Sharing the root file system with file server in windows embedded compact 7

Seems it is not practical. I actually see the share, and the top level files and folders. But I have no access right for the files.
And usb disk's mount point are not listed too. Is there any solution?

I don't recall this problem. How was the share created? Programmatically by your code? What access list did you set? Did you create NTLM users and are you connected from the remote client as one of those users?
I believe that you may have to create a separate share for alternate device mount points under the root (disks, etc.) but I think the basic operation you want should be possible.
Paul T.

Similar Messages

OVMRU_002030E Cannot create OCFS2 file system with local file server: Local FS OVMSRVR. Its server is not in a cluster. [Thu Dec 04 01:33:10 EST 2014]

Hi Guys,
Im trying to create a repository .I have a single node OVM server and have presented two LUN's (Hitachi HUS110 direct attached (via FC))
I've created a server pool and unchecked the clustered server pool. I see the LUN's (physical disk from Oracle Virtual manager) .But when creating the repository i'm having this error
"OVMRU_002030E Cannot create OCFS2 file system with local file server: Local FS OVMSRVR. Its server is not in a cluster. [Thu Dec 04 01:33:10 EST 2014]"
Any steps i missed?Appreciate anyone's input
Regards,
Robert

Hi Robert,
did you actually add the OVS to the server pool, that you created?

Spanned file system with zip

Hi
Is there a way of creating a spanned file system with any of the current zip utilities (Native LabView or OpenG etc.)?
Effectively the result should be z01, z02, etc. This format is something that both WinRAR and WinZIP accomplish, so the output would have to be compatible.
The main issue is when compressing a whole directory. Files are rearranged in such a way that the output of all z01, z02 etc. is of the same size (users choice), and I don't quite know how the files are re-arranged in order to achieve that.
Thanks

OpenG ZIP does not support spanning or stripped datafiles. The
zerotolerance wrote:
First, thanks for your reply.
I actually have a zip utility that compresses strings rather than files. I believe that this utility can be used to create this spanning, but the trouble is it only gives the actual compressed body and not the required headers.
I don't know much about how the headers and how to create them (i.e. the crc32, relative path etc.) in a zip file.
Most likely you just have the deflate algorrtihme in that "ZIP" utility. It is the compression algorithme normally used in ZIP but has nothing to do with ZIP itself. ZLIB is the most commonly used Open Source library for the deflate() algorithme and is also used in the OpenG ZIP library to implement the ZIP functionality. The function ZLIB Deflate.vi in OpenG ZIP exposes this functionality directly and does mthe same.
zerotolerance wrote:
First, thanks for your reply.
But more importantly, how are the files within a directory arranged so that constant zip files (i.e. z01, z02 etc.) come out.
What I mean by this is the convept that WinRAR uses. So, if you have a directory with mixed file sizes in them, and you choose to have split size of 10MB, the output of each compressed file (i.e. z01, z02 etc.) is always 10MB, appart from the last one of course.
Some help in the headers and the rearrangement of files within a nested direcotry would go a long way.
As for the cmd line, I don't like using that feature with labview because its very heavily limited. It does not give any intermitante control when a job is started. Just to see a simple progress as exe runs we have to jump through hoops, i.e. writting the output to file or clipborad and then reading etc. let alone anything else. and I'm also looking to add alot of other small features along the way, i.e. pausing, cancel, resume progress save, etc. So I definatly cannot take this route.
So ZIP uses deflate() to compress the individucal file streams but the ZIP format is about creating management around it that allows to store multiple such streams into one physical file. It is a little like a filesystem inside a file.
Adding Spanning and striping to OpenG ZIP would be possible and most of it could be done in the LabVIEW part of it, but there would also need to be some modifications to the underlaying shared library to support that. The spanning or striping is done in such a way that filestreams are cut up when necessary and continued in the next data file. The unzipping algorithme has then to be smart enough to recognize that and combine the streams again when uncompressing. For that the compression changes various flags in the header for each stream, which is the part where the shared library would need to be modified to allow those changed values to be writting (and also recognized on decompression). All in all quite a serious project undertaking.
Refusing to use command line tools because they are ugly is not really a smart decision.
Under Unix/Linux it is totally normal to do so and it makes the whole unix system very powerful as you don't need to write huge monotlithic monsters that do everything from making coffee, to cleaning the house and making the laundry but simply make a tool for each task and tie them together through command line chaining. Divide and master is the magic here, not not conquer and swallow!
Also you have here the choice to use a command line tool and be done in 5 minutes, or write a tool like OpenG ZIP that took me probably several man months of work over time. Or wait until me or someone else changes OpenG to support this feature which could be 10 years.
Alternatively you can also try to write a LabVIEW library to use the ZIPArchive shared library from http://www.artpol-software.com/ziparchive/KB/0610051553.aspx. But that is likely going to be a similar effort as writing OpenG ZIP was.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to read some images from file system with webdynpro for abap?

