Shortcut for modifying tracks in bin is gone in FCP 5 ?

Hello forum,
I'm looking for the handy shortcut to modify the logged audiotracks in the "tracks"-column inside a bin.
In FCP 4 I could just press "ctrl" in the tracks column and change them from 1V to 1V,2A for example.
In FCP 5 this doesn't work anymore. It says: No shortcuts.
So where is it gone ?
Greetings from Munich Oktoberfest.
Uwe

Thanks for pointing this out. I just noticed this also. It's a big problem if anyone out there makes the mistake I often make - like forgetting to check the audio in clip settings in Log & Capture. With the control-click (or right mouse click) modifying technique Uwe talked about, you can make up for a lot of logging mistakes by doing changing the tracks column for any number of clips before batch capturing. If the Shortcut is gone, what's one supposed to do - relog everything?
This problem needs to be fixed...and soon.

Similar Messages

Any ShortCut for selecting Tracks in FCP?

Hello,
I wonder if there is any ShortCut to select the Tracks in the Timeline?
I googled, and I asked friends nobody seem to know!
Thats the only moment I need to use my Mouse/Pen, while making a rough cut.
There is a ShortCut for everything else
like moving the Tracks up and down...but for selecting them?
I dont know!
PB 1.5 Mac OS X (10.4.9)

As mentioned, no keyboard shortcut to select whole tracks.
You can select clips in tracks with the keyboard, if that's what you want to do, but it's cumbersome. I'm all about using the keyboard when possible, but it's the one things that using the mouse is best for.
To select clips with the keyboard, you must really think ahead, about Ins and Outs, and AutoSelect. If, say, you wanted to select clips on Track 2 with only the keyoard, you might need to take these many steps
Mark In and Out
Or, if you need an entire track, press Command-A to select all, then X to Mark In and Out, then Shift-A to Mark Selection
Toggle Autoselect Off for all Video Tracks (Command-Numeric Zero, that's Zero on the number pad)
Toggle AutoSelect On for select video tracks (Command-Numeric Two - you guessed it, 2 on the number pad)
Toggle Autoselect Off for all Audio Tracks (Option-Numeric Zero)
Toggle AutoSelect On for select Audio tracks (Command-Numeric [track #] (for each track)
Select In and Out (Option-A)
In other words, learn to appreciate your mouse.

Shortcut for a track

Hi,
I can not resolve my problem. On our Public site we create a course page for my unit «BENA». This welcome page name is «Sciences et technologies».
My problem, we have a welcome page for «Sciences de l'éducation» and we would like to put a shortcut to a track we have in «BENA» course page (Sciences et technologies»). The information are in two different page. I do not want to copy the track. I just need to create a shorcut.
I know it is possible because for example Duke use it. But I do not know How to do it. I know how to create a link with itmss. But this do not solve my problem.
Thank you

I dont think there is one that does both actions.
There is one that will toggle tracks.though.
I have those set up for video on keys 1 - 9 and audio on keys shift1 - shift 9.
There is another available for "all" but I use Shift Click.

PPCC 2014.1 keyboard shortcut for source patching or track targeting???

Does anyone know if there's a keyboard shortcut for targeting tracks or else moving the "V1" and "A1" targets up and down the tracks in the timeline with the latest PPCC 2014.1 update???
I believe PPCC refers to it as "source patching". But looking through the vast keyboard shortcut list, I haven't found it.

Here's the shortcuts you want to be looking at... also Marks linked page has useful info on mouse operations.
The source assignment presets could prove useful too (although it would all get much easier if they would implement auto-patch...)

FIND BIN KEYBOARD SHORTCUT FOR SEQUENCES

Hi,
Is there a keyboard shortcut that allows you to find the bin in which your sequence lives? (There is one in Avid, is there not a comparable on for FCP?)
Thanks!

I´m afraid there is no keyboard shortcut for that.
Avid has it, FCP not...
But don´t say it too load, or this thread will be censored and erased, as it´s happened in the past when talking about comparisions between Avid and FCP.
Flavio.

