Sharing web access

is it possible to leech off a mobile phones web access with my mac powerbook. that would give me mobile access anywhere I had cell service.

Unfortunately, I don't know the DSL router you're working with or much about Macs but if everything is working inside the LAN then most likely all you need to do is forward the HTTP port and FTP port to your computer (the web and ftp server) on your router. This is called Port Forwarding and you would need to forward:
80 (HTTP) to 192.168.1.100 or whatever the IP address is of your computer
20 - 21 (FTP) to 192.168.1.100 or whatever the IP address is of your computer
Depending on the FTP method of your server (active or passive) you might need to forward other ports as well but what is essentially happening is that when someone makes either an HTTP request or FTP request from outside your LAN they are stopped when they hit your DSL router because the ports are closed.
Hope this helps...

Similar Messages

Map a drive to the Remote Web Access - Shared Folders

All companies love Remote Web Access. No need for VPN for access to remote desktop and the "private skydrive" Shared Folders.
Is there anyway to map a drive to these "private skydrive" Shared Folders? you can map a drive to the real skydrive and to Sharepoint so surely it is possible?

The trick that I found was to upgrade my file server to server 2012 R2 and configure iSCSI Target for the resource I wanted to access by RWA. On my RWA Server I then used the iSCSI initiator to connect to that Target. This makes the shared drive appear
as if it is a native drive on the RWA server. Once this was done I configured that drive, or a folder within that drive for access with RWA. It has worked perfectly ever since.
Trust but verify!

Can't access online backup and sharing web site

Does anyone know how to access the Online Backup and Sharing web site from a computer that does not have the O/B/S software installed? I used to be able to go to My Verizon/My Services/Internet and hit "Launch" for O/B/S, and the link would go directly to the web site for uploading or downloading material. Now, that link takes me to a Verizon page that asks to activate the O/B/S service, and wants to download the software. My O/B/S service was activated years ago and has worked until recently without the software installed. There is no other obvious way to get to the O/B/S web site. (If it matters, I tried this in both IE 9, with Windows 7 64-bit, and Safari.)
After some effort, I got the help number for the outside vendor that runs the O/B/S service. They say that the Verizon web site should link directly to their O/B/S web site, regardless of whether or not the O/B/S software is installed locally, but that the failure to do so is entirely an error of Verizon's on the Verizon web site and they have nothing to do with it. They also said there is no way to bypass the Verizon web site to get to a Verizon O/B/S account on their web site. They said they have received many complaints about this from Verizon O/B/S customers, and that the same problem has even arisen when the O/B/S software is installed on the local computer.
So does anyone know if it is really necessary to install the O/B/S software on any computer used to access O/B/S, and if it is now impossible to access the material from any other computer? That would be a major reduction in the usefulness of the service that was not announced anywhere that I know of. I saw a strong of comments on this issue in the Forums from a few years ago, but the conclusion was that the problem had been fixed. It seems to have arisen again.

Anthony, I tried to private message you several times, but I kept getting an error message stating that my message had invalid HTML that was being removed, and to resend. It did not actually have any HTML, and hitting the resend button just led to the same message.
Also, since my last post, I downloaded the OBS software onto my computer. This gave me access to OBS from that computer. However, even after doing this, I cannot use the old method of directly getting to the OBS web site from My Verizon. The link from "Launch" does not work either on the computer with the OBS software or on any other computer. Rather, the link goes only to the Verizon page saying that my OBS service has not been activated (which it surely has been) and asking to download the OBS software.
If this is happening to everyone and not just to me, this means that material stored on OBS is only available from a computer that has the OBS software downloaded on it. That is certainly not supposed to be the case, and it would make OBS much less useful.
Again, the OBS technical people said that this was a problem that they knew about, but it was entirely a problem with the Verizon web site that they could not do anything about.

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

Error in Remote Web Access - "An unexpected error occurred. Please try again. If the problem continues, contact the person who manages your server."

I have set up the RWA and I can log in to the web console with my server account. However when I click on any of the shared folders I get this error:
An unexpected error occurred. Please try again. If the problem continues, contact the person who manages your server.
Does anyone know how to troubleshoot this?
Regards,
Maciek

I had this very same issue with one of our customer's servers that was running Windows Server Essentials. I ended up calling Microsoft about the issue. I hope this helps someone. This originally appeared on my blog: http://techspeeder.com/2014/01/14/remote-web-access-error-an-unexpected-error-occurred/
Troubleshooting Steps:
1. We were getting unexpected errors while accessing shared folders remotely
2. The tech found IIS handlers were missing
3. She went to IIS > server level ( parent level) and added managed handler mapping :
Name: svc-Integrated-4.0
Request path: *.svc
Executable: System.ServiceModel.Activation.ServiceHttpHandlerFactory, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
4. Added script mapping:
Name: svc-ISAPI-4.0_64bit
Request path: *.svc
Executable: windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll
Name: svc-ISAPI-4.0_32bit
Request path: *.svc
Executable: windir%\Microsoft.NET\Framework32\v4.0.30319\aspnet_isapi.dll
5. Ran IISreset.
6. We were able to access resources in Remote access, then.

