Show SQL Query is Incorrect
Crystal 11.5.0.313
I removed all conditions from the Select Expert but when I go to Database, Show SQL Query it includes a WHERE condition that is restricting the data. The report doesn't have any commands but one may have existed in the past. Is my report corrupt or something? How do I get it to "refresh" that SQL Query without having to recreate the whole report.
Thanks.
Edited by: mar123 on Jul 17, 2009 1:04 AM
Edited by: mar123 on Jul 17, 2009 1:05 AM
Hi,
Try to update datasource from .Database Expert->Set datasource.
Now refresh the report.
Regards,
Shweta
Similar Messages
-
Discoverer Report showing Null VS Show SQL query showing results !!!
I created a simple Cross Tab Discoverer report from a custom SQL which has a calculation for balances. The output is giving all null values even though there are balances. The output doesn't seem right. So I copied the query from Tools-->Show SQL and ran the query in the TOAD where I'm showing balances for the report. I don't understand why it is not showing in the discoverer. Please help.
Thanks
Edited by: PA1B on Jan 27, 2010 11:40 AMSorry for late reply.
Below is the Show SQL query. I don't think the query is application dependent. C_1 is my calculation.
SELECT o279709.SEGMENT3 as E279727,
o279709.SEGMENT4 as E279728,
CASE WHEN o279709.CURRENCY_CODE = 'USD' AND o279709.TRANSLATED_FLAG <> 'Y' THEN SUM(o279709.ENDING_BAL) ELSE 0 END as C_1,
GROUPING_ID(o279709.CURRENCY_CODE,o279709.SEGMENT3,o279709.SEGMENT4,o279709.TRANSLATED_FLAG) as GID
FROM ( --Foriegn Entity USD Balances
SELECT B.SEGMENT1,
B.SEGMENT2,
B.SEGMENT3,
(select distinct substr(cat.COMPILED_VALUE_ATTRIBUTES,5,1) from apps.fnd_flex_values cat
where FLEX_VALUE_SET_ID = (select bat.FLEX_VALUE_SET_ID from apps.fnd_id_flex_structures_vl aat, apps.fnd_id_flex_segments_vl bat
where bat.id_flex_code = 'GL#' and
bat.id_flex_code = aat.id_flex_code and
aat.APPLICATION_ID = bat.APPLICATION_ID and
aat.APPLICATION_ID = 101 and
bat.SEGMENT_NAME = 'Prime Account' and
aat.id_flex_num = bat.id_flex_num
and bat.id_flex_num in (select distinct chart_of_accounts_id from apps.gl_code_combinations gat
where gat.code_combination_id = A.code_combination_id))
and cat.flex_value = b.segment3) ACCT_TYPE ,
B.SEGMENT4,
B.SEGMENT5,
B.SEGMENT6,
B.SEGMENT7,
B.SEGMENT8,
B.SEGMENT9,
B.SEGMENT10,
B.SEGMENT11,
B.SEGMENT12,
B.SEGMENT13,
C.NAME,
A.SET_OF_BOOKS_ID,
A.CURRENCY_CODE,A.TRANSLATED_FLAG,
SUM(NVL(A.BEGIN_BALANCE_DR,0) - NVL(A.BEGIN_BALANCE_CR,0)) BEG_BAL,
SUM(NVL(A.PERIOD_NET_DR,0)) DEBITS,
SUM( NVL(A.PERIOD_NET_CR,0)) CREDITS ,
A.PERIOD_NAME,
SUM(NVL(A.BEGIN_BALANCE_DR,0) - NVL(A.BEGIN_BALANCE_CR,0))+ SUM(NVL(A.PERIOD_NET_DR,0) - NVL(A.PERIOD_NET_CR,0)) ENDING_BAL
FROM APPS.GL_BALANCES A ,
APPS.GL_CODE_COMBINATIONS B,
APPS.GL_SETS_OF_BOOKS C
WHERE A.CODE_COMBINATION_ID = B.CODE_COMBINATION_ID
--AND A.PERIOD_NAME = 'SEP-09'
AND C.SET_OF_BOOKS_ID = A.SET_OF_BOOKS_ID
