Shooting a video works sometimes, but sometimes it shuts off after one second without recording any video
Have had the Turbo Droid for only 3 days and just tried to shoot video. Twice it worked, but more often it seems to begin recording, but shuts off after one second without recording anything.
Not sure what I'm doing wrong to cause this to happen.
Can you help?
Thanks!
Thanks, EfrainM_VZW.
Haven't seen any error messages. Occasionallly, but only rarely, the video will record 1-2 frames, but most of the time it just shuts down. I have tried it with and without the rubber-grip case; taking off the case had no effect. The video still would not function.
When you tap the video camera icon, it tries to shoot video and seems to begin to record, but one (or two) second(s) later, it beeps and stops. Rarely with a frame or so of video; mostly nothing is recorded.
The still camera works great! Love being able to touch it anywhere to grab a snap.
BTW, my partner and I got identical phones at the same time last week. His video has the exact same problems as my phone.
Another point: I downloaded the Google Camera and can shoot video just fine through that camera. But not through the stock Motorola camera that came with the Droid Turbos.
I'm starting to think we got phones from a defective batch.
What do you think?
Similar Messages
-
Rebel T3 keeps shutting off after few seconds of videoing
I purchased a Rebel T3 for my daughter a few months ago. We are having trouble getting it to video. It keeps shutting off after a few seconds. It has a clean class 10 - 32gb card in it. Help please! (we have used a couple different cards in it, they all do fine & take excellent photos, just MAJOR problem trying to use the video mode) I have a T1i & have no trouble with the video on mine.
The manual may state Class 6 as the minimum speed for reliable HD video capture, but that it is most definitely not the fastest card supported by the camera.
The camera is able to take advantage of cards rated for speeds up to 45MB/s which should be at least 2x faster than the fastest Class 10 cards and about 4.5x faster than a Class 10 card operating at minimum spec of 10MB/s. A Class 10 card is rated for minimum throughput of 10MB/s write speeds. So, it should be between 7-8x faster than a Class 6 card performing at it's specified minimum 6MB/s speed.
So you really need to be looking at the write speed of the SD cards you buy. But, this assumes that the SD card is the problem which it may not be.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7 -
Ipod touch 2nd generation (works fine), but will not shut off
my ipod touch 2nd gneration works fine, but it will not shut off. This use to work: I would hold down both top and face button for about 10 seconds and it would shut down. Now nothing happens no matter how long I hold those 2 buttons down. Any suggestions?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
HD Video Cam Model #: VF0580 Shuts down after 3 seconds of recording
My Vado HD Cam will automatically shut down after recording for 3 seconds. I have purchased and installed new battery and updated firm ware but it still happens.
Any advice?Willizzz,
Sorry, does the Vado HD Cam shuts down only when it's recording or does it turns off right after you turn it on? -
Since Yosemite my Macbook 11inch mid 2011 (supports Thunderbolt) does not see the second thunderbolt display anymore.
My MacBookPro 13inch Early 2013 works fine, but it swaps the screens after an (re)boot.
Does anyone else experience these problems and/or have solutionsHello ROBLAHAY,
I'm sorry to hear you are having this issue with your MacBook Air. I also apologize, I'm a bit unclear on the exact configuration you are describing. If you are talking about using two external Thunderbolt displays (in addition to the internal display) with your Mid 2011 MacBook Air 11-inch, you may want to be aware that only a single external Thunderbolt display is supported on that model, as noted in the following article:
3. How many Apple Thunderbolt Displays can I use with my Mac in OS X?
The table below indicates how many Thunderbolt displays can be connected to Thunderbolt-capable Mac computers in OS X.
Computer
Maximum connected displays
Thunderbolt-capable Macs with Intel HD Graphics 3000 integrated graphics can support one connected Apple Thunderbolt Display (27-inch).
MacBook Air (Mid 2011)
MacBook Pro (13-inch, Early 2011) and (13-inch, Late 2011)1
Mac mini (Mid 2011), 2.3 GHz
Mac mini with Lion Server (Mid 2011)
One Thunderbolt display
Thunderbolt ports and displays: Frequently asked questions (FAQ) - Apple Support
If you are using just a single external display and still having issues, you may find the troubleshooting steps outlined in the this article helpful:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Sincerely,
- Brenden -
I am trying ot install my cs6 online. it says that my code has been redeemed but i took it off of one of my laptops to download it onto this one. it is still not working. please help
Find your serial number quickly
Download CS6 products
Activation & Deactivation Help
Mylenium -
Installed iOS6 on my 3GS phone. The maps app works well, but does not give spoken turn by turn directions.
Any ideas on how to fix this?Go to http://www.apple.com/ios/maps/ and look at the bottom: Turn-by-turn navigation is available only on iPhone 4S, iPhone 5, and iPad 2 or later with cellular data capability. Flyover is available only on iPhone 4S, iPhone 5, iPad 2 or later, and iPod touch (5th generation). Cellular data charges may apply.
You can always use the WAZE app like I do. -
My MacBook Pro starts and shuts off after loading for sometime
My MacBook Pro starts and shuts off after loading for sometime
Try starting in Safe mode by holding down the Shift key while booting. Safe mode takes a while to load the OS. After that, restart the computer normally.
If that does not work, start up in Recovery by holding down the Command and R keys. In the window that opens, choose Disk Utility at the bottom and verify and repair your disk. Repair permissions while you are there. -
iPad--third generation shuts off antenna/hotspot after a few minutes of non-use.
Happens in 3G and LTE VZ environment.
Turning hotspot off and on getsw things working again.
Does Apple have antenna on a timer so it shuts off after a few minutes?
Does this happen on Mini and Retina as well?
FLAGSTAFFLARFixed!
Two things together have restored connectivity.