Hi,experts,
I want to finish webdynpro for abap program to read some photos from file system. I may make MIMES in the webdynpro component and create photos in the MIMES, but my boss doesn't agree with me using this way. He wish me read these photos from file system.
How to read some images from file system with webdynpro for abap?
Thanks a lot!

Hello Tao,
The parameter
icm/HTTP/file_access_<xx>
may help you to access the pictures without any db-access.
The following two links may help you to understand the other possibilities as well.
The threads are covering BSP, but it should be useful for WebDynpro as well.
/people/mark.finnern/blog/2003/09/23/bsp-programming-handling-of-non-html-documents
http://help.sap.com/saphelp_sm40/helpdata/de/c4/87153a1a5b4c2de10000000a114084/content.htm
Best regards
Christian

Display File System With JTree

Greeting,
Are there any suggestions or example which is about displaying file system with JTree??
Thx Advanced

Just create tree model from your filesystem.
If you like to have fancier look, you may also
create renderer which would show
appropriate icons.
Look to classes
DefaultMutableTreeNode
DefaultTreeModel
( all in the javax.swing.tree )

I tried to manually clear my Time Machine back up drive (a La Cie). But now the Trash is filled with files (over 130,000) and it doesn't seem to want to trash them - how do I get rid of them now in a quicker way?

I tried to manually clear my Time Machine back up drive (a La Cie) of some of the older backups. But now the Trash is filled with files (over 130,000) and it doesn't seem to want to trash them - it's taking forever!! how do I get rid of them now in a quicker way?

dear Sue
i've tried the alt solution to empty trash but it does not work
I still got the -8003 error
for emptying time machine backups that i foolishly put in the trash
i've also tried this solution using terminal and it did not work either
http://www.imore.com/how-force-empty-trash-your-mac-using-terminal
any help you might offer would be greatly appreciated
i am using a 24 inch iMac
OSX 10.6.8
Message was edited by: summer_laughter

Sign on problems within Elements 10; plus cannot backup writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Sign on problems within Elements 10; plus cannot backup, writing files error with file catalog.pse10db. No indication what the problem is. How do I get adobe help with these problems?

Will the current plugins for Sigma DP1/2 RAW files work with files from the DP1/2 Merrill cameras? A

Will the current plugins for Sigma DP1/2 RAW files work with files from the DP1/2 Merrill cameras? And if not, is Adobe developing plugins for these cameras?

Not sure what plugins you mean, Hornet - Lr doesn't rely on plugins to read new cameras.
If you mean the Adobe Camera Raw (ACR) plugin - that's for Photoshop, not Lightroom. Lr has the same functionality as ACR, but it's hard-coded into the program, so if you're looking for support for a new camera, you need to wait for a new version of Lr.
And nobody here can say when Lr support for a given camera will happen.
Hopefully someone with a Merrill will be able to chime in about whether its files work with the current Lr.

