Show more products per page in catalog

I'm trying to set up my catalog and it's only displaying 12 items per page leaving me with 13 pages of items. Is there any way for me to have it display 60 items per page or something similar?
I got it to display 6 items across using {tag_productlist,6} but can't get it to display a set amount vertically.

Edit cause provided info was wrong..... sorry I got mix up with other module layouts...
I am not completly sure if I understood what are you trying to do. But I think that with this you may manage what you trying.
Business Catalyst Help | Using custom templates for modules
You could show your last post using a specific template.
Hope it helps

Similar Messages

How do you get table column names to show one time per page

I have a report where I want the column names to show one time per page.
I have the table with the column names set below the header and above the
'for-each Row'.
When I view the report in PDF format the colunm names show only one time on the first page and on the other pages the column names do not show at all. If I view the report in RTF, the same thing happens, shows column names on the first page, but not on the other pages after that.
I highlighted the table and went to table properties, clicked on ROW tab and then checked (Repeat as header row at the top of each page) and it still does not work for PDF or RTF format. I have looked at other forums with this issue and it doesn't work for me in PDF format.
Could someone tell me what I am doing wrong.....
I appreciate anyone that can help me.
Thank you,
Susie

I figured out what I was doing wrong.
I was creating a seperate table for the column names and not using the table where the column names where created originally. I deleted the column names from the original table and created a seperate table above that table with the column names only.
So I went back to the original table and highlighted the row with the column names and went to table properties/ROW tab/ and clicked (Repeat as header row at the top of each page) and now it works perfectly in PDF format where the column names show one time for each page. Deleted the other table where I had the column names only.
thanks
Susie

Can the Portal Activity Report show unique users per page?

Hello all
I guess this is a rather simple question, but can someone tell me if the portal activity report can show a count of unique users per page per week for instance?
Or will it just show which users have visited the page in a list without aggregating them to a number? And if the users are aggregated to a number, is it only uniwue users that are counted for the given period?
Regards,
Martin

Hi sogaard,
It shows the no of unique logons.isnt it.
Try these blogs
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5497
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5436
Hope this helps
Regards
Vineeth

IN XML PUBLISHER REPORT WHICH SHOWS 5 RECORDS PER PAGE REG:-

{color:#0000ff}Dear All,
Conditionally, i want my XML Report has to be Display only 5 Records per Page..
If there are hundreds of records in XML file.
Please, could u help me out..
Waiting for ur reply..
Regards,
Sarfraz.
{color}

For 11i, pl see the XML Publisher User Guide at http://download.oracle.com/docs/cd/B25516_18/current/html/docset.html on how to achieve this
HTH
Srini

Mail merge 2 or more records per page...

Hi. OK, I can't stop using AppleWorks. I just purchased Bento ...oh man we have a long way to go... My question is: How can I make the most of a sheet of paper when I am trying to merge 2 or more small documents to a page? That is, I don't want to print out one page per merged document when I can easily get three or four on a sheet (stacked) I remember that it was posted here in the past. Can any one help on this? Thanks so much. J Langlois

Two possible solutions:
Set up your "merge" as a Labels layout, defining the label so as to fit as many to the page as you wish.
OR
Set up your merge document as a full page document, using 4x the font size you want on the printed version (for 4 docs to a page), then use the Layout menu item in the Print dialogue to have your printer print four pages to one sheet. This method depends on your print driver supporting this Layout feature.
Regards,
Barry

How can I print more photos per page?

Hi
I have an HP Photosmart printer
When I send an email with a photo attachment to my eprinter it prints the photo 1/4 of an A4 page for each photo. This is ok, and great quality, but it means i'm using a while peice of photo paper for each photo. Even if i flip the paper and reuse it I'm still only utilising 1/2 the A4 page leaving 1/2 wasted. I have two important question.
1. Is it possible to set the printer up to prlint a photo at full a4 size?
2. Is it piossible for the printer to print 4 photos per a4 page?
Thanks in advance.
Henry

Hello theatty,
If you are using the ePrint service to print photos here is what you need to know. ePrint settings can be changed by logging into ePrintCenter, and selecting print options on the left side of the ePrint panel. Here you will find settings for color options and paper size. Print options only apply to documents not photos. Here is the answer for question 1 Photo files will always be printed in 4x6. Here is the answer for question 2 currently there are no ePrint options to print multiple photos on 1 page.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
(Although I am employed by HP, I am speaking for myself and not for HP)

Browser Only Shows 35 Rows per Page

I have a Business Exploder query that I display on the web. However, it only shows 35 pages at a time. Can I increase this to all rows? I don't see an option in the query properties, and I don't have access to any stylesheets.
Thanks.

