ShowOneTab with forEach - disappearing tabs

I'm using the following code to generate a set of tabs. On initial load the tabs and the first set of components render correctly, but when I click to switch to another tab, all tabs disappear resulting in a blank page.
organizerGroups is a list of group objects from which I pull the tab names.
organizerFieldList is a list of lists of values (one list per group) from which I generate the page components.
(Both lists have the same length.)
<af:showOneTab position="above">
<af:forEach var="fieldList" varStatus="status" items="#{myBean.organizerFieldList}">
<af:showDetailItem text="#{myBean.organizerGroups[status.index].name}">
<af:panelForm>
<!-- generate controls from organizerFieldList -->
</af:panelForm>
</af:showDetailItem>
</af:forEach>
</af:showOneTab>
Any help is appreciated. Thanks.

Thanks for the response! Turns out the bean's scope was set to request...the lists weren't available after the refresh.

Similar Messages

  • Secret inputText field on showOneTab is cleared when tab changes

    I have a secret inputTextField on a tab. If a change to another tab and then change back again the password is cleared.
    Is there a work around for this?
    Thanks
    Martin

    Hi frank,
    No, I don't do any extra submits.
    I have a simple af:showOneTab with a secret inputText field on tab 1. The secret textfield is bound to a property on a backing bean which contains the current value of a password. When I click on tab 2, than back to tab 1 the secret textfield has been cleared. I would add that there are non-secret fields on each tab which are not cleared.
    Martin

  • Tab bar is ~6px bigger with multiple tabs than it is with only one tab

    Example:
    I open a new FF window. One tab is open.
    I open a second tab. The tab bar now gains approx. 6 pixels in height. It shrinks back if I reduce the number of tabs I have open to 1.
    This is annoying. Is there anything that can be done about it?
    I've already tried fiddling with userChrome.css based on a Google search, but since I don't know what I'm doing I haven't had any luck in stopping this from happening.

    The close-button is present even if only one tab is open thanks to the "Last tab close button" addon which I have installed.
    Speaking of add-ons... I found out the problem disappears if I disable the Oxygen KDE add-on I have installed (probably should have tried disabling all add-ons first.... sorry!). However, the issue may still stand: I noticed that even without add-ons, if I close the last tab (with your setting in place), the FF tab bar shrinks by those same 6px.
    So I think what I'm needing is a way to make a tab bar with 0 open tabs the same height as a tab bar with 1+ open tab. I'm fairly confident that such a setting would automatically resolve the problem I turn out to be having with the Oxygen KDE add-on as well.
    Either way, it's probably best to take this issue up with the Oxygen KDE devs - correct? I'm terribly sorry if I've wasted your time.

  • Save the selected value from listbox with its respective tab control dropdown selcted values in another listbox

    Hi all,
    I am making a vi where I have to save the selected value from listbox with its respective tab control dropdown selcted values in another listbox.Whenever I select Item1 then the heading change and respective tab will open for that item.But Now I just want to save the selection and put it in another ListBox.SO that I can renmove or add according to my wish. Plz help me.
    Solved!
    Go to Solution.
    Attachments:
    my_vi.png ‏83 KB

    Hi, I successfully make the vi to insert itmes from listbox1 to listbox2.Whenever I select itmes 1 in listbox 1 it display same elected item in listbox2 , but it not appending the items in listbox2.Like If 1 is selected in listbox1 then 1 will display , next time after saving when I selct next item like 3 then in listbox 2, 1 is replaced by 3,it dont come in second row of listbox2.Hope I am able to explain.\
    Plz help me to resolve this.
    Attachments:
    listbox_update.vi ‏11 KB

  • Is there a way to select MULTIPLE tabs and then copy ALL of the the URLs and titles/or URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; However, I prefer to use a Firefox feature rather than download an add on. Thanks.

    Currently, I can copy ONE tab's url and nothing else (not its name). Or I can bookmark all tabs that are open. However, I'd like to have the ability to select multiple tabs and then copy ALL of the the URLs AND their titles/or copy ALL of the URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; when I download the add on, I get a message saying that using the add on will disable Firefox's tab features. I prefer to use Firefox features rather than download and use an add on. Is there a way to do this without an add on?

    Hi LRagsdale517,
    You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
    Please let us know how it goes.
    Best,
    Sara

  • Is there a way to open a browser and it "starts" with opening many tabs?

    Is there a way to open a browser and it "starts" with opening many tabs?
    e.g. I open a browser - and it starts on 3 or 4 tabs?

    Leave them open when you shuit Safari down. It doesn't have a home page function.
    You might check the app store for some alternate browsers. I beleive there a few that will do this.

  • Some of my songs in iPad Mini with RD disappeared all the sudden and I need to redownload it again. Same thing happen to my iPod touch 5 too. What's wrong with it? Is it the iOS problem?

    Some of my songs in iPad Mini with RD disappeared all the sudden and I need to redownload it again. Same thing happen to my iPod touch 5 too. What's wrong with it? Is it the iOS problem?

    Delete the music in your iTunes library, then go to iTunes store, Quick Link, 'Purchased' to redownload again.

  • Firefox will not connect or open. Mac OS 10.6.8. I was working with many open tabs when Firefox stopped working. Now it won't connect. I have uninstalled and downloaded it several times.

    I was working with many open tabs and firefox crashed. Now it won't connect to the internet at all.

