Should PreparedStatement close before continue next PreparedStatement ?

Hi guys,
For instance, I need to use PreparedStatement for several insert and update like below:
Connection conn; // got the connection
PreparedStatement pstmt = conn.prepareStatement("insert ......");
pstmt.addBatch();
pstmt.executeBatch();
*// should I do a pstmt.close() here ?????????*
pstmt = conn.prepareStatement("update......");
pstmt.addBatch();
pstmt.executeBatch();
Thanks & Regards,
Mark

kmthien wrote:
Yes, I am using apache DBCP and using the example code here :
http://www.freshblurbs.com/jakarta-commons-dbcp-tutorial#comment-544
However, In my class, I need to connect to 2 database, 1 is local and another 1 is remote.Location doesn't matter.
I don't know how to create and initialize 2 connection pooling as when I initialize 2 connection pooling, it jus treated it as 1 only.This is of course completely different from your first question. Did you google?

Similar Messages

  • PreparedStatement.Close()

    I'm using the same PreparedStatement object for many querys on a method, I think this is ok, isn't it? So... Do I need to call the PreparedStatement.close() method between every query? Can I call the close method many times without calling the executeQuery() method?
    Thanks
    Eduardo Castor

    Do not close the PreparedStatement until your program ends (or until you do not need it any more). You can use it repeatedly without closing it.

  • PreparedStatement.close() hangs, blocking finalization

    We encountered an incident on a production system with a class that would call PreparedStatement.close() on finalize(), and there was an instance where the jvm finalizer thread stalled on this the PreparedStatement.close() call, blocking garbage collection.
    The last sql statement run with the preparedstatement was most probably a select statement (we cannot determine for sure), and the OCI driver was used.
    While I realize it's not recommended to close PreparedStatements on finalize(), can I ask for some possible reasons why the close() call would stall? Would it be a database issue or a java issue?

    Can you do the close() in a PhantomReference? That might be a good alternative to using finalize(). These refs are rather obscure and most Java authors parrot the usual line about post-mortem cleanup, but if you dig deep enough you can find a few examples of its use (I think that there is Apache group source with an example).
    If you are running in a servlet, move the close() to the servlet destroy() method.
    The best solution is to use 10.2 implicit connection caching and close all your Connections immediatly after use in a finally block. Then close your DataSource in the destroy().

  • How do I get rid of the blank space after one paragraph and before the next paragraph startsin Pages '09?  I understand that I should not have a page break mid paragraph but that is what I want.

    How do I get rid of the blank space after one paragraph and before the next paragraph startsin Pages '09?  I understand that I should not have a page break mid paragraph but that is what I want.

    Hi stephanie,
    These are unrelated questions/statements.
    Space before and space after a paragraph are controled in the Text Inspector, as you've found out.
    Pages will create a page break whenever there is no room for another line on the page. That break can come anywhere in a paragraph.
    You may be thinking of Widow and Orphan prevention, and the other Pagination controls, found under the More button in the Text Inspector. (If that's what you found, then thanks for the refresher! I hadn't been to that pane for awhile, and had forgotten the variety of pagination controls available.
    Regards,
    Barry

  • HT201250 Hi what is the next system that I should upgrade from Mac OS X 10.6.8? And, should I backup before downloading it?

    Hi what is the next system that I should upgrade from Mac OS X 10.6.8? And, should I backup before downloading it?

    You should backup before installing any new system updates or upgrades. Depending upon what your machine is qualified for you could upgrade to Lion or Mountain Lion.
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • Should I close close Parallels before installing Mountain Lion?

    Should I close Parallels before installing Mountain Lion?

    Thanks, William, for the speedy reply.  I hope I'm one of the lucky ones that can give the update 5 stars.  I upgraded my Parallels to version 8 and found a slight speed increase. Everything is backed up in case the upgrade causes problems.

  • [svn:fx-trunk] 9407: Reordering the if-statement in isMeasureFixed() exposed that hostFormat can be null when measure() is called if styles changed and measure is done before the next commitProperties .

