Show only a few results at a time on Tree

Hey,
I've got my tree and set it to only show 15 results at a time, but I want a button to go to the next 15.
I have a feeling that it's a really simple action but I can't figure it out.
How do I do it?
Thanks

Actually I have one tiny issue now.
When I expand a node in the tree and click nextSet, that node stays expanded (but it isn't the same value, so it shouldn't be).
From looking at the documentation it seems that I need to use a TreeState class and an action to open or close the nodes.
My problem though is that I already have the nextSet and previousSet actions tied to the buttons, so is there a way I can have two actions so it collapses all nodes AND goes to the next set?
Thanks again for all your help.

Similar Messages

HT4623 I already have ios 7.0 installed in my iphone 4S. Although the size of ios 7.0.2 shows only a few MB, but when i click update using from my itunes it shows it is downloading 1.19GB. Why is this ? Do i have to download 1.19 GB?

I already have ios 7.0 installed in my iphone 4S. Although the size of ios 7.0.2 shows only a few MB, but when i click update using from my itunes it shows it is downloading 1.19GB. Why is this ? Do i have to download 1.19 GB?

If you update using iTunes, the full iOS is downloaded. If you update directly on your phone, this is called a "Delta" update, & only the changes to the iOS are downloaded. That's why you see the difference you see.

How do I show only ONE iCal calendar at a time?

I'm using iCal to manage several different calendars on different websites and also have different calendars of my own. Currently they all show in iCal and this is getting very difficult to manage. How do I adjust iCal to show only the events associated with one calendar, e.g. the calendar I have clicked on, rather than all of them? Do they all have to show?

Thanks - that's better than nothing, but switching them off/ on is still a bit fiddly as I will want to update different calendars frequently.
I was hoping that it would be possible to set it up to simply show the calendar you had clicked on on at the moment, and also to set a default set of calendars to be on as a group (i.e. those I use to organise my own time).
With one click I could then go from my personal calendars to one used for an external website and back again.

Showing only a few records in a region

Hi Guys,
I am creating a shopping page using OA F/w.
In this page i have created a search screen and there is a shopping cart at the upper right corner.
Now my requirement is to show shopping cart like this
Shopping Cart
Number of items: x
item1 qty1
item2 qty2
item3 qty3
item4 qty4
item5 qty5
more...
what i have achieved so far is
i have created a content container.
I have got the items and quantities (using child attribute feature in a stach layout region)
now my requirement is
1. to show number of items
2. to show only 5 records (not using table region)
3. to show more link which will take to complete shopping cart.
can u please help me out with this
Thanks
Husain

instead of creating so many VOs, try something like this
1. From CO call a method in AM, something like public Vector getAllItems()
2. In that method in the AM, have a VO bring the items in the cart (VO.executeQuery())
3. Loop your VO and form a Vector of the items and return this vector to the CO.
4. In CO, when the method has returned , you have a Vector of all items.
5. size() method will give you the number of items
6. loop the vector, and paste the data in a bean in your content container
7. if loop becomed > 5 (means 6th row - i.e 5 items are already painted), then break; the loop and paint a more.. link instead of the item from the vector.
8. Clicking on the more link takes you to another page, navigate there and retain the AM while you go, so your VO also is present, you dont need to query again.
Thanks
Tapash

Show only a few of the most recent Gmail emails in Mail (use for sending)

Hello,
I recently set up Apple Mail, and even though I like the program a lot - I prefer to use Gmail to read and manage my emails. However, Mail is built in to many other Leopard applications, so I would prefer to use it with those (for sending purposes), such as in Preview. Therefore, I would like to know how to do the following:
- Make it not alter anything in my Gmail inbox
- Make it receive only a few of the most recent emails - or none
Would I have to use it through POP or IMAP for these things?
Thanks!

if you set up as pop, then you can choose the option to download from the day you created the account forward, thereby limiting the amount of emails that will be downloaded to mail. you would first have to enable pop in gmail>settings. with pop if you make a change in mail, in say your inbox, then that change will not be reflected in gmail on the web.
if you set up as imap, then what you see in gmail will be the same as what you see in mail as far as your emaisl/mailboxes... and chnages you make on one will be shown on the other.
hope this helps

I tried to import favourites from ie9 but only a few appeared.tried several times but the same result

it only imports a few fovourites not all

This earlier post may help.
https://discussions.apple.com/message/10859194#10859194
For me, (long winded way) I drag the playlist from the bottom tree to the iPod branch.
Then select iPod.
Click the music tab on the right window.
click sync tick music
go down to the playlist section and tick the playlist.
Apply.
Good Luck.