DW 2014.1 keyboard shortcuts for "Code and Design" gone

Option has disappeared for setting keyboard shortcuts specifically for "Code and Design" (or plain Design either, for that matter)? Split Code option just gives you two code windows and all the other options in Shortcuts are for Live View, not Design view.

Alt-F11 does not help me in this situation because you still cannot toggle between showing Code and Design versus all Code, or all Design. Live options have replaced Design options, but even then, you cannot make a shortcut for Code and Live (though it's available in the View menu). This screen shot shows what has disappeared.
Again: Ctl + ` does not toggle the VIEW, it toggles the active PANE.

Logic pro 9,record ready has gone for audio tracks,can't record now.

I upgraded from Logic 8 to logic pro 9 back in october,everything was fine no probs.I have come back to record after a month away & now there is no record ready for audio tracks on any page,they're there for instruments & midi tracks.All else seems fine - just can't record! Also is there any way of getting help from apple,can't see anywhere to contact them without paying!! can anyone help with this?,tis the season of frustration....

You have to select an Input device in the Audio preferences. Since Logic 9 you can assign different devices for In- and Output. So make a selection there and everything will be fine.

Shortcut for closing multiple bins?

If you have a whole bunch of bins open in your browser, and want to close them all
at once, is there a shortcut to do that which doesn't result in FCP attempting to close
the project?
Any input would be appreciated.

Do you know how to make all the bins appear as TABS in ONE bin? This is what I do, and closing all of them at once is a snap.
I have this on my ORGANIZATION IN FCP DVD, but Walter here made a small tutorial on how to do this...
http://library.creativecow.net/articles/biscardi_walter/tabs.php
Shane

CS4-How to create a shortcut for media browser icon clean up function?

Hi again.
I recently upgraded my system, now running CS4 suite in Window 7 - 64bits. This to be able to manage AVCHD files within premiere.
I'm just starting to work with it and I'm missing the ability to create a shortcut for this function I had in PP2 cs2. I did go to the recommended reading before posing my question. There the most appropriate area I could find was about Bins Behaviours, at least I thought it was, and there was nothing in it.
I have gone to Edit / keyboard customization then each of the 3 choices, application, panels and tools. but could not see "Clean Up"
I hope someone has an answer for me as I like to use this panel as a story board and use this function often and thank those who will try to help me.
(I'm pleased that my avchd files are now coming nicely on the timeline!)_

Is this what you are looking for?

How do I generate a list of keyboard shortcuts for any given application

I want to generate a list of keyboard shortcuts for all of the applications I have on my Mac. I want the list to be a simple text (or rtf) file that I can edit and organize. (By edit, I don't mean change the shortcuts, only the report of them.)
I was using Key Cue, but it does not let me save the list to a text file.
I want this for several purposes. One is to have a easy to reference list of shortcuts to learn. Another is to find unused key combinations that I can use for my own keyboard shortcuts that I create with DefaultKeyBinding.dict.
Note: The program doesn't have to an OS X app. A program that runs from a shell without a GUI is plenty adequate.
If there is a way to read the keyboard commands from a plist list or other such file, and any of you know the format for these or where I can find them, I can write a Perl script myself to do it.

