Sharing via email says the server did not recognize the username and password combination

I am trying to share photos in iPhoto via email (gmail) and it says the server does not recognize the username password combination. I have deleted the email account rebooted iMac and re-entered the gmail account info and I get the same message. I have confirmed the username and password are correct.

LarryHN I guess I should have clarified that. I did try it that way and I am able to email pictures with mail set as the email client. When I change it to iPhoto as the email client is when I get this message. I have the same setup on my Macbook and it works great for emailing pictures from iPhoto. Although I can send them through email client, I prefer doing it through iPhoto.

Similar Messages

When emailing photos from iPhoto I get a message saying the email server did not recognise my username or password combination.

When emailing photos from iPhoto I get a message saying the email server did not recognise my username or password combination?

falKon wrote:
I found that by turning of the SSL option at the bottom of the Accounts panel did the trick.
I think you were trying to reply to the OP, next time press 'reply' in the post you are replying to.
If you are replying to me, what on earth are you talking about?

Unable to email photos, receive a statement that the server does not recognize my username and or password, have checked multiple times that these are correct

I am unable to e-mail photos, receive a statement saying that the werever does not recognize my username and or password. I have checked multiple times and these are correct.

The box comes up that says "server does not recognize username or password".
That error message usually will pop up, when there is a conflict between the "From" setting for the mail account you are sending from and the selected outgoing mail server. Probably the outgoing Mail server is receiving a user name and password it does not understand. When the mail returns unsent, do you see the "Try again" panel with the option to select a different outgoing mail server?
If you do not see this panel, change the Mail "Preferences > General" to "If Outgoing server is unavailable: Show a list of alternate servers". This way, you will know, which server Mail is trying to send from.
Have you tried to set "From" pop-up menu to one of your other email addresses? If that works, change your settings in Mail to always send from this address. You can set this option in the Mail "Preferences > Composing: Send New Messages from". I have my "Send New Messages from" set to "iCloud". That is working best for me with iPhoto.

The email server did not recognize your user name/password combination

email server did not recognized your username/password combination

I found that by turning of the SSL option at the bottom of the Accounts panel did the trick.

Server did not recognize user name or password - i have changed password in mobile me. where else does it need to be changed?

Where exactly to my passwords need to match up? I changed my mobile me password and mobileme is working fine. When I try to access my calendar, it gives me the "Server did not recognize user name or password" warning and ical will not load. Where else does my password need to be ch

Hi birdman07,
You need to go into iCal and manually change the password.
iCal > Preferences > Accounts > MobileMe email address (CalDAV) > Account Information
I ran into the same problem when I recently changed my password for MobileMe and this resolved it.

The email server did not recognize my username

i try to mail picture it says the email server did not recognize your username/password combination

In the iPhoto preferences ==> accounts delete the account and re-enter it
Of IMHO the better alternative is to set Apple Mail as the e-mail client in the iPhoto preferences and use it instead of iPhoto
LN

The email server did not recognize your username/ password combinations

i recieved this alert:the email server did not recognize your username/ password combinations. everytime when i sending a photo from iphoto? how do i solve it please?

iPhoto preferences ==> accounts
Of IMHO better yet set Apple Mail as the e-mail client in the iPhoto preferences
LN

I bought a new McBook Pro and when I backed up from my old computer, the iCal on my new computer is not syncing. It says "The server did not recognize your user name or password for (name of my mobile me acct). Make sure you enter them correctly."

I bought a new McBook Pro and when I backed up from my old computer, the iCal on my new computer is not syncing. It says "The server did not recognize your user name or password for (name of my mobile me acct). Make sure you enter them correctly." Any suggestions?

Carla,
Check this post for a possible solution.

Hi-I am trying to email photos from iPhoto and I keep getting a flag that says "the server does not recognize the username/password combination. Can you help me to reset it?

Hi…I am trying to email photos from iPhoto and I keep getting a flag that says "the server does not recognize the username/password combination. Can you help me to reset it?