Can't connect to computer in remote web access

I am running sbs 2011 essentials and have been able to remotely log in to the remote web access page. Once I get there I can see all the shared folders on the server (and access them) and I can also see the computers available for access (my computer
and the server). I can access the server dashboard by logging in as the server administrator (by using domain\admin) and then in a second login as a user (domain\user "with administrative rights"). However, when I go to logon to the client
computer, I receive the error "Remote Desktop cannot find the computer "client". This might mean that client doesn't belong to the specified network. Verify the computer name and network that you are trying to connect to."
Do I have a DNS problem since I can connect to the SBS 2011 Essentials server?

Hi,
Are you facing issues with all the client machine connection? On the workstations make sure Remote Desktop feature is enabled
Make sure windows firewall service is enabled and inbound rule for allow RDP is enabled.
You can also refer to:
https://support.microsoft.com/kb/2023103?wa=wsignin1.0
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Small Business Server 2011 Essentials Remote Web Access fails to connect to Windows 8.1 PC

I am using Remote Web Access (RWA) gateway with Small Business Server 2011 Essentials.
There are several workstations all running Windows 7, and have been using RWA without an issue for well over a year.
There is now a Windows 8.1 Pro PC added to this domain, but the Remote Desktop does not connect.
The Windows 8.1 PC appears in the RWA pages, It requests the credentials to connect, and then fails with the following error:
Remote Desktop can't find the remote computer "COMPUTERNAME". This might mean that the "COMPUTERNAME" does not belong to the specified network. Verify the computer name and domain that you are typing to connect to.
I can connect to all other PC fine (running Windows 7). I have tried from different locations and PC's and the results are the same.
I thought I had fixed this problem a few weeks back. After running all updates on the server and Windows 8.1 PC, and rebooting both, the RDP worked, but I think it only worked once and then failed the next time someone tried to use it. I have not had
a successful connection to the Windows 8.1 PC since.
I am at a loss on how to troubleshoot this as there are no errors on the system which can't be accessed.
Any suggestions will be appreciated.

Hi Mr Cheese,
à
I turned off the Firewall on the Windows 8.1 PC and the RDP is now working.
Thanks for sharing in the forum. Your time and efforts are highly appreciated.
Based on your description, this issue is related to Firewall. Would you please let me know current situation
of this issue?
Just addition. Please open Control Panel, select Windows Firewall and click Allow an app or feature through
Windows Firewall. Then please check if Remote Desktop is allowed. Meanwhile, please click Advanced settings in Windows Firewall panel and click Inbound Rules, then check if rules which be related to Remote Desktop were enabled.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Can't download files on Android from Server 2012 Essentials Remote Web Access

I have two servers, one with Windows Server 2012 Essentials, and the other SBS 2011. Employees like using Remote Web Access to log in from anywhere and have access to shared folders. It works perfect on a Desktop computer, but when they try to
use their Android tablets or phones, and want to download a file (e.g. a PDF) from one of the shared folders on the server, the download fails. When Microsoft was pushing 2012 they said RWA worked great on mobile devices, do I have to set up something
separately to make this happen?
I've completely disabled the firewall, and have ports 80,443,987, and 1723(just to be safe) all forwarded to the server.
I can log into the RWA site on the android, browse files and folders, but when I select a PDF to download, the download shows as if it's starting, shows in my android notification as if its going to start downloading (Shows MobileDownload www.mydomain.com)
but eventually after a few minutes, will time out and show "Download Unsuccessful".
Network connectivity is fine as I can do this on a Windows Desktop PC using any browser (Chrome, Firefox, IE) and successfully download anything I want.
UPDATE: I found this in the event handler when I tried to download something from a mobile device...
- System
- Provider
[ Name] ASP.NET 4.0.30319.0
- EventID 1309
[ Qualifiers] 32768
Level 3
Task 3
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2014-01-12T16:49:12.000000000Z
EventRecordID 72818
Channel Application
Computer MYSERVER.MYDOMAIN.local
Security
- EventData
3005
An unhandled exception has occurred.
1/12/2014 11:49:12 AM
1/12/2014 4:49:12 PM
953eedf1ad414391a193e5f98a281da5
263
3
0
/LM/W3SVC/1/ROOT/Remote-1-130340167702975633
Full
/Remote
C:\Program Files\Windows Server\Bin\WebApps\RemoteAccess\
MYSERVER
2592
w3wp.exe
NT AUTHORITY\NETWORK SERVICE
HttpException
Server cannot set content type after HTTP headers have been sent. at System.Web.HttpResponse.set_ContentType(String value) at System.Web.UI.Page.SetIntrinsics(HttpContext context, Boolean allowAsync) at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at Microsoft.WindowsServerSolutions.Web.RemoteAccessSite.RealPageHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
https://remote.MYDOMAIN.com:443/Remote/fs/MobileDownload.aspx?path=\\MYSERVER\PICTURES\2013603.jpg
/Remote/fs/MobileDownload.aspx
MY.IP.ADDRESS.141
MYDOMAIN\user
True
Forms
NT AUTHORITY\NETWORK SERVICE
31
NT AUTHORITY\NETWORK SERVICE
False
at System.Web.HttpResponse.set_ContentType(String value) at System.Web.UI.Page.SetIntrinsics(HttpContext context, Boolean allowAsync) at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at Microsoft.WindowsServerSolutions.Web.RemoteAccessSite.RealPageHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