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • I modified the budget categories on the numbers template so now the transaction tab does not communicate with the budget tab. I figured out how to change the drop down options but how do I get it to reflect on my budget sheet? Please help.

    If you are familar with the Numbers Budget Template it has two tabs 'Budget' and 'Transactions'. If you use the template as it is designed when you input expenses on the transaction tab it will automatically add that amount into the selected category on the budget tab. I have madified my budget tab to reflect the caegories that I need, which included adding several to the template. I also added to the table so it reflects my income and expenses so I can track where I am at with a glance. Since I did this, I can't get my transactions tab to communicate with the budget tab. I figured out how to change the options in the drop down box for category but I con't figure out how to get it to reflect onto my budget tab. I'm sure that it is an easy fix, however, I am just not well versed in Numbers. I appreciate your time in helping me with this issue.
    Respectfully,
    Jon

    My guess is that while you added catetories to your Budget Sheet by adding new lines and filling in the category column, you didn't also add the formulas to these new budget lines.
    The proper way to add those lines would have been to select a cell in the line just above where you want to add a line and type Option/Alt-DownArrow. This would have copied the formulas into the new line. Maybe you did this, and maybe not. You didn't give details on how you added the lines.
    Select C2 and D2 and Command-C to copy them to the Clipboard.
    Select all the cells of Columns C and D except for the top and bottom rows and Command-V to Paste.
    If I have properly guessed the problem, you should be in business. This assumes that your Categories are exaclty the same as the entries in your Pop-up menus. Spelling counts, as does case.
    Jerry

  • Firefox always opens with the "search" tab even though I don't want it. How do I stop this?

    When I open Firefox, it opens normally to my home page. But it also opens with the "search" tab, though I don't want it. How do I prevent this?

    From the search page offered go to your chosen home page. Now move the mouse to the top left and scan the options for view, Toolbars and make sure that the "Menu bar" is ticked. This will show the File, Edit, View, History, Bookmarks and tools options plus Help. Click on tools, then Options and select current page as your home page. All should now be sorted.

  • When I open a second browser window (Firefox 5) it does not open to my homepage. It opens with a "New Tab".

    The first time I open a browser window in Firefox 5 a tab opens to my homepage which is what I want. Any browser windows that I open after that open with a "New Tab" and a blank screen. I need to press the "open a new tab" button to get to my homepage.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • I have 2 copies of Firefox open (two different windows with lots of tabs), if I reboot can I restore both sessions?

    I have 2 copies of Firefox open (two different windows with lots of tabs), if I reboot can I restore both sessions? I am familiar with clicking history/ restore previous session, but don't want to reboot to let windows update to do it's thing unless I can restore both sessions.

    If they are running different profiles, then yes.

  • With holding tax tab not showing up in MIRO

    Hi,
    Im trying to do a MIRO for a vendor which requires with holding tax. The setting in done in the vendor master.However while doing MIRO, the with holding tax tab does not show up.
    Does anyone know why with holding tax tab is not showing up in MIRO and what needs to be done.
    PS: It is set up correctly in the vendor master and it works and shows up while doing FI transactions.
    Thanks

    Hello Shruti,
    Kindly check if on the vendor master, on withholding tax tab, checkbox "liable" has been ticked.
    Also kindly check the reconciliation account defined in the vendor master and compared in GL master record, FS00, should have a field status group of G067- Reconciliation Accounts or its equivalent in case you don't use standard SAP field status grouping.
    And also check on the MRIO screen, have you checked "calculate tax" under general tab.
    Hope it will help you
    Thanks
    Para

  • How do I make firefox start with previous session tabs open by default?

    I basically want Frefox to start with the same tabs and URL locations as they were when I previously closed Firefox.

    Click the Firefox menu button or Edit in the classic menu, then select Preferences, select the General tab, and under the Startup heading select "Show my windows and tabs from last time".

  • When I open a new tab I get a side panel with the new tab instead of changing to a full screen....missing a setting somewhere ..help plse and thanks

    when I open a new tab, I get a sidebar instead of a full page with the new tab....have tried changing all of the tab settings under options...am getting old and senile and this drives me nuts..plse help and thanks for your time. New FF is quick

    hello, please install the search reset addon - it will revert the most common customizations those adware programs do in firefox back to the default: https://addons.mozilla.org/firefox/addon/searchreset/

Maybe you are looking for

  • Writing to file problem

    Hi, I'm reading a binary switch file and trying to write it to an ASCII file. I'm able to read the file. I can see the output on screen. But when I try to write the output to file - no success. The file is getting created but remains blank. I'm using

  • Bootcamp with Windows 8

    Has someone built a bootcamp partition running Win 8? Someone know if windows 8 is compatible with bootcamp? Thanks

  • How to go about optimising this class?

    I'm rather new to actionscript, but I'm figuring it out as I go. I am making a game. One of the primary features of this game is darkness. I chose to use tiles to represent areas outside the players sight range, this works great on a small scale. The

  • Valuation Class Wraning Message - ME127

    Hi All, As per our business, particular material is maintianed for valuation type Z01 (In-House production) and not maintianed for Z02 (External procurement). During creation of STO accroding to customization the valuation type Z02 gets defaulted in

  • Split 1 IDoc into 2

    Hi All, The scenario is SAP MDM --> PI -->SAP ECC, MDM sends XML Message with 3 segments and a field (Material Number). The 1st and 3rd segment have a field class type, based on which the splitting is to be done. The 1st segment has a default class t