Short Dump when loading Data into Cube UNCAUGHT_EXCEPTION(Pls Help)

Dear Guru's
i am trying to load data into a Cube from a ODS and the load gets dump...
In Dump Analysis.....
The exception 'ZCX_EDW_MAP_ROOT' was raised, but it was not caught anywhere
along
"UNCAUGHT_EXCEPTION" "ZCX_EDW_MAP_ROOT"
"ZCL_EDW_MAP_ROOT==============CP" or "ZCL_EDW_MAP_ROOT==============CM002"
"LOAD_MAPPING_INFOPROV"
So it would be great if some one can give me some suggestion to handle this issue
Thanks in Adv
Dev

Dear Arun,
i have checked the routine there exists some code
Eg: data: vref_monitor type ref to zcl_edw_monitor,
But to say fact i ddnot i understood it....
Any suggestions dude...pls
thanks in adv
Dev

Similar Messages

ABAP short dump when loading data into Infocube

Hello All,
I am getting an ABAP short dump error when loading data into Infocube. I tried to load data from PSA and ODS.
I ran the code to compress the Infocube, no improvement still getting the same error.
Error Analysis:
A raise statement in the program "SAPLRSDU_PART" raised in the exception.
Internal Notes:
The termination occured in the function "ab_i fune" of the SAP Basis system. Specifically in the line 2316 of the module "//bas/620/src/krn/runt/abfunc. C#18".
The internal operation just processed is "FUNE"
Advance thanks !!!
Siv

Hello Siv,
try to run program SAP_DROP_EMPTY_FPARTITIONS to display existing partitions. Then compare it to the number of uncompressed requests. Maybe there's a mismatch.
SAP notes that might help: 385163, 590370
Regards,
Marc
SAP NetWeaver RIG, US BI

Short Dump when loading data (Runtime Error ITAB_DUPLICATE_KEY) Urgent Pls

Dear Guru
We are loading data into (2 ODS and ! Cube) from one Infopkg.
When i do delta update it throws following error
(for one ODS it is green) and for another ODS and CUBE it is red.
Runtime Error          ITAB_DUPLICATE_KEY
What happened?
Error in ABAP application program.
The current ABAP program "GP229LMXTFYDS5X6UC3ND03NIV2" had to be terminated
because one of the
statements could not be executed.
Please suggest me some solution, i am with client..its a serious issue now.
Hope you understand
Thanks in Adv
Dev

hi,
hope if you retrigger the load it would be successful.
force the request status to red and delete from the all target and retrigger the load.
else chk if in the detail tab u could find the data upto PSa. if so delete the red request alone and pull the records to tohose records from PSA.
Ramesh

Short Dump while loading data into the GL ODS

Hello Guyz
I am getting a database error while loading the GL ODS in BW. I am performing an INIT load, and the error occurs during the activation stage:
Database Error

Hello Atul,
PSAPTEMP has nothing to do with PSA. It is a temporary storage space and is present in all systems.
You can check this in transaction DB02 if you are using Bw 3.x and DB02OLD if you are using BI 7.0. Once in DB02/DB02OLD, you will see a block which says tablespaces. In this block, there is a push button for freespace statistics, click on it and it will take you to a screen which shows the free space for all tablespaces.
Hope this helps,
Regards.

GETWA_NOT_ASSIGNED short dump when load business partner master data

Hi
I've this error GETWA_NOT_ASSIGNED short dump when load business partner master data, it's running in BI 7.0 with support package 12.
The error is because the field symbol is that pointed to the line of an internal table that was deleted.
I think that it's an incompatibility between subroutine and unicode.
Do you have idea about correct this error?
Regards
Jose.

Hi Ravi
Yes, it's a dump
It's when running a process chain to load Business partner master data
The error say:
-.You address a field symbol that pointed to the line of an internal table that was deleted.
-.You address a field symbol that was previously reset using UNASSIGN or that pointed to a local field that no longer exist.
-. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
I think that it's for the unicode corversion because I've the last support package 12 installed and the rest of the process chain are running perfect.
My hotmail mail is [email protected] if you need the screen shot.
Regards and thanks a lot
Jose

