Showing a field depending upon selection
Hi,
I have created a executable type program. The generated screen has two radio buttons and a push button.
Depending upon the radio button selected(push button need not be clicked) i want to display a input field.
How can we achieve this?
Thanks & Regards,
Vijith
REPORT zrsdvsr1
LINE-SIZE 220
LINE-COUNT 65(5).
TYPE-POOLS : slis.
TABLES
TABLES: vbak.
DATA DECLARATIONS
Ranges
RANGES: r_posnr FOR vbap-posnr.
DATA: BEGIN OF t_veramt OCCURS 0,
vbeln TYPE vbap-vbeln,
posnr TYPE vbap-posnr,
matnr TYPE vbap-matnr,
netwr TYPE vbap-netwr,
mwsbp TYPE vbap-mwsbp,
END OF t_veramt.
DATA: BEGIN OF t_disamt OCCURS 0,
vbeln TYPE vbap-vbeln,
posnr TYPE vbap-posnr,
matnr TYPE vbap-matnr,
netwr TYPE vbap-netwr,
mwsbp TYPE vbap-mwsbp,
netwr_v TYPE vbap-netwr,
mwsbp_v TYPE vbap-mwsbp,
disc_val TYPE vbap-mwsbp,
END OF t_disamt.
*& ALV FIELDS
DATA : alv_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
alv_layout TYPE slis_layout_alv.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_ver RADIOBUTTON GROUP g1 USER-COMMAND rad DEFAULT 'X',
p_sab RADIOBUTTON GROUP g1 .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln NO INTERVALS MODIF ID gr1.
PARAMETERS: p_dwfile TYPE rlgrap-filename
DEFAULT 'C:\test1.txt' MODIF ID gr2, "#EC NOTEXT
p_upfile TYPE rlgrap-filename
DEFAULT 'C:\test.txt' MODIF ID gr3. "#EC NOTEXT
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_upfile.
**************F4 Help For Input File Name****************************
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'C:\'
IMPORTING
file_name = p_upfile.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dwfile.
**************F4 Help For Input File Name****************************
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
field_name = 'C:\'
IMPORTING
file_name = p_dwfile.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_sab = 'X'.
IF screen-group1 = 'GR1' OR screen-group1 = 'GR2'.
screen-active = '0'.
screen-invisible = '1'.
ELSE.
screen-active = '1'.
screen-invisible = '0'.
ENDIF.
MODIFY SCREEN.
ELSE.
IF screen-group1 = 'GR3'.
screen-active = '0'.
screen-invisible = '1'.
ELSE.
screen-active = '1'.
screen-invisible = '0'.
ENDIF.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
START-OF-SELECTION
START-OF-SELECTION.
Check Radio Button
IF p_ver = 'X'.
PERFORM get_details_open_so_vertex.
ELSE.
PERFORM get_details_open_so.
ENDIF.
Display the output.
PERFORM diplay_report .
regards
vinod
Similar Messages
-
Auto-fill calender date and validate other fields depending upon selected date for infopath forms
I have a calender box in infopath form which i want to autoselect when user opens the form..Ex..i am opening form on 14th march the calender should show as 19th march and also i have to perform few validation and action such as if i am selecting date with
more than 5 days gap should open other field which is a dropdown..How can i perform this..Do you have Excel Services? if so, this article may be of use to you:
http://sergioblogs.blog.co.uk/2013/01/08/infopath-2010-and-excel-services-in-sharepoint-15407321/
You can configure an excel workbook to validate if a date is a working day and then use formulas to workout the working date for 5 days after the date you enter, then link your InfoPath form to connect to the excel workbook and return the result of your
calculation.
Regards
Sergio Giusti
http://sergioblogs.blog.co.uk/
Whenever you see a reply and if you think is helpful, click " Vote As Helpful". And whenever you see a reply being an answer to the question of the thread, click "
Mark As Answer". -
Build dynamic query depending upon selection of table and columns
Hi ,
I want your views on following requirement :
we r doing generic export to excel functionality .
1.User will select multiple tables and according to tables ,columns on that table will select
2.There can be multiple table
3.depending upon column and table selection , we have to build dynamic query and execute .
Please let me know is it possible .If yes then please tell me how to do above requirement.
Thanks in advanceHi,
Identifiers cannot be used as bind variables, query are parsed
before evaluate bind variables. Identifiers like table name.
