Signal searching and speaker on during call

Now I'm using iPhone4 as S/W version 5.0.1 but found many problem
1. The main problem the iPhone searching AIS signal many time and error must close the cell phone and turn it on again before use call out.
2. Found speaker phone turn on by them self during call and talking. (Don't touch anything.)

 @Jetfighter.
 Please refer to JCCPRJ's post and the link he provided.
Also refer to Azizshroff's post, as it appears to be caused by Fring.
However, you don't have to uninstall Fring to solve the issue, you just have to disable it's automatic start up at system boot option.
Cheers.
Ray

Similar Messages

  • My iPhone 5 crackles and pops loudly during calls (with and without speaker phone.)  I'm experiencing this same same issue on my third iPhone.  Is this a common problem?  Short of getting the phone replaced (yet again!) is there a solution?

    My iPhone 5 frequently crackles and pops loudly during calls (while using speaker phone, as well as not using speaker phone.)  After being inspected by techs at the Genius Bar, my phone has been replaced twice; thus, I am currently on my third iPhone 5.  Incredibly, I am, yet again, experiencing the exact same issue. Short of getting my fourth iPhone, is anyone aware of a solution?

    if it's the exact same issue, either it's a problem with your service or with your software if you're restoring from a backup each time. it's pretty darn near impossible for 3 phones to have the same exact hardware issue, so that's unlikely. is this an at&t iphone? if so, are you continuing to use the same sim card? if so, get a new one and try that out. if that's not the issue, restore the phone as new and make a few phone calls. if the issue's gone away, there's something wrong with your backup

  • Noisy background noise when using speaker phone during calls

    Hi
    Phone: sony experia z3
    Does anyone have the same issue as me when you use the speaker phone during calls?
    There is a lot of background noise.The caller's voice also sounds echoish
    When I turn off the speaker and switch back to normal call it noise disappeared, the the caller's voice is clear.

    See if speaker voice enhancement is enabled.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Issue with oracle ultra search and the document.getURL() call...

    I am writing a search tool using the ultra search engine in the background to make a search across an Oracle 9i database hitting various tables and columns.
    The search is working great and the product is working wonderful. However, I have a slight problem. I developed the Java application that interfaces to the UltraSearch Engine using classes12.jar and nls_charset.jar - I have been recently informed that I need to use ojdbc14.jar and equivalent classes as we are developing in a jdk1.4 environment.
    Now I have everything working correctly and have no issues with using the classes12.jar within a jdk1.4 environment, but when I switched to use the new drivers the document.getURL() and document.getLanguage() both return "???" as a value and before they were returning values I could parse (in the case of the getURL() call).
    I have done some experimentation and found that if I remove nls_charset.jar from my classes12.jar - I don't get "???" but I do get garbled text that is unparseable so I am convinced the issue is around the charset implementation and globalization process.
    I need help and I really have no idea at this point where to look and what to do? I have searched and queried every place I can and tried numerous variations but I still end up with "???" from those calls when I use the jdk 1.4 drivers?
    Can someone please help or push me down another path?
    Guy

    user472953,
    It's the driver. Try using "nls_charset12.jar" in your common/lib directory. I'd upload mine if I could, but you should be able to find it somewhere on oracle.com (hopefully).
    Good luck,
    - Stephen

  • Phone signal "searching" message and cut off during calls

    Phone calls

    I'm sorry for misunderstanding you, but you said she went to the Apple store and the third time she bought a new phone. Did the new phone work then? Is the issue still persisting on the old device? That's where I'm confused. Did she get the device replaced or just buy a new phone and the problem is still happening on the old device.

  • Ghost calls, auto answer machine and static interference during calls.

