Showing BPM attributes in UWL custom columns.

Hi All,
Need help in a query, we have to show BPM attributes in SAP Portal UWL custom columns. We could get information on adding new Custom column in UWL iView but did not find any documentation on how to map the BPM attributes to the UWL custom column.
Versions Consumer SAP Portal : 7.3 SP 9
Producer BPM Portal : 7.31 SP 8
Will be of great help if someone can give us a solution.
Regards,
Sai Sharan Kalla

if i am not wrong, it is not possible with uwl.
you can do it with bpm inbox.

Similar Messages

Showing navigation attributes in the same column of a query

Hi,
I would like to know if there is a way to define a query such that TWO navigation attributes that reference the same underlying characteristic can be displayed in the SAME column rather than TWO separate columns.
I will describe an example scenario to clarify the requirement. We are using a BI Content InfoCube (0COOM_C02) that has the navigation attributes 0COSTCENTER__0PROFIT_CTR and 0WBS_ELEMT__PROFIT_CTR activated. Both of these attributes reference the characteristic 0PROFIT_CTR. The InfoCube contains transaction data for Cost Centres and WBS Elements.
The requirement is to define a query that summarizes the data by profit centre. At the moment, in order to combine Cost Centre and WBS (Project) data in the same query by Profit Centre, both navigation attributes need to be selected, resulting in the following output:
0COSTCENTER__0PROFIT_CTR......0WBS_ELEMT__PROFIT_CTR......AMOUNT
PC01...............................................Not assigned...................................10,000
PC02...............................................Not assigned...................................20,000
PC03...............................................Not assigned...................................12,000
PC04...............................................Not assigned....................................2,000
Not Assigned....................................PC02..............................................5,000
Not Assigned....................................PC03..............................................8,000
Not Assigned....................................PC05..............................................30,000
Not Assigned....................................PC06..............................................50,000
However, the desired result is to display only one profit centre column using the two profit centre navigation attributes as shown below:
PROFIT CENTRE......AMOUNT
PC01..........................10,000
PC02..........................25,000
PC03..........................20,000
PC04............................2,000
PC05..........................30,000
PC06..........................50,000
Is there a way to achieve the above result using the two navigation attributes only, without having to add 0PROFIT_CTR as a characteristic to the InfoCube?
Any suggestions would be appreciated.
Thanks,
Mustafa.

Hi Mustafa,
You have to use enhancement RSR00001 in the transaction CMOD to start developing your code.
For more information how the customer exit variables are processed, refer to the documentation:
http://help.sap.com/saphelp_nw70/helpdata/EN/f1/0a56f5e09411d2acb90000e829fbfe/frameset.htm
A short example can be found here:
http://help.sap.com/saphelp_nw70/helpdata/EN/1d/ca10d858c2e949ba4a152c44f8128a/frameset.htm
This should help.
Regards,
Daniel

How to make the display of custom column names in UWL(not bother abt values

Hi all
i want to make the display of custom column names in UWL ( for example GP)
i dont want or not looking about values for those custom columns . i know that thru custom connector we can achieve to retrieve the values for those custom columns. but currently i am looking only just to display the custom column names( for example GP custom column names, just i want to display the name of the columns ) in UWL .
Thanks
Sunil

Hello Prashant,
You can add the control to your custom pagelayout, the following article has an example:
http://spandps.com/2012/02/22/showing-the-audience-target-field-in-an-editmodepanel-sharepoint-sp2010-in-projectserver-ps2010/
Btw, the SPFieldTargetToControl has a required property:
http://msdn.microsoft.com/en-us/library/microsoft.office.server.webcontrols.fieldtypes.spfieldtargettocontrol.required(v=office.14).aspx
- Dennis | Netherlands | Blog |
Twitter

