Short Dumps in standard HR Business Event Group/Event creation transactions
Dear All,
I m getting short dumps whlile executing standard HR transactions for Creation of Business Event Groups and Business Event Types. Attaching the Short Dump text herewith. Can anyone plz. help...
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "RH_BASE_READ_INFTY_NNNN" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Eine Open SQL-Klausel wurde dynamisch angegeben. Der darin auftretende
Feldname "SUBTY" kommt in keiner der Datenbanktabellen aus der
FROM-Klausel vor.
Thanks and Regards,
Sudipto.
Hi,
Check whether the OSS note 207515 is suitable for the below situation.
Summary
Symptom
A dump occurs in program SAPLRHDB: DBIF_NTAB_TABLE_NOT_FOUND
Additional key words
RH_BASE_READ_INFTY_NNNN, LRHDBU16
Cause and prerequisites
The system wants to access table HRPnnnn particularly by means of an entry in the infotype check table T777D. This access can be processed in various places, including in the profile generator. Here, a termination occurs if the 'ent' table/structure in the dictionary is no longer available. This generally affcts customer-specific infotypes. These have been created and possibly deleted again. However, the entry in table T777D is not available. You can also import the entry into another system with a transport of the table. If the HRP table/structure is then missing, a termination may also occur in this case.
Solution
You must check on an individual basis which infotype the termination refers to. If it is a customer-specific infotype, the customer is responsible for removing the cause of the termination. If the table entry is a 'remnant', the entry can simply be deleted.
If the termination refers to an SAP structure, you should consult SAP before carrying out any further activities.
Source code corrections
Header Data
Release Status: Released for Customer
Released on: 23.03.2000 23:00:00
Priority: Recommendations/additional info
Category: Customizing
Primary Component: PA-BC Basis
Releases
Release Independant
Satya
Similar Messages
-
Short dump in standard program
Hi Friends,
below description is short dump for standard program.
Please see the below and help me how to correct the program.
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Internal error: Program , include , form .
Technical information about the message:
Diagnosis
An unexpected error has occurred.
Procedure
If you can reproduce the error, contact the SAP Hotline quoting the
error number.
Message classe...... "GR"
Number.............. 214
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPFGRWE" or "FGRWEF80_F80_FILL_COL_TAB"
"F80_FILL_COL_TAB"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Thanks & Regards,
Sree
Edited by: adepus on Oct 7, 2009 12:39 PM
Edited by: adepus on Oct 7, 2009 12:39 PMHi Clemens,
I am getting a dump error as shown below. Could you please find some resolution for this issue. we just made some changes to the transaction GS02(Just added a GL account to one of the sets).
Runtime Error MESSAGE_TYPE_X
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
Short text of error message:
Internal error: Program , include , form .
Technical information about the message:
Diagnosis
An unexpected error has occurred.
Procedure
If you can reproduce the error, contact the SAP Hotline quoting the
error number.
Message classe...... "GR"
Number.............. 214
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPFGRWE" or "FGRWEF80_F80_FILL_COL_TAB"
"F80_FILL_COL_TAB"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
Source Code
79 MESSAGE x214.
80 ENDIF.
81 PERFORM e08_read_object_index(sapfgsb0)
82 USING fcolumns-dim_index.
83 IF c-subrc 0. MESSAGE x214. ENDIF.
84 c_dsentry = c-tval-from.
85 IF c_dsentry '='.
86 READ TABLE data_fields BINARY SEARCH
87 WITH KEY tab = rep_table
88 dsentry = c_dsentry.
>>>> IF sy-subrc 0. MESSAGE x214. ENDIF.
90 ENDIF.
91 WHEN OTHERS.
92 c_dsentry = '*'.
93 ENDCASE.
94 ENDIF.
Regards,
Pavan -
How can BI recognize business event into transactional environment?
