Should I install Print Services as a role for a single server env no domain

I have a OAS application using converted UNIVERSE code to work with withSQL server. The application works fine and local users and groups will do the job. I have been tasked with replacing UNIX based printing to Windows based printing. Don't need LDP services
either. Does it make sense to install print services for about 30-40 printers or just set them up local. There will be about 10 different forms and i will have to be able to re-direct jobs, pause jobs, re-queue jobs, and disable\enable the printers.
I don't know that version 3 or 4 printer drivers matter because the same printer driver will be used for a majority of print jobs. As a matter of fact there are 5 or 6 different drivers needed. This is setting on a 100 MB backbone with GB access to the server.

Hi,
Print Services enables you to share printers on a network and centralize print server and network printer management tasks by using the Print Management snap-in.
Print Management helps you monitor print queues and receive notifications when print queues stop processing print jobs. It also enables you to migrate print servers and deploy printer connections by using Group Policy.
Print Services Role
http://technet.microsoft.com/library/cc732378(WS.10).aspx
I’m not quite clear about your current provisioning, as referred in the title, for single server without domain. I think this role is not necessary for you.
Hope this helps.

Similar Messages

REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

I am using a window 7 professional service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but the seller did not send me any installation CD or instruction
on how to use it.
Please how can I use it on my window 7 professional service pack 1.
Thank you.

Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server. I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008.
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Here is a lab guide for 2012 -
http://technet.microsoft.com/en-us/library/jj134160.aspx
But, the explanation of your environment begs the question - what are you trying to do? You say you have a desktop OS and you are talking about Windows Server products. In that light, your question does not make a lot of sense.
. : | : . : | : . tim

Hyper v virtual Machines should have installed integrated services or not ?

Hi
In my prodcution found hyper v virtual machines have no integrated services was installed should we installed on production servers is any impact if we didnt installed them.
if it should installed then what is the best approch to installed.
Thanks

You posted in the Group Policy forum...
That's a good question for the Hyper-V forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserverhyperv
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Want to Install 10.6 on Mini built for 10.6 Server - help?

Hi there - I'd recently bought a Mini Server running 10.6 Server Edition, and I'd like to install the regular 10.6 OS on it... but the Mini is not letting me. I keep getting the grey screen of death followed by a kernel puke every time I go to install.
Anyone got any hints on getting that normal 10.6 installed on hardware configured for 10.6 server?
For those wondering: I need the normal 10.6 OS so I can run MAMP. MAMP is not reco'd or supported by 10.6 server - http://forum.mamp.info/viewtopic.php?f=2&t=8062 I actually got MAMP running on 10.6 server... for a bit. Then it started throwing all sorts of errors, would not connect to MySQL, and then finally refused to launch. Ugh.
I will be using this Mini for web dev and running my install of ActiveCollab. Currently I have an older Mini running all of this, but it is running MAMP on 10.5 (not server edition) - and I'm just looking to update to the new Mini hardware, then take that older box and repurpose it somewhere. I actually blogged about the original 10.5 setup a while ago, the overall scenario has been updated a bit since then (not using Remote Desktop Transporter any longer or but it's roughly the same configuration as it was then: http://www.fatheaddesign.com/352/build-your-own-mac-dev-server-for-under-100/
Thanks so much for any assistance everyone, any help is very much appreciated!

Niel: Fantastic suggestion, and I am definitely going to try this.
Question though: if I can't get this Mini to boot from a normal OS install disc, then what happens in the future if I need to do any maintenance on it via bootable OS disc?
Just thinking out loud here, if that cloning method works than possibly I should do a mirror of the system onto a hard drive right after install, just in case. Then if anything happens I can either fall back on my Time Machine backups or do a clean reinstall from the mirror and then restore files from the Time Machine backup.

Cannot download and install printer software through app store for OS 10.8.5?

