Short dump: Conversion from type 'c' to 'v' not possible
Hi,
When do we get the following error? 'Conversion from type "c" to "v" not possible'.
I am getting this dump when I try to assign a structure to a field symbol.
This is happening only for a specific structure type.
Thanks in advance,
Regards,
Wenonah
Hi,
type - v is Structure with internal table , deep structure....
u might have declared the field-symbol as a typed one.....
Declaring it a generic one like type any as suggested in above post might solve the problem.....
Cheers,
Jose
Similar Messages
-
Conversion from type 'CalculatedFieldWrapperImpl' to type 'Integer' is not valid._
Hi,
I'm using SSRS 2008 to create a relatively simple report with a stored procedure as the dataset. The SP runs fine (no errors) but when I try to run the report I get "Conversion from type 'CalculatedFieldWrapperImpl' to type 'Integer' is not valid. "
error message. The data type is declared as int in SQL. I'm using several other int fields in the report without a problem. Anyone familiar with this error? Thanks.
Robert BocconeHmm, my research also suggests multi-value parameters may be the cause, but you say there aren't any in the report. These sings can sometimes be generated automatically though, even if you haven't knowingly created one. You could try checking the .rdl
file directly (if you're using BIDS, just go to View > Code, otherwise load the report into wordpad or similar) and searching for the term 'Parameter' to see if there is anything there. Otherwise, I'm afraid I'm getting a bit lost for ideas
too.I work to UK time. If this post, or another, answers your question, please click the 'Mark as answer' button so others with the same problem can find a solution more easily. -
Dump - Access using NULL object reference is not possible!!!
Hi,
I'm using the BCS class for sending HTM format email so i use the below code for that its working,
DATA: gr_document TYPE REF TO cl_document_bcs,
gr_document = cl_document_bcs=>create_document(
i_type = 'HTM'
i_text = t_html
i_importance = '5'
i_subject = gc_subject ).
Next task is to send the image so i'm creating an another object to the same class, below code
*Image from MIME
DATA: o_mr_api TYPE REF TO if_mr_api.
DATA is_folder TYPE boole_d.
DATA l_img1 TYPE xstring.
DATA l_img2 TYPE xstring.
DATA l_loio TYPE skwf_io.
DATA: lo_document TYPE REF TO cl_document_bcs.
IF o_mr_api IS INITIAL.
o_mr_api = cl_mime_repository_api=>if_mr_api~get_api( ).
ENDIF.
CALL METHOD o_mr_api->get
EXPORTING
i_url = '/SAP/PUBLIC/ZDEMO/tick.png'
IMPORTING
e_is_folder = is_folder
e_content = l_img1
e_loio = l_loio
EXCEPTIONS
parameter_missing = 1
error_occured = 2
not_found = 3
permission_failure = 4
OTHERS = 5.
CALL METHOD o_mr_api->get
EXPORTING
i_url = '/SAP/PUBLIC/ZDEMO/Delete.png'
IMPORTING
e_is_folder = is_folder
e_content = l_img2
e_loio = l_loio
EXCEPTIONS
parameter_missing = 1
error_occured = 2
not_found = 3
permission_failure = 4
OTHERS = 5.
*Convert XSTRING to ITAB
DATA :lt_hex1 TYPE solix_tab,
lt_hex2 TYPE solix_tab,
ls_hex LIKE LINE OF lt_hex1,
lv_img1_size TYPE sood-objlen,
lv_img2_size TYPE sood-objlen.
CLEAR : lt_hex1, lt_hex2, ls_hex, lv_img1_size, lv_img2_size.
WHILE l_img1 IS NOT INITIAL.
ls_hex-line = l_img1.
APPEND ls_hex TO lt_hex1.
SHIFT l_img1 LEFT BY 255 PLACES IN BYTE MODE.
ENDWHILE.
WHILE l_img2 IS NOT INITIAL.
ls_hex-line = l_img2.
APPEND ls_hex TO lt_hex2.
SHIFT l_img2 LEFT BY 255 PLACES IN BYTE MODE.