    Revision: 9407
    Author:   [email protected]
    Date:     2009-08-19 15:11:34 -0700 (Wed, 19 Aug 2009)
    Log Message:
    Reordering the if-statement in isMeasureFixed() exposed that hostFormat can be null when measure() is called if styles changed and measure is done before the next commitProperties.  This states test exposed this.
    We should rethink if we want to clear hostFormat rather than have a hostFormatChanged flag.  If there is no hostFormat at measure then it has to be fixed because there is no line break format to check for auto-size.
    QE notes:
    Doc notes:
    Bugs: SDK-22779
    Reviewer: Gordon
    Tests run: checkintests
    Is noteworthy for integration: no
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-22779
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/RichEditableText.as

    Oh my god, it is too long! You definitely check out types, casting and especially ODP.Net (it does everything for you)... etc. They can help you to simplify your code. I do not have enough time to copy paste it to Studio and understand and solve your issue, so I got title of your message as your main question.
    In Oracle, you can create an autonumber field by using sequences object. This is really useful when you need to create a unique number to act as a primary key.
    Basically you can create a sequence simply typing;
    CREATE SEQUENCE MY_SEQUENCE;
    now you have a sequence called "MY_SEQUENCE"... Then, I advice you select a number from sequence;
    select MY_SEQUENCE.nextval from dual;
    I said I advice actually kinda must, although it called sequence, I cannot be sequential. Do not even try to predict the value. You can be sure that it is unique number so you can use it.
    Then insert you record and use that number part of your primary key. I think that's it. Have fun.

  • An uninvited web page comes up when i am working on the net. It takes over and then when i try to close it an information window comes up that says close to continue and cancel to stay on this page. well I can't close it and i dont' want to continue.

    How do i close a page that says hit close to continue and cancel to stay on the page?

    Do a malware check with a few malware scan programs.<br />
    You need to use all programs because each detects different malware.<br />
    Make sure that you update each program to get the latest version of the database before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

  • Modal Dialog won't close before tasks complete..

    Hi all,
    Basic, but quite infuriating problem. Because Illustrator doesn't allow palette type windows, nothing can happen whilst the dialog is open. So, I've been using scripts I wrote over six months ago now for producing sets of scale elevations of my designs with filled out title-blocks etc.. Which have literally saved me a good half-hour per drawing set I need to produce.
    The time has come for a test function for one of the parameters in my dialog though, because at the moment it requires careful judgement to guestimate the number and a failure means a lot of undoing (deleting a dozen files that the script creates once it starts etc).
    So I've coded in a test button into my dialog, setup the callback handler onClick and tested everything, and the sequence of events I would like to occur is as follows;
    Dialog closes - dlg.close()
    My Scaling operation occurs
    The script pauses for three seconds
    then undoes the action - app.undo()
    and reopens the dialog - dlg.show()
    Every one of these events is tried and tested.. But they occur out of order when I run the script because each action runs at a different rate. setTimeout also doesn't work in Adobe's javascript (at least not in Illustrator), so I can't individually delay items.
    So I've been testing bits in isolation to troubleshoot.. And I'm most concerned that the dialog close before any actions run - as this seems to cause the hold-up. A friend who is far more adept than I tells me it's because the dialog takes ownership, and as such the script dies if the dialog closes. If this is the case, is there a way I can create a false parent or prevent the dialog from doing this?
    Try this code to see what I mean - clicking test should close the dialog, pause for three seconds and display its message.
    If you comment out the while and if statements and their respective closing braces, you'll see that the dialog holds before closing. That code is there to ensure it closes before doing anything.
    You should run this from Extendscript so you can halt it - else it will loop indefinitely. Note that Extendscript does behave differently; Illustrator halts when you click test, Extendscript appears to close the dialog but does nothing thereafter, however it still loops.
    var test;
    // Pause Function
    function pause(msec)
    var done = null;
    var date = new Date();
    var curDate = null;
    do curDate = new Date();
    while(curDate-date < msec);
    var done = 1;
    return done;
    dlg = new Window('dialog', 'Parameter Entry', [0,0,480,384]);
    dlg.center();
    dlg.testField = dlg.add('panel', [20,65,460,105], 'Scale Factor');
    dlg.testField.titleEt = dlg.testField.add('button', [385,5,420,25], 'Test', {name: 'testButton'});
    dlg.add('button', [315,337,385,360], 'OK', {name: 'ok'});
    dlg.add('button', [395,337,465,360], 'Cancel', {name: 'cancel'});
    function testButtonOnClick()
    dlg.closeresult = dlg.close(1);
    while (dlg.closeresult < 1) {
    if (dlg.closeresult == 1) {
    pause(3000);
    alert('If you can make this display - email me!');
    // TEST SEQUENCE (CLOSE DIALOG, SCALE IMAGE, 3SEC PAUSE, UNDO, REOPEN DIALOG)
    dlg.testField.testButton.onClick = testButtonOnClick;
    dlg.result = dlg.show();
    if (dlg.result == 1) { // OK
    // MAIN PROGRAM CODE