For excel you can use some like this:
SET MARKUP HTML ON ENTMAP ON SPOOL ON PREFORMAT OFF
SPOOL test_xls.xls
SELECT colum1||chr(9)||columN FROM tableName;
or CSV:
SELECT colum1|| ',' ||columN FROM tableName;
SPOOL OFF
SET MARKUP HTML OFF ENTMAP OFF SPOOL OFF PREFORMAT ON
For construct the query i suggest to read "Dynamic SQL Statements":
http://www.java2s.com/Tutorial/Oracle/0440__PL-SQL-Statements/0300__Dynamic-SQL.htm
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/dynamic.htm
http://docs.oracle.com/cd/B10500_01/appdev.920/a96590/adg09dyn.htm
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:227413938857
--sgc -
Show/hide Section depending upon a field Value
Post Author: breathshadow
CA Forum: Formula
Hi I am not very good at Crystal Reports.Basically this is what i have to do.in the Details Records if i find Certain Text in a Field,I have to show a section or else..Hide it.here's the formula I useWhilePrintingRecordsglobal showDisbCreditSection as numberselect case UpperCase({INVOICE_LOG.LINE_ITEM_TYPE})case "HCDC", "LIDC", "SLDC", "RHCDC" showDisbCreditSection = 1 'set it to 1 as we found a record which contains one of these 4 Itemscase elseif (showDisbCreditSection <> 1 ) thenshowDisbCreditSection = 0end ifend selectformula = showDisbCreditSectionthis works ok if the User will Request 1 Report a Time. If they request the Report say in a "Between" Queryie, FieldX between 1 to 10the Formula Falls over.please show me some techniq to reset the showDisbCreditSection variable each time a new Report is Started in a continuous Report generated with a Between Query from Select Expert of CR 8.5thanksDeepakHi,
Declare a flag value is false at starting when your condition occur make that value as true. In if condition mention if flag = true skip that line(out side the loop).
Use flag logic.
Thanks,
RamuV -
Want to select sysdate into an input field depending
I want to select database date into an input field depending upon the value of a selectonechoice list.I am using an adf table.
User,
I recommend you have a look at [url http://thepeninsulasedge.com/frank_nimphius/2008/04/08/the-problem-of-the-lost-usecase-when-asking-questions-of-a-forum/]this, and then come back to provide more information. Your post raises so many questions in my mind because of the lack of information. Just a "for example," what does a selectOneChoice have to do with SYSDATE?
Kind regards,
John -
Conditions in SQVI for amount depending upon the Debitcredit Indicator
Hello ABAP's
I am new to this forum & learning. I am using SQVI for getting Information from Table BSEG. The data is getting extracted but I am unable to give any conditions for amount depending upon the Debitcredit Indicator. If it is "H" ie. Credit the Amount should change colour and if it is "S" it should be as it is.Just like in tcode MB51 when we get negative amount the Line is dispalyed in Pink and in case of Positive in Green.
Looking forward to your help.
With regards
SandyHi Sandesh,
You can not manipulate data in SQVI. For that you can write a query in infostructures transaction SQ01/02/03.
1. Go in SQ02, create an infoset and assign it to user-group available.
2. Inside infoset, declare table BSEG and click on button 'Extras'. here, you can write your code to multply by '-1' to a field depending upon some condition. Select 'Code' tab and code section as 'Record Processing'. Write code in window displayed.
3. In SQ01, select infoset you just created and select the query.
Execute the same and you will get required output.
Let me know if it helps.
Gouri. -
Show/hide fields when selecting an option from a drop-down menu.
Hello Gurus!
I have a question about creating a Java Script withing Acrobat pro. This is what i would like to do: I created a drop-down menu with several selection entries. Upon the customer making one of the selection entries, i would like for the correct fields that i created to become visible and all other fields to hide. Is this even possible to do? The reasoning behind this is because we have a form that customers have to generate in order to request access to certain financial accounts; we have over 20 different types of accounts and for each instance the customer has to fill out the same form. By creating a drop down menu, i can use the same form by just changing the drop-down selection and clicking on the designated fields for that selection. At this time i have over 20 different forms that poing to 20 different account requests and i would hate to send the form 20 different times to one person. The reason i can not add all fields desired for all accounts is due to the fact that the form would be filled with hundreds of checkmarks and instructions thus making the process too tideous for the customer. Hope you guys can help out.
~VaderThe good news is, it can be done (and it has been done).
There are a few things to be aware of, however.
The most important is that the form must be planned well, which means that you must think carefully about your logic and even more so about your field naming (hierarchical field names are your friend). One fundamental issue, you have to be aware of, is that this form no longer will be a "standard form". The consequence of this is that you may have to be aware that you might get into trouble when you have to prove that your user filled out that particular standard form (talk to your compliance and forms management people about that).
You also may have to decide whether the form should be usable in Reader. And, if so, how much you want to spend on the right to do so. You will see below why…
There are actually two approaches for dynamically showing/hiding parts of a form. If your form can be separated between a fixed first page (where you also have the account type selection), and a variable part (depending on the selection), you could use Templates, which you spawn according to the selection, and delete pages when you change the selection. This approach is very easy to implement, but requires Reader Extensions Server to allow it to work in Reader; Acrobat Pro's extended rights are not sufficient for that.
