indication of progress. The show activity drop down just says sharing to "file" no file name as in the first one and indicates no time remaining. In fact it just sits there apparently doing nothing. I'v tried it a half dozen times, deleted everything and started over. It transfers the first project to file and then nothing on additional tries. What do I have wrong, am I missing something?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

How do I Import my iWeb Files from one Mac to Another

I have iWeb files that are on one Mac and want to import to another Mac.
How do I do this with having one domain file, completely erase the other domain file that has different files?
This is BRUTAL trying to move, copy and import iWeb files between family Macs!!!

You are actually better to split your domain file so that each site can be loaded individually into iWeb and published separately. See....
http://iwebfaq.org/site/iWebMultiplewebsites.html
You'll note from this that you can also use a third party application to handle these file and iWebsites used to have a merge function. I don't use it so I don't know if it works with the latest version of iWeb.

Screen sharing and file sharing not working on LAN

This is not a Mavericks specific problem since it existed before I upgraded to Mavericks. I have a LAN that consists of 3 MBPs and 1 MacPro.
Local screen sharing and file sharing works fine on all of these computers except for one MBP. From this MBP I am able to connect to all of the other computers for screen sharing and file sharing. But I can't connect to this particular MBP for screen sharing or file sharing from any of the other Macs.
This MBP shows up in the left hand side column under "Shared" on all the other computers. But I am unable to make a connection from any computer to the problematic MBP. I get the message, "There was a problem connecting to the server "xxxxxxxx". The server may not exist or is unavailable at this time".
I have tried toggling off and on screen sharing and file sharing with no effect. One probably pertinent strange thing that I notice is that under the Screen Sharing set up the green button next to "Screen Sharing:On" is green. But the message under it states:
"Other users can access your computer's screen
at vnc://johnmacbookproretina/ or by looking for “John MacBook Pro” in the Finder sidebar."
The problem is that my computer name is "John MacBook Pro" and the LocalHostName is "JohnMBPr.local". I believe that at some point in the past the computer name and/or LocalHostName was "johnmacbookproretina".
Similiarly, under File Sharing I am informed:
"Other users can access shared folders on this computer, and administrators all volumes, at “afp://johnmacbookproretina” or “smb://johnmacbookproretina”."
I would appreciate any help I could get to resolve this perplexing issue. Thanks.
John

I've finally been able to solve my own problem.
File sharing and screen sharing on the problematic MBP was being blocked by firewall rules that had been set up several weeks ago when I had installed a trial version of DoorStop X firewall software. I had previously trashed the app when the 30 day trial ended. I did not realize that the software had left a set of firewall rules in the Library/StartupItems folder. Among other things, the rules were set to deny access to the computer on the ports used for file sharing and screen sharing. Once I trashed the DoorStopStartup folder in the StartUpItems folder all the connection problems resolved with a computer restart.

No folios or sub tile in shared IPA file

This is a follow on to Chris Huber's question posted at 7:52 am today. He has resolved his library view issues and successfully downloaded two folios to his iPad mini. He has emailed me the newest IPA file to test on my iPad Air.
I now have the same problems he earlier encountered. The app downloads to Newsstand, but there is no subscription tile or folios showing up in the library view. The splash screen launches, but then the library view is empty. I am syncing per the guidelines, as I've done many times before on the apps that I have built, but no luck with the shared IPA file.
Any suggestions?
Thanks,
Steve

Bart,
Here is the link to Chris Huber's original question:
http://forums.adobe.com/message/6304522#6304522
I am using the same .ipa file, sent to me via email, on an iPad Air versus his Mini.
Steve

Error 0(Native: listNetInterfaces:[3]) and error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