    Erm, well, I'd say that your nested loop will have 100 iterations. I assume you are missing a break statement somewhere but as I don't know your application...
    One other observation - surely the if statement (in the else if) is not required? Either something is equals or it is not?
    Whoops - sorry - 81 iterations as pointed out below!
    Edited by: Tom.Sanders on 12-Apr-2008 19:37

  • When I open Lightbox Gallery  I don't see "close", "prev" or "next" tabs on my pictures.

    In Dreamwever CS5, when I open my lightbox gallery it works fine in liveview. and when i open it in my preview broswers it works in all of them. But when I uploaded it to my site it only works if I use Safari browser to view my site. When I open my lightbox gallery on my site in Firefox or Internet explore I can't see the "close", "prev" or "next" tabs. I can click where they should be and it works fine but can't see the tabs. I'm using DW CS5 and would also like to add discriptions to my pictures if possible.

    you are missing the lightbox folder that has the CSS, images, and js folders inside it. just add that at the same level as the OTHER images folder for lightbox on your server and it should be fine

  • ** Is it possible to skip messages with error in BPM and continue next msg

    Hi Friends,
    I am doing File to File BPM scenario. My Source XML is like as below.
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:Employee xmlns:ns0="http://www.test.com/XITEST/FileToFile/BPM">
       <Details>
          <EmpCode>10010</EmpCode>
          <EmpName>Jeg</EmpName>
          <***>M</***>
          <BasicPay>5000</BasicPay>
       </Details>
       <Details>
          <EmpCode>10011</EmpCode>
          <EmpName>Praksh</EmpName>
          <***>M</***>
          <BasicPay>4500</BasicPay>
       </Details>
       <Details>
          <EmpCode>10012</EmpCode>
          <EmpName>Nithya</EmpName>
          <***>F</***>
          <BasicPay>4300</BasicPay>
       </Details>
       <Details>
          <EmpCode>10013</EmpCode>
          <EmpName>Sunil</EmpName>
          <***>F</***>
          <BasicPay>4800</BasicPay>
       </Details>
       <Details>
          <EmpCode>10014</EmpCode>
          <EmpName>Abdul</EmpName>
          <***>M</***>
          <BasicPay>4750</BasicPay>
       </Details>
       <Details>
          <EmpCode>10015</EmpCode>
          <EmpName>Sathya</EmpName>
          <***>F</***>
          <BasicPay>4250</BasicPay>
       </Details>
       <Details>
          <EmpCode>10016</EmpCode>
          <EmpName>Rams</EmpName>
          <***>M</***>
          <BasicPay>8000</BasicPay>
       </Details>
    </ns0:Employee>
    If you look at the above message, the 3rd & 6th employee are female. In the BPM design,  we use
    a) 'Transformation' step, to split the messages (1:n).
    b) Block Step (Mode : For Each) to process one by one message
    c) in the Container Step, thru XPath expression we created one variable and assign '***' to that variable
    d) In the Switch step we check whether variable is 'F' (Female). If it is there we insert control step to throw exception. (But, exception Branch is not added to catch the exception. The reason is that to restart the BPM)
    e) If the *** is 'M' we insert Send Step to send the employee to the output file.
    Note that if we insert exception handler branch, the BPM will tell this is completed. So, we are not able to restart those records (*** = 'F') after correct ***. Once the BPM is completed, that work item will not come in tcode 'Continue Process Following Error' option in tcode SXMB_MONI_BPE
    Requirement is whenever the BPM encounters *** = 'F', it  should throw an error and the same time BPM should not stop and continue with the next records.
    Friends, we tried all the ways thru 'Queue Assignment' property of the BPM and made settings thru tcode SWF_INB_CONF. But, we are not able to achive this requirmenent.
    'Restart possibilitye of the BPM for the error record and the same time should process the remaining correct records'. 
    Any idea friends, to solve this issue.
    Kindly Reply,
    Jeg P.