The other approach is showing/hiding fields. If you did your homework well, it would be very easy to first hide all subsequent fields, and then show the ones you need in two lines of code. This approach does not require extended rights for Reader at all, as long as your forms will always have the same number of pages, for each of your account types. This approach also works for the cases where the differences between the individual forms are very small. It does also work for showing/hiding bigger chunks of the form. In that case, you might create the "background" separately, and then put it as an icon into a button field which you will show/hide together with the carefully placed on top of it active fill-out fields.
There is a third possibility, which Adobe Propaganda probably would suggest, and that woudl be subforms in LiveCycle Designer. The consequence is, however, that you won't have PDF forms, but proprietary XFA forms instead. And you may have more developing and maintenance work than with the other approaches.
Back to your original question: you could use a Keystroke script evaluating event.changeEx of the combo box field. Depending on that, you would run your action to set up the according form part. The other way to do it would be evaluating event.value in the onBlur event. The latter would have the advantage that the selection has been made, and you get a bit more time to set up the form (this may in fact be an issue, particularly with Acrobat 9 and 10, which may take their time to show/hide fields).
Another possibility instead of a drop down (combo box field) would be a popup, where you would have a button to press, and the list of selections pops up. This second method uses app.popUpMenuEx().
Hope this can help.
Max Wyss. -
Can we hide column in a query depending upon the variable selected
Hi all,
let us say my report have 10 column.
now i am giving user option to select the values (let us say 'a' or 'b')
columns must be displayed depending upon the value selected by user ..
for example if user has selected 'a' then first five columns should be displayed..and if user has selected 'b' last five column should be displayed..(it will be OK even if we can hide the columns depending upon the selection )
Is it possible in BEx...please let me knowI did it sometime back. A bit complicated process.
Create an infoobject, manually enter the values "keyfig1" and "keyfig2".
Include this infoobject in the filters and restrict it using a "ready for input" variable.
Now create two formula variables.
Write a customer exit such that when you select "keyfig1", first formula variable's value should be set to 1 and other one's to 0.
Then in the query create two calculated key figures, multiply both with the formula variable. Also supress column (all active value == 0).
Then it will show the key figure which you have selected.
Pravender -
How to create some columns dynamically in the report designer depending upon the input selection
Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
ThanksHi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu -
Automatically update text field depending on the in select list value
I have got 2 tables. Table A (Employee Personal Detail), Table B (Employee Academic detail). Employee no is common field between two tables).
I have created interactive report with form on table b using in-built templates. I have added text box on form to display employee name which is stored in table A. I want to automatically display employee name depending upon value in employee no field on form. I know I can write query to get value in employee name field. It gives me error when employee no is blank. How to handle error?Sagar,
For the employee name value to change according to the emp_no, your page needs to get submitted. can you use a select list with submit for emp_no? And then use the PL/SQL mentioned above to run on page submit?
I'm not sure but I guess you can also achieve this in Ajax. May be someone expert in that could help. -
Hello everyone!
I am newbie to LabVIEW with some previous experience programming in different languages.
My goal is to build the application that upon my selection needs to give specific values from previously filled and prepared file.
For example, I have different types of operations (milling, drilling, turning..) and different grades (type) of steels (Uddeholm steel grades: NIMAX, IMPAX...and about 40 of them). For every operation there are different input data (Coated insert, uncoated). Based of those information application should give out cutting speed and feed rate data that are stored in some file. I understand I can do it in Excel spreadsheet or LV spreadsheet, I would prefer LV because of portability to systems without Office installed on them. I also understand that all those issues concerning input data for output results I can easily solve with case scenario.
Main issue is decision between different types of files that I can easily address like 2D matrix to get required data, which and how to do it.
I would like to know what I should acknowledge first before doing any further work?
And does someone have some simply prepared VI on which I can work my way on?
If you are willing to help me with guides I would be happy to answer any of your questions.
Vedran GaletaThank you very much for your reply.
This application that I am working on is completely static due to communication. It simply needs to provide entry in table depending on selected inputs in front panel, and of course display it front panel. I know what I need to do, as well as the structure. Only thing that I don't know yet how to do it in LabVIEW.
When I mentioned "LV spreadsheet" I meant on read from file option, you got that right.. The thing is that now I have large amounts (not large in acquisition data point of view, 5 spread sheets, with 45 rows and 15 columns) of data saved in Excell, and my goal would be to get that data in LabVIEW application, for the ease of access. And still leave that xls file as is, due to all connections that he have with smaller xls files. So in compact version of the story I am going to use save as comma separated (or tab, that depends of course) values from Excell with or without extra editing of created file in order to load that file into prepared program structure in LabVIEW. After I manage to do that, of course I will work my way for all other extras that I am gonna put eventually in program structure. So this would be like a backbone, I know it sounds simple. As a matter of fact I would probably be finnished allready in VB but highest demand is to do this in LabVIEW, and I am fully down with that.