Hi,
Before going further, would you please let me confirm something firstly?
Would you please let me know if all Android devices
encounter this same issue? If you download different type files, will still this issue persists? You can upload a small file (such as a text file) to the share folder, then check if Android device can’t download it.
Based on your description, when logon a desktop computer, you will download files via RWA successfully. Please use the user account which logon computer to logon
the Android device, will still fail to download?
Please check if there has enough free space in Android devices that be used to save download.
When this issue occurred, please check the state of Android device in Dashboard. Besides, I suggest you should run the Best Practices Analyzer (BPA) and fix all
it can find. Then monitor the result.
Run the Windows Server 2012 Essentials Best Practices Analyzer
http://technet.microsoft.com/en-us/library/jj200181.aspx
In addition, regarding to the Event ID 1309, please refer to the following articles.
Event ID: 1309 Source: ASP.NET 4.0.30319.0
http://www.eventid.net/display-eventid-1309-source-ASP.NET%204.0.30319.0-eventno-11022-phase-1.htm
Hope this helps.
Best regards,
Justin Gu

Cannot delegate Reporting Services Web access to domain user / group, User does not have required permissions

Hi
I have an SCCM 2012 SP1 CU3 installation on a Server 2008 R2 + SQL 2008 R2.
I'm having trouble delegating Reporting Services Web Access to a standard domain user.
I have followed the instructions from these blogs:
http://blog.coretech.dk/kea/creating-the-reporting-user-role-in-configmgr-2012/
http://www.wolffhaven45.com/blog/sccm/assigning-users-to-configmgr-reportusers-group-in-sccm-2012/
No matter how I try, I cannot get the reports to show for a standard domain user. In the console no reports are showing and in the web access I get
"User domain\user does not have required permissions........"
The only thing that is consistenly working when I test is to put the AD Group on the Security Role "Full Administrator".
Then everything will show up.
Any ideas on how to troubleshoot this?

Thanks everyone for helping me with tips. I have now solved the problem. It was the permissions from SCCM that did not replicate to the Reporting Server.
In srsrp.log I got these error messages:
Could not retrieve the reporting service name for instance 'MSSQLSERVER'
Invalid class
Could not stop the reporting serviceAfter googling a litte I found these 2 sites with similiar problems:http://social.technet.microsoft.com/Forums/en-US/d4a7f93a-506f-4e3f-b5fc-bd2b087277da/ssrs-permissions-do-not-add?forum=configmanagergeneral
http://www.microtom.net/microsoft-system-center/software-distribution/sccm-2012-reporting-services-do-not-install
So I ran the command for SQL 2008 R2: mofcomp.exe C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof
and BAAM, everything started to work =)
/ALX

Create Hyper link in Outlook web access

Hi ,
How to create/insert a hyperlink of our local shared network drive file path in outlook web access 2003 ?. Kindly give solutions.
Regards,
Satheesh

Hi,
Yes, we can.
I assume that share a test folder with location:
file://EXCH2-CU1/test, please follow below steps to share local folder by OWA:
1. Open OWA and input Share Folder, click Insert Hyperlink.
2. Then select “file:” in Type field and input URl “file://EXCH2-CU1/test”, then click Send.
3. Now, recipient can use this shortcut to open share folder.
Best Regards,
Allen Wang