Dear colleagues:
As I have been looking forward to figure out BW based BAM solutions, such as to implement BW to recognize business event into Transactional applications I just found the TechEd 2008 BPX Community winner proposal Operational BI-Embedded Business Activity Monitoring Drives Sales Growth and Empowers CRM Campaigns, by Anshuman Kumar (congratulations!)
However, it will take a long time to September and as I need very much to hurry up on architecting a BW based BAM solution I was wondering if someone else has implemented solution like that to exchange more detailed information, as Event Recognition, or even if Mr. Kumar could provide information regarding his presentation in advance.
Best Regards
Waldemar Gonsales u2013 SpeedyHi Kiran,
Depending on your SAP release, you may have a wizard to instantiate an object reference. This basically creates a standard task based on object method System.GenericInstantiate (or something similer - I currently do not have access to the system). You need the object key available in the WF container to do this. It could be tricky if the object key is multipart. Once an object reference is available in the WF container, you can wait for an event of that object.
Cheers,
Ramki Maley. -
Short Dump in Standard program for the INSERT Statement
Hi All,
In the Transaction FPCJ, when I click on the Button Close Cash Desk, I ma getting a short Dump.
The problem is in the Standard SAP program 'SAPLSUU1' and the include program is 'LSUU1F01'.
The reason is the code is trying to insert duplicate entries into a Data base table. And SAP is suggesting for a SAp NOTE.
The problem is when I am trying with the suggested dearch terms I get very large number of notes and I am unable
to zero down any single note.
If someone has worked on these or have any idea on the Note number, please share that with me.
Thans in advance.
Thanks & regards,
Y GauthamHi Nicole,
Thanks a lot! It actually worked.
Thanks & regards,
Y Gautham -
Short dump while on double click event in ALV
Hi ,
I have created a ALV screen to display the customer number and NAme ,my requirement is that when i click on the Key field i.e. Customer number it should call the transaction xd03 for that I have written the following code
gs_layout-box_fieldname = 'SEL'.
gs_layout-colwidth_optimize = 'X'.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
is_layout = gs_layout
it_fieldcat = fieldcatalog[]
i_callback_pf_status_set = 'PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
TABLES
t_outtab = t_itab
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
IF rs_selfield-fieldname = 'KUNNR'.
READ TABLE t_itab INTO w_itab
WITH KEY kunnr = rs_selfield-value.
IF sy-subrc = 0.
SET PARAMETER ID 'KUN' FIELD rs_selfield-value.
CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
ENDIF.
ENDIF.
CLEAR r_ucomm.
ENDCASE.
ENDFORM. "user_command
FORM pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'STANDARD1'.
ENDFORM. "pf_status
Problem is when i double click on the Customer No field on the ALV ouput i Am getting a Short dump.. "MOVE_TO_LIT_NOTALLOWED_NODATA"..
How should i overcome this runtime error....
Thanks in advance,
Nishant>
Abhii wrote:
> There was a problem in the SET PARAMETER ID statement.
> Nishant, Make the code changes I have suggested, you will get the output.
Either you possess telepathic skills or you are omniscient.
Before asserting your solution on someone be sure what exactly is the problem. If you check the OP's code, CALL TRANSACTION will be called only when the READ TABLE is successful.
So how does your solution add benefit to the existing one.
BR,
Suhas -
Regarding business event Creation
Hi folks,
My requirement is to create a workflow using business event. It is done and working as expected in 'development' instance.
Next I need to move the workflow and implement the business events in 'Production' instance. But am not having the sysadmin login credentials for production and it is the option to create to business events.
Kindly suggest me any other solution for this
Thanks in advanceYou can do this via command line WFXLoad utility but you will need the apps scheme password.
