Should enhancements (code plug-ins) be activated in target after transport?

Hi all,
I have recently implemented some enhancements via the code plug-ins as can be referenced via transaction se19. They all worked well in the development system but in QA I had to re-open each one in display mode in order to re-activate them. Is this a requirement for all such enhancements (i.e. should we always activate them in each target environment after sending their transports into a target environment)?
Thank you.

Hi,
If the enhancement implemenation was transported in a active state, I dont think you need to reactivated them in each new system.
But if it was transported in a inactive state you have to activate in each new system.
Thanks,
Poonam.

Similar Messages

Authentication Plug-ins for active directory Multiple Domains(oidspad2.sh)

hi ,
i have use note 294791.1 from metalink to try link to active directory i have 2 one is staff and another is student
i first ran oidspadi.sh to create plugin for staff it works then i edit the 2 script to oidspad2.pls and oidspad2.sh with the require changes inside the files then i ran it it work but now the problem is the first ad now cant work this is my changes below
FOR oidspad2.pls
Rem
Rem $Header: oidspada.pls 02-aug-2004.04:45:11 saroy Exp $
Rem
Rem oidspads.pls
Rem
Rem Copyright (c) 2002, 2004, Oracle. All rights reserved.
Rem
Rem NAME
Rem oidspada.pls - 9.0.4 OID Password Active Directory
Rem External Authentication Plug-in
Rem
Rem
Rem NOTES
Rem <other useful comments, qualifications, etc.>
Rem
Rem MODIFIED (MM/DD/YY)
Rem saroy 08/02/04 - Fix for bug 3807482
Rem qdinh 01/27/04 - bug 3374115
Rem dlin 01/08/04 - pingan perf
Rem dlin 08/22/03 - 3111770 bug fix
Rem dlin 08/27/03 - change the way to get name
Rem dlin 08/13/03 - bug 2962082 fix
Rem dlin 02/21/03 - plug-in install changes
Rem dlin 02/13/03 - dlin_bug-2625027
Rem dlin 02/05/03 - fix ssl & failover
Rem dlin 01/31/03 - dlin_adextauth1
Rem dlin 01/30/03 - Created
Rem
SET echo off;
SET serveroutput off;
SET feedback off;
SET verify off;
CREATE OR REPLACE PACKAGE OIDADPSW2 AS
PROCEDURE when_bind_replace (ldapplugincontext IN ODS.plugincontext,
result OUT INTEGER,
dn IN VARCHAR2,
passwd IN VARCHAR2,
rc OUT INTEGER,
errormsg OUT VARCHAR2
PROCEDURE when_compare_replace (ldapplugincontext IN ODS.plugincontext,
result OUT INTEGER,
dn IN VARCHAR2,
attrname IN VARCHAR2,
attrval IN VARCHAR2,
rc OUT INTEGER,
errormsg OUT VARCHAR2
AD_HANDLE DBMS_LDAP.session DEFAULT NULL;
END OIDADPSW2;
SHOW ERROR
CREATE OR REPLACE PACKAGE BODY OIDADPSW2 AS
SUBTYPE LDAP_SESSION IS RAW(32);
SUBTYPE LDAP_MESSAGE IS RAW(32);
SUBTYPE LDAP_BER_ELEMENT IS RAW(32);
SUBTYPE ATTRLIST IS DBMS_LDAP.STRING_COLLECTION;
SUBTYPE MOD_ARRAY IS RAW(32);
SUBTYPE BERLIST IS DBMS_LDAP.BERVAL_COLLECTION;
PROCEDURE when_bind_replace (ldapplugincontext IN ODS.plugincontext,
result OUT INTEGER,
dn IN VARCHAR2,
passwd IN VARCHAR2,
rc OUT INTEGER,
errormsg OUT VARCHAR2
IS
retval pls_integer;
lresult BOOLEAN;
my_session DBMS_LDAP.session;
my_session1 DBMS_LDAP.session;
tmp_session DBMS_LDAP.session;
adupname VARCHAR2(1024) DEFAULT NULL;
BEGIN
plg_debug( '=== Begin when_bind_replace()');
DBMS_LDAP.USE_EXCEPTION := FALSE;
result := 49;
adupname := LDAP_PLUGIN.get_adupname(ldapplugincontext);
IF (adupname IS NULL) THEN
result := 1;
plg_debug('Can not get ADUserPrincipalName');
rc := DBMS_LDAP.SUCCESS;
errormsg := 'Exception in when_bind_replace: Can not get ADUserPrincipalName';
plg_debug( '=== End when_bind_replace() ===');
RETURN;
END IF;
plg_debug( 'Go to AD for authentication');
-- externally authenticate user
IF ('&1' = 'n') THEN
     IF (OIDADPSW2.AD_HANDLE IS NULL) THEN
     my_session := DBMS_LDAP.init('&2', &3);
     OIDADPSW2.AD_HANDLE := my_session;
     ELSE
     my_session := OIDADPSW2.AD_HANDLE;
     END IF;
plg_debug( 'ldap_session: ' || RAWTOHEX(SUBSTR(my_session,1,8)));
retval := DBMS_LDAP.simple_bind_s(my_session, adupname, passwd);
plg_debug( 'simple_bind_res: ' || TO_CHAR(retval));
-- Retry logic should be invoked only
-- when retval = LDAP_UNWILLING_TO_PERFORM || LDAP_UNAVAILABLE
-- Should free the old session if retry logic kept failing
-- to cause the number of outstanding sessions exceeding the
-- limit session number
     IF (retval = 52 OR retval = 53 OR retval = 81) THEN
     retval := DBMS_LDAP.unbind_s(my_session);
     plg_debug( 'unbind_res returns ' || TO_CHAR(retval));
     my_session1 := DBMS_LDAP.init('&4', &5);
     plg_debug( 'ldap_session: ' || RAWTOHEX(SUBSTR(my_session1,1,8)));
     tmp_session := my_session1;
     retval := DBMS_LDAP.simple_bind_s(my_session1, adupname, passwd);
     plg_debug( 'simple_bind_res again: ' || TO_CHAR(retval));
     IF (retval != 52 AND retval != 53 AND retval != 81) THEN
     OIDADPSW2.AD_HANDLE := tmp_session;
     ELSE
     retval := DBMS_LDAP.unbind_s(tmp_session);
     plg_debug( 'unbind_res result ' || TO_CHAR(retval));
     END IF;
     END IF;
ELSE
-- SSL bind
     IF (OIDADPSW2.AD_HANDLE IS NULL) THEN
     my_session := DBMS_LDAP.init('&6', &7);
     plg_debug( 'ldap_session initialized: ' || RAWTOHEX(SUBSTR(my_session,1,8)));
     retval := DBMS_LDAP.open_ssl(my_session,
                         'file:' || '&8', '&9', 2);
     IF (retval != 0) THEN
     plg_debug( 'open_ssl failed error: ' || TO_CHAR(retval));
     retval := DBMS_LDAP.unbind_s(my_session);
     plg_debug( 'unbind_res returns ' || TO_CHAR(retval));
     result := 82;
     RETURN;
     END IF;
     plg_debug( 'open_ssl: ' || TO_CHAR(retval));
     OIDADPSW2.AD_HANDLE := my_session;
     ELSE
     my_session := OIDADPSW2.AD_HANDLE;
     END IF;
retval := DBMS_LDAP.simple_bind_s(my_session, adupname, passwd);
plg_debug( 'simple_bind_res: ' || TO_CHAR(retval));
-- Retry logic should be invoked only
-- when retval = LDAP_UNWILLING_TO_PERFORM
-- or LDAP_UNAVAILABLE
     IF (retval = 52 OR retval = 53 OR retval = 81) THEN
     retval := DBMS_LDAP.unbind_s(my_session);