Well, the info is stored in...
/Users/YourUserName/Library/Preferences/com.apple.universalaccess.plist
PlistPro has a way to convert it to ASCII, but you'll srtill have work to do, as...
{enabled = 1; key = 20; modifier = 1179648; sybmolichotkey = 28; },
{enabled = 1; key = 20; modifier = 1441792; sybmolichotkey = 29; },
{enabled = 1; key = 21; modifier = 1179648; sybmolichotkey = 30; },
{enabled = 1; key = 21; modifier = 1441792; sybmolichotkey = 31; },
{enabled = 0; key = 28; modifier = 1572864; sybmolichotkey = 15; },
{enabled = 0; key = 27; modifier = 1572864; sybmolichotkey = 19; },
{enabled = 0; key = 24; modifier = 1572864; sybmolichotkey = 17; },
{enabled = 0; key = 47; modifier = 1835008; sybmolichotkey = 25; },
{enabled = 0; key = 43; modifier = 1835008; sybmolichotkey = 26; },
{enabled = 0; key = 28; modifier = 1835008; sybmolichotkey = 21; },
{enabled = 0; key = 96; modifier = 1048576; sybmolichotkey = 59; },
{enabled = 1; key = 122; modifier = 262144; sybmolichotkey = 12; },
{enabled = 0; key = 120; modifier = 262144; sybmolichotkey = 7; },
{enabled = 0; key = 99; modifier = 262144; sybmolichotkey = 8; },
{enabled = 0; key = 118; modifier = 262144; sybmolichotkey = 9; },
{enabled = 0; key = 96; modifier = 262144; sybmolichotkey = 10; },
{enabled = 0; key = 97; modifier = 262144; sybmolichotkey = 11; },
{enabled = 1; key = 50; modifier = 1048576; sybmolichotkey = 27; },
{enabled = 1; key = 98; modifier = 262144; sybmolichotkey = 13; },
{enabled = 1; key = 50; modifier = 1572864; sybmolichotkey = 51; },
{enabled = 1; key = 100; modifier = 262144; sybmolichotkey = 57; },
{enabled = 1; key = 17; modifier = 1572864; sybmolichotkey = 50; },
{enabled = 1; key = 2; modifier = 1572864; sybmolichotkey = 52; },
{enabled = 0; key = 105; modifier = 0; sybmolichotkey = 32; },
{enabled = 0; key = 109; modifier = 0; sybmolichotkey = 33; },
{enabled = 0; key = 103; modifier = 0; sybmolichotkey = 36; },
{enabled = 0; key = 109; modifier = 0; sybmolichotkey = 62; },
{enabled = 0; key = 49; modifier = 1048576; sybmolichotkey = 60; },
{enabled = 0; key = 49; modifier = 1572864; sybmolichotkey = 61; },
{enabled = 1; key = 2; modifier = 1310720; sybmolichotkey = 70; },
{enabled = 1; key = 49; modifier = 1048576; sybmolichotkey = 64; },
{enabled = 1; key = 49; modifier = 1572864; sybmolichotkey = 65; },
{enabled = 0; key = 53; modifier = 1048576; sybmolichotkey = 73; },
{enabled = 1; key = 107; modifier = 0; sybmolichotkey = 53; },
{enabled = 1; key = 113; modifier = 0; sybmolichotkey = 54; }

Apple Mail creating a new keyboard shortcut for delete

In Gmail I can hit the "D" key to delete saves much time.
In Apple Mail I have to hit the delete key which is on the right side of the keyboard and my right hand is busy with the track pad scrolling. I want to create a keyboard shortcut for delete something like option D any easy left handed shortcut will work. Sys pref/keyboard shortcuts/mail doesn't work, Any suggestions?

Hello!
I don't know about mouse shortcuts, but you can put a delete button in the top bar of Mail, like so:

Disable Keyboard Shortcut for Open Adobe Bridge

Is there a way to disable the keyboard shortcut which opens Adobe Bridge from Illustrator? Often when I'm working quickly I accidentally hit this (option command o) instead of (shift command o) to outline type. It halts everything to open Bridge, which I never use, and drives me crazy. Is there any way to disable this command?
Any help would be greatly approciated!!

Go to Edit > Keyboard Shortcuts > Menu Commands > File and remove or modify the default shortcut for Bridge.

Keyboard shortcut for "Save a Copy" in Acrobat 9 Pro?

I cannot find a keyboard shortcut for Save a Copy in Acrobat 9.3.2. THere's nothing in the help docs.
Even more bizarrely, the idiots who designed the GUI assigned the y shortcut on the File menu to both "Modify PDF Portfolio" *AND* "Save a Copy", so hitting Alt + f, y performs only the former not the latter.
Any ideas or am I SOL?
Thanks.