In the source environment, where the event and its subscriptions are define, download the data as follows:
- Download business event definition
java oracle.apps.fnd.wf.WFXLoad -d apps <passwd> <db server name>:<port>:<SID> thin US eventDef.wfx EVENTS <event name>
example
java oracle.apps.fnd.wf.WFXLoad -d apps apps myserver.oracle.com:8068:PROD thin US myEvent.wfx EVENTS oracle.apps.fnd.wf.myevent.created
- Download business event subscriptions
java oracle.apps.fnd.wf.WFXLoad -d apps <passwd> <db server name>:<port>:<SID> thin US eventSubs.wfx SUBSCRIPTIONS <event name>
In the target instance, where you do not have access to events studio:
- Upload business event definition
java oracle.apps.fnd.wf.WFXLoad -u apps <passwd> <db server name>:<port>:<SID> thin US eventDef.wfx
- Upload business event subscriptions
java oracle.apps.fnd.wf.WFXLoad -u apps <passwd> <db server name>:<port>:<SID> thin US eventSubs.wfx
In the syntax I used eventDef.wfx and eventSubs.wfx but you can use any file name.
Regards,
Alejandro -
I have a requirement to raise a business event . when PO is approved, PO is closed or PO is cancelled. Can someone tell me if we have standard oracle business events which can be triggered.
Also i have a requirement to raise a business event when PO receipt is created or updated.
Please let me know ASAP.
Thanks in Advance
ShilpaHello
What do you call a business event ? Can you explain us further, and/or illustrate by an example please ?
Thanx,
Xavier -
Short Dump during Business Content Installation
Hi Gurus,
I'm working on SAP BI 7.0. I'm getting a Short Dump Error stating " Program error: ASSIGN with length 0 in program "SAPLSNR3". " while I'm try to install the Business Content.
I'm getting this error when I'm trying to install Business Content with Grouping Option " Data flow Before ", but I didn't face any problem when I started off with the Grouping Option " Only Necessary Objects ".
I tried analysing this problem by going to ST22 transaction & during my analysis I found that in the said program " SAPLSNR3 ", there's LSNR3F01 include in which line number 178 is having a ASSIGN statement, where its trying to assign a computed value to some data variable. Now i understand that there's some problem with the value getting computed in the ASSIGN statement.
I also tried finding some SAP Notes for the same problem, but to my misery I couldn't find anything appropriate. Could anyone of you who had faced similar problem help me out.
For further assistance in making your replies much easier here in I'm adding the information about BI 7.0 system components.
SAP ABAP: Level 12
SAP BASIS: Level 12
SAP BW: Level 14
Business Content: Level 5
Waiting for a early solution from U guyz.........
Regards,
Syed Shujaath Ali.Hi,
Apply SAP BW: Level 19 or 20
Business Content: 10
patches . -
Short dump in BIW 7.0 business content installation
Dear Friends,
I am trying to install business content in BIW 7.0 . In RSA1 ->BI Content --> Object Types > Query Elements> Grouping data flow before ---> Install.
Once I start this installation process it gives short dump.
The dump says
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_RSD_IOBJ_VERS==============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: " ").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
Can anybody tell me why this dump occures. Am I missing any step in BI installation.
Regards,
MahendraHi ,
If any one wants to install BIW 3.5 with R/3 4.7 (for extraction) connection in single hard disk, please call me on 9342820370.
Installation charge:1000/
Hard disc req: 160 GB.
ram: 1 gb
Thanks,
Laxman rao.
9342820370
#551,26 th main,
BTM ,Bangalore. -
Short dump "Time limit exceeded" when searching for Business Transactions
Hello Experts,
We migrated from SAP CRM 5.2 to SAP CRM 7.0. After migration, our business transaction search (quotation, sales order, service order, contract etc) ends with the short dump "Time limit exceeded" in class CL_CRM_REPORT_ACC_DYNAMIC, method DATABASE_ACCESS. The select query is triggered from line 5 of this method.
Number of Records:
CRMD_ORDERADM_H: 5,115,675
CRMD_ORDER_INDEX: 74,615,914
We have done these so far, but the performance is still either poor or times out.