     plg_debug( 'unbind_res returns ' || TO_CHAR(retval));
     my_session1 := DBMS_LDAP.init('&10', &11);
     plg_debug( 'ldap_session: ' || RAWTOHEX(SUBSTR(my_session1,1,8)));
     tmp_session := my_session1;
     retval := DBMS_LDAP.open_ssl(my_session1,
                         'file:' || '&12', '&13', 2);
     IF (retval != 0) THEN
     plg_debug( 'retry open_ssl failed error: ' || TO_CHAR(retval));
     retval := DBMS_LDAP.unbind_s(my_session1);
     plg_debug( 'retry unbind_res returns ' || TO_CHAR(retval));
     result := 82;
     RETURN;
     END IF;
     plg_debug( 'retry open_ssl: ' || TO_CHAR(retval));
     retval := DBMS_LDAP.simple_bind_s(my_session1, adupname, passwd);
     plg_debug( 'simple_bind_res: again ' || TO_CHAR(retval));
     IF (retval != 52 AND retval != 53 AND retval != 81) THEN
     OIDADPSW2.AD_HANDLE := tmp_session;
     ELSE
     retval := DBMS_LDAP.unbind_s(tmp_session);
     plg_debug( 'unbind_res Returns ' || TO_CHAR(retval));
     END IF;
     END IF;
END IF;
-- for failover to connect to the secondary server
IF ('&14' = 'y' AND retval != 0) THEN
IF ('&15' = 'n') THEN
     IF (OIDADPSW2.AD_HANDLE IS NULL) THEN
     my_session := DBMS_LDAP.init('&16', &17);
     OIDADPSW2.AD_HANDLE := my_session;
     ELSE
     my_session := OIDADPSW2.AD_HANDLE;
     END IF;
plg_debug( 'ldap_session initialized: ' || RAWTOHEX(SUBSTR(my_session,1,8)));
retval := DBMS_LDAP.simple_bind_s(my_session, adupname, passwd);
plg_debug( 'simple_bind_res: ' || TO_CHAR(retval));
     IF (retval = 52 OR retval = 53 OR retval = 81) THEN
     retval := DBMS_LDAP.unbind_s(my_session);
     plg_debug( 'unbind_res returns ' || TO_CHAR(retval));
     my_session1 := DBMS_LDAP.init('&18', &19);
     plg_debug( 'retry ldap_session: ' || RAWTOHEX(SUBSTR(my_session1,1,8)));
     tmp_session := my_session1;
     retval := DBMS_LDAP.simple_bind_s(my_session1, adupname, passwd);
     plg_debug( 'retry simple_bind_res again: ' || TO_CHAR(retval));
     IF (retval != 52 AND retval != 53 AND retval != 81) THEN
          OIDADPSW2.AD_HANDLE := tmp_session;
     ELSE
     retval := DBMS_LDAP.unbind_s(tmp_session);
          plg_debug( 'unbind_res Returns ' || TO_CHAR(retval));
     END IF;
     END IF;
ELSE
     IF (OIDADPSW2.AD_HANDLE IS NULL) THEN
     my_session := DBMS_LDAP.init('&20', &21);
     plg_debug( 'ldap_session: ' || RAWTOHEX(SUBSTR(my_session,1,8)));
     retval := DBMS_LDAP.open_ssl(my_session,
                         'file:' || '&22', '&23', 2);
     IF (retval != 0) THEN
     plg_debug( 'open_ssl failed error: ' || TO_CHAR(retval));
     retval := DBMS_LDAP.unbind_s(my_session);
     plg_debug( 'unbind_res returns ' || TO_CHAR(retval));
     result := 82;
     RETURN;
     END IF;
     plg_debug( 'open_ssl: ' || TO_CHAR(retval));
     OIDADPSW2.AD_HANDLE := my_session;
     ELSE
     my_session := OIDADPSW2.AD_HANDLE;
     END IF;
retval := DBMS_LDAP.simple_bind_s(my_session, adupname, passwd);
plg_debug( 'simple_bind_res: ' || TO_CHAR(retval));
-- Retry logic should be invoked only
-- when retval = LDAP_UNWILLING_TO_PERFORM || LDAP_UNAVAILABLE
     IF (retval = 52 OR retval = 53 OR retval = 81) THEN
     retval := DBMS_LDAP.unbind_s(my_session);
     plg_debug( 'unbind_res returns ' || TO_CHAR(retval));
     my_session1 := DBMS_LDAP.init('&24', &25);
     plg_debug( 'retry ldap_session: ' || RAWTOHEX(SUBSTR(my_session1,1,8)));
     tmp_session := my_session1;
     retval := DBMS_LDAP.open_ssl(my_session1,
                         'file:' || '&26', '&27', 2);
     IF (retval != 0) THEN
     plg_debug( 'retry open_ssl failed error: ' || TO_CHAR(retval));
     retval := DBMS_LDAP.unbind_s(my_session);
     plg_debug( 'retry unbind_res returns ' || TO_CHAR(retval));
     result := 82;
     RETURN;
     END IF;
     plg_debug( 'retry open_ssl: ' || TO_CHAR(retval));
     retval := DBMS_LDAP.simple_bind_s(my_session1, adupname, passwd);
     plg_debug( 'simple_bind_res: again ' || TO_CHAR(retval));
     IF (retval != 52 AND retval != 53 AND retval != 81) THEN
          OIDADPSW2.AD_HANDLE := tmp_session;
     ELSE
     retval := DBMS_LDAP.unbind_s(tmp_session);
     plg_debug( 'unbind_res result ' || TO_CHAR(retval));
     END IF;
     END IF;
     END IF;
END IF;
IF (retval = 0) THEN
result := 0;
plg_debug('AD auth return TRUE');
ELSE
     result := retval;
plg_debug('AD auth return FALSE or ERROR');
END IF;
-- retval := DBMS_LDAP.unbind_s(my_session);
-- plg_debug( 'unbind_res Returns ' || TO_CHAR(retval));
rc := DBMS_LDAP.SUCCESS;
errormsg := 'No error msg.';
plg_debug( '=== End when_bind_replace() ===');
EXCEPTION
WHEN OTHERS THEN
rc := DBMS_LDAP.OPERATIONS_ERROR;
     retval := DBMS_LDAP.unbind_s(OIDADPSW2.AD_HANDLE);
     OIDADPSW2.AD_HANDLE := NULL;
     plg_debug( ' exception unbind_res returns ' || TO_CHAR(retval));
errormsg := 'Exception: when_bind_replace plugin';
plg_debug( 'Exception in when_bind_replace(). Error code is ' ||
          TO_CHAR(sqlcode));
plg_debug( ' ' || Sqlerrm);
END;
PROCEDURE when_compare_replace (ldapplugincontext IN ODS.plugincontext,
result OUT INTEGER,
dn IN VARCHAR2,
attrname IN VARCHAR2,
attrval IN VARCHAR2,
rc OUT INTEGER,
errormsg OUT VARCHAR2
IS
retval pls_integer;
lresult BOOLEAN;
my_session DBMS_LDAP.session;
my_session1 DBMS_LDAP.session;
tmp_session DBMS_LDAP.session;
adupname VARCHAR2(1024) DEFAULT NULL;
BEGIN
plg_debug( '=== Begin when_compare_replace()');
result := DBMS_LDAP.COMPARE_FALSE;
DBMS_LDAP.USE_EXCEPTION := FALSE;
adupname := LDAP_PLUGIN.get_adupname(ldapplugincontext);
IF (adupname IS NULL) THEN
result := DBMS_LDAP.COMPARE_FALSE;
plg_debug('Can not get ADuserPrincipalName');
rc := DBMS_LDAP.SUCCESS;
errormsg := 'Exception in when_compare_replace: Can not get ADUserPrincipalName';
plg_debug( '=== End when_compare_replace() ===');
RETURN;
END IF;
-- externally authenticate user
IF ('&28' = 'n') THEN
     IF (OIDADPSW2.AD_HANDLE IS NULL) THEN
     my_session := DBMS_LDAP.init('&29', &30);
     OIDADPSW2.AD_HANDLE := my_session;
     ELSE
