Short Dump in ABAP program "SAPLOLEA" - in "AC_SYSTEM_FLUSH

Hi Can You tell me the reason and solution for this dump,
Information on where terminated
    Termination occurred in the ABAP program "SAPLOLEA" - in "AC_SYSTEM_FLUSH".
    The main program was "ZXXX ".
    In the source code you have the termination point in line 29
    of the (Include) program "LOLEAU02".

The only input I got from production is
User and Transaction
    Client.............. 300
    User................ "xxxxx"
    Language key........ "E"
    Transaction......... "Zaaa"
    Program............. "SAPLOLEA"
    Screen.............. "SAPLSLVC_FULLSCREEN 0500"
    Screen line......... 0
   Information on where terminated
    Termination occurred in the ABAP program "SAPLOLEA" - in "AC_SYSTEM_FLUSH".
    The main program was "Zaaaa ".
    In the source code you have the termination point in line 29
    of the (Include) program "LOLEAU02".

Similar Messages

What are the major situations to go to the short dump in abap programming?

What are the major situations to go to the short dump in abap programming?

Hi,
The major situations that an ABAP Program can result a dumb are as follows...
1) Poor coding i.e., if the data in the data base is less, then even a poor code can give you the result. But when you transport the program into Production, then there the same program will give you a dump, resulting 'TIMED OUT' error. So performance tunning is required for each and every program.
2) while calling a function module.
3) extracting of data into fields which are not type casted.
4) in case of x/y value, one should check the value of 'y' should not be zero, else a dump will result.
these are few which i can give for time being........

Short dump in standard program

Hi Friends,
below description is short dump for standard program.
Please see the below and help me how to correct the program.
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Internal error: Program   , include   , form   .
Technical information about the message:
Diagnosis
     An unexpected error has occurred.
Procedure
     If you can reproduce the error, contact the SAP Hotline quoting the
     error number.
Message classe...... "GR"
Number.............. 214
How to correct the error
Probably the only way to eliminate the error is to correct the program.
                                                                                You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPFGRWE" or "FGRWEF80_F80_FILL_COL_TAB"
"F80_FILL_COL_TAB"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
                                                                                2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
Thanks & Regards,
Sree
Edited by: adepus on Oct 7, 2009 12:39 PM
Edited by: adepus on Oct 7, 2009 12:39 PM

Hi Clemens,
I am getting a dump error as shown below. Could you please find some resolution for this issue. we just made some changes to the transaction GS02(Just added a GL account to one of the sets).
Runtime Error MESSAGE_TYPE_X
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
Short text of error message:
Internal error: Program , include , form .
Technical information about the message:
Diagnosis
An unexpected error has occurred.
Procedure
If you can reproduce the error, contact the SAP Hotline quoting the
error number.
Message classe...... "GR"
Number.............. 214
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPFGRWE" or "FGRWEF80_F80_FILL_COL_TAB"
"F80_FILL_COL_TAB"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Source Code
79 MESSAGE x214.
80 ENDIF.
81 PERFORM e08_read_object_index(sapfgsb0)
82 USING fcolumns-dim_index.
83 IF c-subrc 0. MESSAGE x214. ENDIF.
84 c_dsentry = c-tval-from.
85 IF c_dsentry '='.
86 READ TABLE data_fields BINARY SEARCH
87 WITH KEY tab = rep_table
88 dsentry = c_dsentry.
>>>> IF sy-subrc 0. MESSAGE x214. ENDIF.
90 ENDIF.
91 WHEN OTHERS.
92 c_dsentry = '*'.
93 ENDCASE.
94 ENDIF.
Regards,
Pavan

Short Dump-Syntax error program"CL_RSD_MULTIPROV==CP" after EHP1SP5 upgrade

Hi,
MultiProvider Activation/Display data is resulting into short dump with following text
Error in the ABAP Application Program
The current ABAP program "CL_RSD_MULTIPROV_CHECK========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSD_MULTIPROV==============CP " in include
"CL_RSD_MULTIPROV==============CM010 " in
line 1:
"Method "CHECK_LINITFL" is not declared or inherited in class "CL_RSD_M"
"ULTIPROV". -"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_RSD_MULTIPROV_CHECK========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
We have recently upgraded to EHP1SP5. We noticed this issue just after that.
Regards,
PD

Hi,
Please check the note 1461401.
1461401 - System error in the program CL_RSD_MULTIPROV_CHECK
This note should help you.
Regards,
Rafael

A short dump in the program with a certain error message...