--AND A.TRANSLATED_FLAG <> 'Y'
--AND B.SEGMENT1 = '83101'
--AND B.SEGMENT3 = '14602'
--AND A.SET_OF_BOOKS_ID = 77
--AND A.CURRENCY_CODE = 'USD'
GROUP BY A.CODE_COMBINATION_ID,
B.SEGMENT1,
B.SEGMENT2,
B.SEGMENT3,
B.SEGMENT4,
B.SEGMENT5,
B.SEGMENT6,
B.SEGMENT7,
B.SEGMENT8,
B.SEGMENT9,
B.SEGMENT10,
B.SEGMENT11,
B.SEGMENT12,
B.SEGMENT13,
A.CURRENCY_CODE,
A.TRANSLATED_FLAG,
C.NAME,A.PERIOD_NAME,
A.SET_OF_BOOKS_ID
) o279709
WHERE (o279709.PERIOD_NAME = 'DEC-09')
AND (o279709.SET_OF_BOOKS_ID <> 72)
AND (o279709.SEGMENT12 = '000')
AND (o279709.SEGMENT3 IN ('10101','10301','10502','12001'))
AND (o279709.SEGMENT1 IN ('82901','82902','82903','83001','83003','83201'))
GROUP BY GROUPING SETS(( o279709.CURRENCY_CODE,o279709.SEGMENT3,o279709.SEGMENT4,o279709.TRANSLATED_FLAG ),( o279709.SEGMENT3,o279709.SEGMENT4 ),( o279709.SEGMENT3 ))
HAVING (GROUP_ID()=0)
ORDER BY GID DESC;
Thanks,
PA1
Edited by: PA1B on Jan 29, 2010 12:50 PM -
Database - Show SQL Query question..
Greetings:
I am helping a co-worker with Crystal. I don't use crystal but I am able to explain the problem. My co worker is currently using crystal reports 8.5. If he pulls a query and the report is generated he can then click on Database menu then click on Show SQL Query. From there he is able to edit, add, remove fields. Now we want to place him on Crystal V10. When he does the same task, instead of being able to edit the Show SQL query he can only view it. Is there a way around this so that he can Edit the sql query in version 10 or did that feature go away in versions 9 and above. Also we are going to Purchase Crystal 2008, is this feature available in 08? Any help would be appreicated..Hi there!
I have the same problem as described above. I have been asked to figure out what is wrong with one of the reports that used to work when we used MAS 4.05. We are now on MAS 4.20 with Crystal Reports v.10 and the report fails to run. I loaded the report into Crystal to see if I could see the problem and I discovered that the report is still trying to access a table from the old MAS database. The SQL code as shown in the Show SQL Query window is as follows:
SELECT "AR_InvoiceHistoryHeader"."InvoiceNo", "AR_InvoiceHistoryDetail"."ItemCodeDesc", "AR_InvoiceHistoryDetail"."ItemCode", "AR_InvoiceHistoryDetail"."ExtensionAmt"
FROM "AR_InvoiceHistoryHeader" "AR_InvoiceHistoryHeader", "AR_InvoiceHistoryDetail" "AR_InvoiceHistoryDetail"
WHERE "AR_InvoiceHistoryHeader"."InvoiceNo"="AR_InvoiceHistoryDetail"."InvoiceNo" AND "AR_InvoiceHistoryHeader"."HeaderSeqNo"="AR_InvoiceHistoryDetail"."HeaderSeqNo" AND "AR_InvoiceHistoryHeader"."CommissionAmt"="AR_InvoiceHistoryDetail"."CommissionAmt" AND ARO_InvHistoryDetail."SOItemNumber" <> 'COMMENT' AND ARN_InvHistoryHeader."InvoiceDate" = {d '2007-09-21'}
ORDER BY "AR_InvoiceHistoryHeader"."InvoiceNo"
The problem is that ARN_InvHistoryHeader needs to be AR_InvoiceHistoryHeader and SOItemNumber needs to be ItemCode.