     my_session := OIDADPSW2.AD_HANDLE;
     END IF;
plg_debug( 'ldap_session: ' || RAWTOHEX(SUBSTR(my_session,1,8)));
retval := DBMS_LDAP.simple_bind_s(my_session, adupname, attrval);
plg_debug( 'simple_bind_res: ' || TO_CHAR(retval));
-- Retry logic should be invoked only
-- when retval = LDAP_UNWILLING_TO_PERFORM || LDAP_UNAVAILABLE
IF (retval = 52 OR retval = 53 OR retval = 81) THEN
     retval := DBMS_LDAP.unbind_s(my_session);
plg_debug( 'retry unbind_res returns ' || TO_CHAR(retval));
     my_session1 := DBMS_LDAP.init('&31', &32);
     plg_debug( 'ldap_session: ' || RAWTOHEX(SUBSTR(my_session1,1,8)));
     tmp_session := my_session1;
     retval := DBMS_LDAP.simple_bind_s(my_session1, adupname, attrval);
     plg_debug( 'simple_bind_res again: ' || TO_CHAR(retval));
     IF (retval != 52 AND retval != 53 AND retval != 81) THEN
     OIDADPSW2.AD_HANDLE := tmp_session;
ELSE
     retval := DBMS_LDAP.unbind_s(tmp_session);
     plg_debug( 'unbind_res result ' || TO_CHAR(retval));
     END IF;
     END IF;
ELSE
     IF (OIDADPSW2.AD_HANDLE IS NULL) THEN
     my_session := DBMS_LDAP.init('&33', &34);
     plg_debug( 'ldap_session: ' || RAWTOHEX(SUBSTR(my_session,1,8)));
     retval := DBMS_LDAP.open_ssl(my_session,
                         'file:' || '&35', '&36', 2);
     IF (retval != 0) THEN
     plg_debug( 'open_ssl failed error: ' || TO_CHAR(retval));
     retval := DBMS_LDAP.unbind_s(my_session);
     plg_debug( 'unbind_res returns ' || TO_CHAR(retval));
     result := 82;
     RETURN;
     END IF;
     plg_debug( 'open_ssl: ' || TO_CHAR(retval));
     OIDADPSW2.AD_HANDLE := my_session;
     ELSE
     my_session := OIDADPSW2.AD_HANDLE;
     END IF;
retval := DBMS_LDAP.simple_bind_s(my_session, adupname, attrval);
plg_debug( 'simple_bind_res: ' || TO_CHAR(retval));
-- Retry logic should be invoked only
-- when retval = LDAP_UNWILLING_TO_PERFORM || LDAP_UNAVAILABLE
IF (retval = 52 OR retval = 53 OR retval = 81) THEN
     retval := DBMS_LDAP.unbind_s(my_session);
plg_debug( 'retry unbind_res returns ' || TO_CHAR(retval));
     my_session1 := DBMS_LDAP.init('&37', &38);
     plg_debug( 'ldap_session: ' || RAWTOHEX(SUBSTR(my_session1,1,8)));
     tmp_session := my_session1;
     retval := DBMS_LDAP.open_ssl(my_session1,
                         'file:' || '&39', '&40', 2);
IF (retval != 0) THEN
     plg_debug( 'open_ssl failed error: ' || TO_CHAR(retval));
     retval := DBMS_LDAP.unbind_s(my_session);
     plg_debug( 'unbind_res returns ' || TO_CHAR(retval));
     result := 82;
     RETURN;
     END IF;
     plg_debug( 'open_ssl: ' || TO_CHAR(retval));
     retval := DBMS_LDAP.simple_bind_s(my_session1, adupname, attrval);
     plg_debug( 'simple_bind_res: again ' || TO_CHAR(retval));
     IF (retval != 52 AND retval != 53 AND retval != 81) THEN
     OIDADPSW2.AD_HANDLE := tmp_session;
ELSE
     retval := DBMS_LDAP.unbind_s(tmp_session);
     plg_debug( 'unbind_res result ' || TO_CHAR(retval));
     END IF;
     END IF;
END IF;
-- for failover to connect to the secondary AD
IF ('&41' = 'y' AND retval != 0) THEN
IF ('&42' = 'n') THEN
     IF (OIDADPSW2.AD_HANDLE IS NULL) THEN
     my_session := DBMS_LDAP.init('&43', &44);
     OIDADPSW2.AD_HANDLE := my_session;
     ELSE
     my_session := OIDADPSW2.AD_HANDLE;
     END IF;
plg_debug( 'ldap_session: ' || RAWTOHEX(SUBSTR(my_session,1,8)));
retval := DBMS_LDAP.simple_bind_s(my_session, adupname, attrval);
plg_debug( 'simple_bind_res: ' || TO_CHAR(retval));
-- Retry logic should be invoked only
-- when retval = LDAP_UNWILLING_TO_PERFORM || LDAP_UNAVAILABLE
     IF (retval = 52 OR retval = 53 OR retval = 81) THEN
     retval := DBMS_LDAP.unbind_s(my_session);
plg_debug( 'retry unbind_res returns ' || TO_CHAR(retval));
     my_session1 := DBMS_LDAP.init('&45', &46);
     plg_debug( 'ldap_session: ' || RAWTOHEX(SUBSTR(my_session1,1,8)));
     tmp_session := my_session1;
     retval := DBMS_LDAP.simple_bind_s(my_session1, adupname, attrval);
     plg_debug( 'simple_bind_res again: ' || TO_CHAR(retval));
     IF (retval != 52 AND retval != 53 AND retval != 81) THEN
          OIDADPSW2.AD_HANDLE := tmp_session;
ELSE
     retval := DBMS_LDAP.unbind_s(tmp_session);
     plg_debug( 'unbind_res result ' || TO_CHAR(retval));
     END IF;
     END IF;
     ELSE
     IF (OIDADPSW2.AD_HANDLE IS NULL) THEN
     my_session := DBMS_LDAP.init('&47', &48);
     plg_debug( 'ldap_session: ' || RAWTOHEX(SUBSTR(my_session,1,8)));
     retval := DBMS_LDAP.open_ssl(my_session,
                         'file:' || '&49', '&50', 2);
     IF (retval != 0) THEN
     plg_debug( 'open_ssl failed error: ' || TO_CHAR(retval));
     retval := DBMS_LDAP.unbind_s(my_session);
     plg_debug( 'unbind_res returns ' || TO_CHAR(retval));
     result := 82;
     RETURN;
     END IF;
     plg_debug( 'open_ssl: ' || TO_CHAR(retval));
     OIDADPSW2.AD_HANDLE := my_session;
     ELSE
     my_session := OIDADPSW2.AD_HANDLE;
     END IF;
retval := DBMS_LDAP.simple_bind_s(my_session, adupname, attrval);
plg_debug( 'simple_bind_res: ' || TO_CHAR(retval));
-- Retry logic should be invoked only
-- when retval = LDAP_UNWILLING_TO_PERFORM || LDAP_UNAVAILABLE
     IF (retval = 52 OR retval = 53 OR retval = 81) THEN
     retval := DBMS_LDAP.unbind_s(my_session);
plg_debug( 'retry unbind_res returns ' || TO_CHAR(retval));
     my_session1 := DBMS_LDAP.init('&51', &52);
     plg_debug( 'ldap_session: ' || RAWTOHEX(SUBSTR(my_session1,1,8)));
     tmp_session := my_session1;
     retval := DBMS_LDAP.open_ssl(my_session1,
                         'file:' || '&53', '&54', 2);
     IF (retval != 0) THEN
     plg_debug( 'open_ssl failed error: ' || TO_CHAR(retval));
     retval := DBMS_LDAP.unbind_s(my_session1);
     plg_debug( 'unbind_res returns ' || TO_CHAR(retval));
     result := 82;
     RETURN;
     END IF;
     plg_debug( 'open_ssl: ' || TO_CHAR(retval));
     retval := DBMS_LDAP.simple_bind_s(my_session1, adupname, attrval);
     plg_debug( 'simple_bind_res: again ' || TO_CHAR(retval));
