Show-stopper Connecting web performance test to remote DB2 server as data source

Hi All,
We are running TFS2010 on VS2010 Ultimate on 2003 server SP-2 with IE 8 for web applications.
We are working on conducting load tests in web-service. Previously we did that using data source from MS SQL to connect our web performance tests. Now we have a new requirement: changing our
data source from MS SQL server to DB2 for good. The DB2 server is in a separate network. I am struggling how I can connect to the DB2 server. For the beginner the firewall setup is being taken care of with a separate initative. So I am a bit startled on how
to connect to DB2 server from Visual Studio. Any help would be highly appreciated.
Please let me know how we can accomplish this goal. Appreciate a lot.
Thank you,
Riz

Thanks for Javaman’s help.
Hi Riz,
Thank you for posting in the MSDN forum.
Actually the real issue in this thread is related to the DB2.
Since it is the third party software, sorry for that it is really out of support range of VS testing forum.
But you could post this issue to the following forum, there you would get better support for it.
https://www.ibm.com/developerworks/community/forums/html/category?id=33333333-0000-0000-0000-000000000019
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Can Web Performance Test work on AJAX or Javascript Project which will show only one URL for all the pages?

Hi there,
I'm working on testing a AJAX and JavaScript Project which has several pages but all in the same URL. I need to test some attribute on the page or parameter past by AJAX or Javascript. Can Web Performance Test work to get what I want?
Thanks,

Hello,
Thank you for your post.
Web performance test is used to test if a server responses correctly and the response is consistent with what we expected. And we test the response speed, the stability and scalability.
The Web Performance Test Recorder records both AJAX requests and requests that were submitted from JavaScript, but
web test does not execute JavaScript. I am afraid that you can’t use web test to test parameter past by AJAX or JavaScript.
Please see:
Web Performance Test Engine Overview
About JavaScript and ActiveX Controls in Web Performance Tests
From the first link, “Client-side scripting that sets parameter values or results in additional HTTP requests, such as AJAX, does affect the load on the server and might require you to manually modify the Web Performance Test to simulate the scripting.”
If you want to execute the function typically performed by script in web test, you need to accomplish it in coded web performance test or a web performance test plugin. Please see:
How to: Create a Coded Web Performance Test
How to: Create a Web Performance Test Plug-In
I am not sure what the ‘some attribute on the page’ is. If you mean that you want to test those controls on the page, you can do coded UI test, which can test that the user interface for an application functions correctly. The coded UI test performs actions
on the user interface controls for an application and verifies that the correct controls are displayed with the correct values. You can refer to this article for detailed information about code UI test:
Verifying Code by Using Coded User Interface Tests
Best regards,
Amanda Zhu [MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Using Test Setting file to run web performance tests in different environments

Hello,
I have a set of web performance tests that I want to be able to run in different environments.
Currently I have csv file containing the url of the load balancer of the particular environment I want to run the load test containing the web performance tests in, and to run it in a different environment I just edit this csv file.
Is it possible to use the test settings file to point the web performance tests at a particular environment?
I am using VSTS 2012 Ultimate.
Thanks

Instead of using the testsettings I suggest using the "Parameterize web servers" command (found via context menu on the web test, or via one of the icons). The left hand column then suggests context parameter names for the parameterised web server
URLs. It should be possible to use data source entries instead. You may need to wrap the data source accesses in doubled curly braces if editing via the "Parameterize web servers" window.
Regards
Adrian

ActiveX Control recording but not playing back in a VS 2012 Web Performance Test

I am testing an application that loads an Active X control for entering some login information. While recording, this control works fine and I am able to enter information and it is recorded. However on playback in the playback window it has the error "An
add-on for this website failed to run. Check the security settings in Internet Options for potential conflicts."
Window 7 OS 64 bit
IE 8 recorded on 32 bit version
I see no obvious security conflicts. This runs fine when navigating through manually and recording. It is only during playback where this error occurs.