Custom Attributes in UWL - No data

Hello,
I am trying to add custom attributes Vendor and Currency to my UWL iview.
I have defined custom attributes in my Item Type as follows:
[code]<ItemType name="uwl.task.webflow.decision.TS92900044.SAP_EAQ" connector="WebFlowConnector" defaultView="InvoiceApprovalView" defaultAction="launchImage" executionMode="default">
 <ItemTypeCriteria systemId="SAP_EAQ" externalType="TS92900044" connector="WebFlowConnector"/>
 <CustomAttributes>
<CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebFlowContainer" cacheValidity="default">
 <Attribute name="Currency" type="string" displayName="Currency"/>
 <Attribute name="Vendor" type="string" displayName="Vendor"/>
 </CustomAttributeSource>
</ItemType>
I have also defined the display attributes in my View as follows:
<Views>
 <View name="InvoiceApprovalView"
 selectionMode="SINGLESELECT"
 width="98%"
 supportedItemTypes="uwl.task"
 columnOrder="subject, Vendor, Currency"
 sortby="priority:desc, dueDate:asc, createdDate:desc"
 tableDesign="ALTERNATING"
 visibleRowCount="10"
 headerVisible="yes"
 queryRange="undefined"
 tableNavigationFooterVisible="yes"
 tableNavigationType="CUSTOMNAV"
 actionRef="" refresh="300"
 dueDateSevere="86400000"
 dueDateWarning="259200000"
 emphasizedItems="new"
 displayOnlyDefinedAttributes="yes"
 dynamicCreationAllowed="yes"
 actionPosition="both">
 <Descriptions default="Invoice Summary"/>
<DisplayAttribute name="Vendor" type="string" width="30" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
 <Descriptions default="Vendor"/>
 </DisplayAttribute>
<DisplayAttribute name="Currency" type="string" width="30" sortable="yes" format="default" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes">
 <Descriptions default="Currency"/>
 </DisplayAttribute>
I have checked the task TS92900044 in the backend from Tcode PFTC and this task has the attributes Vendor, Currency in its container
PROBLEM: The columns appear but without any data.
Any pointers?
Thanks and Regards,
Reena

Hi Prabhakar,
This is Raji. I also need to add the custom columns in the UWL.I ahve done the same procedure as you have done in the XML code.
I have done lot many changes in the SRM config file and the standard config file.but I feel the task can be achived with out that much of complex work.
It would be great if you can share , how this issue got resolved for you. hence would be useful for everybody.
Thanks in advance!!!
Raji

How to add custom columns with BO data from GP to UWL

Hi
We have CE 7.1 in our project UWL taskitems only have GP workflow tasks.
In UWL we can see that by default there are standard columns but now we need to add custom columns with data from ours BO associated to process instance
For that we need to develop one custom connector for UWL where we can retrieve the values from custom conenctor to UWL.
Currently our NWDS 7.1 does not have plugins for UWL Connector can anybody tell me where can I download this plugins?
thanks in advance!
Regards
Cristian

Hi,
plz refer the following link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0ee5047-c7a0-2a10-70b7-9557e3e4d440
Regards
Manohar

Custom attributes in UWL

Hi All,
i am trying to add Custom attributes in uwl view but value is not comming for that corresponding attributes.
My code is below
<CustomAttributes>
 <CustomAttributeSource id="WEBFLOW_CONTAINER" objectIdHolder="externalId" objectType="WebflowContainer" cacheValidity="final">
 <Attribute name="Reason" type="string" displayName="Reason"/>
 <Attribute name="BeginDate" type="string" displayName="Trip Start Date"/>
 </CustomAttributeSource>
</CustomAttributes>
<DisplayAttribute name="Reason" type ="string" width="" sortable="yes" format="medium">
 <Descriptions default="Reason">
 <ShortDescriptions>
 <Description Language="en" Description="Reason"/>
 </ShortDescriptions>
 </Descriptions>
 </DisplayAttribute>
 <DisplayAttribute name="BeginDate" type ="date" width="" sortable="yes" format="medium">
 <Descriptions default="Trip Start Date">
 <ShortDescriptions>
 <Description Language="en" Description="Trip Start Date"/>
 </ShortDescriptions>
 </Descriptions>
 </DisplayAttribute>
Can tell me that where i am doing mistake.
Regards,
Piyush

solved,
problwm was from workflow side.

UWL configuration on EP Server to show BPM Tasks

Hello Experts,
I have implemented a federated network between 2 portal systems; EP portal as a consumer and BPM server as a provider.
I can not list BPM tasks on EP Worklist but if a grant a BPM's core role to user i am able to use BPM Tasks and use them on a different UWL,
So basicly, the user (user_a) has the following roles;
(This role comes from BPM Server with FPN)
NAME             = pcd:portal_content/com.sap.pct/every_user/com.sap.bpem/com.sap.bpem.roles/com.sap.bpem.Enduser
DESCRIPTION = BPEM End User
SOURCE         = pcd:portal_content/every_user/general/eu_core_role
(Standart User role on EP Portal)
NAME             = pcd:portal_content/every_user/general/eu_core_role
DESCRIPTION = Every User Core Role
SOURCE        = Portal Role
(This role comes from BPM Server with FPN)
NAME             = pcd:portal_content/every_user/general/eu_core_role
DESCRIPTION = Every User Core Role
SOURCE         = BPM_AND_EP_PORTALS
And I see two UWL's, one shows tasks within EP the other one shows BPM Tasks from BPM,
How can i merge these two ?
Thanks in advance,
Yasin

hi Dave,
cpl of questions are you on a federated network or are you using any proxy to access the portal? usually it will be slightly delayed some times based on the proxy cache. how are you adding the reports to role through delta link or copy?
When using the portal cache, data updates can appear with a delay.
pls go through the following link it may help you.
http://help.sap.com/saphelp_nw70/helpdata/EN/25/8c174082fe1961e10000000a155106/content.htm
Jo

