JOB IN BACK GROUND
I MADE THIS AND IT'S NOT WORK WHY???
I MUST RUN IT ONLY IN BACKGROUD,IF I MADE
PROGRAM---->EXECUTE IN BACKGROUD IT'S WORK???
data: name like tbtcjob-jobname.
data: number like tbtcjob-jobcount.
DATA: PARAMS LIKE PRI_PARAMS,
DAYS(1) TYPE N VALUE 2,
COUNT(3) TYPE N VALUE 1,
VALID TYPE C.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING DESTINATION = 'LOCAL'
COPIES = COUNT
LIST_NAME = 'TEST'
LIST_TEXT = 'SUBMIT ... TO SAP-SPOOL'
IMMEDIATELY = 'X'
RELEASE = 'X'
NEW_LIST_ID = 'X'
EXPIRATION = DAYS
LINE_SIZE = 79
LINE_COUNT = 23
LAYOUT = 'X_PAPER'
SAP_COVER_PAGE = 'X'
COVER_PAGE = 'X'
RECEIVER = 'SAP*'
DEPARTMENT = 'System'
NO_DIALOG = ' '
IMPORTING OUT_PARAMETERS = PARAMS
VALID = VALID.
IF VALID <> SPACE.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = name
IMPORTING
jobcount = number
EXCEPTIONS
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
OTHERS = 4.
IF sy-subrc = 0.
SUBMIT rxxxx TO SAP-SPOOL
SPOOL PARAMETERS PARAMS
WITHOUT SPOOL DYNPRO
WITH datum IN r_datum
WITH sum = 'X'
VIA JOB name NUMBER number
AND RETURN.
IF sy-subrc = 0.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = number
jobname = name
strtimmed = 'X'
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
Hi Rani,
What is the error that you are getting???
Thanks & Regards,
YJR.
Similar Messages
-
Info Package-Schedule Jobs in Back ground
Hi,
I want to schedule a job in back ground,I can find that option under schedule tab in the infopackage,
But there is a similar data flow for different data targets when i checked the info package
The column-Job Name Prefix/Sufic is filled with some value
what exactly Job Name Prefix/Sufix will do
ThanksHi
Thanks for the info provided,But u misunderstood my question
I want to know what exactly the function of Job name prefix/sufix
in the schedule
Thanks -
Problem in scheduling job in back ground
hi all,
My project scenario is ,i have written a program to create WBS element.
For 1 WBS creation ,In production it takes 20 to 30 min to create as there are many transactional bdcs.
so i want to run that perticular code (all bdcs) in back ground.
so i wrote another program with name 'zback_job_for_wbs_creation' and added all the required code.
in old program,i have written some code to execute this new program in back ground . this code is below..
FORM submit_for_job.
TABLES:btcevtjob.
DATA:l_jobname LIKE tbtco-jobname,
l_jobnumber LIKE rsjobinfo-jobnumb.
DATA: count LIKE btcevtjob-jobcount,
jobname LIKE btcevtjob-jobname.
DATA: job_was_released LIKE btch0000-char1.
jobname = 'WBS_CREATION'.
EXPORT s_scrnum TO MEMORY ID 'W_SCRNUM'.
EXPORT iscrh TO MEMORY ID 'W_ISCRH'.
EXPORT iscrl1 TO MEMORY ID 'W_ISCRL1'.
EXPORT iscrl2 TO MEMORY ID 'W_ISCRL2'.
EXPORT iscrl2b TO MEMORY ID 'W_ISCRL2B'.
EXPORT iscrl2a TO MEMORY ID 'W_ISCRL2A'.
EXPORT iscrl1a TO MEMORY ID 'W_ISCRL1A'.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = jobname
IMPORTING
jobcount = count
SUBMIT zback_job_for_wbs_creation
with S_SCRNNUM IN S_SCRNUM
and return via JOB JOBNAME NUMBER COUNT TO SAP-SPOOL
WITHOUT SPOOL DYNPRO.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = count
jobname = jobname
strtimmed = 'X'
IMPORTING
job_was_released = job_was_released
EXCEPTIONS
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
OTHERS = 8
here i have put break-point in my submitted program..but its not going to the program and job gets closed successfully without executing my code( Submitted Program).
in above submit statement , if i just write submit progname and return ,then it goes to program.
but job_close function module throws exception no 5.
so pls help me out for this..
i want my submitted program to be run in back ground..
thanks.Hi,
Start Job Monitor SM37 and search for your job. I think you will find it.