Hi all,
I'd run a program to do an insertion into a customized table.
During the run, it popped up a short dump error messages below :
value larger than specified precision allows for this column#TC020 %M
I've search for that column #TCO20 .... and i couldn't find it in my custom table...
Why SAP gave such a hard description on the error found? I can't determine which field/column in my table that is causing the error dump during INSERT event in my program.
Is there any explanation on that message that could help me?
Thanks
William Wilstroth

Hi,
Better u seee again where u r getting error i the code . still if u r not getting see in dump analysys(ST22) and select
no:8 -- which is source code extract where u can get correct error inf.
Plz reply me.
Regards
Durgaprasad.

Short dump error in program SAPMV50A after modification

Dear gurus
i have done some modification in vl02n through Badi and it is working fine in Development server.
when i transport it to quality server and test it
it giving a short dump in vl02n while vl01n is working perfectly fine and showing my modification too..
below is the error mentioned
Database error text........: "Unsupported database type in parameter/column
    (168)."
   Internal call code.........: "[RSQL/READ/LIKP ]"
   Please check the entries in the system log (Transaction SM21).
   If the error occures in a non-modified SAP program, you may be able t
   find an interim solution in an SAP Note.
   If you have access to SAP Notes, carry out a search with the followin
   keywords:
   "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
   "SAPMV50A" or "MV50AFDB"
   "LIKP_SELECT"
   If you cannot solve the problem yourself and want to send an error
   notification to SAP, include the following information:
Please help
Regards
Saad Nisar

i have created two append structure in standard tables of LIKP & LIPS which are activated and so as LIKP and LIPS
my Badi is also activated and my customized program is also activated.
While making outbound delivery in Quality server it works fine but when i want to make changes in that created delivery it throws dump error
short text
   SQL error in the database when accessing a table.
issing RAISING Clause in Interface
   Program                                 SAPMV50A
   Include                                 MV50AFDB
   Row                                     14
   Module type                             (FORM)
   Module Name                             LIKP_SELECT
rigger Location of Exception
   Program                                 SAPMV50A
   Include                                 MV50AFDB
   Row                                     20
   Module type                             (FORM)
   Module Name                             LIKP_SELECT

Short dump Error-ABAP/4 Run time Error

Hi Expert,
Dump:ABAP/4 Processor:MESSAGE_TYPE_X Why this error came,I would like to Investigation on Perticular error,Please Some body give me an Exact answer,so that i closed the ticket.
Regards,
Raju.

Hi Suresh,
What is the actual issue?
When did you get this error.
To know about this type of error, check below link...
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=dump%3aABAP%2F4Processor%3A+MESSAGE_TYPE_X&adv=false&sortby=cm_rnd_rankvalue
Also check this:
Note 1016317 - SP13:PC: Start type 'Date & time' gets scheduled wrong
"Process chain scheduling results in dump- ABAP/4 processor: MESSAGE_TYPE_X"
Solution:
In the short dump analysis, the process fails at function module
RSS2_PSA_NEW_OLD_DS
call function 'RSDS_DATASOURCE_SINGLE_GET'
Regards,
KK.

Short Dump in Standard program for the INSERT Statement

Hi All,
In the Transaction FPCJ, when I click on the Button Close Cash Desk, I ma getting a short Dump.
The problem is in the Standard SAP program 'SAPLSUU1' and the include program is 'LSUU1F01'.
The reason is the code is trying to insert duplicate entries into a Data base table. And SAP is suggesting for a SAp NOTE.
The problem is when I am trying with the suggested dearch terms I get very large number of notes and I am unable
to zero down any single note.
If someone has worked on these or have any idea on the Note number, please share that with me.
Thans in advance.
Thanks & regards,
Y Gautham