Can only copy few files at a time from DVD

I received two DVDs from our wedding photographer and when trying to copy a DVD with about 400 images to my Mac it always fails somewhere in the process, with the drive making a disconcerting scratching noise just before it stops. Once it fails the only option is to force quit Finder and then force restart. Tried copying all the files at once from the second DVD and same result.
I have been able to copy small batches files, a few at a time, and am up to about 100 of the 400 on disk one but it has taken hours. Sometimes it fails on a batch of 10, sometimes not, and I can always eventually copy the files in the failed batch do I don't think the files are corrupt on the DVD, nor do there appear to be any scratches. Each time it fails my only recourse is to force restart and try the batch again. At this rate it could take 20 hours to copy images from both DVDs.
Any idea how to fix this? Here is info on my drive:
MATSHITA DVD-R UJ-867:
Firmware Revision: HA13
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: To show the available burn speeds, insert a disc and choose View > Refresh

Thank you for the replies. After using both my laptop and another laptop to copy the files we finally got them all copied. Both laptops exhibited similar behavior on both DVDs so it probably is the type of DVDr (. The scratching was not the laser motor seeking to read the disk, rather it was relative to the spinning speed of the dvd, as if it were warped or had a piece sticking off of it, and it scratched more the faster the DVD spun, but the DVD looked to be fine. I have since tried other DVDs and they work fine so still not sure what the problem was but the files are on my HD now so that problem is solved.
-Lewis

Getting only a few records at a time.

Using a Select * from. Is there an option where I get only so many records. This is for a console application. I wanted some thing where it will display only 3 records at a time. And then I have the option of viewing the next 3 and then the next 3 records
and so on.
Any one have any ideas.
Merry Christmas EVERY ONE and thanks to all the members on msdn forums for helping me with my code.
Joe Moody
http://www.starfiresoft.com
Pro-Forums
Delta Force Barracks
On the Frontlines

Thanks. It doesn't matter as long as I can get it to work. The idea is to display 3 records at a time. Then the user should be able to go backward or forward in the list. Let me show you what I have. This will give you some idea on how I have it displaying
the info.
SqlCeCommand cm = new SqlCeCommand("SELECT * FROM users", cn);
//cm.Parameters.AddWithValue("@tooid", num);
//cm.Parameters.AddWithValue("@fromid", Id);
SqlCeDataReader rd = cm.ExecuteReader();
try
while (rd.Read())
Door.CursorRight(10);
Door.WriteLn("|0C___________________________________________________");
Door.CursorRight(10);
Door.WriteLn("|0FId |04: |03" + rd["Id"].ToString() + " |0FName |04: |03" + rd["username"].ToString());
Door.CursorRight(10);
Door.WriteLn("|0FStatus |04: |03" + rd["status"] + " |0FDate Jointed |04: |03" + rd["joindate"]);
Door.CursorRight(10);
Door.WriteLn("|0C___________________________________________________");
catch (Exception e)
throw new Exception(e.Message);
cn.Close();
This is inside of a do loop. and at the bottom I have it waiting for user input. or the user can quit and return to the main menu.
Door.WriteLn();
Door.Write("|07Page |0F<|04||0F> |0FQ|09)|0BQuit |07Choice |04: |0C");
cc = Char.ToUpper(Door.ReadKey());
Above is my prompt. This waits for user input. and I use a switch to tell the software what to do. Any way if you want to know what Door.writeLn() is, Think of it like this "Console.Writeline()". This is just a library I use for the kind of programming I
do.Any help would be great. Thanks and have a safe Xmas.
Joe.
http://www.df-barracks.com Delta Force Barracks
http://www.starfiresoft.com Starfire Software

Can you search/filter mail messages to show only messages sent at a certain time of day [e.g. AM or PM]?

Is it possible to search for message sent only during certain hours of the day?
At a minimum, the ability to see either AM or PM messages, and even better if you could limit search results to a range of hours of the day [e.g. messages sent between 8 PM and 11 PM].
I have not been able to find this documented online anywhere. Thank you!

Is it possible to search for message sent only during certain hours of the day?
At a minimum, the ability to see either AM or PM messages, and even better if you could limit search results to a range of hours of the day [e.g. messages sent between 8 PM and 11 PM].
I have not been able to find this documented online anywhere. Thank you!