ENDWHILE.
*Findthe Size of the image
DESCRIBE TABLE lt_hex1 LINES lv_img1_size.
DESCRIBE TABLE lt_hex2 LINES lv_img2_size.
lv_img1_size = lv_img1_size * 255.
lv_img2_size = lv_img2_size * 255.
*Attach Images
clear: lo_document.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'png' " Document Class for Attachment
i_attachment_subject = 'img1' " Attachment Title
i_attachment_size = lv_img1_size " Size of Document Content
i_att_content_hex = lt_hex1 " Content (Binary)
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'png' " Document Class for Attachment
i_attachment_subject = 'img2' " Attachment Title
i_attachment_size = lv_img2_size " Size of Document Content
i_att_content_hex = lt_hex2 " Content (Binary)
but it throws the dump " Access using NULL object reference is not possible" when i tries to access for method add_attachment...
Thanks,
SivaYes there is commit work after that, Below code
gr_document = cl_document_bcs=>create_document(
i_type = 'HTM'
i_text = t_html
i_importance = '5'
i_subject = gc_subject ).
*Image from MIME
DATA: o_mr_api TYPE REF TO if_mr_api.
DATA is_folder TYPE boole_d.
DATA l_img1 TYPE xstring.
DATA l_img2 TYPE xstring.
DATA l_loio TYPE skwf_io.
DATA: lo_document TYPE REF TO cl_document_bcs.
IF o_mr_api IS INITIAL.
o_mr_api = cl_mime_repository_api=>if_mr_api~get_api( ).
ENDIF.
CALL METHOD o_mr_api->get
EXPORTING
i_url = '/SAP/PUBLIC/ZDEMO/tick.png'
IMPORTING
e_is_folder = is_folder
e_content = l_img1
e_loio = l_loio
EXCEPTIONS
parameter_missing = 1
error_occured = 2
not_found = 3
permission_failure = 4
OTHERS = 5.
CALL METHOD o_mr_api->get
EXPORTING
i_url = '/SAP/PUBLIC/ZDEMO/Delete.png'
IMPORTING
e_is_folder = is_folder
e_content = l_img2
e_loio = l_loio
EXCEPTIONS
parameter_missing = 1
error_occured = 2
not_found = 3
permission_failure = 4
OTHERS = 5.
*Convert XSTRING to ITAB
DATA :lt_hex1 TYPE solix_tab,
lt_hex2 TYPE solix_tab,
ls_hex LIKE LINE OF lt_hex1,
lv_img1_size TYPE sood-objlen,
lv_img2_size TYPE sood-objlen.
CLEAR : lt_hex1, lt_hex2, ls_hex, lv_img1_size, lv_img2_size.
WHILE l_img1 IS NOT INITIAL.
ls_hex-line = l_img1.
APPEND ls_hex TO lt_hex1.
SHIFT l_img1 LEFT BY 255 PLACES IN BYTE MODE.
ENDWHILE.
WHILE l_img2 IS NOT INITIAL.
ls_hex-line = l_img2.
APPEND ls_hex TO lt_hex2.
SHIFT l_img2 LEFT BY 255 PLACES IN BYTE MODE.
ENDWHILE.
*Findthe Size of the image
DESCRIBE TABLE lt_hex1 LINES lv_img1_size.
DESCRIBE TABLE lt_hex2 LINES lv_img2_size.
lv_img1_size = lv_img1_size * 255.
lv_img2_size = lv_img2_size * 255.
*Attach Images
create object lo_document type cl_document_bcs.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'png' " Document Class for Attachment
i_attachment_subject = 'img1' " Attachment Title
i_attachment_size = lv_img1_size " Size of Document Content
i_att_content_hex = lt_hex1 " Content (Binary)
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'png' " Document Class for Attachment
i_attachment_subject = 'img2' " Attachment Title
i_attachment_size = lv_img2_size " Size of Document Content
i_att_content_hex = lt_hex2 " Content (Binary)
"Add document to send request
CALL METHOD gr_send_request->set_document( gr_document ).