Hi Nicole,
Thanks a lot! It actually worked.
Thanks & regards,
Y Gautham

Getting short dumps while reading bulky data from excel sheet

Hi all,
We have converted our non-unicode based sap system (R/3 4.7, Windows 2003,
SQL 2000) into a unicode based system recently. We are facing two peculiar
problems for last few days.
*Problem 1 - *Whenever we want to upload the data from excel sheet, the
system throws a dump after reading about 400 entries, while last week the
same system used to read about 8000 entries in a single go.
*Problem 2 - *Also, whenever we realease a transport requst from development
containing a lot of changes, the request will reach the quality system but
without the changes. but if i ll try to import the changes into quality
system after generating more than one request containing small small
changes, they get reflected in QAS immediately. Is there any size
constraint in transporting a request fro DEV->QAS->PRD.
Please suggest some ways.
I am pasting the dump (that I am getting while data uploading from Excel).
~~~~~~~~~~~~~~~~~~
Runtime errors
MESSAGE_TYPE_X*
Occurred on
22.02.2008 at
13:21:02*
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Short text of error message:
Control Framework : Error processing control
Technical information about the message:
Diagnosis
An error occurred when the system tried to process the commands
from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is
faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support
Package, the current kernel, and GUI patch for the release of your
System
2. Check whether the error occurs locally on one or a few PCs, or
generally on all PCs. Note whether the error only occurs for some
users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem
with the PC. Check the installation; if necessary, reinstall the
software. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Message classe...... "CNDP"
Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLOLEA" or "LOLEAU02"
"AC_SYSTEM_FLUSH"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "nhbho930"
Network address.......... "192.168.0.30"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "NHBHO930"
Database type............ "MSSQL"
Database name............ "DEV"
Database owner........... "dev"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 17 2007 00:18:58"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "196"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 300
User................ "NHBABAP"
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLOLEA"
Screen.............. "SAPMSDYP 0010"
Screen line......... 0
Information on where terminated
The termination occurred in the ABAP program "SAPLOLEA" in
"AC_SYSTEM_FLUSH".
The main program was "ZBDC_CONTRACT ".
The termination occurred in line 29 of the source code of the (Include)
program "LOLEAU02"
of the source code of program "LOLEAU02" (when calling the editor 290).
~~~~~~~~~~~~~~~~~~~~~
Thank you all.
Cheers.
Mitra __.____._

for the 50 millionth time: Excel spreadsheets are NOT databases, you should NOT try to use them as such and NEVER access them using JDBC.
You should also under NO condition use the JDBC-ODBC bridge driver (that was actually the 78 millionth time that was told someone).

Short dump in report generation for bex query

Hi,
I have e newly installed SAP NetWeaver 7.3 and I'm not able to run BEx-Queries. When I start transaction RSRT and try to generate the report for the selected bex query, I get the following short dump:
Category               ABAP Programming Error
Runtime Errors         RAISE_EXCEPTION
ABAP Program           SAPLRRSI
Application Component BW-BEX-OT
If I start the test in RSRV for that query I get:
Generation limits for the generated report
Unable to load report GPEM3XZBL2Y9VX9H6SN
Am I missing a profile parameter for that generartion limits or something else?
Thanks in advance!

Hi,
Check whether your SAP GUI is activated and installed correctly.
check following threads
Runtime error RAISE_EXCEPTION has occurred
Dump when activating Business Content 7.35
Thanks and regards
Kiran

Short Dump while activating Transformation through Program

HI All,
I am getting short dump while activating - Inactive Transformation through Program RSDG_TRFN_ACTIVATE.
However while i can activate single Transformation but if run without selection, I am getting this dump.
Short Description of Dump -
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
CL_RSAR_FORMULAS==============CP
Application Component BW-WHM-DST
Date and Time
Please Guide.
Prasad

Hi Prasad,
Have you changed the 'Object Status' from INA to ACT when using the program RSDG_TRFN_ACTIVATE?
You can also refer to the note SAP Note 1030987 - Activation of transformations dumps
regards,
Ashvin

ABAP short dump after BI upgrade

hi all,
While executing any program in SE38, it is giving Short dump while same program executing in SA38, it is executing .
Firstly, we got short dump in TCode - RSRT, while executing report.
Regards,
Prasad
Edited by: Prasad Mahindrakar on Apr 14, 2010 8:15 AM