Hi Gurus,
I'm trying to upgrade my test 9.2.0.8 rac to 10.1 rac. I cannot upgrade to 10.2 because of RAM limitations on my test RAC. 10.1 Clusterware software was successfully installed and the daemons are up with OCR and voting disk created. Then during the installation of RAC software at the end, root.sh needs to be run. When I run root.sh, it gave the error: while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory. I have libpthread.so.0 in /lib. I looked up on metalink and found Doc ID: 414163.1 . I unset the LD_ASSUME_KERNEL in vipca (unsetting of LD_ASSUME_KERNEL was not required in srvctl because there was no LD_ASSUME_KERNEL in srvctl). Then I tried to run vipca manually. I receive the following error: Error 0(Native: listNetInterfaces:[3]). I'm able to see xclock and xeyes. So its not a problem with x.
OS: OEL5 32 bit
oifcfg iflist
eth0 192.168.2.0
eth1 10.0.0.0
oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth1 10.1.1.0 global cluster_interconnect
eth0 192.168.2.0 global public
cat /etc/hosts
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
My questions are:
should ping on sunny1vip and sunny2vip be already working? As of now they dont work.
if you look at oifcfg getif, I initially had eth1 10.0.0.0 global cluster_interconnect,eth0 192.168.2.0 global public then I created eth1 10.1.1.0 global cluster_interconnect with setif. Should it be 10.1.1.0 or 10.0.0.0. I looked at the subnet calculator and it says for 10.1.1.1, 10.0.0.0 is the subnet. In metalink they had used 10.10.10.0 and hence I used 10.1.1.0
Any ideas on resolving this issue would be very much appreciated. I had been searching on oracle forums, google, metalink but all of them refer to DOC Id 414163.1 but it does n't seem to work. Please help. Thanks in advance.
Edited by: ayyappa on Aug 20, 2009 10:13 AM
Edited by: ayyappa on Aug 20, 2009 10:14 AM
Edited by: ayyappa on Aug 20, 2009 10:15 AM

a step forward towards resolution but i need some help from the gurus.
root# cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
192.168.2.3 sunny1pub.ezhome.com sunny1pub
192.168.2.4 sunny2pub.ezhome.com sunny2pub
10.1.1.1 sunny1prv.ezhome.com sunny1prv
10.1.1.2 sunny2prv.ezhome.com sunny2prv
192.168.2.33 sunny1vip.ezhome.com sunny1vip
192.168.2.44 sunny2vip.ezhome.com sunny2vip
root# /u01/app/oracle/product/crs/bin/oifcfg iflist
eth1 10.0.0.0
eth0 192.168.2.0
root# /u01/app/oracle/product/crs/bin/oifcfg getif
eth1 10.0.0.0 global cluster_interconnect
eth0 191.168.2.0 global public
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
****ORACLE_HOME environment variable not set!
ORACLE_HOME should be set to the main directory that contain oracle products. set and export ORACLE_HOME, then re-run.
root# export ORACLE_BASE=/u01/app/oracle
root# export ORACLE_HOME=/u01/app/oracle/product/10.1.0/Db_1
root# export ORA_CRS_HOME=/u01/app/oracle/product/crs
root# export PATH=$PATH:$ORACLE_HOME/bin
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP does not exist.
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny1pub -o $ORACLE_HOME -A 192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl add nodeapps -n sunny2pub -o $ORACLE_HOME -A 192.168.2.44/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny1pub -a
VIP exists.: sunny1vip.ezhome.com/192.168.2.33/255.255.255.0
root# /u01/app/oracle/product/10.1.0/Db_1/bin/srvctl config nodeapps -n sunny2pub -a
VIP exists.: sunny2vip.ezhome.com/192.168.2.44/255.255.255.0
Once I execute the add nodeapps command as root on node 1, I was able to get vip exists for config nodeapps on node 2. The above 2 statements resulted me with same values on both nodes. After this I executed root.sh on both nodes, I did not receive any errors. It said CRS resources are already configured.
My questions to the gurus are as follows:
Should ping on vip work? It does not work now.
srvctl status nodeapps -n sunny1pub(same result for sunny2pub)
VIP is not running on node: sunny1pub
GSD is not running on node: sunny1pub
PRKO-2016 : Error in checking condition of listener on node: sunny1pub
ONS daemon is not running on node: sunny1pub
[root@sunny1pub ~]# /u01/app/oracle/product/crs/bin/crs_stat -t
Name Type Target State Host
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
ora....pub.gsd application OFFLINE OFFLINE
ora....pub.ons application OFFLINE OFFLINE
ora....pub.vip application OFFLINE OFFLINE
Will crs_stat and srvctl status nodeapps -n sunny1pub work after I upgrade my database or should they be working now already? I just choose to install 10.1.0.3 software and after running root.sh on both nodes, I clicked ok and then the End of installation screen appeared. Under installed products, I see 9i home, 10g home, crs home. Under 10g home and crs home, I see cluster nodes(sunny1pub and sunny2pub) So it looks like the 10g software is installed.