Help!
I have a MBP 15" Bought in late 2012. It is running 10.8.5.
I am trying to connect to the printer at my office, an HP CM4730 MFP.
When I go through the steps to add a new printer, I get to the message:
"Software for this printer is available from Apple. Would you like to download and install it?"
I click on 'Download and Install" and the systems startes to search for the software, however, every time i get the following message:
Setting up ‘HP Color LaserJet CM4730 MFP [15A0C9]…’
Can't install the software for the Hewlett-Packard HP Color LaserJet CM4730 MFP because it is not currently available from the Software Update server.
Can anyone out there point me in the right direction to get this installed.
Thanks!
-jose

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome?sp4t s.oid=3356524&ac.admitted=1392171422503.876444892.492883150

How can i find/ install printer driver hp laserjet 1010 for windows 7

Dear Sir/Madam
I have HP laserjet 1010 Perinter. my operating system is windows 7. my printer driver did't install. how can i find driver or software intall to my computer.
please give me some sjession. or download link
mr mintu
Cell. 8986272527
e-mail - [email protected]

The information available in the following weblink would help you to resolve the problem:
http://h30499.www3.hp.com/t5/Windows-7/hp-LaserJet-1010-driver-windows-7/td-p/1115411
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Should I install ATI DISPLAYS 4.5.7 for new X800 XT?

I installed the ATI X800 XT last evening (thing is awesome, BTW) and was wondering if I should install the ATI DISPLAYS 4.5.7 software or not. Reasons for/against?
Thanks.
Anthony

It depends on what you want to use your machine for. I'm using my G5 with that card as a media centre but I think that installing the ATI software causes the movies/tv show images to tear or have v-sync issues. Sadly it does mean I'm having to live with overscan on my machine as it's hooked up to an LCD TV and only the ATI software seems to fix this.
Hope this helps,
Andrew

How to Restrict printing the document using IRM for a Single Document?Allow printing for some documents and restrict the printing for particular documents in same document library?

Can we able to Configure the IRM in Document Level in SharePoint Document libraries?
The document library contains multiple document sets , Can we restrict the printing according to document sets? Allow printing for some documents and restrict the printing for particular documents in same document library
Is this possible?Please suggest.

Yes, that can be done. But note that all administrators will have the same right to print, so you need to make sure the users are not administrators. You can include a macro to disable printing, but if the users disable macro, they can print the documents.
Hence, there is no foolproof way to prevent printing documents. If you still need a foolproof security, PDF format provides password based security (viewing doesn't require a password) that can be implemented to prevent the document from printing,
which doesn't require any special scripts and is tough.
You can have a look at the following links:
http://msdn.microsoft.com/en-us/library/office/ms458245(v=office.14).aspx
http://msgroups.net/microsoft.public.word.docmanagement/prevent-printing-of-docum/91353
http://www.go4sharepoint.com/Forum/prevent-printing-saving-documents-10150.aspx
The following link explains about the security features in PDF. This is for information purpose only and not for promotion of any products:
http://www.pdflib.com/knowledge-base/pdf-security/
Balaji Kundalam

Installing a second HTML DB instance on a single server

I cloned a number of databases recently - they have all the HTML DB tables, workspaces, applications from the original database.
I modified the marvel.conf file to add some more DADs to point to the new instances.
I stopped and restarted the HTTP Server. (I did not touch the tnsnames.ora files)
When I tried to connect to the new instance with HTMLDB, I got the following error:
Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Oracle-HTTP-Server/1.3.28 Server at manlsidb01.thurnall.rts.int Port 7777
Where have I gone wrong?
A DAD entry:
          <Location /pls/exldev>
          SetHandler pls_handler
          Order deny,allow
          Allow from all
          AllowOverride None
          PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
          PlsqlDatabasePassword @BXSdVR/chPb1lFpNSc8ePhy/9VAT4fm7qA==
          PlsqlDatabaseConnectString manlsidb01:1521:exldev ServiceNameFormat
          PlsqlDefaultPage htmldb
          PlsqlDocumentTablename wwv_flow_file_objects$
          PlsqlDocumentPath docs
          PlsqlDocumentProcedure wwv_flow_file_manager.process_download
          PlsqlAuthenticationMode Basic
          PlsqlNLSLanguage AMERICAN_AMERICA.WE8MSWIN1252
          </Location>

The problem was that the account had been locked when I cloned the database using Database Configuration Assistant - the log file showed up the error.
I unlocked the account, removed the password encoding and it worked fine.
It would still be nice to know how to encode the password. Will it be encoded if I create the DAD from the Oracle HTTP Server (Components) web page (as described in the Installation Guide in $ORACLEHOME\marvel\doc\installationguide.html)?
Thanks for your updates and for a great product!