The problem is occurred with J2ee server node which is disabled it from MMC

Dear SAP Consultants,
The problem is occurred with J2ee server node which is disabled J2ee server node from MMS Console and the abap work process is working fine but the dispatcher is yellow status and I can login to the abap system but Iu2019m not able to start the j2ee from Tcode u201CSmicmu201D as well
The system parameters are:
BI 7.0 System as ABAP & JAVA add on, windows 2003 on Oracle database, 24 GB Ram
Paging files: Driveu201D Os system: minimum: 1525, maximum: 3048
Driveu201DEu201D application: minimum: 70855, maximum: 70855
I can see the log files as follow:
From dev_disp:
Sun Jun 21 13:10:28 2009
J2EE server info
start = TRUE
state = STARTED
pid = 2892
argv[0] = E:\usr\sap\BWD\DVEBMGS00\exe\jcontrol.EXE
argv[1] = E:\usr\sap\BWD\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=E:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS00_cai-bwdev
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=64990
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=BWD
argv[7] = -DSAPMYNAME=cai-bwdev_BWD_00
argv[8] = -DSAPPROFILE=E:\usr\sap\BWD\SYS\profile\BWD_DVEBMGS00_cai-bwdev
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
DpJ2eeLogin: j2ee state = CONNECTED
Sun Jun 21 13:10:29 2009
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1032
    (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1362) [nixxi.cpp    4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2892)
ERROR => DpProcKill: kill failed [dpntdisp.c   371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Sun Jun 21 13:10:48 2009
DpEnvCheckJ2ee: switch off j2ee start flag
From dev_jcontrol :
[Thr 2124] Sun Jun 21 13:10:29 2009
[Thr 2124] *** ERROR => invalid return code of process [bootstrap] (exitcode = 66) [jstartxx.c   1642]
[Thr 2124] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = 66)
[Thr 2124] JControlCloseProgram: started (exitcode = 66)
[Thr 2124] JControlCloseProgram: good bye... (exitcode = 66)
From dev_bootstrap :
JHVM_BuildArgumentList: main method arguments of node [bootstrap]
-> arg[ 0]: com.sap.engine.bootstrap.Bootstrap
-> arg[ 1]: ./bootstrap
-> arg[ 2]: ID0072573
-> arg[ 3]: -XX:NewSize=57M
-> arg[ 4]: -XX:MaxNewSize=57M
-> arg[ 5]: -Xms256M
-> arg[ 6]: -Xmx256M
-> arg[ 7]: -XX:+DisableExplicitGC
-> arg[ 8]: -verbose:gc
-> arg[ 9]: -Djava.security.policy=.java.policy
-> arg[ 10]: -Djava.security.egd=file:/dev/urandom
-> arg[ 11]: -Djco.jarm=1
[Thr 5216] JLaunchIExitJava: exit hook is called (rc = 66)
[Thr 5216] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 5216] JLaunchCloseProgram: good bye (exitcode = 66)
From server.0.log :
#1.5 #001E4F208703008A0001C7470000092000046A4414D60A1F#1242740546634#/System/Server##com.sap.caf.eu.gp.schedule.impl.ScheduleWorker#J2EE_GUEST#0##n/a##27772ea0447811deb9bf001e4f208703#SAPEngine_Application_Thread[impl:3]_25##0#0#Error#1#com.sap.caf.eu.gp.schedule.impl.ScheduleWorker#Plain###ERROR_ACQUIRE_CONNECTION
com.sap.caf.eu.gp.base.exception.EngineException: ERROR_ACQUIRE_CONNECTION
     at com.sap.caf.eu.gp.base.db.ConnectionPoolJ2EE.getConnection(ConnectionPoolJ2EE.java:92)
     at com.sap.caf.eu.gp.schedule.impl.ScheduleDbImpl.getScheduleToProcess(ScheduleDbImpl.java:1936)
     at com.sap.caf.eu.gp.schedule.impl.ScheduleService.getScheduleToProcess(ScheduleService.java:432)
     at com.sap.caf.eu.gp.schedule.impl.ScheduleWorker.work(ScheduleWorker.java:77)
     at com.sap.caf.eu.gp.schedule.impl.ScheduleWorker.run(ScheduleWorker.java:63)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
cai-bwdev
sapmnt
BWD
SYS
global
security
data
SecStore.properties" does not exist although it should..
     at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:59)
     at com.sap.caf.eu.gp.base.db.ConnectionPoolJ2EE.getConnection(ConnectionPoolJ2EE.java:89)
     ... 8 more
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
cai-bwdev
sapmnt
BWD
SYS
global
security
data
SecStore.properties" does not exist although it should..
     at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:193)
     at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:338)
     at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:267)
     at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:51)
     ... 9 more
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: File "
cai-bwdev
sapmnt
BWD
SYS
global
security
data
SecStore.properties" does not exist although it should..
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:145)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:226)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:197)
     at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:117)
     ... 12 more
Caused by: com.sap.security.core.server.secstorefs.FileMissingException: File "
cai-bwdev
sapmnt
BWD
SYS
global
security
data
SecStore.properties" does not exist although it should.
     at com.sap.security.core.server.secstorefs.StorageHandler.openExistingStore(StorageHandler.java:372)
     at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:1946)
     at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:802)
     at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:783)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:209)
     ... 14 more
Please advice with the right solution,
Regards,
Ahmed

thanks

FILE NAME WITH FILE EXTENTIONS

HI EXPERTS!!
I WANT TO GET THE FULL FILE NAME STRORED IN THE SERVER FOLDER. I USED FM RZL_READ_DIR_LOCAL BUT I AM GETTING ONLY 32 DIGITS OF NAME NOT FULL NAME AND ALSO SIZE PARAMETER IS CONCATENATING WITH NAME.
I WANT THE FILE NAME WITH FILE EXTENTIONS(TXT. .PDF ETC)..
PLZ SUGGEST ME HOW TO GET THE SAME..
PLZ REPLYE ME..
MAHESH