TRY.
CALL METHOD gr_send_request->SET_SEND_IMMEDIATELY
EXPORTING
I_SEND_IMMEDIATELY = 'X'.
* CATCH CX_SEND_REQ_BCS INTO BCS_EXCEPTION .
**Catch exception here
ENDTRY.
DATA: LO_SENDER TYPE REF TO IF_SENDER_BCS VALUE IS INITIAL.
TRY.
LO_SENDER = CL_SAPUSER_BCS=>CREATE( SY-UNAME ). "sender is the logged in user
* Set sender to send request
gr_send_request->SET_SENDER(
EXPORTING
I_SENDER = LO_SENDER ).
* CATCH CX_ADDRESS_BCS.
****Catch exception here
ENDTRY.
"Send email
CALL METHOD gr_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = gv_sent_to_all ).
IF gv_sent_to_all = 'X'.
WRITE 'Email sent!'.
ENDIF.
"Commit to send email
COMMIT WORK.
"Exception handling
CATCH cx_bcs INTO gr_bcs_exception.
WRITE:
'Error!',
'Error type:',
gr_bcs_exception->error_type.
ENDTRY. -
Short dump - reading from roll back segment
Hi All,
I am getting this short dump for few loads.The error is :
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Database error text........: "ORA-01555: snapshot too old: rollback segment
number 108 with name "PRS_77" too small"
Did any body got this eror:If so,could you please explain why it's comming and how to fix this permanently?
Thanks
ManishThe DBA probably needs to increase the size of the Rollback segment and/or tablespace.
Google the error message for more info. Here's a link to Jonathan Lewis's (well known Oracle author)site.
http://www.dba-oracle.com/t_ora_01555_snapshot_old.htm
Added the link to J Lewis site.
Message was edited by:
Pizzaman -
Posting from vendor consignment into project not possible?
Hello,
I want to consume my materials out of vendor consignment stock for a project.
Everytime I try to do a GI consgt f. project (mvmt 221 K) with MIGO, I receive following error message:
"Account 41100100 requires an assignment to a CO object".
Is it maybe not possible to consume out of vendor consignment into project?
Regards,
SofiaHi,
That's right, you must assign an WBS code to the consumption from consignment to project, beacause system need to book the consumption stock value under the WBS of project.
Hope can help you!
Good day and nice weekend
Tao -
DST prob for conversion from US/Eastern- GMT but not from GMT- US/Eastern.
Hi folks,
I'm running the following SQL against a Oracle 10.2.0.1 g server using Oracle SqlDeveloper 1.5.3 & then again using SQLPlus 10.2.0.1.0.
I'm attempting to provide SQL that highlights the jump forward by one hour at 2am US/Eastern on 14th Mar 2010.
In order to do this I've converted times from GMT into US/Eastern using the oracle function from_tz and to_timestamp.
The following sql statements are suffixed with a 'correct' or 'incorrect' as to whether they correlate to what I would expect and indeed to the time returned from the World Clock website.
=======================
= Via Oracle SqlDeveloper 1.5.3
=======================
-- The first section of selects highlight the jump of 1 hour forward that occurs on the 14th of March 2010 by converting the GMT time to the corresponding US/Eastern time and the second block reverses the conversion.