Hi IndyJason,
Thank you for posting in MSDN forum.
As you said that you could not playback the Active X control successfully in web performance test. I know that the ActiveX controls in your Web application will fall into three categories, depending on how they work at the HTTP level.
Reference:
https://msdn.microsoft.com/en-us/library/ms404678%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396
I found that this confusion may be come from the browser preview in the Web test result viewer. The Web Performance Test Results Viewer does not allow script or ActiveX controls to run, because the Web performance test engine does not run the, and for security
reasons.
For more information, please you refer to this follwoing blog(Web Tests Can Succeed Even Though It Appears They Failed Part):
http://blogs.msdn.com/edglas/archive/2010/03/24/web-test-authoring-and-debugging-techniques-for-visual-studio-2010.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Web performance test using Ultimate VS2012 is possible?

Hello,
I worked on automation using VS2012 for different client who used .net. Now i am on different account who used Java and my goal is same to convert day to day functionality checked in automation. Any help?? how to start where to start???
Thanks in advance!
Hema.
HS

Hi SCRana,
Thank you for posting in MSDN forum.
According to your description, you mean that you want to set the breakpoint and debug the web performance test during using the recorder to record this web performance test, am I right?
As far as I know that there have no this feature of breakpoint/debugger in web performance test.
Generally, we set the breakpoint and debug this coded web performance test after we finished this web performance recording.
So if you still want to this feature, I suggest you could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio.
The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote. If you submit this suggestion, I hope you could post that link here, I will help you vote it.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Performance Issue with Webi report uses SAP BI Query as the data source

Hello.
I have created a Webi ad-hoc report which connects to a SAP BI query through BO OLAP universe.
The layout of Webi is the exactly the same as the BI query. There are filters in the Webi to restrict the number of data extraction, but even with data result of 5000 rows, it took about 30 seconds.
If I execute the BI query with the same filter restriction, it tooks less than 10 seconds.
It seems that large percentage of time is consumed at the MDX part.
Is there any tuning method that could speed up the process time of MDX?
Thank you.
Justine
Edited by: Justine Liu on Mar 18, 2009 6:59 AM

Hi,
please take a look here:
[https://service.sap.com/sap/support/notes/1142664] (Look under related notes)
It includes references to various performance improvements of the MDX interface. From what I saw there it is advisable to upgrade your SAP BI (7.0) up to at least Support Package 21 (you are currently on SP 15).
This may also be interesting for you: There is a new Fix Pack 1.4 coming out for BOBJ XI 3.1. Combined with the related SAP Enh.Pack (not sure about the version of this one) should also improve WebI performance. This fix pack is not yet officially released though but it should not take look.
I recommend that you try the upgrade to Support Package 21 first.
BTW it is also advisable to take a look in the results of your MDX query (e.g using the MDXTEST transaction). You should make sure that your query is indeed restricted as expected. Sometimes the results you see in SAP native reporting tools (e.g. BEx Analyzer) differ from those returned from the MDX component, depending on the way variables/restrictions where defined in the query designer. It is all about making sure that there is no apples/oranges comparison here.
Regards,
Stratos

Using InfoPath and the Web service GetUserProfileByName-An error occurred accessing a data source

Hi, Everyone,
I want to realize the function that when user fills out the infopath form the form can automatically get current users' name and I've searched that I can use the Web service GetUserProfileByName method. When I preview the form it is all right, however, when
I fill the form online, it occurs this error as folllowing. Anyone knows why and how to solve this problem?
Thanks forward!
Warning
An error occurred querying a data source.
Click OK to resume filling out the form. You may want to check your form data for errors.
Hide error details
An error occurred while trying to connect to a Web service.
An entry has been added to the Windows event log of the server.
Log ID:5566
Correlation ID:9c23d39c-18fa-1025-c7ec-600a1582a54a