For table web item, set the specific property - "Number of Data Rows displayed" to 0 (zero) This will show all of the records returned.
But be careful about large number of rows as browser will go for a spin. It does not stops as excel does for 6000 rows.

SQL Report - PDF Report Printing. How to show one row per page?

Hello
I have successfully created a simple SQL Report.
Than I enabled Report Printing to PDF (default Report Layout).
Export to PDF is working good by default.
Now I want to see one report row per one PDF page. Is it possible?
How I can change the amount of rows per PDF page using default report layout?
I tried to create a User Layout with MSWord Plugin. it's quite suitable for data forms.
But I still did not find a way around for my question.

I would create an User Layout (.rtf) with MSWord. Load your XML data and use the table wizzard to put the fields in your document.
Put this code after your last field and before the 'E' (= <?end for-each?> tag):
<?split-by-page-break:?>

Issue in pagination of pivotal view (10 rows per page)???

Hi All,
I’m implementing pagination in pivotal view, report has to show 10 records per page.
Report has to show for 8 weeks data per employee and 10 employees information per page, however report is displaying data for more than 10 employees and for a week single week, in second page its showing for 2 week and so on ….
I used all the following functions however issue persists.
1. FLOOR(RCOUNT(1) /10)
2. CEILING((RCOUNT(1))/10.0)
3. TRUNCATE((RCOUNT(1)-1)/10, 0) +1
4. CASE when rcount(1)<11 then '1-10' when rcount(1)<21 then '11-20' when rcount(1)<31 then '21-30' else '30+' end
Any suggestions
Thanks,
SMA

Look in criteria add one more column
in FX write this formula
Go to the formula window of this column and enter the formula shown below
CASE WHEN RCOUNT(1) < 11 THEN ‘1-10′
WHEN RCOUNT(1) < 21 THEN ‘11-20′
WHEN RCOUNT(1) < 31 THEN ‘21-30′
ELSE ‘30+’ END
Once this is done, drag and drop this column into the Pages section of your pivot table. Now you can paginate through your pivot table report.
let us know if its solve your problem
Thanks

IPhoto 7.1.3 and printing multiple photos per page

I cannot get multiple prints to layout (or print) properly. IOW, I cannot get the product to render multiple photos to a single sheet layout.
- selected multiple photos (say 5)
- Hit Print icon (or select Print from File menu)
- Paper Size: choose 8.5x11
- Print Size: choose 3x5
- Hit 'Customize' button
- It is showing 1 photo per page (5 pages)
- Select 'Settings'
- Select 'Multiple photos per page'
- Hit 'OK'
- No change - still a single photo per page
- Print preview shows same - 5 pages each with only a single print.
- Same occurs if I originally select 2,3,4.... prints.
Perhaps noteworthy: I am using a printer (only available printer) that is attached to another iMac on my wireless network.
Any help appreciated. About 30 minutes searching this discussion board hasn't been fruitful.

Michael
Welcome to the Apple user discussion forums
- selected multiple photos (say 5)
- Hit Print icon (or select Print from File menu)
- Paper Size: choose 8.5x11
- Print Size: choose 3x5
When I do these steps my preview shows 4 photo on the page (the maximum number of 3 x 5 you can fit on an 9.5 x 11 sheet) without going to the customize menu - and it works on three different printers
Try deleting your iPhoto preferences (finder ==> "your username" ==>preferences ==> com.apple.iPhoto.plist), launch iPhoto, reset any preferences you have set and see if it will work
It should be very easy and straight forward with only the first four steps being needed for this
LN

Data Merge, its is possible to display 5 records per page?

I have no problem doing data merges. They always seem to only show one record per page, but is there a way to be able to display more records per page?

Read the help for a full explanation, then come back here with specific questions if you still have problems...
Basically, you set up a single instance of field placeholders on you page, then select multiple records per page in the merge options. You cannot specify a number directly, but ID will reprduce as many records on the page as all elements will fit using the spacing settings you set up, so you might want to add an empty frame the size required to get your five instances with zero spacing and group it with the field tags.