select from_tz(to_timestamp('14-MAR-2010 0500' , 'DD-MON-YYYY HH24MI'), 'GMT') at time zone 'US/Eastern' from dual; -- returns 14-MAR-10 00:00:00.000000000 US/EASTERN correct
select from_tz(to_timestamp('14-MAR-2010 0600' , 'DD-MON-YYYY HH24MI'), 'GMT') at time zone 'US/Eastern' from dual; -- returns 14-MAR-10 01:00:00.000000000 US/EASTERN correct
select from_tz(to_timestamp('14-MAR-2010 0659' , 'DD-MON-YYYY HH24MI'), 'GMT') at time zone 'US/Eastern' from dual; -- returns 14-MAR-10 01:59:00.000000000 US/EASTERN correct
select from_tz(to_timestamp('14-MAR-2010 0700' , 'DD-MON-YYYY HH24MI'), 'GMT') at time zone 'US/Eastern' from dual; -- returns 14-MAR-10 03:00:00.000000000 US/EASTERN correct
select from_tz(to_timestamp('14-MAR-2010 0701' , 'DD-MON-YYYY HH24MI'), 'GMT') at time zone 'US/Eastern' from dual; -- returns 14-MAR-10 03:01:00.000000000 US/EASTERN correct
select from_tz(to_timestamp('14-MAR-2010 0800' , 'DD-MON-YYYY HH24MI'), 'GMT') at time zone 'US/Eastern' from dual; -- returns 14-MAR-10 04:00:00.000000000 US/EASTERN correct
select from_tz(to_timestamp('14-MAR-2010 0000' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 05:00:00.000000000 US/EASTERN correct
select from_tz(to_timestamp('14-MAR-2010 0100' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 06:00:00.000000000 US/EASTERN correct
select from_tz(to_timestamp('14-MAR-2010 0159' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 06:59:00.000000000 US/EASTERN correct
select from_tz(to_timestamp('14-MAR-2010 0200' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 07:00:00.000000000 US/EASTERN incorrect
select from_tz(to_timestamp('14-MAR-2010 0300' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 08:00:00.000000000 US/EASTERN incorrect
select from_tz(to_timestamp('14-MAR-2010 0301' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 08:01:00.000000000 US/EASTERN incorrect
select from_tz(to_timestamp('14-MAR-2010 0400' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 09:00:00.000000000 US/EASTERN incorrect
which is as I would expect. At 6:59am GMT the time in US/Eastern is 1:59 am, however, at 7:00am the time in US/Eastern is now 3:00am. This correlates to the times I get back when I perform the same calculations using the converter at the WorldClock.
http://www.timeanddate.com/worldclock/converter.html
However when I attempt to perform the same conversions except in reverse i.e. from US/Eastern to GMT I get different results.
-- everything is fine up until the actual time of the change over (2am US/Eastern). With the 2:00am time though I would expect Oracle or perhaps even the SqlDeveloper client to indicate either of the following :-
a) the time 14-MAR-10 02:00am US/Eastern is actually a non-existant time as per the WorldClock.
b) that it's defaulting the time 14-MAR-10 02:00am to 14-MAR-10 03:00am US/Eastern
instead the results proceeding the sql statements are output and for any time on/after 2am they are 1 hour behind their correct GMT times as per the world clock.
I understand that there is a patch for timezone's from 10.2.0.1 to 10.2.0.4 that should address this, however, the reason I'm posting this is because when I run the above SQL in sqlplus against the same server I get different results except this time both conversions are incorrect.
=======================
= Via SqlPlus 10.2.0.1.0
=======================
select from_tz(to_timestamp('14-MAR-2010 0500' , 'DD-MON-YYYY HH24MI'), 'GMT') at time zone 'US/Eastern' from dual; -- returns 14-MAR-10 00.00.00.000000000 US/EASTERN correct
select from_tz(to_timestamp('14-MAR-2010 0600' , 'DD-MON-YYYY HH24MI'), 'GMT') at time zone 'US/Eastern' from dual; -- returns 14-MAR-10 01.00.00.000000000 US/EASTERN correct
select from_tz(to_timestamp('14-MAR-2010 0659' , 'DD-MON-YYYY HH24MI'), 'GMT') at time zone 'US/Eastern' from dual; -- returns 14-MAR-10 01:59:00.000000000 US/EASTERN correct
select from_tz(to_timestamp('14-MAR-2010 0700' , 'DD-MON-YYYY HH24MI'), 'GMT') at time zone 'US/Eastern' from dual; -- returns 14-MAR-10 02.00.00.000000000 US/EASTERN incorrect