Hi,
According to your post, my understanding is that you get error when using the Web service GetUserProfileByName in InfoPath.
Have the InfoPath form template call web service in code? If yes, please see following KB and check if it is the cause.
http://support.microsoft.com/kb/981684
You can also
follow the steps in the article to resolve this error in InfoPath. Please refer to:
Auto Populate User Information in InfoPath with Claims Based Authentication in SharePoint – Part 2 of 3
In addition, you need to disable the Loopback check.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/en-US/d6d20308-a5d0-45fa-881d-0626c68c4e73/infopath-an-entry-has-been-added-to-the-windows-event-log-of-the-server-logid-5566?forum=sharepointcustomizationprevious
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Performance issue with big CSV files as data source

Hi,
We are creating crystal reports for a large banking corporation with CSV files as data source. For some reports, we need join 2 csv files. The problem we met now is that when the 2 csv files are very large (both >200M), the performance is very bad and it takes an hour or so to refresh the data in Crystal Reports designer. The same case for either CR 11.5 or CR 2008.
And my question is, is there any way to improve performance in such situations? For example, can we create index on the csv files? If you have ever created reports connecting to CSV, your suggestions will be highly appreciated.
Thanks,
Ray

Certainly a reasonable concern...
The question at this point is, How are the reports going to be used and deployed once they are in production?
I'd look at it from that direction.
For example... They may be able to dump the data directly to another database on a separate server that would insulate the main enterprise server. This would allow the main server to run the necessary queries during off peak hours and would isolate any reporting activity to a "reporting database".
This would also keep the data secure and encrypted (it would continue to enjoy the security provided by an RDBMS). Text & csv files can be copied, emailed, altered & deleted by anyone who sees them. Placing them in encrypted .zip folders prevents them from being read by external applications.
<Hope you liked the sales pitch I wrote for you to give to the client... =^)
If all else fails and you're stuck using the csv files, at least see if they can get it all on one file. Joining the 2 files is killing you performance wise... More so than using 1 massive file.
Jason

Error -25596 when trying to connect to use the Informix Online Server native data source

Hi All,
We currently use a very old version on crystal (v9) and have recently downloaded the current version (14.1.1.1036) in order to investigate the effort involved in upgrading.
In the past we have always connected to our IBM Informix Server using the native Crystal Reports Informix Online Server data source, but all attempts with the current version of Crystal Reports are failing with error -25596.
The error is reported by Informix and it has this description:
-25596 The INFORMIXSERVER value is not listed in the sqlhosts file or the
Registry.
The default database server name that the INFORMIXSERVER environment
variable specifies must be a valid database server name in the file
$INFORMIXDIR/etc/sqlhosts on UNIX or the registry on Windows. Check
that the specified server is listed in the sqlhosts file or the
registry.
However, I'm of the opinion that the server is known and is configured OK (it's configured using the Informix SetNet32 application and it has resulted in this registry key being populated:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Informix\SqlHosts\prod1_devdb1 (NB: prod1_devdb1 is the name of the server I am trying to connect to).
I can create ODBC datasources on my PC and they work OK. I can also run our legacy VB6 application (using the Crystal 9 COM objects) and connect using the native drivers to the Informix database.
My PC is running 64 bit Windows 7 Enterprise (fully patched). Our Informix server is version 11.7 running on a SUSE server.
Any suggestions for where to start looking to solve this?