1. DB team checked the ORACLE parameters and confirmed they are fine. They also checked the health of indices in table CRMD_ORDER_INDEX and indices are healthy
2. Created additional indices on CRMD_ORDERADM_H and CRMD_ORDER_INDEX. After the creation of indices, some of the searches(without any criteria) work. But it takes more than a minute to fetch 1 or 2 records
3. An ST05 trace confirmed that the selection on CRMD_ORDER_INDEX takes the most time. It takes about 103 seconds to fetch 2 records (max hits + 1)
4. If we specify search parameters, say for example a date or status, then again we get a short dump with the message "Time limit exceeded".
5. Observed that only if a matching index is available for the WHERE clause, the results are returned (albeit slowly). In the absence of an index, we get the dump.
6. Searched for notes and there are no notes that could help us.
Any idea what is causing this issue and what we can do to resolve this?
Regards,
BalaHi Michael,
Thanks. Yes we considered the note 1527039. None of the three scenarios mentioned in the note helped us. But we ran CRM_INDEX_REBUILD to check if the table CRMD_ORDER_INDEX had a problem. That did not help us either.
The business users told us that they mostly search using the date fields or Object ID. We did not have any problem with search by Object ID. So we created additional indices to support search using the date fields.
Regards,
Bala -
Short dump while executing report group.
Hi,
We are upgrading to ECC6.0 from 4.6C
Now while testing the report group i got short dump.
This is due to to the 'Exception condition "LOAD_PROBLEMS" raised.'
Error analysis
A RAISE statement in the program "SAPLSLDB" raised the exception
condition "LOAD_PROBLEMS".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
Function module 'SELOPTS_AND_PARAMS' in this that statement was there.
Can some one help me out. what i have to do further.
Thanks in advance.
Regards,
Deepak.Hi Hemanth,
Actually what I analysed is what ever the exception raised due to this sy-subrc that exception i think the superior program is not receiving. I think due to this it is going for short dump.
Let me know if you have any idea further.
Thanks,
Deepak.
Message was edited by:
Deepak Kudaravalli -
Standard Business Event issue in SOA.
Hi,
I created a subscription in SOA for the standard business event (*oracle.apps.jtf.cac.task.updateTask*) using Oracle Apps Adapter. When the event is fired in the Oracle EBusiness Suite, I am expecting SOA to capture the payload and create an instance. The instances are not created.
This is the workaround I did to check if the events are firing or not.
1. Whenever a standard business event is fired, we can see a record in WF_DEFERRED queue. In this case too, I am able to see the record.
2. From WF_DEFERRED, the data should flow into WF_BPEL_Q. I am unable to see a record in this table in my case.
Which mean the events are firing but SOA is unable to capture the events. I tried to raise a JAVA event in the Oracle EBusiness Suite's workflow manager and SOA was able to capture the payload and an instance was created in weblogic EM. But when I update the task in the Oracle EBS, SOA is not able to capture the payload.
Any inputs to fix this issue is greatly appreciated. Please help.
Thanks,
Venkat Sai.Hi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Oracle Discussion Forums » SOA & Process Management » SOA Suite which you can get more quick response
Regard
Helios -
Business event group in an appraisal template catalog
HI all,
Is there any way to include the catalog of training in an appraisal template catalog? ie, a column where you can select a business event group (object L).
thanks, regardsHello Sergio,
I guess your post is in the wrong forum - this forum is about Supply Chain Event Management.
Regards
Berthold -
Event scriptions created on standard business events not firing
We have created a subscription and written custom code in the standard business event oracle.apps.eam.workorder.created . It should fire after a work order is created, but somehow our code is not getting executed. Tried with phase <100 and >=100
Is there anything else that we need to do?
Appreciate your help.
Its in R12.
Thanks
BalajiFor future reference, you have to set the Enable Workflow for Workorders flag in the EAM Parameters form in order to get the seeded business events to fire. If you only want to use the business events and not the workflow, then you could modify the workflow to bypass the approval.