Regarding Short Dump While loading data from DB Connect

Dear All,
We are having an issue of getting short dump while loading data from DB Connect to BW. We were able to load the data into BW Dev using the same data source without any problem. Whereas in Production, I am getting the following error:
Runtime Error PERFORM_CONFLICT_TAB_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
What could be the reason for the error that I am getting

hi,
Refer Note 707986 - Writing in trans. InfoCubes: PERFORM_CONFLICT_TAB_TYPE
Summary
Symptom
When data is written to a transactional InfoCube, the termination PERFORM_CONFLICT_TAB_TYPE occurs. The short dump lists the following reasons for the termination:
("X") The row types of the two tables are incompatible.
("X") The table keys of the two tables do not correspond.
Other terms
transactional InfoCube, SEM, BPS, BPS0, APO
Reason and Prerequisites
The error is caused by an intensified type check in the ABAP runtime environment.
Solution
Workaround for BW 3.0B (SP16-19), BW 3.1 (SP10-13)
Apply the attached correction instructions.
BW 3.0B
Import Support Package 20 for 3.0B (BW3.0B Patch20 or SAPKW30B20) into your BW system. The Support Package is available oncenote 0647752 with the short text "SAPBWNews BW3.0B Support Package 20", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
Import Support Package 14 for 3.10 (BW3. 10 Patch14 or SAPKW31014) into your BW system. The Support Package is available once note 0601051 with the short text "SAPBWNews BW 3.1 Content Support Package 14" has been released for customers.
BW3.50
Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available once note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, has been released for customers.
The notes specified may already be available to provide advance information before the Support Package is released. However, in this case, the short text still contains the term "Preliminary version" in this case.
Header Data
Release Status: Released for Customer
Released on: 18.02.2004 08:11:39
Priority: Correction with medium priority
Category: Program error
Primary Component: BW-BEX-OT-DBIF Interface to Database
Secondary Components: FIN-SEM-BPS Business Planning and Simulation
Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_BW 30 30B 30B
SAP_BW 310 310 310
SAP_BW 35 350 350
Support Packages
Support
Packages Release Package
Name
SAP_BW_VIRTUAL_COMP 30B SAPK-30B20INVCBWTECH
Related Notes
693363 - SAPBWNews BW SP03 NW'04 Stack 03 RIN
647752 - SAPBWNews BW 3.0B Support Package 20
601051 - SAPBWNews BW 3.1 Content Support Package 14
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Ref.
Correction Last
Modifcation
301776 30B 350 SAP_BW J19K013852 18.02.2004 08:03:33
Attributes
Attribute Value
weitere Komponenten 0000031199
Thanks
(Activate ODS/Cube and Transfer rules again..)

Getting an error while trying to load data into cube

Hello,
I am trying to load data into cube but it gives me following error:
fiscal year variant not expected.
Can someone tell what could be done on fiscal year
Cheers
Jim.

Hi,
May be you have not mapped anything to fiscal variant or not included fiscal variant in the cube but you have used fiscal period inside it.
You should load fiscal variant if you wanna use fiscal period.
Map fiscal variant to a constant K4 or from the source if present and then see the result.
Generally it is K4 except for FI-CO cubes .
In the transfer rules, select field '0fiscvarnt' 'Tp' click
Enter K4 for Constant................Save and Activate
Iam sure you'd fix the issue.
Regards,
Ray

Error while loading data into cube

hi BW gurus,
when ever i am trying to load data into the cube from flat file after scheduling iam getting short dump in BW system. I checked it in st22 it is giving me a error as exception add_partition_failed. please help me to sort out this problem. If you know the error recovery please give me the answer in detail.
I will assign points for good answers.

This is what the note says:
Symptom
The process of loading transaction data fails because a new partition cannot be added to the F fact table.The loading process terminates with a short dump.
Other terms
RSDU_TABLE_ADD_PARTITION_ORA, RSDU_TABLE_ADD_PARTITION_FAILED, TABART_INCONSITENCY, TSORA, TAORA , CATALOG
Reason and Prerequisites
The possible causes are:
SQL errors when creating the partition
Inconsistencies in the Data Dictionary control tables TAORA and TSORA
Solution
BW 3.0A & BW 3.0B
In the case of SQL errors:Analyze the SQL code in the system log or short dump and if possible, eliminate the cause. The cause is often a disk space problem or lock situations on the database catalog or, less frequently: the partitioning option in the ORACLE database is not installed.
The most common cause of the problem is inconsistencies in the TAORA and TSORA tables. As of Support Package 14 for BW 3.0B/Support Package 8 for BW 3.1C, the TABART_INCONSITENCY exception is issued in this case. The reason is almost always missing entries in TSORA for the tablespaces of the DDIM, DFACT and DODS data classes.
The TAORA table contains the assignment of data classes to data tablespaces and their attributes, for example:
Tablespace Data class
DDIM PSAPDIMD ........
DFACT PSAPFACTD ........
DODS PSAPODSD .......
Foreach data tablespace, the TSORA table must contain an entry for the corresponding index tablespace, for example:
TABSPACE INDSPACE
PSAPDIMD PSAPDIMD
PSAPFACTD PSAPFACTD
PSAPODSD PSAPODSD
In most cases, these entries are missing and have to be added. See also notes 502989 and 46272.