    Hi I have so many issues since I joined EE network. It's my first time with EE and the experience so far has been a very disappointing one.
    Don't know where to begin.
    The figures below are average number of times.
    Static interference - 6 out of 10 calls will experience a static interference. Even after few immediate attempts
    Ghost call - 8 out of 10 calls will experience what I call are ghost calls. It's when I call someone it's dead silent, no ring tone but on the screen it shows the call has been received and the timer is on. Really annoying When I have to reach that person immediately. It takes several attempts before the call actually connects.
    Auto answer machine - this ones not just annoying to me but the caller whose attempting to call me. It's embarrassing too.
    8 out of 10 callers have been complaining to me that they're calls kept on going to the answer machine. But during that time my phones been free and showing full coverage . I know this because I experimented few times where I got the caller to call me after meeting them in person few mins after the issue.
    Recent issue that occurred has me monitoring my data usage.
    I connected my phone to iTunes on my PC and I noticed it turned on something with a chain link on top of my iPhone screen. I didn't take much notice of it thinking it's probably because I connected to my PC. Couple of hours later I receive a message from EE informing me that I used up 80% of my data. That's when I realised it turned on my personal hotspot. But who was connected to it? I don't remember turning it on and my PC was connected to the router via Ethernet cable. Wifi dongle was disconnected from my PC so it wasn't the PC using up my data. Now I'm having to worry about using all my data before my monthly reload I got another 24 days left before my next reload, which is a long time because I need my data for the line of work I'm in.
    I never experienced any of those issues with my previous network provider. Wishing I haven't changed now.

    Hi 
    Welcome to the EE Community!
    Sorry to hear you are experiencing these problems. I had the same kind of issues when I got my first iPhone 5 and totally understand how frustrating it can be.
    The issues you have described sound like a mix of both network and device issues.
    Have you had a look at our Coverage Checker to see what the signal is like in your area?
    What model iPhone are you using?
    Thanks. 

  • Microphone doesn't work on speaker, or during calls.

    AT&T, OS 6, Iphone 4.
    Microphoen doesn't work in phone calls, or speaker phone mode. Interestingly, it doesn't work either in my call when connected via blue tooth, where the microphone is actually part of the car's bluetooth system. Furthermore, the microphone works in Apps like Voice Memo Recorder, and Dragon Dictation.have a fix?
    Has anyone experienced this? I have not "restored" the phone, yet as I am unsure of what I might lose and need to backup before doing so.
    Thanks, in advance for your help!

    Good point Tik on my Razr I had similar issues and I cured the issue by simply power cycling and as soon as my Razr came back on and settled I power cycled it again that what helped my little guy.. and make sure to check all your sound settings b33

  • IPhone 6+ Dims and Brightens Randomly During Calls

    When I'm on a call on speaker, with the phone just lying on a table, the screen will go from bright to dim on its own after a period of time (no surprise there -- my old 5 would do that too).  But then after a few seconds, the screen will brighten back to normal again.
    The interval between dim to bright seems random.  It appears to have no connection with the ambient light in the room, the proximity sensor, or motion.
    Anyone else notice this?

    Yeah man, i've got the exact same problem and had it a few times! i've fixed it once but now can't remember what i did lol.. have you replaced the volume/headphone flex? because that makes sense... otherwise it could be the sim card? please let me know if you have any luck

  • Sound and micro off during calls but not for applications

    People can't hear me, i can very hardly hear them, the update to 5.0.1 did not change anything

    Hey googlymoogly66,
    Thanks for using Apple Support Communities.
    Sounds like the sound works sometimes and then stops. So since it only affects some application and not everything it may be a software issue.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Have a nice day,
    Mario

  • Camera turns off and on and freezes me during calls any help?

    The green light will usually turn off randomly and repeatedly and then come back on after like a few seconds and ill look at myself and ill be frozen until it comes back on. Anybody know how to fix this or is this how all macs are. Really dissapointed with this purchase so far already had to get it fixed twice because and i quote "im not allowed to move a mac while its on, as in walking around". And the fan noises and the constant bs camera freezing. Anyways all im worried about is how to fix the camera.