Thank you very much for the quick reply and it was so easy. Make my life much easier now
Thanks so much

BC Ecommerce SOAP Error: Server did not recognize the value of HTTP Header SOAPAction

I am trying to add a product to an ecommerce site with this soap action: Product_UpdateInsert
I have followed this very brief instruction: https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx?op=Product_UpdateInsert
I have a html page in a secure area with a jQuery ajax soap script.
I get the this error when I run the script:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>Server did not recognize the value of HTTP Header SOAPAction: https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice/Product_UpdateInsert.</faultstring><detail /></soap:Fault></soap:Body></soap:Envelope>
I have also tried to add a header with the Soap action with the beforeSend in the ajax call.
This must have been solved before I suppose?
Here is my script:
<!DOCTYPE html>
<html lang="en">
<head>
<title>Test SOAP Request</title>
    <script type="text/javascript" src="//code.jquery.com/jquery-1.10.2.min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/jquery-cookie/1.3.1/jquery.cookie.min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/underscore.js/1.5.1/underscore-min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/backbone.js/1.0.0/backbone-min.js"></script>
    <script type="text/javascript" src="//cdn.worldsecuresystems.com/bcapi/bcapi-0.0.1.min.js"></script>
</head>
<body>
<script>
var wsUrl = "https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx";
var soapRequest =
'<?xml version="1.0" encoding="utf-8"?> \
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"> \
<soap12:Body> \
    <Product_UpdateInsert xmlns="https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice"> \
      <username>myEmailAdress</username> \
      <password>mySecretPassw</password> \
      <siteId>1894001</siteId> \
      <productList> \
        <Products> \
          <productCode>ZJAWEyuuyN</productCode> \
          <productName>My test product</productName> \
          <description>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.</description> \
          <smallImage>/images/product1/small.jpg</smallImage> \
          <largeImage>/images/product1/large.jpg</largeImage> \
         <cataloguesArray> \
             <string>/Store/</string> \
          </cataloguesArray> \
          <pricesSaleArray> \
            <string>US/19.95,3/17.96,7/16.96</string> \
          </pricesSaleArray> \
          <pricesRetailArray> \
            <string>US/20,5/19,8/20</string> \
          </pricesRetailArray> \
          <pricesWholesaleArray> \
            <string>US/20,5/19,8/20</string> \
          </pricesWholesaleArray> \
          <wholesaleTaxCodeArray> \
            <string>US/0.00</string> \
          </wholesaleTaxCodeArray> \
          <taxCodeArray> \
            <string>GB/VAT</string> \
          </taxCodeArray> \
          <groupProducts> \
            <string>580H0036BL</string> \
            <string>ACAI60</string> \
            <string>ABC-123</string> \
          </groupProducts> \
          <groupProductsDescriptions> \
            <string>Lorem ipsum dolor sit amet</string> \
            <string>consectetur adipisicing elit</string> \
          </groupProductsDescriptions> \
          <supplierEntityId>1234</supplierEntityId> \
          <supplierCommission>0</supplierCommission> \
          <weight>30</weight> \
          <tags>NEW!</tags> \
          <unitType>string</unitType> \
          <minUnits>0</minUnits> \
          <maxUnits>2</maxUnits> \
          <inStock>43</inStock> \
          <onOrder>3</onOrder> \
          <reOrder>2</reOrder> \
          <inventoryControl>true</inventoryControl> \
          <canPreOrder>true</canPreOrder> \
          <custom1>Text in custom field 1</custom1> \
          <custom2>Text in custom field 2</custom2> \
          <custom3>Text in custom field 3</custom3> \
          <custom4>Text in custom field 4</custom4> \
          <popletImages>/images/image1.jpg;/images/image2.jpg;</popletImages> \
          <enabled>true</enabled> \
          <deleted>false</deleted> \
          <captureDetails>true</captureDetails> \
          <downloadLimitCount>20</downloadLimitCount> \
          <limitDownloadsToIP>0</limitDownloadsToIP> \
          <isOnSale>true</isOnSale> \
          <hideIfNoStock>true</hideIfNoStock> \
          <productAttributes>Size*|5|Y:L||UK/2|US/20,S||UK/1|US/10</productAttributes> \
          <isGiftVoucher>false</isGiftVoucher> \
          <enableDropShipping>true</enableDropShipping> \
          <productWeight>0</productWeight> \
          <productWidth>0</productWidth> \
          <productHeight>0</productHeight> \
          <productDepth>0</productDepth> \
          <excludeFromSearch>false</excludeFromSearch> \
          <productTitle>My product title</productTitle> \
          <cycletypeId>3</cycletypeId> \
          <cycletypeCount>-1</cycletypeCount> \
          <slug>my-product</slug> \
          <hasVariations>true</hasVariations> \
          <variations> \
            <ProductVariation xsi:nil="true" /> \
            <ProductVariation xsi:nil="true" /> \
          </variations> \
        </Products> \
      </productList> \
    </Product_UpdateInsert> \
</soap12:Body> \
</soap12:Envelope>';
$.ajax({
     type: "POST",
     beforeSend: function(xhr){xhr.setRequestHeader('SOAPAction', 'https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice/Product_UpdateInsert');},
     url: wsUrl,
     contentType: "text/xml",
     dataType: "xml",
     data: soapRequest,
     success: processSuccess,
     error: processError
function processSuccess(data, status, req)
   if (status == "success")
   alert("Success!");
function processError(data, status, req)
   alert("Failed!");
   alert(req.responseText + " " + status);
</script>
</body>
</html>