1. I changed the name under Settings > General > About > Name from My Name's iPad to iPad of My Name. I read somewhere that iOS 7.0.1 or 7.0.2 (I forget which) sometimes had issues with apostrophes here. Easy enough to test.
2. I then reset (again) the APN settings under Settings > Cellular Data > APN Settings > Personal Hotspot and reentered our provider's info (APN, Username, Password) there.
I don't know WHY it worked, but the personal hotspot is now happily sharing (again) internet connectivity with my MacBook Pro. -
Need help fixing video shut off after 2 minutes in non-windows mode
Good morning experts in this forum, I need your help solving a hardware/firmware problem of my computer. I have a Hpe 250f computer with Radeon 5700 series video card on it. I recently noticed one strange problem which prevents me from doing any meaningful work in non-windows mode: The video will be shut off after around 2 min if the computer is not in Windows mode. This includes BIOs mode and recovery mode. There is no problem if the computer logs on Windows within 2 minutes. But if I stay in BIOs settings or try to use HP diagnostics or try to recover a backup using windows backups for around 2 min, the monitor will turn blank and the power button of monitor will turn yellow from green indicating no video output to it. It can not wake up by mouse or keyboard. I read that older BIOs have problem with fan speed and I reflashed the BIOs. But it did not work. This problem drives me mad since I had occasional hard drive failures recently and I could not recover my system (That is why I noticed the problem recently, but the problem could have existed when I bought the computer). Now the computer is out of warrenty and I could not find any similar case using Google search. I really appreaciate your help. Thanks
I had the same problem when I upgraded. In my case it definitely was the power supply. In my effort to figure out the problem by swapping components in and out, the dieing power supply killed 2 P8P67 Pro and 2 2500k, and when I tested with the P67A-GD65, the power supply totally died, but the good thing is that the GD65 survived. Swapped in a 430W to test and everything was perfect. At full load with GTX260, it will draw less than 300W, so your power supply is fine to test.
-
My iPod dispalys this message:
"Connect to a computer. Use iTunes to restore." When I connect to a computer, iTunes doesn't recognise it. The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?
I have seen the Apple webpage suggesting the "five R's" (including restore). Before doing anything, I want to be sure that restoring or any other action is not going to delete or risk my data.
I would be very grateful if anyone can suggest a fix for this problem, in a way that will not risk my data.
Thanks in advance!Did you try a hard reset with the iPod still connected to your PC? Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock -
ipad2 shut off after down the battery but when i connect the charger with my ipad2, its not storing the power in the battery and i also not finding the error code ???
If you drained the battery, it may take a bit for it to come back. I'd plug it in and leave it for a few hours and see if it's charging.
If not, you can try to do a reset. Hold down the sleep and home keys for about 20 seconds. When you see the white apple, let go and let it reset and see if it charges.
It's also possible that your battery has reached the end of its life. THey can only handle a finite amount of recharge cycles. If you can't get it to hold a charge, then make an appointment at your local apple store and explore your other options. -
I have joined adobe photoshop but the program shut down after just one minute, why? I cannot use it!
I have joined adobe photoshop but the program shut down after just one minute, why? I cannot use it!
Without proper system information and other details nobody can tell you anything. If the program shuts down after a while then presumably it fails to verify your activation, so refer to this:
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
Help!!!! my ipod touch 3rd gen won't turn on. at first the problem was it kept shutting off whenever i went into an app, then i plugged it up to the computer to restore it from back up it was working then the ipod just shut off before it was restored help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
PSE trial 12 installed just fine but when i start the editor it opens and shuts down after about 2 seconds without an error, the only thing that appears is a message with 'continue trial'.
I have windows 8.1 64 bit and i already installed the latest video drivers, intel hd 4000 and nvidia geforce 710M.
I also installed premiere elements version 12 with the same problem.
What can be the problem here, please help?
Thanks.
Wim.Hi roberto-
Yes, its a shame. I have also contacted lenovo support hoping that they can sort out this problem. However, first response from them was 'contact your internet service provider since internet connectivity goes down'! :-/ I am hoping I have been able to get through to them now at least about where the problem lies. I wonder if anyone has tried using the laptop with the same broadcom wireless adapter with some other version of OS (linux, windows 7 etc.) and whether they still face the same problem. I haven't tried that yet. If this is just an OS / driver issue I hope someone somewhere is working on a fix! If not, I guess the only other solution would be to get an external USB wifi adapter but that is not something one would want to do when you buy a brand new Lenovo laptop. This was a big let down for me.
-sag
Maybe you are looking for
-
Hi , I am trying some scenario using file adaptor but it is not working. I tried with Runtime Workbench but my adaptor entry is not there in Adaptor monitoring. Can anybody plz tell me how to check whether adaptor is working or not? I am
-
What is wrong in this query am getting incorrect syntax near ','.error.I am using sql server 2014 DELETE ab, b FROM Authors AS a INNER JOIN AuthorArticle AS ab ON a.AuthID=ab.AuthID INNER JOIN Articles AS b ON ab.ArticleID=b.ArticleID WHERE AuthorLas
-
Canoscan 4400f still doesn't work with mavericks
Followed some earlier threads and downloaded appropriate toolbox and driver, but still doesn't work. I see discussion on the TwainBridge.app but not finding it.
-
Query regarding Printing multiple documents
Hi, We would like to know how we can print multiple documents at once not one by one in SAP. Presently we are using FB03 to print the GL document one by one. Thanks Pooja Gupta SAP FICO Consultant
-
How do i set the ConnectionFactory timeout
Hello I hope someone can help me to answer my question. I actually need some help to set the timeout period to shorter time when i do lookup in connectionFactory. Currently It takes about 75 second if there is no connection between my server and clie