JTable with custom column model and table model not showing table header

Hello,
I am creating a JTable with a custom table model and a custom column model. However the table header is not being displayed (yes, it is in a JScrollPane). I've shrunk the problem down into a single compileable example:
Thanks for your help.
import javax.swing.*;
import javax.swing.table.*;
public class Test1 extends JFrame
 public static void main(String args[])
 JTable table;
 TableColumnModel colModel=createTestColumnModel();
 TestTableModel tableModel=new TestTableModel();
 Test1 frame=new Test1();
 table=new JTable(tableModel, colModel);
 frame.getContentPane().add(new JScrollPane(table));
 frame.setSize(200,200);
 frame.setVisible(true);
 private static DefaultTableColumnModel createTestColumnModel()
 DefaultTableColumnModel columnModel=new DefaultTableColumnModel();
 columnModel.addColumn(new TableColumn(0));
 return columnModel;
 static class TestTableModel extends AbstractTableModel
 public int getColumnCount()
 return 1;
 public Class<?> getColumnClass(int columnIndex)
 return String.class;
 public String getColumnName(int column)
 return "col";
 public int getRowCount()
 return 1;
 public Object getValueAt(int row, int col)
 return "test";
 public void setValueAt(Object aValue, int rowIndex, int columnIndex)
}Edited by: 802416 on 14-Oct-2010 04:29
added

Kleopatra wrote:
jduprez wrote:
See http://download.oracle.com/javase/6/docs/api/javax/swing/table/TableColumn.html#setHeaderValue(java.lang.Object)
When the TableColumn is created, the default headerValue is null
So, the header ends up rendered as an empty label (probably of size 0 if the JTable computes its header size based on the renderer's preferred size).nitpicking (can't resist - the alternative is a cleanup round in some not so nice code I produced recently <g>):
- it's not the JTable's business to compute its headers size (and it doesn't, the header's the culprit.) *> - the header should never come up with a zero (or near-to) height: even if there is no title shown, it's still needed as grab to resize/move the columns. So I would consider this sizing behaviour a bug.*
- furthermore, the "really zero" height is a longstanding issue with MetalBorder.TableHeaderBorder (other LAFs size with the top/bottom of their default header cell border) which extends AbstractBorder incorrectly. That's easy to do because AbstractBorder itself is badly implemented
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6459419
Thanks for the opportunity to have some fun :-)
JeanetteNo problem, thanks for the insight :)

Custom column to show total remaining storage space for a host

I'm looking for a way to easily view the total amount of remaining storage space for a virtual host. At present, viewing the properties for a host in VMM is the only way to view this in the GUI. I was looking at sourcing a Powershell command to do this,
and then feed it into a custom column, for easy viewing within the VMM main window. This is probably best suited to the Powershell forums, but I placed the post here, as I may have overlooked another way to achieve this within VMM itself. Has anyone desired
for such a thing?
Many thanks.

I'm looking for a way to easily view the total amount of remaining storage space for a virtual host. At present, viewing the properties for a host in VMM is the only way to view this in the GUI. I was looking at sourcing a Powershell command to do this,
and then feed it into a custom column, for easy viewing within the VMM main window. This is probably best suited to the Powershell forums, but I placed the post here, as I may have overlooked another way to achieve this within VMM itself. Has anyone desired
for such a thing?
Many thanks.

How to show relation attribute on logical model

Hi.
How to show child entity relation attributes on logical model?
Entity properties attribute list contains relation attributes, LM dont show they.
I have model with several subviews. I need to show some entity without related entities but need to save "semantic" of relations on this subview. When relation attributes does not visible - no information about invisible relations on this subview.
I can create my own visible attribute like "reference to customer" to make sense the relation with entity "Customer". This case problem is relation attribute presents in entity implicitly and relation model have 2 attribute - my own and generated FK column.
In logical model i can`t replace child table relation attribute to my own "visible" attribute.
In relational model i should redefine FK manually. Transformation script is posible but very odd way.
Any advice appreciated.