Reg:loading data into cube getting error

Hi,
When i am loading data intothe cube i am getting following error.
record1:fiscal year variant not expected.
error 4 update.

Recently, I experienced following error:
fiscal year variant K4 not expected.
following process fixed my issue
In the transfer rules, select field '0fiscvarnt' 'Tp' click
Enter K4 for Constant................Save and Activate
Also check the following-------
in R/3 (SE16), make sure K4 exists in table T009
in Bw, select source system --> transfer global settings

Error while loading data into cube 0calday to 0fiscper (2lis_13_vdcon)

Hi all,
I m getting following error while loading the data into cube.
"Time conversion from 0CALDAY to 0FISCPER (fiscal year V3 ) failed with value 10081031"
amit shetye

Hi Amit,
This conversion problem. Calender not maintained for Fiscal variant "V3", for Year: 1008.
Maintain calender for year: 1008 and transfer global setting from soruce(R/3).
RSA1--> Source systems --> from context menu --> transfer global settings > choose fiscal year variants and calender> execute
Hope it Helps
Srini

Error in viewing successfully loaded data into cube..

hi gurus,
I had a problem on viewing my data into cube. These data were successfully loaded from LIS environment. The errors i had received were 'Your user master record is not sufficiently maintained for object Commodity and Company Code Auth object'..'System error: RSDRC / FORM AUTHORITY_CHECK USER NOT AUTHORIZED ZFIN___ ZFIN___'... 'System error: RSDRC / FUNC RSDRC_BASIC_CUBE_DATA_GET ERROR IN RSDRC_BASIC_QUERY_DATA_GET ZFIN____ 64' ... 'System error: RSDRC / FORM DATA_GET ERROR IN RSDRC_BASIC_CUBE_DATA_GET ZFIN____ 64 ...
Does anybody encounters these errors? Can you give me step by step procedure on how to deal on this errors?

This thread will solve your problem. look for Bhanu's post in it.
Re: Cube Security

Error when loading data into Planning

Unable to load data into planning 11.1.2.3.200 using ODI 11.1.1.7
Please find the errors from below logs:
INFO [SimpleAsyncTaskExecutor-2]: Oracle Data Integrator Adapter for Hyperion Planning
INFO [SimpleAsyncTaskExecutor-2]: Connecting to planning application [xxxxxxx] on [xxxxxxxxxxx]:[xxxx] using username [admin].
INFO [SimpleAsyncTaskExecutor-2]: Successfully connected to the planning application.
INFO [SimpleAsyncTaskExecutor-2]: The load options for the planning load are
Dimension Name: Account Sort Parent Child : false
Load Order By Input : false
Refresh Database : false
INFO [SimpleAsyncTaskExecutor-2]: Begining the load process.
DEBUG [SimpleAsyncTaskExecutor-2]: Number of columns in the source result set does not match the number of planning target columns.
INFO [SimpleAsyncTaskExecutor-2]: Load type is [Load dimension member].
ERROR [SimpleAsyncTaskExecutor-2]: Record [[A603010, null, null, null, null, null, null, null, null, null, null, null, xxxxx, -100, F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null]] was rejected by the Planning Server.
ERROR [SimpleAsyncTaskExecutor-2]: Record [[A601060, null, null, null, null, null, null, null, null, null, null, null, xxxxx, -250, F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null, null]] was rejected by the Planning Server.
log.err
Account,Data Load Cube Name,Budget,Point-of-View,Error_Reason
A603010,xxxxx,-100,F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul,Cannot load dimension member, error message is: RemoteException occurred in server thread; nested exception is:
java.rmi.UnmarshalException: unrecognized method hash: method not supported by remote object
A601060,xxxxx,-250,F3E0,C011,E7172_93275,FY17,Stage 1,Current Service Level,Jul,Cannot load dimension member, error message is: RemoteException occurred in server thread; nested exception is:
java.rmi.UnmarshalException: unrecognized method hash: method not supported by remote object
FDMEE log:
ERROR [AIF]: Error: No records exist for Period 'Pd 2 - 2014-08-01'
ERROR [AIF]: Error: No records exist for Period 'Pd 3 - 2014-09-01'
FDMEE Logging Level is set to 5