    Try these steps:
    http://support.apple.com/kb/ht2090
    It is not normal that the camera goes on and off by itself. Is there a specific app you are using when this happens?
    You are allowed to use Macs while on the move - that is why they are notebooks - so whoever told you that is wrong. Also fan noises are stronger when using intensive programs that use Flash.

  • IPhone 4 Mic & Speaker not Working during Call

    Hello All,
    I have iphone 4 and it was locked on at&t and was running ios 5.0.1, now i have unlocked my iphone and now i am using ios 5.1.1. But i have a problem, when i call someone i cant hear anything "no dial tone sound and no sound during call" & speaker mode is also not working and nor the person cant hear my voice. I also tested on my another phone but same problem.....
    So can you tell me is this a hardware problem or software problem ?? and yeah i can record voice memos and i can listen my memos with speaker on and off
    Waiting for reply....

    Do the basic troubleshooting steps described in the User Guide:
    1.  Reset iPhone (no data loss): Press both home and power buttons for at least 10 seconds, releasing when the Apple logo appears.
    2.  Restore in iTunes using a backup
    3.  Restore in iTunes as new, without using a backup.
    If restoring as new doesn't help, there is a hardware failure.

  • Iphone 5s Echo and Swoosh noises during active call

    Hello All,
    I purchased a new iphone 5s around a month back and I consistently get echoes of my own voice and swoosh noises during call. This happens irrespective if I make the call or an incoming call is answered, from any location like my room and on the street (No tunnels, elevators, etc). I originally thought it was because I receive notifications like texts or if my cheek touches the display, but I hear this noises and echoes even if I am on headphone (both apple and other branded headphones). Is this is a known issue, if so how do I resolve it ?
    Thanks

    Flip the silent switch on the side of the iphone.

  • Iphone 4. Microphone fails during calls

    Iphone 4. Microphone fails during calls

    Yeah -- I'm getting this myself.  Did you ever find a solution?
    Here's some more information:
    Microphone DOES NOT work when:
    I make a call via carrier (typical method)
    I receive a call via carrier (typical method)
    Microphone SOMETIMES works when:
    I make a call via carrier (typical method), and then cuts out a few minutes during the call
    I receive a call via carrier (typical method), and then cuts out a few minutes during the call
    Microphone DOES work when:
    Using recording apps (voice memos)
    Make calls via data apps like:  Skype,  MagicJack.  I can use these apps to call/communicate with the person on the other end of the call without ANY issues.  Microphone does not cut out at all.  Works perfectly.
    Tried To Solve Using The Following (To no avail):
    Plug in / out headphones/mic.  This is functioning properly.  When I take out headphones/mic, and use the volume toggle, it does not show headphones as being plugged in.  Looks typical, and I can hear sound coming out of the speakers.
    Tried using the external "speaker" option during calls.  This had no effect.  The speaker icon highlights, and appears as normal, but they still cannot hear me talking into the mic.
    Switching Carriers in Settings > Carriers.  I tried hopping onto another carrier  (by disabling Auto), then moving back to my own Carrier.  Something to note... THe other carrier didn't allow me to fully connect to it.  I was not able to make a call on another carrier (I suspect this is normal).  I then re-enabled Auto.  Nothing helps.
    Reboot, Toggle Airplane-mode
    Latest Update (5.0.1)
    Sync with iTunes
    Summary Of Problem:
    This is seemingly an issue while making / receiving calls through the carrier., but I've seen this problem a lot in other forums.  They've tried different SIM, and carriers, and nothing's helped.   I'll try a new SIM card next, though I don't see it as being a coverage thing what-so-ever.  My data works, and my mic WORKS --- just not during phone calls.

  • IPhone 4 stays lit during calls

    My iPhone 4 stays lit during calls. It causes me to hit the mute, FaceTime and contact buttons during calls. I took my otter box off and it still does this. Can anyone help me?

