Shell script to run PL/SQL Program

hai,
i have problem in returning values from PL/SQL procedyre back to Shell script which calls the procdure.can anyone please suggest a model shell script to handle this
Thankyou

SQL> create or replace function disp_mess
2 return varchar2 is
3 begin
4 return('Hello World');
5 end;
6 /
Function created.
SQL> select disp_mess from dual;
DISP_MESS
Hello World
SQL> exit
Disconnected from Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
With the Partitioning option
JServer Release 8.1.7.4.0 - Production
$ cat disp_mess.sh
MESS=`sqlplus -s scott/tiger << !
set head off
set pages 0
select disp_mess from dual;
exit
! `
echo $MESS
$ disp_mess.sh
Hello World
$Paul

Similar Messages

Using a UNIX shell script to run a Java program (packaged in a JAR)

Hi,
I have an application (very small) that connects to our database. It needs to run in our UNIX environment so I've been working on a shell script to set the class path and call the JAR file. I'm not making a lot of progress on my own. I've attached the KSH (korn shell script) file code.
Thanks in advance to anyone who knows how to set the class path and / or call the JAR file.
loggedinuser="$(whoami)"
CFG_DIR="`dirname $0`"
EXIT_STATUS=${SUCCESS}
export PATH=/opt/java1.3/bin:$PATH
OLDDIR="`pwd`"
cd $PLCS_ROOT_DIR
java -classpath $
EXIT_STATUS=$?
cd $OLDDIR
echo $EXIT_STATUS
exit $EXIT_STATUS

Hi,
I have an application (very small) that connects to
our database. It needs to run in our UNIX environment
so I've been working on a shell script to set the
class path and call the JAR file.
#!/bin/sh
exec /your/path/to/java -cp your:class:paths:here -MoreJvmOptionsHere your.package.and.YourClass "$@"Store this is a file of any name, e.g. yuckiduck, and then change the persmissions to executechmod a+x yuckiduckThe exec makes sure the shell used to run the script does not hang around until that java program finishes. While this is only a minor thing, it is nevertheless infinite waste, because it does use some resources but the return on that investment is 0.
CFG_DIR="`dirname $0`"You would like to fetch the directory of the installation out of $0. This breaks as soon as someone makes a (soft) link in some other directory to this script and calls it by its soft linked name. Your best bet if you don't know a lot of script programming is to hardcode CFG_DIR.
OLDDIR="`pwd`"
cd $PLCS_ROOT_DIRVery bad technique in UNIX. UNIX supports the notion of a "current directory". If your user calls this program in a certain directory, you should assume that (s)he does this on purpose. Making your application dependent on a start in a certain directory ignores the very helpful concept of 'current directory' and is therefore a bug.
cd $OLDDIRThis has no effect at all because it only affects the next two lines of code and nothing else. These two lines, however, don't depend on the current directory. In particular this (as the cd above) does not change the current directory for the interactive shell your user is working in.
echo $EXIT_STATUS
exit $EXIT_STATUSEchoing the exit status is an interesting idea, but if you don't do this for a very specific purpose, I recommend not to do this for the simple reason that no other UNIX program does it.
Harald.

Do I run a shell script (bsh) via PL/SQL stored procedure?

Hello guys,
Do I run a shell script (bsh) via PL/SQL stored procedure?
For example:
procedure X is
(variables)
begin
-- Read file data
vFileHandle := utl_file.fopen('/mnt/novell/', 'file.txt','r');
exception
when 'INVALID READ FILE' then
(I've to try running script to mount a Novell partition.);
end;
I've to installed Oracle 9.0.1 on Suse Linux.
Please, any ideas or hints ...
Thx and regards.

You might be able to us the HOST command, I think you'd have to run it via dbms_sql, check this page for more details, not sure if it'll be of help but its worth a try..
http://otn.oracle.com/docs/products/oracle8i/doc_library/817_doc/server.817/a82950/ch8.htm
Cheers
Rob

How to call shell script from a pl/sql procedure

Hi all,
I am little bit new to plsql programming, i have a small problem as follows
I have to call a shell script from a pl/sql procedure ..
Please suggest me some methods in oracle 10g, which i could make use of to achieve my goal. also please tell me what are the constraints for those methods if any.
I already came across dbms_scheduler, but i have got a problem and its nor executing properly its exiting giving 255 error or saying that permission problem, but i have already given full access to my shell scripts.
Thanks in advance
Best Regards
Satya

Hi,
Read this thread, perhaps is there your response :
Host...
Nicolas.