Regards,
Vedran -
Hi,
I am customizing the bug workitem workflow.
I want ot select different lists, from the gllobal list, for fields basd upon user group
I am aware that I can use "when" clauses in the allowed/suggested values of the field.
My question is : how do I get the group(s) that the current user is in and how do use this to select different lists?Hi!
You can not do this through standard way. You must to create the custom work item control:
http://witcustomcontrols.codeplex.com/
And get the user group through IIdentityManagementService.
IIdentityManagementService IdentityService = _workItem.Store.TeamProjectCollection.GetService<IIdentityManagementService>();
TeamFoundationIdentity _curid = null;
_workItem.Store.TeamProjectCollection.GetAuthenticatedIdentity(out _curid);
string _group = "Admin";
var _gr = IdentityService.ReadIdentity(IdentitySearchFactor.AccountName, _group, MembershipQuery.Direct, ReadIdentityOptions.None);
if (_gr.Members.Where(s => s.Identifier == _curid.Descriptor.Identifier).Count() > 0) return true; -
Show or Hide fields based upon a variable value
Hi,
I am a rookie in the field of Acrobat. And my only question is :
How to Circle a Form Field based upon a variable value .
For example, If x=1, I want to circle Japan and if x=0, I want to leave it without any change.
Please help me out. Thanks for your time and help.
Thanks,
Vijayvijay77.Hi George,
I am pre-populating a Pdf file based upon the data submitted by the user. And I have to circle options selected in the form.
I am writing coldfusion code to flatten, populate the form into a PDF form. The end result is the PDF generation with all the data in it.
The data comes from the database, where I set variable values if any is selected or not.
Thanks for your reply, I really appreciate your help.
Vijayvijay77. -
Problem in populating 2nd combo box depending upon the selection of 1st
Hi all,
I have 2 combo boxes on my jsp page ,say continent and country . obviously the data in 2nd box is dependant on selection made in the 1st . I'm using MySQL with tomcat 5.0.7 . and JSP.
The first combo box in one form and the 2nd in another. After submitting first i 'm populating the second combo also.
But the problem is after submitting the first form the page gets refreshing and i can't see the selected continent in the first combo box.
The javascript code used follows:
function callCapture(form)
var item = continent.cmbContinent.selectedIndex;
document.country.hidContId.value=continent.cmbContinent.options[item].value;
document.continent.action="country.jsp?hidContId="+document.country.hidContId.value+"&buttName="+document.country.buttName.value+"";
document.continent.target="_self";
document.continent.submit();
some one pls help me asap !Hi Reegz,
that's what i'm also doing and i'm successfull till populating the second combo box but how do I keep the previous inputs on the page and reload the page based on the change of a selection box?
Is their any mistake in the javascript code:
Here is the code:
function callCapture(form)
var item = continent.cmbContinent.selectedIndex;
document.country.hidContId.value=continent.cmbContinent.options[item].value;
document.continent.action="country.jsp?hidContId="+document.country.hidContId.value+"&buttName="+document.country.buttName.value+"";
document.continent.target="_self";
document.continent.submit();
Pls help me... -
How to change the text of a user defined field in dynamic selections?
Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
Found an OSS note - 86980 - that tells that this is not possible.
But when we read the documentation on the user field (CJI3 - dynamic selections - double click on user field - F1), it shows the following text:
User-defined field in which you can enter general information with a length of up to 20 characters.
Dependencies
The names (key words) for user-defined fields depend on the field key.
Now the question is where to change the field key..
Thanks,
VenMadhu - you did not get the question I think.
Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
Thanks,
Maybe you are looking for
-
Opening nikon d7000 raw files in pse8
I have downloades camera raw 6 plug in but I am still getting the wrong file type error when I try to open my nikon d7000 raw files in elements 8. any suggestions??
-
when i go to open youtube at that time my computer says upgread the modern browser .i am using windows xp how can i get moder browser? == URL of affected sites == http://youtube == User Agent == Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trid
-
Hi, Let me know how to take a reprint on posted GRN. (same as previous copy), Tks in adv.
-
Can my iPad mini be changed in Germany?
IS it possible to change my iPad mini in germany? the screen is broken. The device has been bought in usa and is sim compatible.
-
Hi, May I maintain hierarchy between two different infoobjects?For example,the two infoobjects are student name and year.the value of student name are Zhangsan and Lisi,the value of year are 2008,2009.The final result is like below: zhangsan 2008