Hi Dan,
"Save a Copy" is Adobe Reader.
It is not associated with Acrobat Professional's "File" drop-down.
fwiw –
For Acrobat Pro 9; a link to a free downloadable 13 x 19 poster in PDF format (for Windows and Mac) is at:
http://help.adobe.com/en_US/Acrobat/9.0/Professional/WS58a04a822e3e50102bd615109794195ff-7 aee.w.html
Be well...

Keyboard Shortcut for bullets (Command-Shift-L) no longer works

Hey Guys,
It seems so odd and I find it so irritating that I have been using this keyboard shortcut which is Command-Shift-L for bullets in Outlook, Notes and almost any word processing applications. All of a sudden this seems to have gone and now replaced by a Google Search. I tried researching a lot on the internet and found many articles which confirmed that this was indeed a keyboard shortcut but I couldnt find even one which could tell me what happened to it and how to make it work again. I've got so used to this shortcut because my work involves mainly around drafting emails and documents.
I have Macbook Pro Retina 13inch 2013 model & running Mac OSX 10.9.4 OS.
Now I did find one website link which told me how to disable the Safari trigger for this shortcut and I was successful in removing that shortcut. But I am stuck at the point where it's just blank. So now when I press these keys, nothing happens because no shortcut is set to it. I am moving in circles and would really appreciate if anyone can help.
P.S I've already gone through many links which say create paragraphs, this and blah blah but sorry I am not interested in that....Some links also say that Option + 8 key works for the bullets but that doesnt work for me either. However, I dont want that too. I would want the original shortcut which was there and would really appreciate if someone can tell me how to get it back or even configure it back to the way it was. Sorry for being rude but I am just frustrated with the long hours I have spent in fixing this silly issue and don't want the similar answers which I have already come across on the other links. Your help is much appreciated. Thank you in advance!

Thanks for your reply. I can't seem to find the bullets option in Shortcuts. Could you give me more details on how to make that happen.
There is no bullets option in Shortcuts. Defining shortcuts works by binding menu items in an application to a key combination. You have to find the name of a menu item in the application you are using.
For example in "Notes" is a menu "Format > Lists > Insert Bulleted List"
To bind it to the shortcut "⇧⌘L" open the Keyboard System Preferences > Shorttcuts tab and press "+" to add an application shortcut.
Type the name of the menu item "Insert Bulleted List" and enter the key combination.
This will work in "Notes", but you have to identify the names of menu items that will produce bullets in your other applications, if you want to add the shortcut for them.

CS6 will not save keyboard shortcut for dust & scratches filter

I am running Photoshop CS6 with all updates on a Windows 8 system. I have several keyboard shortcuts set up that all work fine but when I assign a keyboard shortcut for the dust & scratches filter it will work until I close Photoshop - when I then open Photoshop again this shortcut is gone but all my other shortcuts remain.
I have tried going back to the default keyboard shortcuts and then adding just the shortcut for dust & scratches (I have tried ctrl-F8 and several others) and then closing Photoshop and opening it again with the same results. I was able to add back all of my other shortcuts and they work fine.
For some reason I can assign a keyboard shortcut to anything except the dust & scratches filter.
Can anyone shed some light on this problem?
Thanks

I had a chance to try the script on a windows 8 machine running photoshop cs6 13.01 in both photoshop cs6 versions 32 and 64 bit and shortcuts seem to stay between restarts.
If in photoshop cs6 you go to File>Scripts you can see that the script is actually listed?
When i saved the script out of ExtendScript Toolkit i named it Dust and Scatches.jsx.
Did you run ExtendScript Toolkit as an administrator before saving the script?
(right click on the ExtendScript Toolkit shortcut (tile) and choose Run as Administrator)
Saved to:
C:\Program Files (x86)\Adobe\Adobe Photoshop CS6\Presets\Scripts
(cs6 32 bit)
and
C:\Program Files\Adobe\Adobe Photoshop CS6\Presets\Scripts
(cs6 64 bit)
Another possibilty if you can't get the script to work is using an action (Filter>Dust and Scratches) and assigning a function key for the shortcut.

Shortcut for modifying tracks in bin is gone in FCP 5 ?

Similar Messages

Maybe you are looking for