How to Show only One Credit Column at a time

Hi,
        This is the Query :- it displays all the credit columns simultaneously
SELECT OINV.DocDate AS 'Posting date',
                      OCRD.GroupNum AS 'Payment Terms', OCRD.Balance AS 'Amount', OINV.DocTotal AS ' Debit Amount',
                      CASE WHEN OCRD.GroupNum = 7 THEN (OINV.DocTotal - OCRD.BALANCE) ELSE 0 END AS 'Credit 7',
                      CASE WHEN OCRD.GroupNum = 9 THEN (OINV.DocTotal - OCRD.BALANCE) ELSE 0 END AS 'Credi 9',
                      CASE WHEN OCRD.GroupNum = 5 THEN (OINV.DocTotal - OCRD.BALANCE) ELSE 0 END AS 'Credi 5',
OINV.DocDueDate AS 'Due date ',OINV.Address
FROM         OCRD INNER JOIN
                      OINV ON OINV.CardCode = OCRD.CardCode
WHERE (OINV.DocDate BETWEEN '04/08/11' AND '06/09/11' AND OINV.CardCode = 'C00356')
- it displays all the credit columns simultaneously
i want if GroupNum =7 then ,it should display the data in Credit 7 Column and rest Credit 5 and Credit 9 should be hide (Credit 5 and Credit 9 columns should not be shown in the data)
Similarly, if GroupNum =5 then, it should display the data is Credit 5 Column and rest Credit 7 and Credit 9 should be hide
similarly for GroupNum =9.
Kindly give me the solution for this problem.
Regards
Rahul

Hi Rahul.....
Try this.....
SELECT OINV.DocDate AS 'Posting date',
OCRD.GroupNum AS 'Payment Terms', OCRD.Balance AS 'Amount', OINV.DocTotal AS ' Debit Amount',
(Case When OCRD.GroupNum=7 Then (OINV.DocTotal - OCRD.BALANCE)
Else
Case When OCRD.GroupNum=9 Then (OINV.DocTotal - OCRD.BALANCE)
Else
Case When OCRD.GroupNum=5 Then (OINV.DocTotal - OCRD.BALANCE)
Else 0
End End End) As 'Credit',
OINV.DocDueDate AS 'Due date ',OINV.Address
FROM OCRD INNER JOIN
OINV ON OINV.CardCode = OCRD.CardCode
WHERE (OINV.DocDate BETWEEN '04/08/11' AND '06/09/11' AND OINV.CardCode = 'C00356')
Regards,
Rahul

Make download button show all download instead of only a few downloads.

Just updated from version 25.
Is there a way to make it show all download instead of showing only a few downloads when I click it the download button? Also, is there a way to make it automatically opens the show all download when I download a picture?

No to your second question. about:downloads it the page that show all the downloads.

Show only subset of labels from a data series

I'd like to show only a few labels from a given data series. I saw some work-arounds posted from 2010 (e.g., add a new series with just the items to be labeled; turn off all labels on original data series). Was wondering if it's possible to deal with each series-label individually now, thereby avoiding having to add extraneous series to my data.
Thank you.
B.

Thanks, Jerry. Very curious --- when I hide rows on my original table, those data aren't removed from my chart. So I built a new chart with new data and hiding rows on this new table does indeed remove those data from the chart. So something seems to be happening with my original data table.
But this is actually separate from what I was asking about. I'd like to keep all the columns in my chart and just have a few labeled. Was seeking a way to do that without adding a "For Labeling Only" column to my table (Excel let's one deal with column labels individually; figured Numbers might be able to do that, too). Here's how the workaround looks:
Thanks again for responding.
-Brian

TS1702 i if use "search" in music on my ipod touch 5th gen the result just show only album and playlist but nothing song result.whats wrong with it?please help

i if use "search" in music on my ipod touch 5th gen the result just show only album and playlist but nothing song result.whats wrong with it?please help

The users guide says:
Spotlight searches the following:
Contacts—All content
Apps—Titles
Music—Names of songs, artists, and albums, and the titles of podcasts and videos
Podcasts—Titles
Videos—Titles
Audiobooks—Titles
Notes—Text of notes
Calendar (Events)—Event titles, invitees, locations, and notes
Mail—To, From, and Subject fields of all accounts (the text of messages isn’t searched)
Reminders—Titles
Messages—Names and text of messages
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsynce all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event. Now it shows only one photo at a time. How do I get it back? Can you help?

When I open up iphoto and click on the events tab then double click on an event, it used to show minis of all the photos in that event. Now it shows only one photo at a time. How do I get it back? Can you help?

On the bottom bar of the window (on the left iPhoto 11, on the right in other versions) note the slider. Drag it left.
Regards
TD

HT1473 Often times when I copy a CD into my library it breaks the CD into more than one Album, all with the same name but with only a few of the songs on each. This happens whenever the CD has music with more than one artists...like maybe duets.

Often times when I copy a CD into my library it will break my CD into multiple albums in my library, each with only a few songs.
Usually this is because there might be songs where the artists has other artists in the song.
How can I compile all of the different albums (all with the same name by the way) back into one as was the original disc?

Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
tt2

Show only a few results at a time on Tree

Similar Messages

Maybe you are looking for