TIMESTAMP
THREAD_ID
FILENAME
LINE_NUMBER
LOGGED_DATA
LEVEL
2014-5-1-3-54-31
10828
..\cserrinf.cpp
523
Error 14722 (..\csdll.cpp, 117): : C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crw32_res_xx.dll
1
2014-5-1-3-54-51
10828
.\QESession.cpp
445
Set Product View Locale: 1033
20
2014-5-1-3-54-51
10828
.\QESession.cpp
479
Set Preferred View Locale: 3081
20
2014-5-1-3-54-51
10828
.\QESession.cpp
501
Set Process Locale: 3081
20
2014-5-1-3-54-51
10828
.\qecommon.cpp
117
This property is currently in a read-only state and cannot be modified. File Name: ".\QEProperty.cpp". Line: 217
1
2014-5-1-3-54-54
10828
.\xml.cpp
211
Leaving DbInitialize()
20
2014-5-1-3-54-54
10828
.\xml.cpp
153
In DbInitialize()
20
2014-5-1-3-54-54
10828
.\xml.cpp
211
Leaving DbInitialize()
20
2014-5-1-3-54-54
10828
.\xml.cpp
385
In DbFetchDatabaseType()
20
2014-5-1-3-54-54
10828
.\xml.cpp
399
Leaving DbFetchDatabaseType()
20
2014-5-1-3-54-54
10828
.\xml.cpp
4732
In DbFreeString()
20
2014-5-1-3-54-54
10828
.\xml.cpp
4735
Leaving DbFreeString()
20
2014-5-1-3-54-54
10828
.\jdbc.cpp
241
Leave DbInitialize()
20
2014-5-1-3-54-54
10828
.\jdbc.cpp
185
Enter DbInitialize()
20
2014-5-1-3-54-54
10828
.\jdbc.cpp
241
Leave DbInitialize()
20
2014-5-1-3-54-54
10828
.\jdbc.cpp
555
Enter DbFetchDatabaseType()
20
2014-5-1-3-54-54
10828
.\jdbc.cpp
564
Leave DbFetchDatabaseType()
20
2014-5-1-3-54-55
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-54-55
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-54-55
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-54-55
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
194
Leaving DbInitialize()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
148
In DbInitialize()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
194
Leaving DbInitialize()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
317
In DbFetchDatabaseType()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
326
Leaving DbFetchDatabaseType()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
1858
In DbFreeString()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
1861
Leaving DbFreeString()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-54-57
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-54-57
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-54-57
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-2
10828
.\crdb_wic.cpp
182
Leaving DbInitialize()
20
2014-5-1-3-55-2
10828
.\crdb_wic.cpp
127
Enter DbInitialize()
20
2014-5-1-3-55-2
10828
.\crdb_wic.cpp
182
Leaving DbInitialize()
20
2014-5-1-3-55-2
10828
.\crdb_wic.cpp
381
Enter DbFetchDatabaseType()
20
2014-5-1-3-55-2
10828
.\crdb_wic.cpp
397
Leave DbFetchDatabaseType()
20
2014-5-1-3-55-2
10828
.\crdb_wic.cpp
404
In DbFreeString()
20
2014-5-1-3-55-2
10828
.\crdb_wic.cpp
407
Leaving DbFreeString()
20
2014-5-1-3-55-9
10828
..\crdb_p2s.cpp
570
Entering SQLLogOnSQLServerWithExtendableOptions
20
2014-5-1-3-55-45
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-45
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-45
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-55-45
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-46
10828
..\crdb_p2s.cpp
577
Leaving SQLLogOnSQLServerWithExtendableOptions
20
2014-5-1-3-55-46
10828
..\serverhandle.cpp
356
succeeded: serverName=prod1_devdb1,databaseName=globalstar,userID=scottr
1
2014-5-1-3-55-46
10828
..\..\convert.cpp
864
Error: message=, DbError=202
1
2014-5-1-3-55-46
10828
..\cserrinf.cpp
523
Error 31816 (..\..\src\data\queryenghelp.cpp, 549): Logon failed.:
1
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\jdbc.cpp
173
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-53
10828
..\..\src\print\format\imageretriever.cpp
905
Destroy API called. Image Retriever was not used. No cleanup necessary.
20
2014-5-1-3-55-53
10828
.\xml.cpp
219
In DbTerminate()
20
2014-5-1-3-55-53
10828
.\xml.cpp
271
Leaving DbTerminate()
20
2014-5-1-3-55-53
10828
.\jdbc.cpp
250
Enter DbTerminate()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
203
In DbTerminate()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
252
Leaving DbTerminate()
20
2014-5-1-3-55-53
10828
.\crdb_wic.cpp
190
In DbTerminate()
20
2014-5-1-3-55-53
10828
.\crdb_wic.cpp
241
Leaving DbTerminate()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
203
In DbTerminate()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
252
Leaving DbTerminate()
20
2014-5-1-3-55-53
10828
.\crdb_wic.cpp
190
In DbTerminate()
20
2014-5-1-3-55-53
10828
.\crdb_wic.cpp
241
Leaving DbTerminate()
20
2014-5-1-3-55-53
10828
.\xml.cpp
219
In DbTerminate()
20
2014-5-1-3-55-53
10828
.\xml.cpp
271
Leaving DbTerminate()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
113
In DllMain()
20
2014-5-1-3-55-53
10828
.\javabeans.cpp
136
Leaving DllMain()
20
2014-5-1-3-55-53
10828
.\xml.cpp
112
Leaving DllMain()
20