I am confused.
I think the legacy Oracle Designer Barker notation could show reation attributes optional or by default, int`t it?
Thanks a lot anyway.

Custom columns in task list

Hello,
I'd like to ask your help with a problem concerning the task list page.
For each task I have some additional data stored in a remote database, I use the "task number" for the join. What I'd like to do is:
- show these extra values in the task list in new, custom columns
- give the user the ability to filter and sort by the new columns
Could you give me some ideas to get me started? Should I dig deep into the "TaskList" servlet and somehow extend the column set and add the values to the tasks using JDBC? Is this goal achievable at all??
Any help will be much appreciated,
Denes Toth

Hello again bnainani,
I tried to define a flex field mapping and display it in the task list. Creating the mapping went fine, but I couldn't select the new column ("label") when creating a custom view to display the flex field data.
The Developer's Guide sais "A mapped payload attribute can also be displayed as a column in a custom view, and used as a filter condition in both custom views and workflow rules.". But how van I achieve this? The flex field label is not displayed in the available columns dropdown when selecting the columns of the view.
What am I missing?
Once again, thanks for any help in advance...

LOV of column names with a report's custom column headings?

I have a list ov values definition that looks like this:
select column_name d, column_name r from all_tab_columns where table_name = 'DATABASE_LIST'
I'd like to list the custom column headings from a report as d, rather than repeating the column_name. How can I do this?

As Anton said, the best thing is to store your custom headings in a table so that you can use the table for your LOV as well as for your report headings.
To use dynamic report headings, you can use the 'PL/SQL function body returning colon-delimited headings' feature on the Report Attributes page.
So, if your report headings are stored in table t that function body can be
declare
l_headings varchar2(4000)
begin
for rec in (select heading from t) loop
l_headings := l_headings||':'||rec.heading;
end loop;
return ltrim(l_heading,':');
end;Hope this helps.

Is there an easy view of assigned Retention Tags in main view of Messages, e.g. a custom column?

Hi,
I have a requiement to have an easy/overall view of assigned Retention Policy tags against a list of messages in outlook 2010.
I envisage that if there was a column in the main message list view, that showed the assigned tag against each message and that could be sorted, e.g. so I can see what has an assigned tag (and what it is) and what doesn't, this would hit the mark perfectly.
Any such capability?
Can I create a custom column that extracts a message property to do this?
If so, how?
Thanks! David.

Hi Greg,
Sorry it's been a couple of days, it's been busy.
Unfortunately not. I raised it with our devs to take a look at. I was initially after an assessment of effort. But they were quoting me a number of days effort just to get to the point of being able to tell me how long it would take. At that point I
pulled it, as it wasn't a must-have requirement.
Still, it would have been nice.
To extract such a property, I might imagine an Outlook plug-in to extract the data from the property and watchers to look out for changes in various circumstances. In this way if you can get the data into a new Custom Message Property, a Column
will readily display it. It feels a little over-engineered and duplicates the data just to get it into a place to show it.
Maybe there are easier ways. But no, I didn't make progress.
All the best. Ta, /David.

Custom column added is not available for Calendar list view in SharePoint 2010

I created a custome column "Breakline" in a custom content type 'SM event", and applied the content type to a Calendar.
The column is listed under the content type "SM event" but it is not listed when I tried to modify the view using the "Breakline" column.
Does anyone know why?

I set "Breakline" hidden because I don't want to show this in create new item form.
I realized that may be the reason. So changed the column to Optional in CT and created a new calendar using that CT. then at list level CT I changed it to Hidden. That works. The column is available for use when modifying view.
Thanks

Addition of a custom column in a table view

Hi all,
I want to add a custom column in a table view. Kindly tell me if this is possible.
Regards,
Vivek Pandey

Hi Vivek,
This can definately be done....you will have to declare and iterator and in the GET_COLUMN_DEFINITIONS, declare the column name....
Referr to blogs :
<a href="/people/brian.mckellar/blog/2003/10/31/bsp-programming-htmlb-tableview-iterator Basics</a>
and
<a href="/people/thomas.jung3/blog/2004/09/15/bsp-150-a-developer146s-journal-part-xi--table-view-iterators Iterator.</a>
The second blog shows how to insert a icon, which is an extra column...
Hope this helps.
Do reward each useful answer..!
Thanks,
Tatvagna.

Showing BPM attributes in UWL custom columns.

Similar Messages

Maybe you are looking for