Are you sure that you haven't got Planning 11.1.2.3.500 in your environment? This sounds spookily similar to the issue described in note 1678759.1 which was seen after applying Planning 11.1.2.3.500. If it's definitely Planning 11.1.2.3.500 is there any chance that someone has applied ODI patch 18687916 to the ODI home (C:\Oracle\Middleware\odi)?
If you /*are*/ running Planning 11.1.2.3.500 then you might need to apply patch 18687916 to C:\Oracle\Middleware\odi - you might need note 1683307.1 to take some of the pain out of applying this patch though.
Given the error that you're seeing though there's a mismatch in versions of JAR files between ODI and the Planning server somewhere.
Regards
Craig

Dump when loading Data from DSO to Cube

Hi,
i get a short dump DBIF_REPO_PART_NOT_FOUND when trying to load data from a dso to a cube. From DSO to DSO it works fine.
any idea`s?
thx!
Dominik

the Dump occurs in the last step of the last data pakage in the DTP Monitor.
I checked the OSS note, but i don´t know how to check the kernel version.
Now i used another DSO for testing and i got another Dump with a different name.
After that i logged in again and it works with my test DSO data...
But still not working with the original one...
@Kazmi: What detaisl u mean exactly?

Short dump while loading data in to Bw using Process Chain.

got the problem in the Production System.......... I won't get any confirmation from my customer to debug the program in the Poduction.
In BW I have to load the data every day using the process chain. in the monitor I can't find any problem every thing is working fine. status is green.. and loads the data into ODS successfully. But the job runs more than 6 Hrs and automatically an E-mail is sent to us that the processing takes long time.But it loads the data successfully into ODS.
Since 10 days everyday we got a mail with the same problem. My customer asked me tTo analyse the problem.
I check the short dump there I found that due to some problem the program get intrupted.
<b>the short dump</b>
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_INFOCUBE) TYPE RSINFOCUBE
*" EXCEPTIONS
*" ILLEGAL_INPUT
*" REQUEST_NOT_CLOSED
*" INHERITED_ERROR
DATA: l_s_cube TYPE rsd_s_cube,
l_t_dummy TYPE rsdri_t_rfcdata,
l_s_rsapoadm TYPE rsapoadm,
l_nothing_found TYPE rs_bool.
get type of cube
CALL FUNCTION 'RSD_CUBE_GET_ONLY_DB'
EXPORTING
i_infocube = i_infocube
i_objvers = rs_c_objvers-active
i_with_atr_nav = rs_c_false
i_with_message = rs_c_false
IMPORTING
e_s_cube = l_s_cube
EXCEPTIONS
infocube_not_found = 1
illegal_input = 2
OTHERS = 3.
CASE sy-subrc.
WHEN 0.
WHEN 1.
RAISE illegal_input
WHEN OTHERS.
RAISE inherited_error.
ENDCASE.
In the short dump I observed that the porgram get intrupted at RAISE illegal_input when sy-subrc = 1.
I have to analyse this. problem........ whay is so happened...............
Any one of you face the same problem............... if so please let me give your valuble suggestions regarding this.
Cheers
sailekha

Looks like it reaches the water mark level thats why you are getting message.

Short dump while loading data

Hi All,
I am getting this error message while loading data in BW. The eeror message is below:
Data not received in PSA Table.
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump.
When I checked the short dump it is as below.
ShrtText
An SQL error occurred when accessing a table.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer termination messages, especially those beyond their normal deletion date.
How to correct the error
    Database error text........: "ORA-14400: inserted partition key does not map to any partition"
    Internal call code.........: "[RSQL/INSR//BIC/B0000541000 ]"
    Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search criteria:
How to correct the error
    Database error text........: "ORA-14400: inserted partition key does not map to any partition"
    Internal call code.........: "[RSQL/INSR//BIC/B0000541000 ]"
    Please check the entries in the system log (Transaction SM21).
    You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search
    "DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
    "GP12DW003276UZE34XM7O2QXLER" or "GP12DW003276UZE34XM7O2QXLER"
    "INSERT_ODS"
Can someone suggest me what should I check?
Thanks in advance.

Thanks a lot Manga. I did what you told and it gave me this error message.
Inconsistency: High value for table /BIC/B0000541000: 0002 ; PARTNO value in RSTSODS: 0022
So you mean to say once I click on correct error button, it should be good. So after that if do the loading, it should not give me this problem if I am right.
But can you tell me what exactly does that error message mean? Also is this not an table space issue. I have to wait to correct that error as DBA is currently looking into it.
Assigned points. Will assign more points if the issue resolves.

Short Dump when loading Data into Cube UNCAUGHT_EXCEPTION(Pls Help)

Similar Messages

Maybe you are looking for