Shell script for below pl/sql script dbms_file_transfer

Please let me know how tt write the shell script for below pl/sql script dbms_file_transfer it is
I have trasfer the files from asm into filesystem .
it is working . but i have to put in the loop
begin
dbms_file_transfer.copy_file(
source_directory_object => 'src',
source_file_name => 'ncsn',
destination_directory_object => 'dest',
destination_file_name => 'ncsn');
end;
Edited by: user8680248 on 27/10/2009 20:55

user8680248 wrote:
Please let me know how tt write the shell script for below pl/sql script dbms_file_transfer it is
I have trasfer the files from asm into filesystem .
it is working . but i have to put in the loop
begin
dbms_file_transfer.copy_file(
source_directory_object => 'src',
source_file_name => 'ncsn',
destination_directory_object => 'dest',
destination_file_name => 'ncsn');
end;What database version?
What are you trying to do exactly?
It's working but you have to put it in a loop. Fine, what's the problem you are having?
begin
loop
    exit when ... whatever the exit condition is ...
    dbms_file_transfer.copy_file(
      source_directory_object => 'src',
      source_file_name => 'ncsn',
      destination_directory_object => 'dest',
      destination_file_name => 'ncsn');
end loop;
end;

Sample shell scripts to run workbooks

Does anybody have some sample shell scripts to run the workbooks?

Your Schedule workbooks thru command line thread contains answers.

Msg 8631 Internal error: Server stack limit has been reached on SQL Server 2012 from T-SQL script that runs on SQL Server 2008 R2

I have an Script mostly that is generated by SSMS which works with-out issue on SQL Server 2008, but when I attempt to run it on a new fresh install of SQL Server 2012 I get an Msg 8631. Internal error: Server stack limit has been reached. Please look for
potentially deep nesting in your query, and try to simplify it.
The script itself doesn't seem to be all that deep or nested. The script is large 2600 lines and when I remove the bulk of the 2600 lines, it does run on SQL Server 2012. I'm just really baffled why something that SQL Server generated with very
few additions/changes AND that WORKS without issue in SQL Server 2008 R2 would suddenly be invalid in SQL Server 2012
I need to know why my script which is working great on our current SQL Server 2008 R2 servers suddenly fails and won't run on an new SQL Server 2012 server. This script is used to create 'bulk' Replications on a large number of DBs saving a tremendous
amount of our time doing it the manual way.
Below is an 'condensed' version of the script which fails. I have removed around 2550 lines of specific sp_addarticle statements which are mostly just copy and pasted from what SQL Management Studio 'scripted' for me went I when through the Replication
Wizard and told it to save to script.
declare @dbname varchar(MAX), @SQL nvarchar(MAX)
declare c_dblist cursor for
select name from sys.databases WHERE name like 'dbone[_]%' order by name;
open c_dblist
fetch next from c_dblist into @dbname
while @@fetch_status = 0
begin
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 2400 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script =
null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509F, @identityrangemanagementoption = N''manual'', @destination_table = N''TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false'', @ins_cmd = N''CALL sp_MSins_dboTABLE_ONE'',
@del_cmd = N''CALL sp_MSdel_dboTABLE_ONE'', @upd_cmd = N''SCALL sp_MSupd_dboTABLE_ONE''
EXEC sp_executesql @SQL
SET @dbname = REPLACE(@dbname, 'dbone_', 'dbtwo_');
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 140 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''DB_TWO_TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''DB_TWO_TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script
= null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509D, @identityrangemanagementoption = N''manual'', @destination_table = N''DB_TWO_TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false''
EXEC sp_executesql @SQL
fetch next from c_dblist into @dbname
end
close c_dblist
deallocate c_dblist
George P Botuwell, Programmer

Hi George,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
If you have any feedback on our support, please click
here.
Allen Li
TechNet Community Support

Shell script for running obiee 11g services in linux

Hi
We have a requirement to create a shell script inorder to run OBIEE 11G services in Linux OS. It would be very helpful and greatly appreciated if any pointer(s)/documentation on this is provided.
Thanks

we had run the scripts using nohup "nohup ./startWeblogicServer.sh &" and reopened putty to run other nodemanager and opmnctl scripts, now everything has started and working fine.
Thanks all..

To write a perl script for running a java program from cgi of web server

I have to write a perl script to call a java program(.exe).I want to run this file through the cgi of the web server.
java myprogram
can anyone help me to write a perl script??