Jobs are not linked to GUI frontend. So you can't debug your background job in that way.
If you want to debug you must be tricky.
Code a never ending loop with an exit condition which you can control by debugging.
DATA:
stop_for_capture.
DO.
IF sy-uname NE 'HABICH'. "change to your account
EXIT.
ENDIF.
IF NOT stop_for_capture IS INITIAL.
EXIT.
ENDIF.
ENDDO.
When your job is running, start TA SM50 and mark relevant batch work process and
choose by menu program -> program -> debugging.
regards
Walter Habich -
Back Ground Job not showing in SM50,
Hi Friends,
I am running XK99 to Mass update Vendor details in Back ground, I am getting some error while running the job in back ground, I would like debugg the issue.
But in SM50 Iam not able to see the job I sechduled using program MASSBACK or transaction XK99.
Please let me know, what could be the problem.
Thanks,
Veerendra.Hi,
Try this - goto SM37 select the background job and enter JDBG in the command field (similar to entering /h to debug).
Cheers.
...Reward if useful -
Hi all,
i have processed a job in back ground job scheduling.
But i want to cancel it using t.code SM36.
I have seen that there is delete button, which is not suitable to cancel.
Can anyone help in this regard.
Thanks in advance
VenkatDear Venkat
If the job is in active state. Go to SM37 -> Selecet the respective Job -> Ctrl+F1 or you can click on STOP button in application tool bar.
Similary you can delete job using Shift_F2
Thanks
Eswar -
Schedule the Back ground Job with Fiscal Year Vaient????
Hello Guru's,
Please let me know the process of "Schedule the Back ground Job with Fiscal Year Vaient" in APO DP?
Great thanks for your help.
Regards,
SreeHi Venkat,
As i told i am maintaining the periods as 5-4-4, So i want schedule the job as first after the 5th week, then after the 4 th week, then after the 4th week and again after the 5th week ...... like that....
can we schedule the job in back ground as per this periodically???
Thanks for the response.
Regards,
Sree!!
Edited by: sree gunti on Nov 26, 2008 3:30 PM -
How To Handle With Back Ground JOB From WEBUI When Click On "Appove"
Hi
How To Scheduled A Job Through ABAP Report In back end Of CRM when i click on "Approve" Button in WEBUI From result list.
As per My requirement I have a Search View and Result View
In Search View I have Below Fields
ITC Vendor ID
Claim Status
User status (date status changed)
Model
Serial Number
Date completed of Service Completion
Based on Search Criteria I will get Result In Result View.(Suppose 10 Records I got In Result View)
In the Result View I need to Add one Button As "Approve"
When i Click On Approve button One Pop up Message Need to Open And In that popup window I need to Display Below Text
"Approve Claim Job Has Started In Background
Note: Only Claims Which are in Submitted Status Will be Approved. you May Close This Window"
In SAP CRM System Back Ground Job Need To Start When Click On "Approve" Button In WEBUI .
In the Back Ground ABAP Report which will validate based on Result List Records"
In the Result List we may have all types of Claims which are status in "Submitted" "Pending" "Rejected" "Approve".
I need to collect all records from Result list and validate Those Records who's Status in "Submitted
1)Sort all the claims based on ITC Vendor ID.
2)Grouped all the submitted claims against each ITC Vendor ID from the search result
3)Change the status of the selected submitted claims to Approved.
4)Displays information messages as mentioned whenever a claim is approved, the same message will be captured in the job log.
‘Claims <ClaimID 1>,…<ClaimID N> now approved for ITC Vendor ID’.
5)Sending Email to each IRC.
6)Capture all the approved claims in the below format (Format Attached "Screen Shot Attachment")
7)Store the file in the Application Server AL11 in .csv format
Please Find Attachement For Reference.
1)ITC Claim Screen Shot
2)Screen Shot For Attachment
Thanks
RajHi,
You can add the following code in on approve method to show popup to the user,
IF req_edit IS NOT BOUND. " gloabl attribute in impl class of the view
REFRESH lt_buttons.
lss_button-id = 'btnyes'.
lss_button-text = 'YES'.
lss_button-on_click = 'YES'.
APPEND lss_button TO lt_buttons.
CLEAR lss_button.
lss_button-id = 'btnno'.
lss_button-text = 'NO'.
lss_button-on_click = 'NO'.
APPEND lss_button TO lt_buttons.
CLEAR lss_button.