Hi..Iam an Architect...I would like to purchase a macbook pro 15.4 inch 512 gb, 16 gb.So i would like to know the possibilities and advantages of using 3d softwares and autocad.And also is 3dsmax available for mac os or should i install it with windows.

hi..Iam an Architect...I would like to purchase a macbook pro 15.4 inch 512 gb, 16 gb.So i would like to know the possibilities and advantages of using 3d softwares and autocad.And also is 3dsmax available for mac os or should i install it with windows.

System Requirements for AutoCAD 2013 for Mac:
Apple® Mac OS® X v10.8.0 or later (Mountain Lion), OS X v10.7.2 or later (Lion), or OS X v10.6.8 or later (Snow Leopard) with 64-bit Intel processor
Apple® Mac® Pro 4.1 or later; MacBook® Pro 5.1 or later (MacBook Pro 6.1 or later recommended); iMac® 8.1 or later (iMac 11.1 or later recommended); Mac® mini 3.1 or later (Mac mini 4.1 or later recommended); MacBook Air® 2.1 or later; MacBook® 5.1 or later (MacBook 7.1 or later recommended)
3 GB of RAM (4 GB recommended)
2.5 GB free disk space for download and installation (3 GB recommended)
All graphics cards on supported hardware
1,280 x 800 display with true color (1,600 x 1,200 recommended)
All Mac OS X supported language operating systems
Apple® Mouse, Apple Magic Mouse, Magic Trackpad, MacBook® Pro trackpad, or Microsoft-compliant mouse.
Mac OS X-compliant printer
Additional Requirements for 3D Modeling (All Configurations)
Pentium 4 or Athlon processor, 3 GHz or greater or Intel or AMD dual-core processor, 2 GHz or greater
4 GB RAM or more
6 GB hard disk space available in addition to free space required for installation
1,280 x 1,024 true color video display adapter 128 MB or greater, Pixel Shader 3.0 or greater, Direct3D®-capable workstation-class graphics card
3ds Max 2014 and 3ds Max Design 2014 are available for windows only:
System requirements for 3ds Max 2014 and 3ds Max Design 2014
Windows 8 or Windows® 7 64-bit Professional operating system
64-bit Intel or AMD multi core processor
4 GB RAM minimum (8 GB recommended)
4.5 GB free disk space for installation
3-button mouse
Latest version of Microsoft® Internet Explorer®, Apple® Safari®, or Mozilla® Firefox® web browser
Recommened Mac:
15-inch MacBook Pro with Retina display : 15.4-inch (diagonal) LED-backlit display with IPS technology
2880-by-1800 native resolution at 220 pixels per inch with support for millions of colors
Hardware
2.4GHz quad-core Quad-core Intel Core i7
16GB 1600MHz DDR3L SDRAM
512GB Flash Storage
Autodesk AutoCAD 2014 for Windows vs AutoCAD 2013 for Mac
USER INTERACTION Windows Mac
Command line
✓
✓
Multifunctional grips
✓
✓
Dynamic input
✓
✓
Auto-complete command entry2
✓
✓
Hide and isolate objects
✓
✓
Create and select similar objects
✓
✓
Delete duplicate objects
✓
✓
Properties palette
✓
✓
Quick properties palette
✓
Quick view
✓
✓
In-canvas viewport controls
✓
✓
Editable UCS icon
✓
✓
Layer tools3
✓
✓
Layer groups
✓
✓
Layer state manager4
✓
New layer notification
✓
Filter
✓
Quick select
✓
DesignCenter
✓
Tool palettes
✓
Content palette
✓
Navigation bar
✓
ShowMotion
✓
Coverflow navigation
✓
Multi-touch gestures
✓
AutoCorrect command entry
✓
File tabs
✓
DOCUMENTATION
Geometry creation & measurement tools
✓
✓
Parametric constraints
✓
✓
Associative arrays
✓
✓
Copy array
✓
✓
Object and layer transparency
✓
✓
Strike-through text
✓
✓
Blend curves
✓
✓
Multiple hatch editing
✓
✓
Sheet set manager
✓
Project manager
✓
Dynamic blocks5
✓
✓
Model documentation tools
✓
Table style editing
✓
Hatch creation preview
✓
Multiline style creation
✓
Digitizer integration
✓
Change space
✓
Express tools6
✓
Text align
✓
DESIGN
Solid, surface, and mesh modeling
✓
✓
Surface curve extraction
✓
✓
PressPull
✓
✓
Autodesk materials library
✓
✓
Material creation, editing, and mapping
✓
Basic rendering
✓
✓
Sun properties7
✓
✓
Visual styles7
✓
✓
Advanced rendering settings
✓
Camera creation
✓
Walkthroughs, flybys, and animations
✓
Autodesk ReCap point cloud tool
✓
Import Sketchup files (SKP)
✓
Geographic location
✓
CONNECTIVITY
External references (DWG)
✓
✓
Image underlays
✓
✓
PDF underlays
✓
✓
DWF underlays
✓
DGN underlays
✓
In-place editing of DWG references
✓
✓
Batch publish
✓
✓
Publish or plot to PDF
✓
✓
Plot styles
✓
✓
Plot style table editor
✓
✓
AutoCAD WS connectivity
✓
✓
Autodesk 360 connectivity
✓
Data links
✓
Data extraction
✓
Hyperlinks
✓
Markup set manager
✓
dbConnect manager
✓
eTransmit
✓
WMF import and export
✓
FBX import and export
✓
SAT import and export
✓
✓
Additional model import
✓
Design feed
✓
Share on Facebook
✓
LICENSING
Standalone licensing
✓
✓
Network licensing
✓
✓
Cross-platform licensing
✓