select from_tz(to_timestamp('14-MAR-2010 0701' , 'DD-MON-YYYY HH24MI'), 'GMT') at time zone 'US/Eastern' from dual; -- returns 14-MAR-10 03:01:00.000000000 US/EASTERN incorrect
select from_tz(to_timestamp('14-MAR-2010 0800' , 'DD-MON-YYYY HH24MI'), 'GMT') at time zone 'US/Eastern' from dual; -- returns 14-MAR-10 03.00.00.000000000 US/EASTERN incorrect
select from_tz(to_timestamp('13-MAR-2010 2300' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 04.00.00.000000000 GMT correct
select from_tz(to_timestamp('14-MAR-2010 0000' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 05.00.00.000000000 GMT correct
select from_tz(to_timestamp('14-MAR-2010 0100' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 06.00.00.000000000 GMT correct
select from_tz(to_timestamp('14-MAR-2010 0159' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 06.00.00.000000000 GMT correct
select from_tz(to_timestamp('14-MAR-2010 0200' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 07.00.00.000000000 GMT incorrect
select from_tz(to_timestamp('14-MAR-2010 0300' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 08.00.00.000000000 GMT incorrect
select from_tz(to_timestamp('14-MAR-2010 0301' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 08.01.00.000000000 GMT incorrect
select from_tz(to_timestamp('14-MAR-2010 0400' , 'DD-MON-YYYY HH24MI'), 'US/Eastern') at time zone 'GMT' from dual; -- returns 14-MAR-10 09.00.00.000000000 GMT incorrect
so it's as if the Oracle Client SqlDeveloper somehow intervenes as the results come back from the server an adjusts it for the first set of conversions but not the second.
Basically it looks like I need the patch for the timezones for 10.2.0.1 but what about the Clients? Is there patches I then need for them? Would the SqlPlus client that ships with 10.2.0.4 return the correct results or once the patch is applied to the server.
Has anyone else encountered this problem and if so would they be able to point me in the direction of a resource describing and resolving it?
Thanks,
Mark.Hey Robert,
Yes indeed we are paying for Oracle support? As far as I know I logged in through metalink in an effort to investigate this problem.
Our DBA upgraded from 10.2.0.4 to 10.2.0.1 and all the inconsistency went away thankfully.
Thanks for taking the time to reply to me,
Mark. -
Short Dump - Please let me know if Any Note is available for this
<unreadable text removed>
Moderator message: please search for applicable notes yourself.
Edited by: Thomas Zloch on Nov 24, 2011 12:14 PMPutting off the developer mode (in project properties) would supress this error, this is a developer mode exception.
In case you have modified code, then follow the intruction from the error to get rid of the error, even with developer mode set to true.
Thanks
Tapash -
Updated to iOS 5.0 / restore Backup from iOS 4.3.3 not possible!!!
Hi everybody!
On Saturday I changed my iPhone 4 on the new operating system iOS 5.0, here the steps as I proceeded:
Usind iTunes 10.5.0.142
1) I'm beginning to create a full backup (as the backup was still iOS 4.3.3).
2) Then I wanted to select the previously downloaded "iPhone3, 1_5.0_9A334_Restore.ipsw" update file (Shift-click the Update button and choose file).
3) In this process I was constantly getting back the error message "3002".
4) In various forums I have read to update the iPhone via Restore and choosing the "iPhone3, 1_5.0_9A334_Restore.ipsw" file (Shift-clicking the Restore button and choosing file) and then restore the previously created backup (from iOS 4.3.3) so that messages etc. will be retained.
5) The Update via Restore (Shift-clicking the Restore button and choosing file "iPhone3, 1_5.0_9A334_Restore.ipsw") works fine!
6) However, it can't restore the created Backup (from the iOS 4.3.3) because "it's broken or not compatible"
7) Downgrade to 4.3.3 iOS is no longer possible.
Can someone please help me?
I would be very grateful!
Thanks in advance.
Kind regards
dominikschnuffiI have been working on this for the last two days - and still no luck. Did a reset. Did a restore. Now I am doing "Set up as new phone." Not very hopeful, but will let you know. Even called the Apple Store, and they were no help. Does anyone have an answer?