Hi Mahesh,
Try the below FM in the below code.
DATA:
 LV_PERMISSION(10), " Permission
 LV_H2, " H2
 LV_FLNM(13), " File name
 LV_USER(10), " User
 LV_GROUP(10), " Group
 LV_SIZE(15), " Size
 LV_MONTH(3), " Month
 LV_DAY_C(2), " Day
 LV_YEAR(5), " Year
 LV_FILE_NAME TYPE FILE_NAME, " Filename
 LV_JUNK, " Junk
 RETURN_CODE TYPE I. " Return code
DATA:
 CMD_PARAMS LIKE SXPGCOLIST-PARAMETERS,
 " External prg.parameters
 CMD_OUTPUT TYPE BTCXPM OCCURS 0, " Log message
 STATUS TYPE EXTCMDEXEX-STATUS. " Status
CONSTANTS:
 LC_DIR TYPE C VALUE 'd'. " Directory
FIELD-SYMBOLS: <CMD_OUTPUT_LINE> LIKE LINE OF CMD_OUTPUT.
CMD_PARAMS = PV_DIRECTORY.
CLEAR CMD_OUTPUT.
CALL FUNCTION 'SXPG_CALL_SYSTEM'
 EXPORTING
 COMMANDNAME = 'Y_LS_LN'
 ADDITIONAL_PARAMETERS = CMD_PARAMS
 IMPORTING
 STATUS = STATUS
 EXITCODE = RETURN_CODE
 TABLES
 EXEC_PROTOCOL = CMD_OUTPUT
 EXCEPTIONS
 NO_PERMISSION = 1
 COMMAND_NOT_FOUND = 2
 PARAMETERS_TOO_LONG = 3
 SECURITY_RISK = 4
 WRONG_CHECK_CALL_INTERFACE = 5
 PROGRAM_START_ERROR = 6
 PROGRAM_TERMINATION_ERROR = 7
 X_ERROR = 8
 PARAMETER_EXPECTED = 9
 TOO_MANY_PARAMETERS = 10
 ILLEGAL_COMMAND = 11
 OTHERS = 12.
Check Status first then check sy-subrc
CASE SY-SUBRC.
 WHEN 0.
 CASE STATUS.
 WHEN 'F'.
 MESSAGE I057(YS) WITH 'SXPG_CALL_SYSTEM'(002).
 GF_EXIT = GC_TRUE.
 WHEN 'E'.
 MESSAGE I058(YS) WITH 'SXPG_CALL_SYSTEM'(002).
 GF_EXIT = GC_TRUE.
 WHEN 'S'.
 MESSAGE I059(YS) WITH 'SXPG_CALL_SYSTEM'(002).
 GF_EXIT = GC_TRUE.
 WHEN 'C'.
 MESSAGE I061(YS) WITH 'SXPG_CALL_SYSTEM'(002).
 GF_EXIT = GC_TRUE.
 ENDCASE. " CASE STATUS.
 WHEN 1.
 MESSAGE I048(YS) WITH 'SXPG_CALL_SYSTEM'(002).
 GF_EXIT = GC_TRUE.
 WHEN 2.
 MESSAGE I049(YS) WITH 'Y_LS_LN'(003).
 GF_EXIT = GC_TRUE.
 WHEN 3.
 MESSAGE I050(YS) WITH 'SXPG_CALL_SYSTEM'(002).
 GF_EXIT = GC_TRUE.
 WHEN 9.
 MESSAGE I054(YS) WITH 'SXPG_CALL_SYSTEM'(002).
 GF_EXIT = GC_TRUE.
 WHEN 10.
 MESSAGE I055(YS) WITH 'SXPG_CALL_SYSTEM'.
 GF_EXIT = GC_TRUE.
 WHEN 11.
 MESSAGE I056(YS) WITH 'SXPG_CALL_SYSTEM'(002).
 GF_EXIT = GC_TRUE.
 WHEN OTHERS.
 MESSAGE I022(YS) WITH SY-SUBRC.
 GF_EXIT = GC_TRUE.
ENDCASE. " CASE SY-SUBRC.
IF GF_EXIT = ' '.
 READ TABLE CMD_OUTPUT ASSIGNING <CMD_OUTPUT_LINE> INDEX 1.
 IF SY-SUBRC = 0.
 CONDENSE <CMD_OUTPUT_LINE>-MESSAGE.
 IF <CMD_OUTPUT_LINE>-MESSAGE CS 'total' OR
 <CMD_OUTPUT_LINE>-MESSAGE CS 'TOTAL'.
 DELETE CMD_OUTPUT INDEX 1.
 ENDIF.
 ENDIF.
 LOOP AT CMD_OUTPUT ASSIGNING <CMD_OUTPUT_LINE>.
 CONDENSE <CMD_OUTPUT_LINE>-MESSAGE.
 SPLIT <CMD_OUTPUT_LINE>-MESSAGE AT SPACE INTO
 LV_PERMISSION
 LV_H2
 LV_USER
 LV_GROUP
 LV_SIZE
 LV_MONTH
 LV_DAY_C
 LV_YEAR
 LV_FILE_NAME
 LV_JUNK.
 IF LV_PERMISSION(1) = LC_DIR.
 CONTINUE.
 ELSE.
 LV_FLNM = LV_FILE_NAME(13).
 TRANSLATE LV_FLNM TO UPPER CASE.
 IF LV_FLNM = '1W_FIARFUNNEL'.
 PT_FILE-FILE_NAME = LV_FILE_NAME.
 APPEND PT_FILE.
 ENDIF. " IF LV_FLNM = '1D_FIARFUNNEL'.
 ENDIF. " IF lv_permission(1) = ...
 ENDLOOP. " LOOP AT CMD_OUTPUT
ENDIF. " IF GF_EXIT = ' '.