CALL METHOD comp_controller->window_manager->create_popup_2_confirm
EXPORTING
iv_title = 'ATTENTION'
iv_text = 'Are you sure you want to edit this document?'
iv_btncombination = '99'
iv_custombuttons = lt_buttons
RECEIVING
rv_result = req_edit.
req_edit->set_on_close_event( iv_event_name = 'EDIT' iv_view = me ). "#EC NOTEXT
req_edit->open( ).
RETURN.
ELSE.
lr_node ?= req_edit->get_context_node( 'OUTPUTNODE' ).
lv_outbound = lr_node->get_event_name( ).
* CLEAR ptc_pricing_status.
* lv_outbound = req_edit->get_fired_outbound_plug( ).
IF lv_outbound = 'YES'.
you can use the submit report code here and you can al the validations here
ELSE. " No
if user clicks no nothing to do..
ENDIF.
CLEAR req_edit.
ENDIF.
Best Regards,
Dharmakasi. -
How to find the back ground job details
Hi All,
I have a back ground job running from many days, now we would like to know when this job was created on what date this job actvlly created and schuduled.
Please informe me how to check this.
Thanks & Regards,
MuralikrishnaOn SM37 screen there is plenty of options are there:
This is what i got from SAP help
Explanation for each selection field:
o Jobname: Name of the job as an identifier.
o Username: Name of the user who designed and planned the job.
o Start date: The start condition of the job, which could be a time
frame or an event that the job is waiting for. Specifying both will
yield jobs whose starting condition is either of the two
conditions.
ABAP program step: Name of an ABAP program that acts as a step in a
job.
Status selection: The current status of the job. By default, the
SCHEDULED option is not marked. To see the scheduled jobs, you must
explicitly check this.
also give the proper values in Job Satus also. -
Any restictions on back ground job when submit the session?
Hello friends
below is my code part. problem is when i execute this program in back ground the data is not picking from APQI. but in fore ground it is picking . for this SESSION submission in back ground am i missing any thing here. please suggest me , any restiction is their in back ground? if possible please send a sample code to submit SESSION automatically in background.
SUBMIT rsbdcsub AND RETURN
USER sy-uname
WITH mappe = p_group
WITH von = sy-datum
WITH bis = sy-datum
WITH z_verarb = 'X' .
SELECT userid credate groupid qstate FROM apqi
INTO TABLE it_apqi
WHERE userid = sy-uname
AND credate = sy-datum
AND groupid = p_group
AND qstate = 'E'. "Only look for 'Error' status
DESCRIBE TABLE it_apqi[] LINES temp.Codes for Submitting the session through RSBDCSUB (via Job)...
" The function module JOB_OPEN is called to create the job.
call function 'JOB_OPEN'
exporting
delanfrep = 'X' "Delete job after execution
jobname = fv_jobname "Job name
importing
jobcount = fv_jobcount "Internally generated
exceptions
cant_create_job = 1
invalid_job_data = 2
jobname_missing = 3
others = 4.
if sy-subrc = 0.
submit rsbdcsub
with mappe = v_filec
with von = sy-datum "From
with bis = sy-datum "To
with z_verarb = 'X'
with fehler = ' '
with batchsys = space
with logall = ' '
via job fv_jobname
number fv_jobcount
and return.
call function 'JOB_CLOSE'
exporting
jobcount = fv_jobcount
jobname = fv_jobname
strtimmed = 'X'
exceptions
cant_start_immediate = 1
invalid_startdate = 2
jobname_missing = 3
job_close_failed = 4
job_nosteps = 5
job_notex = 6
lock_failed = 7
others = 8.
Hope this helps!
Edited by: Vin on Jun 4, 2009 10:58 AM -
Hi Experts,
I want to execute a program in Back ground but my program has selectionscreen.
I don't want to Provide Variant for this screen that's why i am passing these values Thru INITILIZATION event.
But Background is not moving forward. It is waiting for I/p.
Can you please help me on this.
Thanks,
Murali Krishna KMurali,
For a program to be executed in background you need to create a variant and provide the variant name in the def. of the background job. giving the values at INITIALIZATION will NOT work.
On the second thought, you might have declared your parameters as OBLIGATORY. Take out that and make them optional. Now you schedule this in background without a variant and give the values in the INITILIZATION event.
Regards,
Ravi
Note : Please close the thread of the issue is resolved.
Message was edited by: Ravikumar Allampallam -
Hi All,
I need to schedule a daily background job for MB52 transaction and need to save the output of MB52 in a specified directory .