When I go into the Database Expert, I can only see the tables in the FROM clause. I don't know how to modify the WHERE clause. It kind of looks like this report was only partially converted to the new version. Is there a way to changed these attributes without rebuilding the whole report?
By the way, I apologize for not setting my SQL off in a code box, but I tried that and it caused the page to be very wide with no horizontal scroll bar.
Edited by: Jason Schill on Oct 27, 2008 11:30 PM -
Crystal's "Show SQL Query" like feature for OracleReports
Dear experts, after finding the solution for RDf to CrystalRPT conversion, i need to ask 3 possiblities rather asking the same solution millionth time :)..
1. Does oracle have some tool, internal lab built etc as seperate downloadable to serve as Crystal's "Show SQL Query".
2. Can OracleDesigner, OracleDiscoverer help in this regard, i found no Import RDF feature there
3. Can Oracle Optmizer be intercepted to show what resultant SQL(s) it ran for that report.
4. Is there any way to intercept, diagnnose the SQL runing at Database so we grab the SQLs from there.
I have opened an RDF in Notepad and though SQLs etc are visible unencrypted still it seems work of months or years for me.
very thank full.Can v$session, v$sql http://www.oracle-training.cc/oracle_tips_v$sql.htm help for this... how to see which SQLs are sent by a particular report by a particular machine.
-
How to enable show SQL Query in Crystal report tool
Hi,
How can we enable the show SQL Query under Database tab in crystal report...
We have a requirement to modify the SQL query in Crystal reports.
Thanks,
GanaGana,
CR has an "Add Command" feature that will allow you to use hand-coded SQL as your data source.
Look at Defining an SQL Command in CR's online help (F1).
If a command was used in the original report creation, it's a simple matter to go in and edit that SQL.
If the report was not originally built w/ a Command you may find it difficult to switch over. In most cases it easier to start over from scratch, creating a new, blank report, that uses the command.
Jason -
I've inherited many existing reports. They all access stored procedures in SQL Server 2000. As I've been trying to study them, I've noticed a major disconnect between the sproc referenced in Database Expert and the 'Show SQL Query' window. How can I sync these up? And how can I modify the sproc call that's referenced within the Show SQL Query? Using VS .Net, I've even looked at the underlying class file, and cannot find any reference to the actual sproc call.
Thanks.
DaveHi David,
Open the report in Crystal and go to Database | Set Datasournce Location. You will then be able to logon to your database and select the Stored Procedure you want. You will be prompted to set the parameters if there are any and chances are you will get a message saying the database has changed and asking if you want to update the report. Say yes to that and the report should be using the updated Stored Procedure now.
Unlike tables, Crystal is calling the Stored Procedure and executing it. This is why you can't see the code for the query and just the Call.
Good luck,
Brian -
It seems every portal user can use 'Show SQL Query Info' at application component manage page. How to disable it?
In case anyone is interested I found 2 methods to get round this problem:
1. First if you are calling the url directly you may need to convert some characters to their hexidecimal equivalent to make this be interpreted correctly by the browser.
i.e. Space = %20
% character = %25
& character = %26
So in the example I used this would become:
?p_arg_names=costcentre&p_arg_values=B15&p_arg_names=projsearch=%25Teach%25
Binding:
:cost_centre binding with B15
:projsearch binding with %Teach%
2. The second method is to use a pl/sql stored procedure to call the report passing the parameters in as follows.
PORTAL_CUST.P11_PROJECT_SEARCH_RESULTS.show (
p_arg_names => PORTAL.wwv_standard_util.string_to_table2 (
'parameter1:' ||
'parameter2'),
p_arg_values => PORTAL.wwv_standard_util.string_to_table2 (
p_parameter1_value || ':' ||
p_parameter2_value));
Cheers,
Gary. -
Show SQL Query to be showed in Text object at the report
Is there any way where I can take/copy the query showed in "Database->Show SQL Query" to be showed as a field in a TextBox inside the report.
So it is a bit clearer what I am trying to do, it is to get who, when and what runs that report.
Thanks in advance
TonioHi Toni,
I am not sure if I have understood your requirement. If you could elaborate what you are trying to do then i may be able to help.
