Should I unplug my AE when not in use?

I've read many reviews re: the short lifespan of AirPort Express. Is it advisable to unplug when not in use?

Many product reviews on the Apple site complain of poor performance and unexpectedly short life of the AirPort Express. Is there a reason why one should not unplug when not in use?

Similar Messages

  • Should I unplug my AE when not using it for months at a time?

    should I unplug my AE when not using it for months at a time?

    Yes, in my opinion.....unless you really like to have a green light "on" all the time.

  • Should AX be unplugged at night when not in use?

    ,

    FlexSF wrote:
    Should AX be unplugged at night when not in use?
    i'm using my two AX units for streaming content and have been unplugging them @ night for years - with not adverse effects so far.
    i also believe this will help save a little energy ...
    JGG

  • HP Officejet 6500a Should I turn it off when not in use?

    Is it better too turn off the printer when not in use for short periods say 2-4 hours? or days? (the manual does not explain this adequately) Thanks

    Hi,
    I normally turn my printers off to save few cents of electricity. No point to keep printers on unless you are having/doing business (expecting fax or something). Even at work, for a long weekend, we always turn our printers off.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Unplugging STBs when not in use?

    We've bought some power-saver surge protectors so we can unplug electronic devices when not in use.
    I know I have to keep the router plugged in, and I'll probably keep the DVR plugged in as well.
    But as for my other two STBs (one HD, one SD), is there any reason not to unplug those when not in use?  Do they need to stay connected to the network for any reason? 
    Since the first answer to most STB problems seems to be "try unplugging it first" it seems that regular unplugging should be okay, but will I wear them out early by essentially rebooting several times a week?

    Probably not a good idea. The stb's do not draw a lot of power so your not going to save much money. And Verizon is constantly updating and "upgrading" (this is debatable in some cases) the stbs, and they do it at night when it is least likely to affect people watching tv. If your boxes are unplugged they wont update when they are told to do it. Probably would not be a huge issue but why tempt fate.
    Now if you are going to be away for some time, like on a vacation, then yes, definitely unplug them. In fact unplug all your major electronics. But on a day to day basis, no, leave them plugged in.
    ====================================================================================
    Error exists between keyboard and chair.

  • Should I turn off my Mac Pro when not in use or leave it running?

    I have been told I should never turn off my computer by some people, and others say that I should always turn it off when not in use!  I use my Mac Pro primarily for music recording/editing in my home studio or word processing.  Now that I have an iPad I use that for web browsing, email, FBing, etc. and I find myself on my Mac Pro a lot less.  I get the basis behind both trains of thought; those who leave it on feel always stopping and starting up puts unnecessary wear on the moving disks, and those who shut down think if the parts are always moving they are bound to wear out faster.  I am not as concerned with conserving power as I am with keeping my machine safe!  If you have any information on this topic I would love to hear it. Thanks!

    Providing you have a robust firewal and are not worried as a result about being hacked then leave it turned on and allow it to sleep. Make sure you allow the screen to sleep as well a that is the item that is more prone to damage by being left on all the time.
    I never turn my machine off, never have with any of my Macs ever since my first one back in 1979-ish and have never suffered any adverse affects. Today, the power drain is so small when allowed to sleep that I doubt they would offend even the ardent 'turn off everything and pull out the plug to save the planet' person.
    If you have an iPad or iPod synced with the Mac for email and iCal and address Book etc. then if you leave it on it should be up to date as soon as you return home, mine is anyway. With iCloud coming out very soon that may come into play even more so with all its advance pushing etc. Just a thought.
    One advantage in leaving the machine on (sleep) is that you can access it from anywhere in the world should the need arise with the appropriate settings, which you can't if you turn it off.
    Leave it on.

  • Should I shut down my computer when not in use

    should I shut down my computer when not in use, overnight for instance?

    Hello! Leaving it on 24/7/365 is perfectly acceptable. You may save some electricity but personally I think you'll pay for it with a more troublesome system. I do however set the monitors to go to sleep. I like the no startup lag time of running 24/7/365. That said, if I lived in an area prone to electrical outages or if my location was prone to lightening strikes I'd probably shut it down and unplugged. Of course with it being unplugged the pram battery may run down. These old G4's have been running 24/7/365 for years now. I do try to restart every few weeks just for good measure! In the end it's your preference. The hardware works best when a constant temperature is maintained. Tom

  • My mac powers off when not in use and I must unplug to restart.

    My Mac powers of after not being used for a period of time.  I must unplug to restart.

    All ATVs go into sleep mode when not in use.
    Simply pressing the power button on the remote should wake the device up, is that not occurring?

  • Should Wireless Router be turned off when not in use?

    I successfully installed the Linksys Wireless G Broadband Router Model WRT54G.  It was very easy.
    I notice that it now appears to be "on" all the time, and I use my home PC & Laptop perhaps up to about only 2 hours a day.  Should I be turning it off when not in use?  Is it a potential security risk to always have it on?  If I do turn it off, is the only way to unplug the power adapter?  I can not locate any on/off button on the router.
    Thanks,
    Adam  