It depends on what the java program does. For example, does it parse HTTP headers from standard input, or what?
Are you sure it wouldn't be easier to turn the class into a servlet? etc.
Take a look at IPC::Open2 and IPC::Open3 though. You may need them. (That's just a guess.)

Need Power shell script to run on all databases.

Hi,
I have a stored procedure to generate report, using power shell script want to get all databases, run stored procedure on each database and generate the results as .csv file, output the file with database name (place it on directory) and email .csv
file.
looking for script, can any one help pls?
Naveen| Press Yes if the post is useful.

Can you please share with me the codes
Naveen| Press Yes if the post is useful.
Dear N_14
You can have a look on the followings
http://www.csharp-station.com/Tutorial/AdoDotNet/lesson07
http://www.codeproject.com/Articles/415732/Reading-and-Writing-CSV-Files-in-Csharp
https://msdn.microsoft.com/en-us/library/system.net.mail.mailmessage%28v=vs.110%29.aspx
Best Regards
mintssoul

Automator workflow "run shell script" keeps running. How to stop?

Because i want two instances of dropbox running simultaneously on my Mac, I set up a small automator workflow application. The workflow consist of a simple shell script:
Or in text:
bash
HOME=$HOME/Dropbox-quivertree /Applications/Dropbox.app/Contents/MacOS/Dropbox &
The problem is that once the application runs, or i execute the script from within automator, it just keeps running (i get the little cog in my menubar). Anybody have an idea how to automatically stop after it has launched dropbox?
Thanks!
Kim

I do not have dropbox on my computer, so I tested using the Calculator application. The solution proposed by Mattis S.F. does work, but his explanation does not hold true in my case. Initially, I successfully tried
HOME=$HOME/Dropbox-quivertree nohup /Applications/Calculator.app/Contents/MacOS/Calculator >/dev/null 2>&1 &
If I remove the “nohup”, the result does not change. Removal of the “/dev/null 2>&1”, however, results in the same problem originally described by Kim van der Leeuw. My guess is the background process has stdout and stderr redirected by default back to the automator. When redirected to /dev/null, the automator no longer waits for the background process to complete. To summarize, change
HOME=$HOME/Dropbox-quivertree /Applications/Dropbox.app/Contents/MacOS/Dropbox &
to
HOME=$HOME/Dropbox-quivertree /Applications/Dropbox.app/Contents/MacOS/Dropbox >/dev/null 2>&1 &

Power shell script to run a Resuable workflow.

Hi,
We came across a scenario where we want to run a resuable workflow on all List items in a list. I am not sure if this can be acheived through power shell. Can any one please help me to run reusable workflows through power shell script on list items.
Thanks,
Sandy

Hello,
Recently i executed below script for my VS workflow on list items, you can also try same on reusable WF.
Basically you need to use "WorkFlowManager" and "WorkFlowAssociations " to find WF on list and then execute it.
http://www.mysharepointadventures.com/2012/06/start-a-workflow-using-powershell/
http://www.thesysadminhimself.com/2013/09/sharepoint-start-workflow-all-items-powershell.html
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Unix master shell script to run jobs in parallel with dependency

I need a master shell script which would call the following shell scripts as per below order. Kindly note that if any shell script fails then the master shell script should abort.
Level 1     PRODUCTS
     SP_ROST_DLY_STG_lD
     SP_ROST_DLY_ITG_lD
After Level 1 completes run below two shell scripts in parallel:
Level 2     SP_IDL_EDGE_CON_POSTN_STG_Ld ,     SP_IDL_EDGE_ACCT_POSTN_STG_LD
After Level 2 completes run below shell scripts as per the seqeunce and in parallel:
Level 3     SP_IDL_EDGE_ACCT_STG_LD ,     SP_IDL_EDGE_CONT_STG_LD
     SP_IDL_EDGE_ACCT_STG_VAL ,     SP_IDL_EDGE_CONT_STG_VAL
     SP_IDL_EDGE_ACCT_ITG_Ld ,     SP_IDL_EDGE_CON_ITG_Ld
After Level 3 completes run below shell scripts as per the seqeunce and in parallel:
Level 4     SP_IDL_EDGE_CONT_POSTN_ITG_LD ,     SP_IDL_EDGE_VISITS_LD
     SP_IDL_EDGE_ACCT_POSTN_ITG_LD ,     SP_IDL_EDGE_VISITS_DTL_LD