Web Performance Test - Record the time of a page and name it after the page has returned.

We have a page that returns a random (as far as we are concerned) value . We need to be able to say how long it took the page when a specific value has appeared.
Here's an example:
Page.aspx can return either red, blue or green.
How do we get the timings for the times it returns red separate from the timings it returns blue etc?
I've tried the following:
1> PostTransaction web plugin - this only has read only fields for transaction name
2> RequestName - we can change this in the PostPage and PostRequest as it's not read only but this doesn't get reflected in the IDE.
3> Adding a fake transaction and then doing some wonderful SQL on the LoadTest2010 database afterwards, but this is a nasty solution and wouldn't display during run time. Not that displaying at run time is needed but the nastiness prevents this.
4> Writing to a file or DB, again a nasty solution, file would lead to locking or gathering masses of individual users files, would also lead to disk issues. DB would lock thread and is advised against in a webtest I believe.
Any ideas please?
Cheers,
Rob

Hi RobbiedCoUK,
Thanks for your friendly response.
>>You said you would find someone to help, have you not been able to?
Tina-Shi help you report this issue to the high-level support, we also didn't get the response now.
But if we get any latest information, we would share it here. Appreciate your patience again!
>>Adrian was just saying that he'd said the same as in my question. It wasn't a solution to the issue.
You are right, since other community members like Adrian still got the same issue as yours, if possible, you could submit a report for this issue, the senior members from the connect report can provide more professional support. Before
we get the response from the high-level support, I think it would be a better way for you to get the suggestion/solution for this issue directly from the connect report since it would be a real issue if other member still got the same issue as yours.
If you submit the report, please also share us the link here, so other members who get the same issue as yours would help you vote it, and we could get the latest information from the report members.
Sincerely,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