I understand you want to copy the query which is displayed in DATABASE->Show query name... I hope u are refering to SQ01 trx...
I am not sure what next part..
Rgds
Abhijit -
What Option Allows Permanent Change of Query in the Show SQL Query Window?
I am trying to create a report in Crystal Reports v8.5 (or v10). I would like to create the report by simply cutting and pasting an SQL query from SQL Designer into the appropriate place in Crystal Reports. I can paste the query into the "Show SQL Query" window, but it reverts back to something else. What Option do I change to allow me to do that, i.e, change the query in the "Show SQL Query" window?
Hi Alan,
In CR10 there is no option to past SQL qurety in Show Sql command option. There is another option provided 'Add Commad' to execute customized SQL queries. After connecting to your datasource before selecting tables you can choose Add Command option and past your SQL queries.
Also you can modify the queries which you have pasted in add command.
Thanks,
Sastry -
Autotrace does not show SQL Query Results
In the previous versions of SQL Developer, the query results will be shown in the Results tab when running the SQL using Autotrace. However, in SQL Developer v2, I cannot find the query results when I run the SQL using Autotrace. Are there any options or settings to turn on the query results in autotrace?
Please do not duplicate threads (original Autotrace does not show Query Results only makes you and all of us lose time.
If nobody answered, that would probably indicate a NO.
You can request this at the SQL Developer Exchange again, so other users can vote and add weight for possible future implementation.
Sorry,
K. -
Show the SQL query on the report itself
I'd like to show the entire SQL query in print at the end of a report, say in the Report Footer section so that the user could review it let me know what edits are needed to meet their needs. Thanks
Since the query itself doesn't really change (except for parameter values passed to selection criteria), you can just open the Show SQL Query and paste it into a text box.
Beyond that, there isn't a way to add via a "Special Field".
HTH,
Jason -
How do I modify the WHERE clause in my SQL query?
This seems like such a straight-forward part of the report design, but I'm fairly new to Crystal Reports and I only have experience with modifying reports someone else has already written. In this particular case, I just need to modify the WHERE clause of the SQL query. I can select Show SQL Query and see what statement is being used to select data, but I can't find where to modify it since it's grayed out. I see how to change the selection criteria, parameters, grouping, etc...just not the WHERE clause. The report is linked to a database used for reporting with a table created and populated by a stored procedure. I don't need to modify the stored procedure because the data I want to filter by is currently in the table--I just don't know how to filter by what I need. Here's part of the query:
SELECT "rpt_dist"."startdate", "rpt_dist"."transtype", "rpt_dist"."laborcode", "rpt_dist"."crewid", "rpt_dist"."regularhrs" FROM "Reporting"."dbo"."rpt_dist" "rpt_dist"
WHERE (rpt_dist."transtype" <> 'WORK' AND rpt_dist."transtype" <> 'WMATL') AND rpt_dist."laborcode" LIKE 'S%' AND (rpt_dist."crewid" = 'HOUS' OR rpt_dist."crewid" = 'HOUS2' ...
I would like to add another crewid to the WHERE clause. Thanks for any input.1.Open the report in the crystal designer
2.Go to the field explorer(if hidden go to view menu->field explorer)
3.Rt. click on the database fields->choose database expert
4.Now you will see 2 columns-Available DataSource and Selected Tables
5.Rt. click on the object(ex.command) available in the Selected Tables column->Choose Edit command
6.A new Modify Command window will appear,here you can edit your SQL Query
I get to step 4 and I see the two columns including my database and the report table, but there is no command object available. If I right-click on my table, I can just view the Properties. ??
As for the other tip to modify the record selection: I don't see anywhere the other crewid values are set and if I add the one I'm missing, it doesn't modify the existing SQL Query and when I preview the report it throws off the results so that no data displays??
I'm using Crystal Reports 11.5 if that makes a difference. Thanks again. -
Crystal Reports 10 Datasource Location and SQL Query update
I am running Crystal Reports 10 accessing SQL Server 2008 database on Windows 7. Our product changed database names and I'm trying to update reports to point to the new database. Sounds nice and simple. The database has no structure changes yet, it's just a copy and rename of the old database. Both databases exist, same SQL instance, same permissions, etc. ...