Can any one tell me whether it is possible to save back ground job output in specified directory?
Thanks & Regards
k.NirmalaHi Nirmala,
Set up variant at MB52 transaction and use SM37 and Sm36 transaction to schedule job.
Define job at Sm36 and use program - RM07MLBS and use your variant.
schedule job and set up time and date for periodcally.
and it will run and you can see the status at SM37 Transaction .
the background job will create spool and which will contain your output.
if you want to download your output ,then you need to write custom program to get spool information from TSP01 table and use open dataset command to down load specifi directory.
Reward Points if it is helpful
Thanks
Seshu -
Error while activating ODS is not caught in the back ground job..
Hi All,
We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
Thanks for reading.
Umamaheswar kumarHi Uma,
A few hints for running and schedule and monitoring process chains:
- always schedule the process chain in tcode RSPC
- check the log in RSPC for error messages, or
- check BW monitor for the ODS concerned (tcode RSMO, tab Details)
if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
either in RSPC - log or RSMO.
hope it helps.
Regards,
Lilly -
Hi Experts,
See the following code.
When i run this program in fore ground it is giving time out error.Current running time is 600 Sec.When i run in Back ground with Immediate.Excute option after some time the job is cancled.When i see the job log It is mentioned as "More memory space requested".
Can any body Plz go thru the code and tell me what is the problem?
*& Report ZTEST_XML
REPORT ZTEST_XML.
*data: ifile like salfldir occurs 0 with header line.
data:p_path TYPE rsmrgstr-path value 'F:\usr\sap\CD5\serena\OCOS\'.
data: p_file type string.
TYPES: BEGIN OF t_xml_line, "Structure for holding XML data
data(256) TYPE x,
END OF t_xml_line.
data: BEGIN OF t_xml occurs 0,
rec TYPE x,
END OF t_xml.
data: begin of jtab occurs 0,
text type string,
end of jtab.
DATA: l_xml_table TYPE TABLE OF t_xml_line. " XML Table of the structure
data: wa(256) type x.
data: wa_xml like l_xml_table occurs 0.
data: l_str type string.
data: start_line type i,
end_line type i,
v_str type string.
data: cnt type i,
idx type i,
count1 type i,
len type i,
diff type i.
data: catalogid type string.
DATA : BEGIN OF DAT OCCURS 0,
LIN type string,
END OF DAT.
DATA: BASIC_TEXT LIKE THEAD OCCURS 0 WITH HEADER LINE.
DATA: YGUID LIKE COMM_PCAT_CTY-GUID,
ZGUID LIKE COMM_PCAT_CTV-PARENT_CATEGORY.
DATA: BASICTEXT like TLINE OCCURS 0 WITH HEADER LINE.
DATA: IT_THEAD LIKE THEAD OCCURS 0 WITH HEADER LINE.
data: begin of IT_SERENA occurs 0,
ID LIKE COMM_PCAT_CTY-ID,
TEXT type string,
end of IT_SERENA.
DATA:WA_SERENA like IT_SERENA.
DATA: wa_files TYPE rsfillst,
ifile LIKE TABLE OF wa_files.
data: begin of it_error occurs 0,
err type string,
end of it_error.
data: errorfile type string value 'error.txt'.
CALL FUNCTION 'SUBST_GET_FILE_LIST'
EXPORTING
DIRNAME = p_path
FILENM = '*'
PATTERN =
TABLES
FILE_LIST = ifile
EXCEPTIONS
ACCESS_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at ifile into wa_files.
if not wa_files-name cs '.xml'.
delete ifile.
endif.
endloop.
loop at ifile into wa_files.
concatenate p_path wa_files-name into p_file.
open dataset p_file for input in text mode encoding default.
if sy-subrc = 0.
do.
read dataset p_file into l_str.
if l_str = space.
exit.
endif.
if sy-subrc <> 0.
concatenate text-002 p_file into it_error-err.
append it_error.
clear it_error.
exit.
else.
jtab-text = l_str.
append jtab.
clear jtab.
endif.
enddo.
else.
concatenate text-001 p_file into it_error-err.
append it_error.
clear it_error.
continue.
endif.
loop at jtab.
if jtab-text cs 'Catalog ID'.
idx = sy-tabix .
endif.
endloop.
read table jtab index idx.
if sy-subrc = 0.
catalogid = jtab-text.
endif.
if catalogid cs '<![CDATA['.
shift catalogid left by 56 places.
endif.
if catalogid cs ']]></field>'.
replace ']]></field>' with space into catalogid.
endif.
write:/ 'Catalogid is:', catalogid.