Cannot open shared object file: on Informatica Power Centre(8.1.1) Installa

Hi Friends,
I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
My OS is Redhat Linux (64 bit).
What's the issue?
onfiguring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
Regards,
DB

Hi;
I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
If you run appstier be sure you source env file with applmgr user
Regard
Helios

Cannot open shared object file: on Informatica Power Centre Installation

Hi Friends,
I am trying to install Informatica Power Centre 8.1.1 and when i invoke the installet it' giving below error:
My OS is Redhat Linux (64 bit).
What's the issue?
onfiguring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.28135/Linux/resource/jre/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
[oracle@obidb PowerCenter_8.1.1_SE_for_Linux_x64_64Bit]$
Regards,
DB

Hi;
I am in the process of installing R12.1.1 on RHEL5(64-bit). All the pre-req have been done.. I did the installation twice but I am facing the same issue. When i try to run adconfig.sh on the appsTier. i get the following errorYou want to run adconfig.sh on appstier or dbtier?
If you run appstier be sure you source env file with applmgr user
Regard
Helios

Upgraded 2 macs to Mavericks, can no longer access shared folders/files.

So I upgraded my Macbook Pro, and Mac Mini to Mavericks today, and previously when they were both on mountain lion I could access the shared folders/files and screen share with absolutely no issue whatsoever.
But upon updating to Mavericks today it all broke.
Both computers were running the OS X Server software on Mountain Lion, and I went ahead and purchased/installed the new edition of server that came out today.
I can see the other mac under the "Shared" option in Finder's sidebar, but when I try to open the other mac it says connection failed and offers to "connect as"
As I usually do, I connect as and it asks for the login credentials. I put in the same credentials as before, 150% sure they're right, in the text boxes that I used before, but it won't allow me to connect to the mac.
I know beyond a shadow of a doubt that they're the right credentials.
I thought it may have been just a wonky permissions error so I unshared the folders and reshared using the same permissions that had worked before.
I've been working on it for about 3 hours now so any help would be appreciated.

I upgraded my two machines - now when I access files on the "shared" storage array (a thunderbolt, pegasus array) across the network (ethernet) if I modify the file (for instance, a jpg) and then go to save I get a "you don't have permissions to etc...." and then when I just close the file without saving - it disappears from my file server permanently! even if I go to the machine hooked up to the array the file is "gone" - unbelievable. I have updated permissions where I can, deleted and added the sharing for users, tried SMB and AFP, and even downgraded the "sharing" machine back to OSX 10.8 where it was working fine but the client machine still is doing this where it can connect, see all the files, but as soon as I modify a file I get the warning and bam, it's gone forever....
Wow - this is a doozy. I don't have a fix but WARNING - watch out as you are working on this problem that your files are being vanished permanently.

Time Machine and iWeb file

I have used time machine for weeks. Yesterday I deleted an iWeb file I was preparing for publishing and decided I wanted to do it differently. Now I want to restore the iWeb file I had 2 days ago.
How do I find that file in Time Machine? I have no idea where it resides on my HD either.

quit iweb and restore the contents of the directory /users/username/library/application support/iweb.

Hi! I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is

Hi!
I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences > sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is listed in "shared folders" but under "users" everything is grayed out (it says "read and write" for "everyone" - but "read and write" is grayed out, and it doesn't let me add or subtract users). Now I can access all of the folders I shared from my imac except for the externalhard drive. What's going on?

Hi RRFS!,thanks for help.I forgot to tell that hard drive has 2 partitions 1:format :Mac OS Extended (Journaled) and that works properly,2:format:MS-DOS (FAT32) and when i "get info" for both :first has shering & permitions:You can read and write - with name and privilege, second has shaing & prermissions:You can read and write- without name and privilege

Moving Iweb files from old hard drive to new laptop

Hi, just replaced my old Powerbook with a new MacBook Pro and I have been sent my old hard drive and fit it in to an enclosure to let me have access to my old pics, music etc but I am struggling to find the iweb files for my websites
I know they were there before it went in for a screen repair and everything else looks ok so just wondered if I am looking in the wrong place
Any help much appreciated
Tony

The primary file you need to move is named Domain.sites (iWeb 2) or Domain.sites2 (iWeb 3). it's locted in your Users/Home/Library/Application Support/iWeb folder. Copy that to the same folder on your new MBP.
However:
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
Once you make the libraries visible you can easily find the file you need and move it into the new library. If you have problems opening the domain file for the first time try the following:
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Sharing iWeb Files

Similar Messages

Maybe you are looking for