-
Restore from server with Time Machine not possible
I am not able to do a Restore with the Recovery Drive and the Option "Restore from Time Machine Backup". If i try to connect to the appropriate Backup Drive on my Server Running Server Version 4 on OS X 10.10.1 i continue to have "With the connection to the Server a problem occurred, contact your System Administrator".
Any hints:
Recovery drive on iMac to be Recovered: OS X 10.10
on Server:
OS X 10.10.1 with Server Version 4 and Time Machine turned on.
Any hints?I try this:
1. Detach Backup Drive from Server (in my Case Lacie 4 Big)
2. Mount the Drive with Disk Utility and the dmg file to the iMac to be restored
3. Start restore
i know if this worked in 1h 15min -
Sending e-mail from Ical to mail is not possible?!
Hi out there!
I desperately need to know how I use the alarm from Ical where it sends me a reminder by mail. When I choose "send e-mail" in the "alarm-window" in my event it says something like this: "You have to add your own card to your e-mailadress in your adressbook before you can use post-alarms" (this is translated from danish)
Does anyone know what to do?
I have my own adress in my adressbook... How do I get ical to find it?
Any help will be very appreciated!
Thanks!I have the same problem and need an answer too.
-
Removing stripes from list view in Finder not possible?
I was just informed by the makers of Cocktail that you can no longer disable those nasty stripes in list view. Can anyone else confirm this? And if so why is there still an entry to disable it in the finder .plist file?
JI agree 100%. Why would Apple insist in stuffing down our throat such an ugly background is beyond me.
I "looked" around in the finder resources and there is this:
/Volumes/Leone/System/Library/CoreServices/Finder.app/Contents/Resources/English .lproj/ListView.nib
it's a compiled .nib, so it's not easy to look at it. The funny things is that if you read it as an xml file and compare it with a view brand new list view that has a striped background it seems that the bit for stripes is turned OFF by default. So maybe the stripes are changed procedurally not as a resource and maybe there is a way to change it.
I'm not good enough unfortunately to look in the Finder code to see if that is true -
Short Dump while fetching values from a Database view
Hi ALL,
Here is the code that is giving short dump
SELECT * FROM ZVMATLMOVE INTO TABLE I_MATLMOVE
WHERE BUDAT >= V_LASTRUN_DATE
AND WERKS IN S_WERKS
AND LIFNR IN S_LIFNR
AND EBELN IN S_EBELN
AND MATNR IN S_MATNR
AND BWART IN S_BWART
(Please don't say that I am using * in the select query,
I knew that it is not a good way of fetching values)
Declaration of the internal table is:
DATA I_MATLMOVE LIKE ZVMATLMOVE OCCURS 0 WITH HEADER LINE.
The variable V_LASTRUN_DATE is:
DATA V_LASTRUN_DATE LIKE SY-DATUM.
We will be getting the lastrundate value from another table. And it is passing correct value (ex. 20060731)
ZVMATLMOVE is a database view created for MKPF and MSEG table. And I checked both table were consistent.
Dump Analysis:
Runtime errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Every thing is fine. But I don't know how it is going to dump. Any suggestions?Hi !
It seams that your table is not correct / fully activated.
To check it out you should try the following:
- Go to the SE11
- Give it your table name and go to "Display"
- Check if the table is "active"
- Choose "Utilities->Database Object->Check" and see
if there are any errors
- go back and choose "Utilities->Runtime Object->Check"
and see if there are any errors
If there are any errors - try to activate the table again. You may need the "Utilities->Database Utiliy" for that.
After there are no more errors by checking all these your program should work.
Regards
Rainer
Some points would be nice if thate helped a bit. -
Hi Gurus,
When there is short dump is there a systematic procedure to solve the short dump apart from checking in ST22 so that we specify this short dump is error due to BAsis or due to BW .
Is there any thing that?
Please share some knowledge regarding short dumps?For sure its not always R/3 or its not always due to data.
BW: Dump due to Transformation code.
BAsis: Dump due to less table space.But having said its always hard for to identify if its due to table space or due to transformation so if you know how to identify them ,i would appreciate ur help -
I have created a dynamic program which would read any table name as input parameter and print the contents. Its working if I use a small table(3 fields) and the same program is throwing short dump if pass a big table.