Existing working report:
Has an ODBC (RDO) location to database DbVersion1
If I run Show SQL Query, the database name is in the query text (i.e. FROM DbVersion1.dbo.MyTable)
Attempted:
In Set Database Location popup, I created a new ODBC (RDO) connection to database DbVersion2
Updated Current Data Source for report to this new ODBC (RDO) connection.
Ran Verify Database. Popup stated "The database is up to date."
But when I run "Show SQL Query", is still shows DbVersion1 in the text, and the report displays data from DbVerison1. When I display the Datasource Location for the report, it shows DbVersion2 as I changed to above. How do I "refresh" the SQL Query to recognize the new Datasource Location?
Thanks,
GaryHi Gary,
A possible couple of issues, CR 10 doesn't support SQL Server 2008 and it doesn't support Windows 7. We had to update CR XI R2 SP 6 and above to make SQL 2008 work. MS changed the name of their client dll so CR is not aware of the new drivers.
MDAC native driver may work but not sure....
Try OLE DB, it may work better.
Thanks
Don -
Modify SQL query in Crystal Reports 2013
Bonjour,
Je voulais savoir s'il était possible de modifier la requête SQL dans Crystal Reports 2013, car les bases de données de notre application pour bibliothèque utilise un format de date particulier qu'il nous faut corriger directement dans la requête SQL.
Merci pour vos informations.
Cordialement
Claude Marcilly
Cannes - France
Hello,
I wanted to know if it was possible to modify the SQL query in Crystal Reports 2013. Databases of our application library indeed use a particular date format that we need to fix directly into the SQL query.
Thank you for your information.
Best regards
Claude Marcilly
Cannes - FranceHi Claude,
If you are creating reports using tables then go in Database menu and click on show SQL query, this will show the SQL generated by crystal reports. Now go in database expert and expend your connection and double click on Add Command and past the query which was generated by Crystal and try to modify the date format and click OK.
Now you need to redesign your reports based on Add command.
or
If your reports datasource is Add command you can directly go in add command and change it.
-Sastry -
Report data does not reflect the SQL Query?
Hi,
I have a report which does not seem to be processing all records returned from the database. When I run the SQL Query produced by crystal manually against the SQL Server all data is returned correctly in crystal not. Does this mean my links are not set up correctly in the Database Expert? or is there another issue, I use a Crystal Syntax selection formulae which is based on a couple of paramters to filter the database records.
Help is appreciated
K<p>I agree with Rahul on checking the record count on the report vs. the record count from the query. Conditional suppression and Group selection formula will hide records that are actually being returned.</p><p>It sounds like (from your question) that you are using the database linking expert in CR. You can also check the SQL that CR is sending by going to Database -> Show SQL Query... compare this with the query you are using for validation, this will give you some clues as to whether your linking structure has an issue. </p>
Maybe you are looking for
-
Remote for iPod does not work for MENU
I have just bought a 30GB iPod and the A/V connection Kit which includes a Remote. The menu function of the Remote has no effect on the iPod. One reply to such question stated, quote ... it does not work ... it is meant for the front row software. In
-
when I start up Firefox 4.0.Beta 8 and it goes to my home page and when I go to another web site it say on the tab saying connecting and don't stop. When I try to click on any links it don't work. The only way I can close the broswer it pressing the
-
how to add a facebook photo album to air app ?
-
I, have (5) eMacs, (2) 1 GHz, (1) 1.25GHz, and, (2) 1.42 GHz, Will, I be, able to purchase, A, single copy of, Leopard, to upgrade all my eMacs? I've, tried, to, find, the, answer, to, this, on my own, but to no avail. Any assistance, on this, would
-
So, I've been trying to export using the mpeg-2 60 minute high quality encode preset. The encoding appears to go off successfully in the batch monitor. However, the file that is exported appears as an unrecognizable file type. It appears just as a bl