IT_SERENA-ID = catalogid.
LOOP AT jTAB.
if jtab-text cs 'longDescription'.
start_line = sy-tabix + 1.
exit.
endif.
endloop.
cnt = start_line.
do.
read table jtab index cnt.
if jtab-text cs '</field>'.
end_line = sy-tabix.
exit.
else.
cnt = cnt + 1.
endif.
enddo.
loop at jtab from start_line to end_line.
concatenate jtab-text v_str into v_str separated by space.
endloop.
shift v_str left by 18 places.
shift v_str left by 10 places.
len = strlen( v_str ).
DO.
IF COUNT1 >= LEN.
EXIT.
ENDIF.
DIFF = LEN - COUNT1.
IF DIFF < 125.
DAT-LIN = v_str+COUNT1(DIFF).
ELSE.
DAT-LIN = v_str+COUNT1(125).
ENDIF.
DAT-LIN = v_str+COUNT1(125).
APPEND DAT.
WRITE :/ DAT-LIN.
CLEAR DAT.
COUNT1 = COUNT1 + 125.
ENDDO.
REFRESH BASIC_TEXT.
REFRESH BASICTEXT.
CLEAR YGUID.
CLEAR ZGUID.
SELECT SINGLE GUID FROM COMM_PCAT_CTY INTO YGUID
WHERE ID = IT_SERENA-ID.
IF NOT YGUID IS initial.
if sy-subrc <> 0.
concatenate text-003 p_file into it_error-err.
append it_error.
clear it_error.
else.
SELECT SINGLE GUID FROM COMM_PCAT_CTV INTO ZGUID
WHERE PARENT_CATEGORY = YGUID.
ENDIF.
BASIC_TEXT-TDOBJECT = 'PCAT_CTY'.
BASIC_TEXT-TDNAME = ZGUID.
BASIC_TEXT-TDID = '0001'.
BASIC_TEXT-TDSPRAS = 'EN'.
APPEND BASIC_TEXT.
loop at DAT.
BASICTEXT-TDFORMAT = '*'.
BASICTEXT-TDLINE = DAT-LIN.
APPEND BASICTEXT.
endloop.
refresh DAT.
loop at basictext.
if basictext-tdline cs '![CDATA['.
replace '![CDATA[' with space into basictext-tdline.
ENDIF.
modify basictext.
ENDLOOP.
loop at basictext.
if basictext-tdline cs ']]>'.
replace ']]>' with space into basictext-tdline.
modify basictext.
endif.
endloop.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
HEADER = BASIC_TEXT
INSERT = 'X'
SAVEMODE_DIRECT = 'X'
OWNER_SPECIFIED = ' '
LOCAL_CAT = ' '
IMPORTING
FUNCTION =
NEWHEADER = IT_THEAD
TABLES
LINES = BASICTEXT
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR IT_THEAD.
IF SY-SUBRC = 0.
WRITE:/ 'DATA UPLOADED SUCCESSFULLY'.
ELSE.
WRITE:/ 'DATA NOT UPLOADED'.
ENDIF.
refresh jtab.
refresh DAT.
COUNT1 = 0.
clear v_str.
REFRESH BASICTEXT.
refresh dat.
close dataset p_file.
endloop.
open dataset errorfile for appending in text mode encoding default.
if sy-subrc = 0.
loop at it_error.
transfer it_error-err to errorfile.
endloop.
close dataset errorfile.
endif.
Is there any other FM which is similar to SAVE_TEXT?That depends. Can you please provide some more info how the programs are linked:
several steps in batch planning
cascade of submits
and what kind of failure might occur:
shortdump
Kind Regards
Klaus -
hi every one,
pls help me out in this.
i have written a program to create a wbs element.as it takes 20 to 30 min to create one element in production.in my program, there is part of code which creates wbs elements.
so i want to run tht part of code in background.
only part of code.
even i did the coding for it. i wrote a new program and i pasted that part of code in new program.
and this new program i m submitting in old one by creating a back ground job.
i m exporting few required internal tables for new report.i hav imported all internal tables in new report also..
but still this importing exporting is not happening..pls
tell me wat can be the problem..
thanks..Your code is not optimized according to performance,can you sed me your code ...
see my business card for my id.
Thanks -
Dear abapers i want to send an excel attachment from my computer to email and i do that using the following code it works correctly but now i want the program to run in back ground twice a month to some ones email address by giving default recipient email address.
with best regards,
Hahu D.