Error: Unable to display RD Web Access + URL redirection

Dear All ,
Today I have configured RD web password change.
I am able to launch the url and change the password successfully, but after changing the password when I am pressing OK button I am getting below error message in IE
Error: Unable to display RD Web Access
An unexpected error has occurred that is preventing this page from being displayed correctly.
Viewing this page in Internet Explorer with the Enhanced Security Configuration enabled can cause such an error.
Please try loading this page without the Enhanced Security Configuration enabled. If this error continues to be displayed, please contact your administrator.
Also,
How do I change the default URL https://10.10.10.25/RDWeb/Pages/en-US/password.aspx to https://passwordchange.test.org
And,
In google chrome after pressing OK button it shows nothing just a while blank page
Regards
Atul A

Hi,
Thanks for posting in Windows Server forum.
As this thread has been quiet for a while, we will mark it as ‘Answered’ and if there is anything new to update we will let you know by following up this thread.
BTW, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks for your Support & understanding!
Regards.
Dharmesh Solanki
TechNet Community Support

Outlook Web Access Light and Attachments

Hi - my company makes email available by MS webmail as well as outlook clients on PCs - when i travel with my own Mac i accesss the webmail - but it wont allow me to download attachments, only view them as a web doc - no editing or saving etc.
Our IT boys reckon that if I select "Private" computer instead of "Public" then it will work - however, this notion of a network setup option relates to Windows - I don't recall it on the Mac - any suggestions welcomed please\
Many thanks
Phil

Hi,
Glad to know that we have found the solution, thank you for your sharing.
Some additional information about msexchquerybaseDN for your reference:
OWA does not incorporate user permission sets when doing searches. The permissions set on OUs do not prevent search results from including other segregated group's recipients, due to how OWA works. This is where attribute
msExchQueryBaseDN comes in.
In order for us to control or restrict the search results to include only the members of the appropriate address list in Outlook Web Access, we must set the attribute
msExchQueryBaseDN on each user object to the
distinguishedname (DN) of the OU or an address list containing the correct group of users.
More details in the following blog:
http://blogs.technet.com/b/provtest/archive/2008/12/10/hmc-4-5-and-exchange-2007-sp1-part-2.aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Premiere Elements13 web access

adobe premiere Elements 13 install cannot connect to web or Adobe server. I go anywhere on the web so I DO have web access regardless of what the program says.

alanf
Please look at the following to see if it applies to you and your Premiere Elements 13 and what sounds like a no Internet connection matter.
ATR Premiere Elements Troubleshooting: PE12: Sign In Failure (Connect to Internet or Fix Computer Clock)
The link addresses a version 12 issue, but should apply to 13 as well.
Have you refreshed your Web Sharing under Edit Menu/Preferences? Important - is this a "it worked before but not now" issue or a "it never worked before issue"?
Please let us know the outcome.
Thank you.
ATR

Outlook web access address book to iphone mail

hi,
i have my work email at outlook web access, it has a shared address book.
i have setup mail on my iphone through microsoft exchange to send and recieve mail successfully.
can i get the contacts from the web mail to the phone mail?
cheers

Accessing an Exchange account with the iPhone's Mail app by creating the account with the Exchange account preset provides for syncing Exchange contacts and calendar events over the air.

Can no longer connect to a Microsoft Outlook Web Access site

Hi,
I hope you can help.
I used to be able to access a Microsoft Outlook Web Access site. However recently I am unable to do so. It has a self signed certificate, which I used to choose to accept, and then the browser waits and waits and waits.
I have tried Safari, Firefox, Camino, Flock, Opera, even Internet Explorer. They all behave the same way.
I am not sure when it stopped working. I only log on infrequently. So I do not know if it stopped working after a security update or an OS upgrade.
My Mac is up to date with software updates. I have performed the usual things, repaired permissions etc.
The funny thing is I can connect using Netscape Comunicator under Classic. I have also borrowed a friend's MacBook running leopard, and that works too.
I am wondering if a setting somewhere has become corrputed or inadvertently set incorrectly.
Thank you in anticipation.
Ted

Hi Bryan,
Thanks for your input.
Unfortunately I cannot get any of the OS X browsers I have tried to get beyond the accepting the site's certificate. All just stall waiting on the Outlook Web Access site. Safari 3.1, Camino, Flock, Firefox (2.0.0.12 and 3 beta 4), Netscape (7.1 and 9), Microsoft's Internet Explorer (thinking that might be more integrated with its Outlook Web Access package).
I have even deleted the certificates from my Keychain (for Safari) or within the other browsers' preferences.
Last night I even re-applied the 10.4.11 combo updater and then checked for software updates to confirm my system was up to date, but again without success when attempting to reach the Outlook Web Access site.
Thanks anyway.
Ted

Sharing web access

Similar Messages

Maybe you are looking for