Convert Raw Device to file system based file systems for datafiles [HP-UX]

Hello experts,
Once again in seek of guidance..
I am in the process of migrating my database (Oracle 7.2.3 on HP-UX 10.20 to Oracle 8.1.7 64-bits on HP-UX 11).
Amongst one of our steps is to convert our RAW Device datafiles to File System based files within the same server and version - Oracle 7.2.3 on HP-UX 10.20.
E.g. /dev/vg00/rlvol1 to become /d01/oradata/cmtdb/tbs1.dbf
Is this something possible?
Can i just do the following:
a. Shutdown database (normal)
b. dd if=/dev/vg00/rlvol1 of=/d01/oradata/cmtdb/tbs1.dbf bs=20k
c. chown oracle7:dba /d01/oradata/cmtdb/tbs1.dbf
d. svrmgrl> startup mount
e. alter database rename file '/dev/vg00/rlvol1' to '/d01/oradata/cmtdb/tbs1.dbf'
f. alter database open.
Thanks very much for your replies.
Please tell me about possible problems that i can anticipate.
Best Regards
Yogeeraj

Hello experts,
Once again in seek of guidance..
I am in the process of migrating my database (Oracle 7.2.3 on HP-UX 10.20 to Oracle 8.1.7 64-bits on HP-UX 11).
Amongst one of our steps is to convert our RAW Device datafiles to File System based files within the same server and version - Oracle 7.2.3 on HP-UX 10.20.
E.g. /dev/vg00/rlvol1 to become /d01/oradata/cmtdb/tbs1.dbf
Is this something possible?
Can i just do the following:
a. Shutdown database (normal)
b. dd if=/dev/vg00/rlvol1 of=/d01/oradata/cmtdb/tbs1.dbf bs=20k
c. chown oracle7:dba /d01/oradata/cmtdb/tbs1.dbf
d. svrmgrl> startup mount
e. alter database rename file '/dev/vg00/rlvol1' to '/d01/oradata/cmtdb/tbs1.dbf'
f. alter database open.
Thanks very much for your replies.
Please tell me about possible problems that i can anticipate.
Best Regards
Yogeeraj

Sender File Adapter with file conversion

Hi guys,
Im using a Sender File adapter with file conversion. The message to be processed has a structure with fixed lengths and in your content are some values that needs to be ignored.
An example:
value1 value2 value3
I want to ignore value 2 but I cant find a parameter for that! Do I need to define dummy fields on my data type and ignore those fields during mapping? Or there is a specific parameter for that?
Thanks in advance,
Ricardo.

hi,
there always is another way:)
you can import the whole line to one field
and cut it inside the adapter module
(then you can define start and stop of the substring that you need to use)
but of course it's not standard even though it's quite easy to achieve in java
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