    You said your router was "very easy" to set up.  I hope that this does not mean that you skipped setting up security.  If your wireless router is not secured, having it on or using it is a security risk.  If your router is secured, then it is OK to leave it on 24/7.
    If your wireless is not secured, anyone in the area can log into your router and use your DSL line.  At a minimum, this wastes your bandwidth.  At a maximum, someone could send spam, visit child porn sites, distribute viruses, and give away copyrighted music  ---  all from a DSL account with your name on it!    Additionally, if your router is not secured, others can see what you are doing on the net, including seeing your bank account numbers, passwords, and credit card numbers.  So my advice is ... secure your system.
    In order to keep intruders off of your wireless system, you need to enable wireless security.  To do this, pick an SSID and don't broadcast it.  Encrypt your wireless system using the highest level of encryption that all of your wireless devices will support.  Common encryption methods are:
    WEP - poor  (see note below)
    WPA - good
    WPA2 - best
    WPA and WPA2 sometimes come in versions of "personal" and "enterprise".   Most home users should use "personal".  Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES.
    The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and passwords that match those you entered in the router. 
    For additional security, on many routers, you can limit wireless access to just the MAC addresses of the wireless devices that you own.  If possible, you should definitely use this feature.
    And don't forget to give your router a new login password.
    Also, when you pick your login password, SSID, and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers.  An SSID, or a login password, should be 12 characters or more.  WPA and WPA2 passwords should be at least 32 characters.
    Note below:  Recently the FBI demonstrated that WEP can be broken in under 5 minutes using standard, internet available, cracking tools.  This suggests that virtually all wireless users should upgrade their wireless equipment to WPA or better.
    Message Edited by toomanydonuts on 12-22-200601:05 AM

  • Apple TV powers off when not in use

    My Apple TV turns off when not in use and needs to be rebooted by unplugging device to "wake" it up  How do I avoid this?

    All ATVs go into sleep mode when not in use.
    Simply pressing the power button on the remote should wake the device up, is that not occurring?

  • Am I supposed to leave the display plugged in when not in use?

    should the display be left plugged in when not in use? is it just like leaving the power cord to the MacBoold Pro plugged in when the computer is off?
    thanks

    Sure, you can leave the display plugged into the socket, provided you turn OFF the display itself. There must be somewhere some switch or touch button that will turn the display OFF.
    Usually, those displays use a lot of power, so it's better to save
    I shall add an unrequested piece of advice: if you don't this already, please use some kind of electrical surge protector
    <http://en.wikipedia.org/wiki/Surge_protector> to connect your computer, display, printer, router, etc to the wall socket.

  • My ext HDs spin too hard when not in use , how do I slow em up ?

    some externals have the smarts about them but others just wizz too hard when not in use , old macs had a processor setting I could change  , but not MBP
    I should be able to tell these HDs to chill till I call on them right ?   thanks for any help[ you can offer me .
    cheers R

    You don't. You have no control over the spin rate of any hard drive.
    To encourage the external drive(s) to spin down when they aren't in use, System Prefs > Energy Saver > check the box for "Spin down hard disks when possible." But you'll find that the OS checks in on those drives quite frequently, spinning them back up again. So the likelihood of their spinning down very often or ever staying quiescent for long is small.

  • Firefox crashes when not in use then I have to reboot my computer

    Firefox crashes when not in use then I have to reboot the computer.
    It will not come back on line and the only way out of this is to reboot the computer.

    See:
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.com/kb/Firefox+crashes
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    * http://www.mozilla.com/plugincheck/
    # Shockwave Flash 10.1 r102
    # Java Plug-in 1.6.0_12 for Netscape Navigator (DLL Helper)
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://kb.mozillazine.org/Flash
    *http://www.adobe.com/software/flash/about/
    Update the [[Using the Java plugin with Firefox|Java]] plugin to the latest version.
    *http://kb.mozillazine.org/Java
    *http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

  • I have a MAC OSX 10.6.8 Is it better to keep it in sleep mode when not in use or shutting down?

    Mac OSX 10.6.8  Should I keep it in sleep mode when not in use to shut down?

    My experience with electronic tends to revolve around thermo stress, and removing all power vs going to sleep tends to be more or less the same.  Many components have power totally taken away, and others use so little power they cool off.
    However, I found thermo stress occurs a lot more with discrete electronic components  (like back in the '80s and our VAX-11/780's which had lot more discrete components) and less with integrated circuits.  NOTE: I'm not talking about overheating components, just normal heating/cooling cycles.
    All in all I would not worry about it.  The OP (Grace 1) should use whatever method is most convent for her.  And I would say if she is using a Macbook Air or the new Macbook Pro Retna display (or any other Mac with a solid state drive (SSD)), then booting from shutdown may not take all that long anyway.

  • Imac shuts down when not in use

    I purchased my 21.5" imac July 9, 2011 with Snow Leopard. No problems for 1 month. Then about August 12th or so, my imac started to mysteriously "shut down" when not in use. I'll be working on it, then get up to go pour myself a cup of coffee or something...then I come back to my computer that has now shut off. It is NOT asleep...it is OFF. So I turn it back on and it is fine. This has happened a few times now within a week. Anyone else have this problem?
    By the way, I am now running Lyon, as of August 18th. When the imac shut down, I was usually viewing photos or on the web.
    thanks!

    First thing I would try is to reset the SMC, it can help with power related problems. Shut down the Mac and unplug everything including the power. Press and hold down the power button for 10 seconds. Plug in the computer but be careful not to press the power button as you are plugging it in. Wait a few seconds and turn it on. Hopefully it won't happen again. There is always Apple Support. Don't let the problem persist until your free phone tech support has expired (3 months). I would also recommend using the iMac with an UPS, and at the very least, a high quality surge protector.
    If you have MS Word or a similar word processor you could try enabling the autosave feature and set it to 1 minute intervals. Keep a document open and if you come back to the computer and it has shut down, you can look at the last time the document was updated and know what time the comptuer turned itself off. It could be useful in diagnosing the problem.

Maybe you are looking for