Edited by: 986824 on Feb 7, 2013 9:26 AM -
APPS Adapter (ESB) error while reading standard business event
Hi,
I tested the sample services on TEST (myhost:7780) to consume the standard business event (oracle.apps.ar.hz.PartySite.create). Following exceptions are logged in j2ee log files (Section-1). The business event message is also rejected (see section-2).
Does anyone in this forum ever faced this issue OR any idea to address this issue more correctly.
If you want I can provide the sample service deatail in email.
J2ee Logs (Section-1)
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-09-28T19:15:08.676-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="WARNING"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>myhost</HOST_ID>
<HOST_NWADDR>212.112.194.34</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>80</THREAD_ID>
<USER_ID>oracle</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>212.112.194.34:69270:1191017705321:68</UNIQUE_ID><SEQ>7043</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Caught PCRetriableResourceException, reject/retry the message</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[ORABPEL-12600
Generic error.
java.lang.NullPointerException
at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.processMessage(ESBListenerImpl.java:368)
at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.onMessage(ESBListenerImpl.java:295)
at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:293)
at oracle.tip.adapter.apps.AppsMessageEndpointImpl.onMessage(AppsMessageEndpointImpl.java:89)
at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.doRaise(AQActivationSpecDequeuer.java:375)
at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.raiseInboundInteraction(AQActivationSpecDequeuer.java:314)
at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.raise(AQActivationSpecDequeuer.java:246)
at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.run(AQActivationSpecDequeuer.java:225)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819)
at java.lang.Thread.run(Thread.java:595)
Please create a Service Request with Oracle Support.
at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.processMessage(ESBListenerImpl.java:388)
at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.onMessage(ESBListenerImpl.java:295)
at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:293)
at oracle.tip.adapter.apps.AppsMessageEndpointImpl.onMessage(AppsMessageEndpointImpl.java:89)
at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.doRaise(AQActivationSpecDequeuer.java:375)
at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.raiseInboundInteraction(AQActivationSpecDequeuer.java:314)
at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.raise(AQActivationSpecDequeuer.java:246)
at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.run(AQActivationSpecDequeuer.java:225)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.processMessage(ESBListenerImpl.java:368)
... 12 more
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2007-09-28T19:15:08.677-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>myhost</HOST_ID>
<HOST_NWADDR>212.112.194.34</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>80</THREAD_ID>
<USER_ID>oracle</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>212.112.194.34:69270:1191017705321:68</UNIQUE_ID><SEQ>7043</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Exception in onMessage. Rejecting the message now</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[java.lang.NullPointerException
at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.recordException(ESBListenerImpl.java:324)
at oracle.tip.esb.server.service.impl.inadapter.ESBListenerImpl.onMessage(ESBListenerImpl.java:299)
at oracle.tip.adapter.fw.jca.messageinflow.MessageEndpointImpl.onMessage(MessageEndpointImpl.java:293)
at oracle.tip.adapter.apps.AppsMessageEndpointImpl.onMessage(AppsMessageEndpointImpl.java:89)