WCF service connection forcibly closed by the remote host for large data

Hello ,
                    WCF service is used to generate excel report , When the stored procedure returns large data around 30,000 records. Service fails
to return the data . Below is the mentioned erorr log :
System.ServiceModel.CommunicationException: An error occurred while receiving the HTTP
response to <service url> This could be due to the service
endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by
the server (possibly due to the service shutting down). See server logs for more details. ---> System.Net.WebException:
The underlying connection was closed: An unexpected error occurred on a receive. ---> System.IO.IOException:
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
   at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)
   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   --- End of inner exception stack trace ---
   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetResponse()
   at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout).
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
   at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
   at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at IDataSetService.GetMastersData(Int32 tableID, String userID, String action, Int32 maxRecordLimit, Auditor& audit, DataSet& resultSet, Object[] FieldValues)
   at SPARC.UI.Web.Entities.Reports.Framework.Presenters.MasterPresenter.GetDataSet(Int32 masterID, Object[] procParams, Auditor& audit, Int32 maxRecordLimit).
WEB CONFIG SETTINGS OF SERVICE
<httpRuntime maxRequestLength="2147483647" executionTimeout="360"/>
<binding name="BasicHttpBinding_Common" closeTimeout="10:00:00" openTimeout="10:00:00"
       receiveTimeout="10:00:00" sendTimeout="10:00:00" allowCookies="false"
       bypassProxyOnLocal="false" hostNameComparisonMode="StrongWildcard"
       maxBufferSize="2147483647" maxBufferPoolSize="0" maxReceivedMessageSize="2147483647"
       messageEncoding="Text" textEncoding="utf-8"   transferMode="Buffered"
       useDefaultWebProxy="true">
<readerQuotas     maxDepth="2147483647"
      maxStringContentLength="2147483647"  maxArrayLength="2147483647"
      maxBytesPerRead="2147483647"  maxNameTableCharCount="2147483647" />
     <security mode="None">
WEB CONFIG SETTINGS OF CLIENT
<httpRuntime maxRequestLength="2147483647" requestValidationMode="2.0"/>
<binding name="BasicHttpBinding_Common"
       closeTimeout="10:00:00"       openTimeout="10:00:00"
       receiveTimeout="10:00:00"       sendTimeout="10:00:00"
        allowCookies="false"        bypassProxyOnLocal="false"
        hostNameComparisonMode="StrongWildcard"        maxBufferSize="2147483647"
        maxBufferPoolSize="2147483647"        maxReceivedMessageSize="2147483647"
        messageEncoding="Text"        textEncoding="utf-8"
        transferMode="Buffered"        useDefaultWebProxy="true">
<readerQuotas
       maxDepth="2147483647"
       maxStringContentLength="2147483647"
       maxArrayLength="2147483647"
       maxBytesPerRead="2147483647"
       maxNameTableCharCount="2147483647" />

Doing binding configuration on a WCF service to override the default settings is not done the sameway it would be done on the client-side config file.
A custom bindng must be used on the WCF service-side config to override the defualt binding settings on the WCF service-side.
http://robbincremers.me/2012/01/01/wcf-custom-binding-by-configuration-and-by-binding-standardbindingelement-and-standardbindingcollectionelement/
Thee readerQuotas and everything else must be given in the Custom Bindings to override any default setttings on the WCF service side.
Also, you are posting to the wrong forum.
http://social.msdn.microsoft.com/Forums/vstudio/en-us/home?forum=wcf

HOW TO CONNECT FROM CLIENT MACHINE TO REMOTE MACHINE(SERVER DATABASE MACHINE)

Hi friends.
I need your valuable help,
I am using oracle 11g database.
I have two system.One is client machine and installed oracle 11G client software.
and from this machine user can connect remote server database(This is old remote system, this is just for Information).
And i have created one new database called RMANP in new remote server machine (this is the machine, in which i need to connect from client machine)
ex
CLIENT MACHINE DETAIL IS:
system66
ip address is 192.162.21.66
REMOTE SEVER MACHINE DETAILS IS:
system56
ip address is 192.162.21.56.
and i add entry on client machine tnsname.ora file like following,
RMANP=
(DESCRIPTION=
   (ADDRESS=
     (PROTOCOL=TCP)
     (HOST=192.168.21.56)
     (PORT=1521)
   (CONNECT_DATA=
     (SERVICE_NAME=rmanp)
But when i try to connect to remote server from client machine in sqlplus, i am getting an error, Like following,
SQL> CONN SYS/SYSPW AS SYSDBA;
ERROR:
ORA-12560: TNS:protocol adapter error