     IF (retval != 52 AND retval != 53 AND retval != 81) THEN
          OIDADPSW2.AD_HANDLE := tmp_session;
     ELSE
     retval := DBMS_LDAP.unbind_s(tmp_session);
     plg_debug( 'unbind_res result ' || TO_CHAR(retval));
     END IF;
     END IF;
     END IF;
END IF;
IF (retval = 0) THEN
result := DBMS_LDAP.COMPARE_TRUE;
plg_debug('AD auth return TRUE');
ELSE
result := DBMS_LDAP.COMPARE_FALSE;
plg_debug('AD auth return FALSE or ERROR');
END IF;
-- retval := DBMS_LDAP.unbind_s(my_session);
-- plg_debug( 'unbind_res Returns ' || TO_CHAR(retval));
rc := DBMS_LDAP.SUCCESS;
errormsg := 'No error msg.';
plg_debug( '=== End when_compare_replace() ===');
EXCEPTION
WHEN OTHERS THEN
rc := DBMS_LDAP.OPERATIONS_ERROR;
errormsg := 'Exception: when_compare_replace plugin';
plg_debug( 'Exception in when_compare_replace(). Error code is ' ||
          TO_CHAR(sqlcode));
plg_debug( ' ' || Sqlerrm);
     retval := DBMS_LDAP.unbind_s(OIDADPSW2.AD_HANDLE);
     OIDADPSW2.AD_HANDLE := NULL;
END;
END OIDADPSW2;
SHOW ERRORS
EXIT;
-- usessl, adhost, adport, adhost, adsslport, walletloc, walletpwd
-- isfailover, isfailoverssl, sechost, secport, sechost, secsslport
-- secwalletloc, secwalletpwd
-- usessl, adhost, adport, adhost, adsslport, walletloc, walletpwd
-- isfailover, isfailoverssl, sechost, secport, sechost, secsslport
-- secwalletloc, secwalletpwd
FOR oidspadi.sh
#!/bin/sh
# $Header: oidspadi.sh 13-may-2005.13:48:51 saroy Exp $
# oidspadi.sh
# Copyright (c) 2002, 2005, Oracle. All rights reserved.
# NAME
# oidspadi.sh - AD external authentication plug-in install
# DESCRIPTION
# <short description of component this file declares/defines>
# NOTES
# <other useful comments, qualifications, etc.>
# MODIFIED (MM/DD/YY)
# saroy 05/13/05 - Fix for bug 4233817
# saroy 02/18/05 - Fix for bug 4054414
# saroy 11/02/04 - Fix for bug 3980370
# qdinh 01/19/04 - bug 3374115
# dlin 07/10/03 - turn off debug
# dlin 02/21/03 - plug-in install changes
# dlin 02/13/03 - dlin_bug-2625027
# dlin 07/22/02 - Creation
ADHOST="A"
ADPORT="1"
ADSSLPORT="1"
WALLETLOC="A"
WALLETPWD="A"
WALLETPWD2="A"
CONNECT="A"
ODSPWD="A"
ODSPWD2="A"
OIDHOST="A"
OIDPORT="1"
ORCLADMINPWD="A"
ORCLADMINPWD2="A"
PRGDN="A"
SCUSB="A"
EP="A"
ISSSL="n"
ISFAILOVER="n"
ISFAILOVERSSL="n"
SECADHOST="A"
SECADPORT="1"
SECADSSLPORT="1"
SECWALLETLOC="A"
SECWALLETPWD="A"
SECWALLETPWD2="A"
clear
echo "---------------------------------------------"
echo " OID Active Directory Plug-in Configuration"
echo "---------------------------------------------"
echo " "
echo "Please make sure Database and OID are up and running."
echo " "
LDAP_DIR=${ORACLE_HOME}/ldap
LDAP_LOG=${LDAP_DIR}/log
## ORACLE_HOME
if [ -z $ORACLE_HOME ] ; then
echo " ORACLE_HOME must be set for this installation script"
exit 0
fi
# gather required information
if [ ${ADHOST} = "A" ] ; then
printf "Please enter Active Directory host name: "
read ADHOST
fi
## active directory host name is required
if [ "${ADHOST}" = "" ]
then
echo "Active Directory host name is required";
exit 1;
fi
printf "Do you want to use SSL to connect to Active Directory? (y/n) "
read ISSSL
if [ "${ISSSL}" = "n" ]
then
if [ ${ADPORT} = "1" ] ; then
printf "Please enter Active Directory port number [389]: "
read ADPORT
if [ "${ADPORT}" = "" ]
then
ADPORT="389"
fi
fi
fi
if [ "${ISSSL}" = "y" ]
then
if [ ${ADSSLPORT} = "1" ] ; then
printf "Please enter Active Directory SSL port number [636]: "
read ADSSLPORT
if [ "${ADSSLPORT}" = "" ]
then
ADSSLPORT="636"
fi
fi
if [ ${WALLETLOC} = "A" ] ; then
echo " "
printf "Please enter Oracle wallet location: "
read WALLETLOC
fi
## wallet location is required
if [ "${WALLETLOC}" = "" ]
then
echo "Oracle wallet location is required";
exit 1;
fi
if [ ${WALLETPWD} = "A" ] ; then
printf "Please enter Oracle wallet password: "
stty -echo ; read WALLETPWD ; stty echo ; echo
fi
if [ "${WALLETPWD}" = "" ]
then
echo "Oracle wallet password is required";
exit 1;
fi
if [ ${WALLETPWD2} = "A" ] ; then
printf "Please enter confirmed Oracle wallet password: "
stty -echo ; read WALLETPWD2 ; stty echo ; echo
fi
if [ "${WALLETPWD}" != "${WALLETPWD2}" ]
then
echo "The input passwords are not matched";
exit 1;
fi
fi
if [ ${CONNECT} = "A" ] ; then
echo " "
printf "Please enter DB connect string: "
read CONNECT
fi
if [ ${ODSPWD} = "A" ] ; then
printf "Please enter ODS password: "
stty -echo ; read ODSPWD ; stty echo ; echo
fi
## password is required
if [ "${ODSPWD}" = "" ]
then
echo "ODS password is required";
exit 1;
fi
if [ ${ODSPWD2} = "A" ] ; then
printf "Please enter confirmed ODS password: "
stty -echo ; read ODSPWD2 ; stty echo ; echo
fi
if [ "${ODSPWD}" != "${ODSPWD2}" ]
then
echo "The input passwords are not matched";
exit 1;
fi
if [ "${CONNECT}" = "" ]
then
CMDNAME="$ORACLE_HOME/bin/sqlplus -s ods/${ODSPWD} "
else
CMDNAME="$ORACLE_HOME/bin/sqlplus -s ods/${ODSPWD}@${CONNECT} "
fi
# Check if ODS password and connect string is correct
${ORACLE_HOME}/bin/sqlplus -L ods/${ODSPWD}@${CONNECT} << END 1>/dev/null 2>/dev/null
exit;
END
if [ $? -ne 0 ]; then
echo "Incorrect connect string or ODS password specified"
exit 1;
fi
if [ ${OIDHOST} = "A" ] ; then
echo " "
printf "Please enter OID host name: "
read OIDHOST
fi
## oid host is required
if [ "${OIDHOST}" = "" ]
then
echo "OID host name is required";
exit 1;
fi
if [ ${OIDPORT} = "1" ] ; then
printf "Please enter OID port number [389]: "
read OIDPORT
if [ "${OIDPORT}" = "" ]
then
OIDPORT="389"
fi
fi
# Check if OID host and port is correct
${ORACLE_HOME}/bin/ldapbind -h ${OIDHOST} -p ${OIDPORT} 1>/dev/null 2>/dev/null
if [ $? -ne 0 ]; then
echo "Incorrect OID host or port specified"
exit 1;
fi
if [ ${ORCLADMINPWD} = "A" ] ; then
printf "Please enter orcladmin password: "
stty -echo ; read ORCLADMINPWD ; stty echo ; echo
fi
if [ "${ORCLADMINPWD}" = "" ]
then
echo "orcladmin password is required";
exit 1;
fi
if [ ${ORCLADMINPWD2} = "A" ] ; then
printf "Please enter confirmed orcladmin password: "
stty -echo ; read ORCLADMINPWD2 ; stty echo ; echo