at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.doRaise(AQActivationSpecDequeuer.java:375)
at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.raiseInboundInteraction(AQActivationSpecDequeuer.java:314)
at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.raise(AQActivationSpecDequeuer.java:246)
at oracle.tip.adapter.aq.inbound.AQActivationSpecDequeuer.run(AQActivationSpecDequeuer.java:225)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819)
at java.lang.Thread.run(Thread.java:595)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
Reject Message Section-2
<WF_EVENT_T xmlns="http://xmlns.oracle.com/xdb/APPS">
<PRIORITY xmlns="">50</PRIORITY>
<SEND_DATE xmlns="">2007-09-28T19:13:22.000-04:00</SEND_DATE>
<RECEIVE_DATE xmlns="">2007-09-28T19:15:08.000-04:00</RECEIVE_DATE>
<CORRELATION_ID xmlns=""></CORRELATION_ID>
<PARAMETER_LIST xmlns="">
<PARAMETER_LIST_ITEM>
<NAME>USER_ID</NAME>
<VALUE>1395</VALUE>
</PARAMETER_LIST_ITEM>
<PARAMETER_LIST_ITEM>
<NAME>RESP_ID</NAME>
<VALUE>50360</VALUE>
</PARAMETER_LIST_ITEM>
<PARAMETER_LIST_ITEM>
<NAME>RESP_APPL_ID</NAME>
<VALUE>660</VALUE>
</PARAMETER_LIST_ITEM>
<PARAMETER_LIST_ITEM>
<NAME>SECURITY_GROUP_ID</NAME>
<VALUE>0</VALUE>
</PARAMETER_LIST_ITEM>
<PARAMETER_LIST_ITEM>
<NAME>ORG_ID</NAME>
<VALUE>103</VALUE>
</PARAMETER_LIST_ITEM>
<PARAMETER_LIST_ITEM>
<NAME>PARTY_SITE_ID</NAME>
<VALUE>217048</VALUE>
</PARAMETER_LIST_ITEM>
</PARAMETER_LIST>
<EVENT_NAME xmlns="">oracle.apps.ar.hz.PartySite.create</EVENT_NAME>
<EVENT_KEY xmlns="">oracle.apps.ar.hz.PartySite.create112538</EVENT_KEY>
<EVENT_DATA xmlns=""></EVENT_DATA>
<FROM_AGENT xmlns="">
<NAME>WF_BPEL_QAGENT</NAME>
<SYSTEM>ECSTST2.ARROW.COM</SYSTEM>
</FROM_AGENT>
<TO_AGENT xmlns=""/>
<ERROR_SUBSCRIPTION xmlns="">okUY5xyheOjgMCOCKYkzaQ==</ERROR_SUBSCRIPTION>
<ERROR_MESSAGE xmlns=""></ERROR_MESSAGE>
<ERROR_STACK xmlns=""></ERROR_STACK>
</WF_EVENT_T>
Thanks in Advance.
--KBHi
I've recently had issues with the Apps Adapter for event listening when i upgraded to 10.1.3.3
There have been problems with the way the namespace is derived. I applied patch 6267726 and now it works great!
When I create a new listener for an event, a new xsd is created, specific to the name of the adapter process in EBS and henceforth the payload has that specific namespace attached. For example:
http://xmlns.oracle.com/xdb/APPS/ListenForOrganizationCreate
Events then get raised that reflect that namespace. XSL transformations then need to reflect that namespace in your routing rules.
It may be that the XSLT mappings are expecting a different namespace than you are receiving..
Give the patch a try if you are on 10.1.3.3 and then try and rebuild a process from scratch to see if it works.
Chris
Maybe you are looking for
-
Addition of a custom column in a table view
Hi all, I want to add a custom column in a table view. Kindly tell me if this is possible. Regards, Vivek Pandey
-
I am preparing to buy an iMac or Mac Pro for home music production. I could stretch my budget to a Mac Pro, but with my sensible head on i should get an iMac. Someone told me an iMac would be sufficient but 'be sure to max out the RAM'. Its an extra
-
Am I having encoding trouble with this script?
G'day, I have a simple applescript, intended to get the title and url from current webpage in order to log to a text-based journaling app called Day One: set out_file to "/Users/home/.tmp_dayone" tell application "Safari" set current_
-
Abstract class implementation Dos Prompt
Hello everyone, Good day! Anyone knows how to implement or use abstract class to another class. Pls.... help me. I'm still a novice programmer. Program like Bank Account with a abstract class named 'Account' and an another class 'Savings' extends the
-
FB50: Functional Area error
Hello Gurus- We created a template using FB50 for our JE Revenue Expense with functional area. When we go to input something, changing amount, we get a Functional Area error F5394 is not permitted for account NNNNNN. The only way we can get it to p