Bonjour Printer Services not working on Windows 7 anymore

I have my HP Deskjet F4450 connected via USB on my IMAC running 10.6.8.
I have it shared with everybody can print settings and can add it to both my Windows 7 laptops using Bonjour Printer Services 2.0.2 (it sees it and I can add it)
But when I print from Windows 7 it says that the test page is spooling but nothing happens, Nothing prints.
I have looked at a bunch of help files, but nothing has worked for me.
Did some Windows 7 Updates break the Bonjour printer Services application?
Thanks for any help.
Update: It worked about a month ago I know from each Windows laptop.
It prints fine from my MacBook.

I'm having the same issue, but with a Time Capsule. My MBA can print fine to it, but my Windows 7 desktop cannot. It sees the printer, and things queue up but never come out. Worked fine about a month ago but stopped.

HT200189 Why the VPN update for OS X server won't install?

Hello
Why the VPN update for OS X server won't install. It says "VPN update for OS X server can't be installed on the disk. This volume does not meet the requirements for this update" Any help would be appreciated. Thanks

Is OS X Server setup on your MBP as an actual Server running the Services or are you just using it so you can remotely manage another Mac running OS X Server services?
VPN Update for Mavericks Server
Note: the update will only install if you have already launched Server app and used it to set up services.

Why should we trust the web app pool account for delegation?

Hello,
Can someone explain to me why we must trust the web app pool account for delegation in AD?
here's what I understood:
{Client computer} {Web server}
{SQL Server}
domain\user1 ---auth. on web portal ----> [web portal]-domain\appPool-> the appPool account takes the identity of user1
correct ?
Thanks !

To enable the MBAM Servers to authenticate communication from the Administration and Monitoring Website and the Self-Service Portal,
you must register a Service Principal Name (SPN) for the host name under the domain account that you are using for the web application pool. More via https://technet.microsoft.com/en-us/library/dn645356.aspx?
Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: eskonr

Error: 0x80073701 when trying to add Print Services Role in Windows 2012 Standard

Hello,
I'm getting an error when trying to add Print Services role in Windows 2012 Standard. I'm getting the same error whether I use the GUI or from PowerShell.
This is a new server install.
The PowerShell error follows:
add-windowsfeature : The request to add or remove features on the specified server failed.
Installation of one or more roles, role services, or features failed.
The referenced assembly could not be found. Error: 0x80073701
At line:1 char:1
+ add-windowsfeature print-services
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
    Exception
    + FullyQualifiedErrorId : DISMAPI_Error__Failed_To_Enable_Updates,Microsoft.Windows.ServerManager.Commands.AddWind
   owsFeatureCommand
Success Restart Needed Exit Code      Feature Result
False   No             Failed         {}
Any help with this issue will be greatly appreciated.

Hi,
I think you should start with chkdsk C: /F and sfc /scannow.
Regards.
Vivian Wang

Installation of Client Access role fails on Windows Server 2008 R2 (Execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP")

Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin Wilson

Hello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson

Should I install Print Services as a role for a single server env no domain

Similar Messages

Maybe you are looking for