can i avoid using set -e and use some other method so that if there is an error in previous job then the next job is not triggered.Sure, but it is ugly.
The below is not the only way to do this...
Wrap every place you start another script with:
$ if ! MYSCRIPT; then
    echo Script MYSCRIPT failed. >&2
    exit 1
fibut the wrapper for parallel scripts is even worse:
$ MYSCRIPT &
$ MYSCRIPT_JOBNO=$!
$ MYSCRIPT2 &
$ MYSCRIPT2_JOBNO=$!
$ MYSCRIPT_STATUS=`wait ${MYSCRIPT_JOBNO}`
$ if [ ${MYSCRIPT_STATUS} -ne 0 ]; then
    echo Script MYSCRIPT failed. >&2
    exit 1
fi
$ MYSCRIPT2_STATUS=`wait ${MYSCRIPT2_JOBNO}`
$ if [ ${MYSCRIPT2_STATUS} -ne 0 ]; then
    echo Script MYSCRIPT2 failed. >&2
    exit 1
fi
...Now, doesn't a simple 'set -e' look much better?

Sample shell script - to run procedures and shell script

Hi ,
I would like run some procedures in one shell script which passing parameters as username/password@dbname.
1. Execute proce1
2.Execute proce3
3.Execute proc4
Can you please give some script/idea how we will create shell script . I am using SunSolaris Unix operating system.I would appreciate your help.
Regards,
Clark

user10818198 wrote:
I would like run some procedures in one shell script which passing parameters as username/password@dbname.
1. Execute proce1
2.Execute proce3
3.Execute proc4
At a very basic level, based on the information you have provided, your shell script would be something like this:
sqlplus /nolog <<EOF
connect username/password@dbname
exec proce1;
exec proce2;
exec proce3;
exit
EOFBesides this, you could:
(1) Add the shebang at the top, to specify the shell you are using, e.g. #!/bin/ksh for the Korn shell etc.
(2) Ensure that "sqlplus" is recognized by the shell, by maybe running an "ora_env.sh" script that sets Oracle parameters. More likely, if you are using this Unix account for interaction with Oracle, then you may want to add the Oracle parameter information in your .profile or .bash_profile or .csh_profile etc. in the home directory.
(3) Run a few sqlplus commands right before calling those stored procedures, if needed. For example, if you want to exit from sqlplus (and Oracle) if an error occurs while executing any procedure, then add this -
whenever sqlerror exit 1Thus your script becomes:
#!/bin/ksh
# Ensure that Oracle parameters are set by this point
sqlplus /nolog <<EOF
connect username/password@dbname
whenever sqlerror exit 1
exec proce1;
exec proce2;
exec proce3;
exit
EOF(There are other settings as well; it really depends on your requirements.)
Can you please give some script/idea how we will create shell script . I am using SunSolaris Unix operating system.
How to create a shell script ? Well,
(1) Save the commands shown above in a file, using your favorite text editor. Name the file "my_script.sh" or "<a_better_name>.sh" etc. (or maybe ".ksh" for the Korn shell - it's just a best practice, the shell doesn't really care.)
(2) Make your script executable, like so -
$ chmod 744 myscript.sh(3) And then execute it -
$ ./myscript.sh- You could also execute the script in the current shell (as against a child shell) by doing this after Step (1):
$ . myscript.shHope that helps.
If there are specific questions, then post them here.
isotope

LoginHook Shell Script not running?

I have a very simple login shell script (open http://pathtowebsite.local) that I have set as a LoginHook. When running the script from the Terminal, it opens the website, as expected. However, on login it appears that something happens, the menu bar flashes and disappears until you click on something, but the website doesn't open. The permissions are set properly, and it is executable. The script is located in the global /Library folder in a folder I created called Management, though I also tried putting it in the /Users/Shared directory in case it was an access issue.
Any ideas on what I might do to resolve this issue? I can't seem to get it to actually kick off at user login like it should.

The LoginHook environment is minimum. There is NO PATH
pwd: /
id -a: uid=0(root)
gid=0(wheel)
egid=80(admin)
groups=0(wheel),
1(daemon),
2(kmem),
8(procview),
29(certusers),
3(sys),
9(procmod),
4(tty),
5(operator),
80(admin),
20(staff)
$1: thelogin_person'susername
printenv:
PWD=/
SHLVL=1
SECURITYSESSIONID=449a3aa0
_=/usr/bin/printenv
Notice, no PATH, no USER environment variables, just about nothing as an environment.
So there is no way for the LoginHook to find the 'open' command.
Try changing your script to /usr/bin/open

Shell script to run PL/SQL Program

Similar Messages

Maybe you are looking for