REPORT YEMAIL12.
data method1 like sy-ucomm.
data g_user like soudnamei1.
data g_user_data like soudatai1.
data g_owner like soud-usrnam.
data g_receipients like soos1 occurs 0 with header line.
data g_document like sood4 .
data g_header like sood2.
data g_folmam like sofm2.
data g_objcnt like soli occurs 0 with header line.
data g_objhead like soli occurs 0 with header line.
data g_objpara like selc occurs 0 with header line.
data g_objparb like soop1 occurs 0 with header line.
data g_attachments like sood5 occurs 0 with header line.
data g_references like soxrl occurs 0 with header line.
data g_authority like sofa-usracc.
data g_ref_document like sood4.
data g_new_parent like soodk.
data: begin of g_files occurs 10 ,
text(4096) type c,
end of g_files.
data : fold_number(12) type c,
fold_yr(2) type c,
fold_type(3) type c.
parameters ws_file type rlgrap-filename default 'd:\files\file1.xlsx'.
* Can me any file fromyour pc ....either xls or word or ppt etc ...
g_user-sapname = sy-uname.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ws_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
* PROGRAM_NAME = SYST-CPROG
* DYNPRO_NUMBER = SYST-DYNNR
field_name = 'ws_file'
IMPORTING
file_name = ws_file.
call function 'SO_USER_READ_API1'
exporting
user = g_user
* PREPARE_FOR_FOLDER_ACCESS = ' '
importing
user_data = g_user_data
* EXCEPTIONS
* USER_NOT_EXIST = 1
* PARAMETER_ERROR = 2
* X_ERROR = 3
* OTHERS = 4
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
fold_type = g_user_data-outboxfol+0(3).
fold_yr = g_user_data-outboxfol+3(2).
fold_number = g_user_data-outboxfol+5(12).
clear g_files.
refresh : g_objcnt,
g_objhead,
g_objpara,
g_objparb,
g_receipients,
g_attachments,
g_references,
g_files.
method1 = 'SAVE'.
g_document-foltp = fold_type.
g_document-folyr = fold_yr.
g_document-folno = fold_number.
g_document-objtp = g_user_data-object_typ.
*g_document-OBJYR = '27'.
*g_document-OBJNO = '000000002365'.
*g_document-OBJNAM = 'MESSAGE'.
g_document-objdes = 'hahu daily test this'.
g_document-folrg = 'O'.
*g_document-okcode = 'CHNG'.
g_document-objlen = '0'.
g_document-file_ext = 'TXT'.
g_header-objdes = 'hahu daily fishikta ameley'.
g_header-file_ext = 'TXT'.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = sy-uname
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
* FOLMEM_DATA =
* RECEIVE_DATA =
* File from the pc to send...
method1 = 'ATTCREATEFROMPC'.
g_files-text = ws_file.
append g_files.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
method1 = 'SEND'.
g_receipients-recnam = 'MK085'.
g_receipients-recesc = 'B'.
g_receipients-sndex = 'X'.
append g_receipients.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header.
*-- End of ProgramHi,
Will this help you.?
http://scn.sap.com/community/netweaver-administrator/blog/2010/02/25/how-to-email-output-from-background-jobs
Regards
Purnand
Maybe you are looking for
-
On the use of VARCHAR2 vs. CHAR
I'm posting an e-mail thread that has been moving around in my organization, whith guidance from an Oracle representative. The basic issue concerns the use of CHAR vs. VARCHAR2 when defining a table in Oracle. I would like to get some comments from t
-
Activation of the activity fails u0096 no source files in the active workspace
Dear All, Im working on a NWDI installation since last month. The NWDI server (NW2004s) has been installed and configured with the following parameters: Some Details: - Java Stack on SPS 12 - No complete Developer Workplace, we only use the
-
The subject says it all: Is there a reference test code (available for downloading) for Android to see if GPU acceleration is working on a device or not once the AIR RC1 with GPU is installed ? Perhaps something 'like' away3d info panel which shows i
-
Create Delivery with reference to seasonal stock transport order
Hello Gurus How do we create a delivery with respect to seasonal stock transport order, in R/3 4.7. Thanks in advance
-
What good are the Panic Logs?
I have reported Panic Logs to my local Apple store and ask that they check the codes to identify what is causing the kernel panics. Here is a sample code below: I highlighted the codes I mentioned. It seems to me that these codes should identify the