This line is a target namespace so it should not be changed: <Product_Retrieve xmlns="http://tempuri.org/CatalystDeveloperService/CatalystEcommerceWebservice"> It is very easy to think that it's a placeholder and that it should be replaced with your own url, which it should not and which will fail.
This works now:
<!DOCTYPE html>
<html lang="en">
    <head>
        <title>Test 7 SOAP Request</title>
        <script type="text/javascript" src="//code.jquery.com/jquery-1.10.2.min.js"></script>
    </head>
    <body>
        <script>
            var SoapMessage = '<?xml version="1.0" encoding="utf-8"?> \
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"> \
<soap12:Body> \
<Product_Retrieve xmlns="http://tempuri.org/CatalystDeveloperService/CatalystEcommerceWebservice"> \
<username>Your Email</username> \
<password>Your password</password> \
<siteId>1894001</siteId> \
<productCode>HHKDKXS5MB</productCode> \
            </Product_Retrieve> \
            </soap12:Body> \
            </soap12:Envelope>';
            var url = "https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx";
            $.support.cors = true;
            $.ajax({
                type: "POST",
                url: url,
                data: SoapMessage,
                dataType: "xml",
                processData: true,
                contentType: "text/xml; charset=\"utf-8\"",
                success: function (msg) {
                    alert("suc: " + msg);
                error: function (msg) {
                    alert("Failed: " + msg);
        </script>
    </body>
</html>

Error in iCal: The server did not recognize your user name or password for account "Gmail."

To keep my iCal up to date on two computers, I export an Archive in one and import it to the other. Yes, I know I should use the Cloud, but humour me.
Export of iCal from my MacBook Air (OS 10.7.5) no longer works when imported to my desktop (OS 10.6.8). It returns an error saying "The server did not recognize your user name or password for account “Gmail.” Make sure you enter them correctly."
After dismissing this dialogue box twice (it offers no other options, iCal crashes.
I've turned off the option on my MacBook that asks to use my Gmail account, but since I can no longer launch iCal on my desktop, it can't import new data. How can I clean out the brain of iCal on the desktop so that it will open -- blank -- and perhaps accept a new version of my iCal data?
Thanks,
Bruce

iCal
MobileMe
Apple Support

ICal pop-up message .. The server did not recognize your user name or passw

I'm having a problem with pop-up boxes when I launch iCal. They indicate the following;
"The server responded with an error. The server did not recognize your user name or password for account “[email protected]” Make sure you enter them correctly."
I recently let my MobileMe account expire as I was not using it that much. As a result, I think this issue is occuring, though I don;t know how to fix it. The same is happening on my iPhone when I attempt to receive eMails from a secondary eMail account.
I would appreciate any help that anyone can provide.
Thank you !! Kenneth