Limit records per page in the horizontal looper?

Might sound confusing, but I'm wondering if/how I can use the horizontal looper to show 30 records per page?
For example, I have a photo thumbnail collection. I want to show 5 columns and 10 rows. Is there a way to get the looper to put a link to the 'next 50' so the user can see the next 50 thumbnails (starting at thumbnail 51 of course)?
thanks

I guessing here but there must be a bit of php code that you can edit that limits the number of records to be displayed instead of the default value of 10.

Set Maximum Rows Per Page not working

I want to display 50 rows per page and I tried the below but still I can see the default 15 rows per page.
Home>Application Builder>Application 301>Page 51>Interactive Report Attributes>Search Bar>Maximum Rows Per Page
Set to = 50
Home>Application Builder>Application 301>Page 51>Interactive Report Attributes>Search Bar>Rows Per Page Selector
Removed the check mark and still shows 15 rows per page.

Run your report. Set the Rows to 50. Press Go. Select 'Save Report' from the 'magic wheel' menu and next select 'Save as default report settings'.
It is a rather long way, but seems the only one...
Roel

Is it possible to datamerge more than one image per page?

I am building a product catalogue using datamerge. Is it possible to data merge more than one image per page? (ie I have a logo, product image and dimensioned drawing to go with each product page)
What would the coding be for the Data Field Name?
Would it be
@Logo
@Product Image
@Dimension Drawing
Add image fields in the data source file
By adding image fields to the data source file, you can allow a different image to appear on each merged record. For example, when you merge documents that include information from various companies, you may want to include an image of each company’s logo as part of the merge.
Open the data source file.
At the beginning of the data field name, type an “at” symbol (@) to insert text or paths that refer to image files.The @ symbol is required only in the first line; subsequent lines should include the image paths. Paths, which are case-sensitive, must follow the naming conventions of the operating system in which they’re stored.
If you get an error message when you type the @ symbol at the beginning of the field, type an apostrophe (') before the @ symbol (such as '@Photos) to validate the function. Some applications, such as Microsoft Excel, reserve the @ symbol for functions.
(Windows) Example of image references in data source file
Bill Tucker
36
C:\Photos\BillTucker.jpg
Dat Nguyen
53
C:\MyDocuments\dat.gif
Maria Ruiz
26
C:\Photos\Ruiz.psd
(Mac OS) Example of image references in data source file
Bill Tucker
36
Mac HD:Photos:BillTucker.jpg
Dat Nguyen
53
Desktop:Family:dat.gif
Maria Ruiz
26
Mac HD:Photos:Ruiz.psd
You can use InDesign to view the path of an image on your operating system. Insert an image in an InDesign document, and then use the Links panel to view the image’s location. With the image selected, choose Copy Info > Copy Full Path from the Links panel menu. You may need to edit the path after you paste it in your data source. This technique is especially useful for images on a server.

anna-rees wrote:
I am building a product catalogue using datamerge. Is it possible to data merge more than one image per page? (ie I have a logo, product image and dimensioned drawing to go with each product page)
What would the coding be for the Data Field Name?
Would it be
@Logo
@Product Image
@Dimension Drawing
Yes, pretty much exactly as you describe. You would then just add those fields to the boxes in your page. I tend to add an apostrophe before the @ symbol in Excel so it doesn't think it's a function - as per text you quoted above.
If you get an error message when you type the @ symbol at the beginning of the field, type an apostrophe (') before the @ symbol (such as '@Photos) to validate the function. Some applications, such as Microsoft Excel, reserve the @ symbol for functions.

Could show more columns at detail page?

we are new at html db, there are a few of questions we need to clear before we make decision to use HTML DB to develop our next version of application: (I seperate them at differenct topics).
* By click link at query result page (table may has 5 columns), could show more columns at detail page (may 10 columns) with editable mode?
Thanks
Lei

one way to do this would be to have your link take you to another similar looking page in your app that's an updatable report for the 10 columns you need. you could use our "tabular form" wizard to create that updatable report (if your tablular form is going to joining multiple tables, you might need to create an updatable view on the tables and build your form off that. you could also build that tabular form yourself. we have a how-to doc, "Build tabular forms for multi-row operations", for that at http://otn.oracle.com/products/database/htmldb/howtos/index.html ).
regards,
raj

Show more products per page in catalog

Similar Messages

Maybe you are looking for