Kindly find the Error, which is generating at time of Report Execution
Error Analysis:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
caught in
procedure "WRITE_DATA" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely "GP42LSZTOVG57DGEB7BO763P3PN ".
However, program "GP42LSZTOVG57DGEB7BO763P3PN " does not exist in the library.
Possible reasons:
a) Wrong program name specified in an external PERFORM or
SUBMIT or, when defining a new transaction, a new
dialog module or a new function module.
b) Transport error

Short Dump during Business Content Installation

Hi Gurus,
       I'm working on SAP BI 7.0. I'm getting a Short Dump Error stating " Program error: ASSIGN with length 0 in program "SAPLSNR3". " while I'm try to install the Business Content.
      I'm getting this error when I'm trying to install Business Content with Grouping Option " Data flow Before ", but I didn't face any problem when I started off with the Grouping Option " Only Necessary Objects ".
     I tried analysing this problem by going to ST22 transaction & during my analysis I found that in the said program " SAPLSNR3 ", there's LSNR3F01 include in which line number 178 is having a ASSIGN statement, where its trying to assign a computed value to some data variable. Now i understand that there's some problem with the value getting computed in the ASSIGN statement.
     I also tried finding some SAP Notes for the same problem, but to my misery I couldn't find anything appropriate. Could anyone of you who had faced similar problem help me out.
     For further assistance in making your replies much easier here in I'm adding the information about BI 7.0 system components.
           SAP ABAP:               Level 12
           SAP BASIS:               Level 12
           SAP BW:                   Level 14
           Business Content:       Level 5
Waiting for a early solution from U guyz.........
Regards,
Syed Shujaath Ali.

Hi,
Apply SAP BW: Level 19 or 20
Business Content: 10
patches .

ABAP PROGRAM to run a process chain

Hello all,
What is the ABAP program to run a process chain after a step that has failed but is manually corrected?
In short a std ABAP program to run a pc.
Regards,
NIKEKAB

Hi.
Plz see my answer to similar question in [this thread|Re: Manage a message at the end of process chain on Web planning Application].
Regards.

Short dump using CS_BOM_EXPL_MAT_V2 with different user ids

Hi
We are getting a short dump in our program when using FM'CS_BOM_EXPL_MAT_V2' and this is happening only for super user roles but not with regular user ids in production. We are not able to identify the solution yet, and it needs to be resolved as quickly as possible. Anyhelp, really appreciated.
Thanks
Anil
Here is our code:
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      aumgb                 = 'X'
      capid                 = 'PP01'
      datuv                 = p_valfrm
      ehndl                 = '1'
      emeng                 = 1
      mbwls                 = ' '
      mehrs                 = 'X'
      mmory                 = '1'
      mtnrv                 = p_matnr
      stlal                 = p_stlal
      stlan                 = p_stlan
      werks                 = p_werks
    TABLES
      stb                   = i_stb
      matcat                = i_matcat
    EXCEPTIONS
      alt_not_found         = 1
      call_invalid          = 2
      material_not_found    = 3
      missing_authorization = 4
      no_bom_found          = 5
      no_plant_data         = 6
      no_suitable_bom_found = 7
      conversion_error      = 8
      OTHERS                = 9.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.

Hi senthil,
1. I suppose u want to explode the BOM.
2. CS_BOM_EXPLOSION
   use the above FM
   in the below mentioned fashion.
3.
CALL FUNCTION 'CS_BOM_EXPLOSION'
   EXPORTING
   capid                       = 'PP01'
   emeng                       = bmeng
   datuv                       = sy-datum
   mtnrv                       = matnr
   stlan                       = '1'
     werks                       = werks
     mehrs = 'X'
IMPORTING
TOPEQUI                     =
TOPMAT                      =
TOPTPL                      =
DSTST                       =
    TABLES
      stbd                        = stbd
      stbe                        = stbe
      stbk                        = stbk
      stbm                        = stbm
      stbp                        = stbp
      stbt                        = stbt
EXCEPTIONS
   alt_not_found               = 1
   call_invalid                = 2
   missing_authorization       = 3
   no_bom_found                = 4
   no_plant_data               = 5
   no_suitable_bom_found       = 6
   object_not_found            = 7
   conversion_error            = 8
   OTHERS                      = 9
regards,
amit m.

Short Dump in ABAP program "SAPLOLEA" - in "AC_SYSTEM_FLUSH

Similar Messages

Maybe you are looking for