A lot of people have been unable to access Yahoo e-mail on their iPhones or iPads. My wife’s iPad was not downloading Yahoo mail, although her iPhone was. Both used IOS 8.2. We tried deleting the account several times and troubleshooting all of the other settings. The problem appears to have been that allowing the IOS to automatically create the account on the iPad resulted in the wrong settings for the incoming server. The following procedure, pieced together from two websites, fixed the problem for us. So far, so good.
https://portal.smartertools.com/kb/a2659/configure-imap-for-iphone-or-ipad.aspx
https://help.yahoo.com/kb/mobile-mail/imap-server-settings-sln4075.html
On the iPhone, tap Settings.
Tap Mail, Contacts, Calendars.
Tap your Yahoo account, then delete it.
Tap Add Account.
Tap Other.
Tap Add Mail Account.
Complete the Name, Address (email address), Password and Description fields.
Click Next.
Ensure IMAP is selected.
Enter the following incoming mail server information:
Incoming Mail (IMAP) Server - Requires SSL
Server: imap.mail.yahoo.com
Port: 993
Requires SSL: Yes
Hostname is mail.yahoo.com.
Username is your full email address
Password is the same password used to access webmail.
Enter the following outgoing mail server information:
Outgoing Mail (SMTP) Server - Requires SSL
Server: smtp.mail.yahoo.com
Port: 465 or 587
Requires SSL: Yes
Requires authentication: Yes
Username is your full email address
Password is the same password used to access webmail. It may have been entered for you.
Tap Next.
The iPhone will establish an SSL connection to your IMAP and SMTP servers.
That’s all!

ICal pop-up when I open: The server did not recognize your user name or password for account. Make sure you enter them correctly.

The server did not recognize your user name or password for account. Make sure you enter them correctly.
I am getting this pop-up whenever I open iCal. Recently changed Google password. What has gone wrong?
<Email Edited By Host>

You really should not post your email address to a public forum such as this where it can be harvested by spammers. I requested the Hosts edit it for your protection.

Receiver SOAP Adapter Problem-soap fault: Server did not recognize the valu

I have a scenario for service orders using async call : IDOC-XI-SOAP.
I used the XML Spy tool to test the Service order's web services and it works fine. I imported the same WSDL file in XI. When I send a SOAP message from XI, I get a following error in the adapter engine.
<i>MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server did not recognize the value of HTTP Header SOAPAction: AddUpdateCostObjectLevel1.</i>
Can someone please help me...
Thanks in advance!
Mrudula

This problem is resolved by me by passing the "http://company's URL/AddUpdateCostObjectLevel1" in the SOAP action.
Thanks to all for your input.
Mrudula

Server did not recognize the value of HTTP Header SOAPAction: .

hello friends,
I am wrote a WebService client as below
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
public class AtmuClient
public static void main(String [] args) {
try {
String req="request";
String endpoint ="http://10.1.3.104/mims/service.asmx?WSDL";
String nameSpaceUri = "http://www.cum.com/MIMS";
Service service = new Service();
Call call = (Call) service.createCall();
call.setTargetEndpointAddress( new java.net.URL(endpoint) );
call.setOperationName(new QName(nameSpaceUri, "echoString") );
String ret = (String) call.invoke( new Object[] { req } );
System.out.println("Sent 'Hello!', got '" + ret + "'");
} catch (Exception e) {
System.err.println(e.toString());
the out put I am getting is
Server did not recognize the value of HTTP Header SOAPAction: .
what still I need to incorporate to my code. Do i need to add any methods still ? and one more thing is do i need to write WSDD for this? how ?. can any bady guide me
thanQ for any greatful guidance.
HAN.

Try setting an empty header object for the Call
SOAPContext ctx = new SOAPContext();
Header header = new Header();
Call call = new Call("", "", params, header, "", ctx); Regards
Byju Joy

Sharing via email says the server did not recognize the username and password combination

Similar Messages

Maybe you are looking for