    Use one more Receiver Abstract interface for this and do the message and interface mapping .
    Collecting :
    If ur record is female (u r checking this in swich step) ,  pass tht record to intreface mapping (use one branch here to collect the message).
    Else you send that message to the target(else branch)
    After that use one block for collecting messages and throw the exception for each record......

  • 2 Qs PRIMARY Q: Should one compact before deleting TB email or vice versa

    HELLO, MY PRIMARY QUESTION: Apparently compacting is part of deletion. But should one Compact before Deleting TB email or Vice Versa OR does it matter which comes first?
    SECONDARY NOTE & QUESTION;i have read the article on compacting but still do not know exactly what this word means- (e.g. does it means compressing & why is it absolutely necessary for deletion? In this regard the TB compacting article says in PERTINENT part; "IF the message is marked as DELETED or moved, Thunderbird SKIPS that message and moves onto the next message." The preceding quote would seem to say that compacting is not part of deletion, yet i know (or think I know) that both deleting a email and compacting it are necessary for its TOTAL DELETION in TB. Can anyone explain this seeming contradiction? ( I used to use Outlook and i do not remember the term "compacting" with that system).
    ANY ANSWER TO EITHER QUESTION WOULD BE GREATLY APPRECIATED. THANK YOU

    Deleting a message marks it for deletion and hides it. Compacting actually removes it and frees up the disk space. Delete then compact.
    Despite the poorly chosen name compacting has nothing to do with compressing files as in zipping them.

  • Why should we close a connection

    Hi,
    Connection conn = DriverManager.getConnection (databaseUrl, userName, userPassword);
    Why should we close a connection
    conn.close();
    Even when i give no "close command", it works !
    Thank You
    Edited by: ashipj on ?? ????????, ???? ?:?? ???????

    My code frequently fetches data from database, so i created a class like this
    public class ConnectToDatabase
    /*             public ConnectToDatabase()
                                    Connection conn;
         public ResultSet selectS(String userQuery) throws Exception
              String userName = "root";
              String userPassword = "gal";
              String databaseUrl = "jdbc:mysql://localhost:3306/test";
              Class.forName ("com.mysql.jdbc.Driver");
              Connection conn = DriverManager.getConnection (databaseUrl, userName, userPassword);
              String query = userQuery;
              Statement S=conn.createStatement();
              ResultSet RS=S.executeQuery(query);
                                    //conn.close;
              return RS;
                                    //conn.close;
    /*              public void closeConnection()
                                    conn.close;
    }and from the main code i make call as given below (it works fine)
    ConnectToDatabase CTD=new ConnectToDatabase();
    ResultSet result=CTD.selectS(String userQuery);
    //CTD.closeConnection();Now my problem is
    1) If try to give "conn.close()" before "return RS;" It will show error (RS cannot be fetched after closing connectio)
    2) If write conn.close after return it wont be executed (ofcourse - unreachable statement)
    3) If use "CTD.closeConnection();" it gives errror saying that "cannot find conn(in closeConnection()) " i dont know why constructor is noy loaded.

  • I am not able to login the facbook. It is displaying the message ;Cookies are not enabled on your browser. Please adjust this in your security preferences before continuing.

    I am not able to log-in the facebook.
    It is displaying the message that "Cookies are not enabled on your browser. Please adjust this in your security preferences before continuing."

    [[Enabling and disabling cookies]] should work... if it doesn't, you may try
    # [[Websites say cookies are blocked]] and
    # if 1 doesn't help, then possibly see [[preferences are not saved]] if that's the case.

  • Firefox keeps saving my tabs from several months ago - the same tabs! Even though I close them, the next time I restart, there they are. I was using a previous version of FF, now upgraded to 6 and same thing is happening.

    Firefox keeps saving my tabs from several months ago - the same tabs! Even though I close them, the next time I restart, there they are. I was using a previous version of FF, now upgraded to 6 and same thing is happening.

    Thanks for the reply. I never get the option to "Restore Previous History" from History. I don't even have the box checked that asks to delete the history when Firefox closes. I don't know what's wrong, no matter what, I always lose everything. I have the box marked "Show my windows and tabs from last time" for when I open Firefox, but it never shows that, just my homepage. Also, when I check my History, it only shows the pages that I opened since I started Firefox, nothing from before. Even if I were to open up 10 pages now, close Firefox, and open it, the history would only show the homepage that opened this time, not any of the 10 pages that I opened 5 minutes ago.

Maybe you are looking for