2684285 wrote:
Hi friends.
I need your valuable help,
I am using oracle 11g database.
I have two system.One is client machine and installed oracle 11G client software.
and from this machine user can connect remote server database(This is old remote system, this is just for Information).
And i have created one new database called RMANP in new remote server machine (this is the machine, in which i need to connect from client machine)
ex
CLIENT MACHINE DETAIL IS:
system66
ip address is 192.162.21.66
REMOTE SEVER MACHINE DETAILS IS:
system56
ip address is 192.162.21.56.
and i add entry on client machine tnsname.ora file like following,
RMANP=
(DESCRIPTION=
   (ADDRESS=
     (PROTOCOL=TCP)
     (HOST=192.168.21.56)
     (PORT=1521)
   (CONNECT_DATA=
     (SERVICE_NAME=rmanp)
But when i try to connect to remote server from client machine in sqlplus, i am getting an error, Like following,
SQL> CONN SYS/SYSPW AS SYSDBA;
ERROR:
ORA-12560: TNS:protocol adapter error
There is nothing in your connect string to tell sqlplus which database you want to connect to. Therefore it assumes (by default) that you want to connect to a *local* database whose name is identified by the value of the environment variable ORACLE_SID. And there is no such database, so he gets the reported error trying to establish a connection to a non-existent local service.
You need to specify your target database, thusly:
SQL> conn sys/syspw@rmanp as sysdba
BTW, connecting to a remote database as sysdba is considered by most DBAs to be a big secruity breach. If you really need sysdba privileges (rare) you should be logged on to the database server machine with proper OS credentials, and work from there.
Also, TYPING IN ALL CAPS IS PERCEIVED AS SHOUTING.

Show smb connections in finder - to folder not root server/folder

Anytime I connect to a SMB share in finder it shows the server in the sidebar under "Shared" . I then have to traverse through the folders to find my actual folder.
Is there any way I can "map" a SMB share in finder so it connects to the proper destination folder instead of the root server/folder.

Try something like this.
Finder > Go > Connect to Server…, then enter
smb://<workgroup>;<user>:<password>@<computer_name>/<share>/<path_to_desired_fol der>
Once connected and the desired folder opened, you can do the usual stuff -- put it in sidebar, add to favourites, make an alias, etc.

Web Analysis : populate the same table with multiple data sources

Hi folks,
I would like to know if it is possible to populate a table with multiple data sources.
For instance, I'd like to create a table with 3 columns : Entity, Customer and AvgCostPerCust.
Entity and Customer come from one Essbase, AvgCostPerCust comes from HFM.
The objective is to get a calculated member which is Customer * AvgCostPerCust.
Any ideas ?
Once again, thanks for your help.

I would like to have the following output:
File 1 - Store 2 - Query A + Store 2 - Query B
File 2 - Store 4 - Query A + Store 4 - Query B
File 3 - Store 5 - Query A + Store 5 - Query B
the bursting level should be give at
File 1 - Store 2 - Query A + Store 2 - Query B
so the tag in the xml has to be split by common to these three rows.
since the data is coming from the diff query, and the data is not going to be under single tag.
you cannot burst it using concatenated data source.
But you can do it, using the datatemplate, and link the query and get the data for each file under a single query,
select distinct store_name from all-stores
select * from query1 where store name = :store_name === 1st query
select * from query2 where store name = :store_name === 2nd query
define the datastructure the way you wanted,
the xml will contain something like this
<stores>
<store> </store> - for store 2
<store> </store> - for store 3
<store> </store> - for store 4
<store> </store> - for store 5
<stores>
now you can burst it at store level.

Deploying ADF Application to remote Weblogic server

Hi Everyone,
I created an ADF Application 11.1.1.2 and deployed it successfully to the remote weblogic server 10.3.3 in same instance.
I want to know can we create ADF application in one instance and deploy it in remote weblogic server creating Data Source for different instance?
Let me put it in differently.
I created ADF Application using test instance and now i want to move it to PROD but i dont have access to PROD Database but i can make the DBA's run the database scripts in PROD that are needed for the application to run successfully ,is there away so that i can create application using test instance and create DataSource in weblogic server giving PROD database details ?
Is there a way i can give DBA's access to enter the database connection details for my application like changing any file in ADF Application like Model.jpx?
Please provide me with solutions?
Thanks.

Your application should be using a WebLogic DataSource - then you can define that datasource on any server you want pointing to any database you need.
Info here:
http://download.oracle.com/docs/cd/E17904_01/web.1111/b31974/bcservices.htm#CHDJDBJB

Show-stopper Connecting web performance test to remote DB2 server as data source

Similar Messages

Maybe you are looking for