fi
if [ "${ORCLADMINPWD}" != "${ORCLADMINPWD2}" ]
then
echo "The input passwords are not matched";
exit 1;
fi
# Check if orcladmin password is correct
${ORACLE_HOME}/bin/ldapbind -h ${OIDHOST} -p ${OIDPORT} -D 'cn=orcladmin' -w ${ORCLADMINPWD} 1>/dev/null 2>/dev/null
if [ $? -ne 0 ]; then
echo "Incorrect orcladmin password specified"
exit 1;
fi
echo " "
if [ ${SCUSB} = "A" ] ; then
printf "Please enter the subscriber common user search base [orclcommonusersearchbase]: "
read SCUSB
if [ "${SCUSB}" = "" ]
then
SCUSB=`${ORACLE_HOME}/bin/ldapsearch -h ${OIDHOST} -p ${OIDPORT} -D 'cn=orcladmin' -w ${ORCLADMINPWD} -s base -b 'cn=common,cn=products,cn=oraclecontext' -L 'objectclass=*' orclcommonusersearchbase | head -2 | grep -v 'dn:' | awk '{printf $2}'`
fi
fi
if [ ${PRGDN} = "A" ] ; then
printf "Please enter the Plug-in Request Group DN: "
read PRGDN
fi
if [ ${EP} = "A" ] ; then
printf "Please enter the exception entry property [(!(objectclass=orcladuser))]: "
read EP
if [ "${EP}" = "" ]
then
EP='(!(objectclass=orcladuser))'
fi
fi
echo " "
printf "Do you want to setup the backup Active Directory for failover? (y/n) "
read ISFAILOVER
if [ "${ISFAILOVER}" = "y" ]
then
if [ ${SECADHOST} = "A" ] ; then
printf "Please enter the backup Active Directory host name: "
read SECADHOST
if [ "${SECADHOST}" = "" ]
then
echo "Backup Active Directory host name is required";
exit 1;
fi
fi
printf "Do you want to use SSL to connect to the backup Active Directory? (y/n) "
read ISFAILOVERSSL
if [ "${ISFAILOVERSSL}" = "n" ]
then
if [ ${SECADPORT} = "1" ] ; then
printf "Please enter the backup Active Directory port number [389]: "
read SECADPORT
if [ "${SECADPORT}" = "" ]
then
SECADPORT="389"
fi
fi
fi
if [ "${ISFAILOVERSSL}" = "y" ]
then
if [ ${SECADSSLPORT} = "1" ] ; then
printf "Please enter the backup Active Directory SSL port number [636]: "
read SECADSSLPORT
if [ "${SECADSSLPORT}" = "" ]
then
SECADSSLPORT="636"
fi
fi
if [ ${SECWALLETLOC} = "A" ] ; then
echo " "
printf "Please enter Oracle wallet location: "
read SECWALLETLOC
fi
## wallet location is required
if [ "${SECWALLETLOC}" = "" ]
then
echo "Oracle wallet location is required";
exit 1;
fi
if [ ${SECWALLETPWD} = "A" ] ; then
printf "Please enter Oracle wallet password: "
stty -echo ; read SECWALLETPWD ; stty echo ; echo
fi
if [ "${SECWALLETPWD}" = "" ]
then
echo "Oracle wallet password is required";
exit 1;
fi
if [ ${SECWALLETPWD2} = "A" ] ; then
printf "Please enter confirmed Oracle wallet password: "
stty -echo ; read SECWALLETPWD2 ; stty echo ; echo
fi
     if [ "${SECWALLETPWD}" != "${SECWALLETPWD2}" ]
     then
     echo "The input passwords are not matched";
     exit 1;
     fi
fi
fi
# install the plug-in PL/SQL packages
echo " "
echo "Installing Plug-in Packages ..."
echo " "
# install plug-in debug tool
cp $ORACLE_HOME/ldap/admin/oidspdsu.pls $LDAP_LOG
chmod +w $LDAP_LOG/oidspdsu.pls
echo "EXIT;" >> $LDAP_LOG/oidspdsu.pls
${CMDNAME} @$LDAP_LOG/oidspdsu.pls
rm $LDAP_LOG/oidspdsu.pls
${CMDNAME} @$ORACLE_HOME/ldap/admin/oidspdof.pls
# install plug-in packages
${CMDNAME} @$ORACLE_HOME/ldap/admin/oidspad2.pls ${ISSSL} ${ADHOST} ${ADPORT} ${ADHOST} ${ADPORT} ${ADHOST} ${ADSSLPORT} ${WALLETLOC} ${WALLETPWD} ${ADHOST} ${ADSSLPORT} ${WALLETLOC} ${WALLETPWD} ${ISFAILOVER} ${ISFAILOVERSSL} ${SECADHOST} ${SECADPORT} ${SECADHOST} ${SECADPORT} ${SECADHOST} ${SECADSSLPORT} ${SECWALLETLOC} ${SECWALLETPWD} ${SECADHOST} ${SECADSSLPORT} ${SECWALLETLOC} ${SECWALLETPWD} ${ISSSL} ${ADHOST} ${ADPORT} ${ADHOST} ${ADPORT} ${ADHOST} ${ADSSLPORT} ${WALLETLOC} ${WALLETPWD} ${ADHOST} ${ADSSLPORT} ${WALLETLOC} ${WALLETPWD} ${ISFAILOVER} ${ISFAILOVERSSL} ${SECADHOST} ${SECADPORT} ${SECADHOST} ${SECADPORT} ${SECADHOST} ${SECADSSLPORT} ${SECWALLETLOC} ${SECWALLETPWD} ${SECADHOST} ${SECADSSLPORT} ${SECWALLETLOC} ${SECWALLETPWD} 2>&1 ; stty echo ; echo
#stty -echo; eval ${CMDNAME} @$ORACLE_HOME/ldap/admin/oidspad2.pls ${ISSSL} ${ADHOST} ${ADPORT} ${ADHOST} ${ADPORT} ${ADHOST} ${ADSSLPORT} ${WALLETLOC} ${WALLETPWD} ${ADHOST} ${ADSSLPORT} ${WALLETLOC} ${WALLETPWD} ${ISFAILOVER} ${ISFAILOVERSSL} ${SECADHOST} ${SECADPORT} ${SECADHOST} ${SECADPORT} ${SECADHOST} ${SECADSSLPORT} ${SECWALLETLOC} ${SECWALLETPWD} ${SECADHOST} ${SECADSSLPORT} ${SECWALLETLOC} ${SECWALLETPWD} ${ISSSL} ${ADHOST} ${ADPORT} ${ADHOST} ${ADPORT} ${ADHOST} ${ADSSLPORT} ${WALLETLOC} ${WALLETPWD} ${ADHOST} ${ADSSLPORT} ${WALLETLOC} ${WALLETPWD} ${ISFAILOVER} ${ISFAILOVERSSL} ${SECADHOST} ${SECADPORT} ${SECADHOST} ${SECADPORT} ${SECADHOST} ${SECADSSLPORT} ${SECWALLETLOC} ${SECWALLETPWD} ${SECADHOST} ${SECADSSLPORT} ${SECWALLETLOC} ${SECWALLETPWD} 2>&1 ; stty echo ; echo
# usessl, adhost, adport, adhost, adsslport, walletloc, walletpwd
# isfailover, isfailoverssl, sechost, secport, sechost, secsslport
# secwalletloc, secwalletpwd
# usessl, adhost, adport, adhost, adsslport, walletloc, walletpwd
# isfailover, isfailoverssl, sechost, secport, sechost, secsslport
# secwalletloc, secwalletpwd
# register the plug-ins
echo " "
echo "Registering Plug-ins ..."
echo " "
$ORACLE_HOME/bin/ldapadd -h ${OIDHOST} -p ${OIDPORT} -D cn=orcladmin -w ${ORCLADMINPWD} << EOF
dn: cn=adwhencompare2,cn=plugin,cn=subconfigsubentry
objectclass:orclPluginConfig
objectclass:top
orclpluginname:OIDADPSW2
orclplugintype:operational
orclplugintiming:when
orclpluginldapoperation:ldapcompare
orclpluginenable:1
orclpluginversion:1.0.1
orclPluginIsReplace:1
cn:adwhencompare2
orclpluginsubscriberdnlist:${SCUSB}
orclpluginattributelist:userpassword
orclpluginrequestgroup:${PRGDN}
orclpluginentryproperties:${EP}
dn: cn=adwhenbind2,cn=plugin,cn=subconfigsubentry
objectclass:orclPluginConfig
objectclass:top
orclpluginname:OIDADPSW2
orclplugintype:operational
orclplugintiming:when
orclpluginldapoperation:ldapbind
orclpluginenable:1
orclpluginversion:1.0.1
orclPluginIsReplace:1
cn:adwhenbind2
orclpluginsubscriberdnlist:${SCUSB}
orclpluginrequestgroup:${PRGDN}
orclpluginentryproperties:${EP}
EOF
cat <<DONE
Done.
DONE