How to cooperate the current mail system with Sun Java Commnication Suite 5

Dear all and Shane,
Excuse me for bothering you again.
Due to time limited, I would like to know how to cooperate the current mail system with Sun Java Commnication Suite 5. I mean I would like to use current mail system (mailscanner + postfix + courier-IMAP + clamav + spamassassin + webmail) and use the outlook connector to connect to Sun Java COMMS 5 to share the calendar, contacts only.
Right now I have done the testing by using outlook, mac mail, thunderbird to share calendar,contacts via Sun Java COMMS 5 in Centos Linux 5.
My plan is as following
1. Sun Java Communication suites 5 server ( I called it comms5 ) will be in DMZ zone and will open the necessary ports in firewall.
2. I will create more than six sub domain name in Sun Delegate server and the necessary accounts within these domain names.
3. All messages will be transmitted via Postfix and clients will retrieve from Courier-IMAP
4. All Clients included other branch offices will use different mail clients to share their calendars, contacts via COMMS5 ( But how will COMMS handle the messages such like invitation ? )
Any suggestions will appreciate.
PS: Is it possible to classify the contacts in outlook address book ?
For example, when user click the receiver, it will show like as following
GLOBAL ADDRESS BOOK
--Director
--and so on
----CN.BRANCH OFFICE
-----------CN01 EMAIL ADDRESS
-----------CN02 EMAIL ADDRESS
-----------CN03 EMAIL ADDRESS
and so on
----JP.BRANCH OFFICE
-----------JP01 EMAIL ADDRESS
-----------JP02 EMAIL ADDRESS
-----------JP03 EMAIL ADDRESS
and so on
----TW.BRANCH OFFICE
and Due to the user account is located in CN.BRANCH OFFICE, it will extend the CN.BRANCH OFFICE contacts level.
Excuse me for bad English, hope you can understand it.
Best Regards,
Bruce

Dogz wrote:
Due to time limited, I would like to know how to cooperate the current mail system with Sun Java Commnication Suite 5.
I mean I would like to use current mail system (mailscanner + postfix + courier-IMAP + clamav + spamassassin + webmail) and use the outlook connector to connect to Sun Java COMMS 5 to share the calendar, contacts only.Getting your current mail system to 'co-operate' in this way will require more time then simply migrating the accounts of users on the current mail system to the comm-suite-5 installation and making use of UWC for Webmail access and ClamAV/SpamAssassin integration within the messaging MTA.
Also the use of Outlook Connector with a non-Sun IMAP backend isn't supported, nor is the use of a non-Sun IMAP backend possible with UWC.
Right now I have done the testing by using outlook, mac mail, thunderbird to share calendar,contacts via Sun Java COMMS 5 in Centos Linux 5. Once again I should remind you that CentOS is not a supported platform for comm-suite-5
Regards,
Shane.

TS2755 Me and my wife r sharing the same Apple ID, with the conversion IOS7 all of a sudden my wife can read all my sended and received iMessages! What t.f is going on? I tried all kind of things, pls help

Gentlemen,
Me and my wife r sharing the same Apple ID, with the conversion to IOS7 all of the sended and received iMessages on my phone comes in also on my wife's phone! Tried all kind of things, pls help
Marco

Are you both using the same Apple ID?
What do you have here:
Settings > Phone > My Number > ?

How to interface the Weigh Bridge System with ABAP thru' RS232 PORT

Hi Gurus,
Can any one guide me how to interface the Weigh Bridge System with ABAP thru' RS232 PORT. I think we have to use the BAPI. What is the name of the BAPI.
I have to capture the GROSS WEIGHT, TARE WEIGHT. can any one give me the code for that.
Goodwill
Jacob charles

Hi Jacob,
You can integrate Weigh Bridge with SAP ABAP .
I have done this for one of our projects
The technology used in RFC SDK and DCOM Connector.
Refer to this link
SAP Business One SDK Version 2005 [original link is broken]
Search here for sap software distribution center link
https://websmp203.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dndcom/html/sapintegration.asp
http://www.intelligententerprise.com/channels/applications/feature/archive/homann.jhtml;jsessionid=BR44S4YLZ0HSGQSNDLOSKHSCJUNN2JVN?_requestid=505707
www.sapgenie.com/sapgenie/docs/SAP%20Connectors.doc
help.sap.com/printdocu/core/ Print46c/en/data/pdf/BCMIDDCOM/BCMIDDCOM.pdf
Good Luck and thanks
AK

Sharing the root file system with file server in windows embedded compact 7

Similar Messages

Maybe you are looking for