    This is Proximity Sensor problem. This sensor is located on the Power Button Flex Cable. If the iPhone front screen has been replaced this is known problem. Restore iPhone with current iTunes on computer.

  • IPhone 5c IOS7.0.3, other people can no longer hear me during calls unless I tap into speaker mode and back?

    Hi,
    I'm currently using an iPhone 4S, but my partner has just bought an iPhone 5c. A while ago, before the IOS7 upgrade, my phone would for some reason act as if I had clicked mute during calls. Nobody would hear me, but I could hear them perfectly. The only fixes were to hang up and recall them back, or to switch it to speaker mode and back again. Very annoying. However, after updating my IOS, it suddenly stopped doing this. It was fixed, I was happy, game on.
    But recently, my partners phone which was working perfectly fine before the new IOS7.0.3 update, has developed this problem. Exact same issue, exact same solution. I wouldn't mind so much, but shes bought this phone in the last month, its a brand new phone, new software, new model... It shouldn't still be doing this! Whats worse is that when driving, its very dangerous for her to have to keep switching between speaker and not just to get her phone working. (She drivers with the phone in a cradle with hands free on).
    This issue is... Annoying. I've found that its not exactly a rare thing, and that a lot of people have had it for quite a while, but the only solution I've seen is to open the back of your phone and cover a certain part with paper/cardboard... Not exactly what we want to do is it.
    Does anybody have any advice or a solution to this, as I'm going a little crazy trying to reset everything and fix it!
    Thanks in advance!

    Same issues here. Sometimes during outgoing calls, people cannot hear me at all, even when the signal strength is good. Only solution is to soft reset the phone. A couple of times the person could hear me for the first few seconds of the call then it dropped completely.
    I also experience the issue with the 3G data as you described (I think they are related... i.e., when the 3G data isn't working, the issues with outgoing calls exists too). The phone will just randomly seem to lose it's internet connection, even with full signal strength. Soft reset/toggling airplane mode fixes this.
    I called Apple support; they asked if I was covering the microphone during outgoing calls (as if I'm that stupid). Come on Apple, I have a University degree in Computer Engineering, don't insult my intelligence! They then asked me to restore the phone (which I already did). Next solution they offered me was to replace the phone by sending me a new one first (at a cost of $35), or I could send it back and be phoneless for a week while they send a new one (which is not an option for me). I also put on a $30 Invisibile Sheild so if I exchange it, I already lose that. I believe the issue is not with the hardware, since the microphone seems to work just fine. Given that it is intermittent like this, it seems there's a software/firmware error somewhere that gets the phone into a bad state.
    Very disappointed that the $800 phone I just bought functions worse for phone calls than the Nokia brick I had 8 years ago.
    If anyone has a permanent solution for this that doesn't involve exchanging the phone, please let me know.

Maybe you are looking for

  • 1st generation iPod apps

    I upgraded my 1st generation iPod, but when I click on iTunes app or App Store app, it says that it can not connect ..... What should I do?

  • Recovery from USB media fails in error 10-fc12-0241

    -Got a new laptop t135-s1309. -works great. -created recovery media on usb using the creation utility.  -to test recovery media, I ran recovery from the usb media. -starts and carry's out recovery for a time.  -then error 10-fc12-0241 is displayed. -

  • Aust ipod

    there is no facility in aust itune to download movies, or tv series. can i download movies or tv series from dvd to my ipod?

  • Including Schema owner when generating DDL scripts

    Designer 9.0.4.6 How do i set the option to include the schema owner prefix in the DDL scripts being generate ("generate server model from database") in design editor?

  • Error during deployment writing deployemnt cache

    I get this error every time I try to deploy from JDeveloper to oc4j. Only shutdown and redeploy works. Error instantiating compiler: IO error writing cache: D:\oc4j\j2ee\home\applic ation-deployments\App\Appejb.jar\deployment.cache It might have some