Hi,
This is a problem that is not made clear in the note. What is probably happening here is that both plugins are being fired when a user logs in. OID will only read the value returned from the final plugin to fire. This can be a problem if the user authenticates correctly against the first plug-in but fails on the second. This is entirely legitimate as this note tells you to configure this way but the OID only observes the final result. The note doesn't tell us this.
Here's an example:
We've two OID User users in different containers: cn=Al is in container cn=usersA,dc=oracle,dc=com and cn=BOB is in container cn=usersB,dc=oracle,dc=com.
We have two plugins: pluginA and PluginB. Installed in that order.
When Al logs in the two plugins fire. pluginA finds Al and returns a true, but then pluginB fires and returns a false undoing the good result. OID only accepts the final answer and so rejects the user. When Bob logins in both plugins fire again but it's the second plugin that returns the answer again. This is true and bob gets in.
There's a couple of ways around this and one of the more effective ways is to associate the plugin with the dn. So in our example, we associate the pluginA to fire only for the dn cn=usersA,dc=oracle,dc=com and pluginB only to fire when a user is in cn=usersB,dc=oracle,dc=com. This gets around the problem of mulitple plugins firing and giving conflicting answers as the appropriate plugin only fires once.
I've used this solution in a realtime environment when connecting and provisioning multiple ADs into one OID and found it to be extremely effective.
Another solution is to associate the plugins with groups.
Both of these options may be configured easily by modifying the plugin properties in ODM. Don't forget to restart OID after you've made the changes.
HTH!
Phil.
If