Shortdump
"SAPSQL_SELECT_TAB_TOO_SMALL" C
"ZBW_DYNAMIC_ITAB1" or "ZBW_DYNAMIC_ITAB1"
"START-OF-SELECTION"
Error in the line below
61
62 * Select Data from table.
>>>>> select * into table <dyn_table>
64 from (p_table).
65
Program
*& Report ZBW_DYNAMIC_ITAB1
REPORT ZBW_DYNAMIC_ITAB1.
type-pools: slis.
field-symbols: <dyn_table> type standard table,
<dyn_wa>,
<dyn_field>.
data: alv_fldcat type slis_t_fieldcat_alv,
it_fldcat type lvc_t_fcat.
type-pools : abap.
data : it_details type abap_compdescr_tab,
wa_details type abap_compdescr.
data : ref_descr type ref to cl_abap_structdescr.
data: new_table type ref to data,
new_line type ref to data,
wa_it_fldcat type lvc_s_fcat.
selection-screen begin of block b1 with frame title text .
parameters: p_table(30) type c.
selection-screen end of block b1.
Get the structure of the table.
ref_descr ?= cl_abap_typedescr=>describe_by_name( p_table ).
it_details[] = ref_descr->components[].
loop at it_details into wa_details.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = wa_details-name .
wa_it_fldcat-datatype = wa_details-type_kind.
wa_it_fldcat-intlen = wa_details-length.
wa_it_fldcat-decimals = wa_details-decimals.
append wa_it_fldcat to it_fldcat .
endloop.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
Select Data from table.
select * from (p_table) into table <dyn_table>
Write out data from table.
loop at <dyn_table> into <dyn_wa>.
do.
assign component sy-index of structure <dyn_wa> to <dyn_field>.
if sy-subrc <> 0.
exit.
endif.
if sy-index = 1.
write:/ <dyn_field>.
else.
write: <dyn_field>.
endif.
enddo.
endloop.Hi,
The dynamic table that is generated is not converting the exact output length in case of packed numbers.
Foe eg : If there is an packed field of length 7 , the dynamic table is converting it to Char 7 , but the actual output length of Pack 7 is 15.Hence it is giving short dump saying that Internal Table length is not sufficient.
Probably it might have worked for smaller tables for you because you might not have used Packed field in there.
Regards,
Vijay. -
Short Dump CONVERSION_CODEPAGE_UNKNOWN
Dear All,
Can you help me?
When I create IT2001 and IT2011 (via tcode PA30), short dump occurred:
CONVERSION_CODEPAGE_UNKNOWN
Short text
Unable to convert from code page 'ÏÆ«o' to code page '4102'.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPFP50P" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
But this short dump is occurred only for several PERNR (not all PERNR).
How can I fix this?
Thank youhi
Its ECC5.0
Oracle DB
regards
venu
Maybe you are looking for
-
I can't open anything in Layout Object's in Dreamweaver CS6
Hi guys, I am very new and inexperienced on Dreamweaver. I am using a book to create a website using dreamweaver and I have come accross a problem when trying to open the Div Tag on Layout Options command. The Div Tag is grey as is all the other comm
-
Best practices for archiving a published app?
So say you've finally published your (single-folio) app with DPS. What's the best way to deal with that folio now, in the Folio Builder panel? (I made what was probably a mistake of building the final version using my primary dps account, not one set
-
How do I put Pictures in ny review
how do I import a picture to my question or answer or review plz reply
-
Buying new Macbook, Selling iBook - What to do about files?
Hi all, I heard there is a program where I can transfer all my files from my iBook to other laptops..is this true? If so, what is needed in terms of hardware/software? Also, since I am selling my old one, do I need to wipe out the harddrive? How woul
-
I have a new Mac 27 with two users. Both are admins. For the second user, it will not allow me to access the "Data" file on Time Capsule but instead tells me "The folder "Data" can't be opened because you don't have permission to see its contents."