Making plug-ins always active

Every time I start Firefox, I have to manually change two of my plug-ins from "Never Activate" to "Always Activate". The two plug-is are "Shockwave Flash" and "Silverlight Plug-in". When I change the feature to "Always Activate" it does not hold. Am I missing something like a save feature etc.?

Firefox sometimes does not save updated preferences due to a problem with the prefs.js file (e.g., it is locked by another process). If you notice other settings not saving, such as your preferred home page, or Tab options, etc., that could be a factor.
Your saved settings also can be overridden by other software creating a user.js file.
For both of those issues, please see this support article: [[How to fix preferences that won't save]].
Some utility software, such as Advanced SystemCare, will roll back settings changes when you exit Firefox. This is meant to protect you from unwanted changes, but also blocks you from making changes. You should check whether any of your utility, security, or system cleaning software has this feature.
A final possibility is malware, but hopefully that won't be the issue here. If you want to supplement your regular security software, you can use some of the free tools listed in our support article: [[Troubleshoot Firefox issues caused by malware]].

Need help! I have a plug-ins issue in illustrator CS4 after updating my MAC OS from Mavericks to the new YOSIMITE

Hi,
My Adobe CS 4 ran perfectly find up until I updated my MAC OS from Mavericks to the new YOSIMITE. When I launch illustrator CS4 I get a window message the reads "some plug-ins in the additional Plug-ins folder are conflicting with application or user plug-ins. It will skip loading plug-ins from additional plug-ins folder." there is a OK button that I must click on to close the message window and then illustrator will continue loading process, then a second window will appear reading "Error loading plug-ins. PhotoshopImport.aip" there is a OK button that I must click on to close the message window and then illustrator will continue loading and launch.
The problem is when I open a current file that has a psd link I will get a window message reading "could not find a plug-in to read the link file _______ choose repair to locate the missing file, replace to select another file, or ignore to leave the link unchange." When selecting a psd link /file it is greyed out which I cannot select it. I can not select, choose, import or open any files/links that is a psd.
Would someone please help me resolve this issue please!!!

I have the same issue! Did you get a solution yet?

Audio plug ins (stillwell audio) appear even after deleted

I had some stillwell audio plug ins, they didnt ned them anymore so i deleted them, did a system search and deleted all the files that have to relate to stillwell plug ins, then went on to ableton and logic(I installed logic after the start of the iusse) and they still appeared and are still fully functional, so I went on searching for these files even deeper and couldent find them, they dont exist when i search them. so i contacted stillwell customer service and they listed how to find the files and i did all what they said and it still shows up, so now im asking the apple community, DO YOU GUYS KNOW WHATS GOING ON!!
thanks, teliik

Hello TELIIK,
It sounds like you just did a search for the plug-ins, but I found an article that tells you exactly where to look for these plug-ins:
Finding Audio Units plug-ins on your computer
http://support.apple.com/kb/HT1295
The important part of this article states:
The Apple Audio Units plug-ins are built into the operating system and do not appear as discrete files. Plug-ins from other manufacturers appear as individual components on your hard disk. They may be found in two places:
/Library/Audio/Plug-Ins/Components
~/Library/Audio/Plug-Ins/Components ("~" represents your home directory.)
The ~/Library is a hidden folder in Lion and Mountain Lion. You can find instructions for accessing it here:
OS X Mountain Lion: What is the Library folder?
http://support.apple.com/kb/PH11395
The Library folder is hidden. If you need to open it, make sure you are in the Finder, hold down the Option key, and then choose Go > Library.
I hope this helps you locate those those plug-ins!
Best,
Sheila M.

Missing plug-ins in Logic Pro X after updating OS X Yosemite to 10.10.2

I just updated Yosemite from 10.10.1 to 10.10.2 on my MacBook Pro and opened Logic X after the reboot to find that all of my plug-ins are missing. This includes not only the third party plug-ins that I have installed on my machine but specifically with this session file, the Apple/Logic plug-ins are missing as they are the only ones I was using.
I've deleted the cache file in the library/audiounits folder on my machine thinking there was some glitch there but that did not help.
Does Logic X somehow open in 64bit in Yosemite and the Apple plug-ins are opening at 32bit thus rendering them incompatible? I've read that that Logic X does not support 32bit plug-ins but if that were true why are the Apple plug-ins missing, they are 64bit correct?
btw, where has the Audio Units Manger been moved to in Logic X?

I just uninstalled/reinstalled Logic X. Apple plug-ins are still missing.
Has anyone heard of anything like this? I can't find any mention of this specific issue online here or elsewhere...

Plug-ins Needed for SMP Target Users

No Strobe Media Playback plug-ins are available to the SMP target audience.
The Introducing Strobe Media Playback presentation says:
Our target audience for Strobe Media Playback and Flash Media Playback are designers, content owners, enterprises, and developers who want to get started easily with an out-of-the-box, feature rich media player. Strobe Media Playback allows you to spend more time on creating content than focusing on how to build, or what media player to use.
So the SMP target audience is not Flash developers.
That same presentation says the target audience includes "bloggers, small business" ...
The majority of bloggers and people who build small business websites are not progammers of any sort, let alone Flash developers.
Currently the only way to obtain or test any SMP plugins is to build them from the source.
And the plug-in examples included in the SMP download package demo pages do not include the actual plug-in file making it impossible to actually complete the working demo.
So basically no plugins are currently available to the SMP target audience.
Please make working plug-ins available for download.
Along with some examples and/or documentation of how to use them.
The analytics and advertising plug-ins would be a good start.
Thanks.
Ken McD

This is a continuation from another thread on the same subject:
http://forums.adobe.com/message/3240034#3240034
From Greg H
Re: Does .f4m manifest work with Akamai HD network and strobe player
Hi Ken,
You wrote:
"The big gaping hole is demonstrating working plug-ins and documentation for those plug-ins."
For SMP, might including analytics plug-ins be a good start?
If you are looking for "demonstrating working plug-ins" the following two analytics plug-ins are accessible:
* GTrack Plug-in
http://www.realeyes.com/blog/2010/09/27/announcing-google-analytics-pl ug-in-for-osmf-the-gtrack-plug-in-2/
* TubeMogul InPlay Analytics
http://tubemogul.com/public/showPage/osmf_plugin
There also are plug-in samples in the OSMF project that perhaps could be suited to your effort.
fwiw, Although OSMF is **OPEN**, many current plug-in partners are not.
I have pursued an effort similar to what you currently are doing.
It is awesome that the partners are supporting OSMF, however as I contacted them responses such as "That document is for customers only" was very common.
btw, My reply is forking this thread.
If you respond to this response (regarding plug-ins in general), please open a new thread cross referencing this one.
I will see your reply either way.
btw #2, I would be interested in the link to the "demo website" you mentioned (if it is public).
hth,
g
(my god it is hard to simply quote another post in this "forum")
Thanks for the input Greg.
I had already saved the TubeMogul example as it has some good documentation.
The GTrack analytics plugin looks great.
And very good documentation.
But again, the file is not available.
Users must build it from the source.
This eliminates the majority of the potential users.
Regarding the demo website:
The demo website is not yet online.
I have added demos for the usual stuff - FLV, F4V, MP4, MOV.
And the latest streaming stuff - F4M, DVR, etc.
And M3U playlists.
Added the 3 Flash Access DRM examples found here in this forum.
Like to add SMIL demos when the plugin becomes available.
I have made demos for whatever is available from Adobe and Akamai (that I can find).
Which at this point includes no plug-ins whatsoever.
Will let you know when it is online.
Regards,
Ken McD

Plug-ins for Active Standby on Nokia 6110 Navigato...

Is there any way to get other active standby screen plugins on the Nokia 6110 Navigator? I have callender but I'd also like Bluetooth, messages etc. I have a Voda UK branded one.

Good paulrouy - what a team - can you play sweeper
Today Me Tomorrow You

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

ANN: LR/Mogrify integration with Jeffrey Friedl's Plug-ins and LR/Transporters

Hi all,
You've been asking for this, and thanks to Jeffrey's hard work it's now possible.
LR/Mogrify can now be used in tandem with any of Jeffrey's plug-ins and with my own LR/Transporter. Here are the appropriate links :
http://regex.info/blog/2008-01-15/692
http://timothyarmes.com/lrmogrify.php
http://timothyarmes.com/lrtransporter.php
Regards,
Tim

Congratulations, Tim!
Piglet architecture and your cooperation with Jeffrey so impressed me!
Now your tools fit to my workflow and work quite well for me.
(I am using transporter + mogrify piglet for automatic JPG proofs preparation and export to separate folder tree)
The main problem now (I am on PC) is spawning MOGRIFY.EXE - it is popping up for each image on top of the other windows and take focus, not allowing to do anything on PC until export finished.
I think it should be the way to use CORE_RL_magick_.dll directly from LUA code.
If not, spawning MOGRIFY.EXE _minimized_ will help alot.
Thank you for you geat tool again!
Grafin

Enable plug-ins in Safari

I was told that I should have enable plug-ins unchecked in safari preferences because of hackers. Do I need to do this?

You are referring to Flash and Java. If you need them, keep them activated. However, if you don't need them, it's better to uninstall them. To turn off Java, just go to Safari menu > Preferences > Security and untick "Enable Java".
The main problem with them is that they have a lot of security problems, so it's better not to use them. If you have to use them, just be careful and keep them updated to the latest version

Great plug-ins coming out, but.....

so now we get all these great new plug-ins coming out....all say they are "not destructive" but they don't work on raw files, they just make a new psd file with the setting applied (which by the way cannot be edited at that point)...i guess it is not destructive but also not really all that helpful....
is there a way to apply these plug-ins to more then one file? lift&stamp? i guess i would not really want to add 50 full size psd files to my raw files anyway?
all these plug-ins seem to be targeted toward people who adjust one shot at a time....i happen to be a professional studio shooter and need to make adjustments to one frame and apply them to the next 100-500 (all with the exact same light conditions)....even better: added automatically when the file comes in tethered! i guess that will never work with the plug-ins? even if apple finally makes that happen for adjustments with a future aperture upgrade?

i left LR because of several features that aperture has and LR might not get for a while...
the whole plug-in thing sounded great but now it almost seems to backfire in the worst way, because apple might think they don't have to improve aperture, 3rd party will add functionality anyway....which is NOT the way this should work....the color/hue/sat/curve controls in LR are a lot better, maybe even better then viveza (except for the local effect) and they work on raw files...which is the whole point....
i agree that it is nice to have to go to PS less and less but for me it will never go away completely and i don't look at full size versions as a solution to not having to go to PS!
the worst thing is that (like some else mentioned here) the adjustments are final after you hit save and there is no way to copy/re-apply them for the next file....completely worthless...
especially for the price...
btw: i bought the dpmatte plug-in....horrible...don't go there....there is no control over the softness of the edge...

What happened to the plug-ins in CS6? Can you move them from CS5 to CS6?

Have they been renamed and placed in another folder/area? Or am I asking the obvious?

You SHOULD NOT move plug-ins from any Photoshop install to another Photoshop install unless you know what you are doing!
You should run the plug-in installer so it can do the right thing. If your plug-in installer cannot "see" Photoshop CS6 then contact the developer of the plug-in so they can create a new installer for you.
If your plug-in is using Extension Manager make sure you run the correct version of Extension Manager for the suite app you are trying to install into. Extension Manager CS6 for Photoshop CS6 for example. You can right click or control click on the extension and pick the Extension Manager to launch.
WARNING: Most of the time, users who try to manually copy, end up with not only a plug-in that will not work but a broken Photoshop that will not launch! You are better off working with the plug-in manufacturer.

Checking my plug ins there is a list of plugs that are not active. How do I find out if I should turn them on or not? Clicked on research no help?

When I checked the plug ins there are some that are not active. How do I know which ones to make active? When I clicked on research it just took me to a google search with a lot of different site to go to. Is there a way or a place to find out which ones should be activated? When I go to a site general don't understand what they are talking about. There were some that I thought I should activate, but don't want to do that with out checking. Last time I did something with out checking had lots and lots of problems. (some REALLY GREAT PEOPLE on this site helped me get things working again) Want to avoid that situation if possible. Thanks

You need to go to add-ons, and when it opens up, there are a list of things to the side, and then click extensions.

Is there any plug-ins for static code analysis in Jdeveloper

Hi,
Is there any PMD, check style and static code analysis plug-ins available for JDeveloper? Those are available for Eclipse. How to achieve that in the JDeveloper?
Regards,
Raghu.

This should help-
PMD plugin for JDeveloper 11.1.2.0
http://develishdevelopment.wordpress.com/2012/03/12/have-released-pmd-jdeveloper-extension-4-3/
Always mention you Jdev version. Here I just assumed yours :P

Should enhancements (code plug-ins) be activated in target after transport?

Similar Messages

Maybe you are looking for