Signaling start and stop of a Business Objects report execution

Hi we are facing the following issues on Business Objects:
When starting a report we would like to signal to the backend database that the report has stared.
When finishing a report we would like to signal to the backend database that the report execution has ended.
Any idears on how this can be hooked into the reports?
Best regards
Jacob Mossin Andersen

What type of report, and what type of signal? Are you scheduling or on-demand viewing?
Need more info.
Sincerely,
Ted Ueda

Similar Messages

Pump Start and Stop?

While making the I/O list, I have identified theDigital Ouput, Port0/line1 as start for the pump and Digital Output, Port0/line1 for stop i.e is two port, lines, of the pump...but while making the software, VI, I am using the verticle toggle switch to consider the start of pump as up and stop as down of the toggle switch which works at one DO port line.
How can I give two signal start and stop to the pump?
Should I use two buttons? Which ones?
I am confused. Please let me know.

What do the two DO lines do? Ultimately there will be one device (contactor, relay, thyristor, ...) which has two states (like a single boolean) to turn the pump on and off. How do the two digital lines connect to that control device? Are they inputs to some kind of electronic pump controller or are they simulating the standard industrial Start and Stop buttons via relays? Something else?
You can use the single switch on the front panel and the boolean Not function to create the two lines for your DO.
Lynn

How to append data in same log after start and stop signal express

how can i append my data to the same log file after starting and stopping the signal express ? Is there some option to do this. After start/stop it always makes a new log file. How can append datat to the same log file.
Thanks in advance.
Munir

Hello mbhatti,
I founded a KB which seems do describe the way to solve your problem.
Appending Data to the Same File when Logging in LabVIEW SignalExpress :
http://digital.ni.com/public.nsf/allkb/C38AEE499D5CC8C6862572CF006875D2?OpenDocument
I hiope this will help you
Regards
Florian Abry
Application Engineer Group Leader
NI Germany

How to use counter as an start and stop trigger in 6009

Hi ALL.
I'm using USB 6009 as a subject of to acquire data.
I would like to know on how to use the counter digital input as a start and stop trigger.
The acquisition will only start when the first pulse of the digital signal is received and it will stop when the desired number of pulse is received.
I was trying to use the VI as attachment as my reference. However, after tried, the VI is not working for USB 6009 as the counter input cannot be used as a trigger.
I would be happy if anyone could suggest me some ideas on this matter.
Thanks.
Attachments:
DigitalStartandStopTrigger.vi ‏32 KB

Hi Kate.
Thanks for your response.
For your information, I've design my VI using the counter method. However, it doesnt work well. Please see the figure below. The file also attached with this reply.
At first, the first counter from Device 2 will start counting. If the counting equal 0, then the acquisition for Device 1/AIO also the counter of Device 1/ctr0 begin acquiring data and counting the edges respectively.
However, when I did the test, it doesn't work as wanted. It is happened because when counter of device 2 in not equal to 0, the acquisition for Device 1 not happened as it will go to false state.
Is there anything that someone could suggest on how to start the acquisition for device 1 only and if the counter of device 2 is equal to 1. I would like the acquisition of device 1 start only when the counter of device 2 is equal to 1. I cannot use the trigger as 6009 is not support for it.
-Fird-
Message Edited by Fird on 07-02-2009 04:28 AM
Attachments:
Acquire Data Test 4.vi ‏27 KB

How to start and stop an embedded sound

I'm putting a sound of a cat purring in the intro to my animation. I've been asked to make it possible for viewers to turn the sound on and off with buttons. I can do it with an outside sound file by using URLRequest.
Is there a way to start and stop the sound if it is embedded in my library? If so, can someone give me that script.
TIA

Hello mnemo,
You can use your digital signal to stop your generation with the following property node
DAQmx-Triggering
Regards.
Jean-Baptiste C.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Téléchargez dès maintenant toutes les présentations techniques !

Starting and Stopping Repository Mgr Service

Hello All,
I am running Forte 3.0.D.0 on Windows NT 4.0. At night, I run batch files to backup and clean the repository.
With previous versions of Forte (before 2.H) my scripts simply did an rpstop, rpcopy, rpclean and finally a rpstart to start the repository again. This worked great.
Now, however, I am running the Repository Manager as an NT service, so I can no longer run rpstop or rpstart (rpstart does not start the Repository Manager service).
One solution I have found is to use Net Stop and Net Start to stop and start the Repository Manager service, so my script looks something like this:
rpcopy...
net stop "Forte Repository Manager 3.0.D.0"
rpclean...
net start "Forte Repository Manager 3.0.D.0"
This seems to work fine most of the time, but occasionally the service won't stop or start (like when a workspace is open). My questions are:
1) Are there any other command line processes that people know of to start and stop a service?
2) What is Forte's recommended process for starting and stopping the Repository Manager service in a script?
Thanks for your help
John Bruning
IBIS Consulting Inc.
www.ibis-consulting.com

Your object could actually bind to a port using serverSocket.accecpt() and when a connection comes in, it exists.

Tree node images changes.. with start and stop button

I create the animator extends JPanel, which start and stop can be controlled with Swing Timer. It works fine with animation control over the panel.
Now, I have a tree with each image at each node.
when the start button clicks, one node image should be animated.
It is implementable. If animation.gif would have worked, I did't have to do this, but animation gif has fatal error with time interval.
any words would be appreciated. Thanks =

Damn !
With version 1.2.1 I think you'll have to create a new class that extends PositionPathInterpolator and add a pause() anr resume() method to it.
i suggest something like:
public class MyPositionPathInterpolator() extends PositionPathInterpolator {
// add some constructors if necessary
private float pauseAlphaValue = 0;
// override computeTransform method
public void computeTransform(float alphaValue, Transform3D transform) {
   float newAlphaValue = alphaValue + pauseAlphaValue; // calculate new alpha value
   if(newAlphaValue > 1) // modify it if it is out of bounds
      newAlphaValue -= 1;
   else if (newAlphaValue < 0)
      newAlphaValue += 1;
   super.computeTransform(newAlphaValue, transform); // computeTransform with the right alpha value
public void pause() {
   this.setEnable(false); // it won't compute transform anymore
   pauseAlphaValue = this.getAlpha().value(); // retrieve current alphavalue
public void resume() {
   pauseAlphaValue -= this.getAlpha().value();
   this.setEnable(true) // restart computing transform
}Now you invoke pause and resume methods on your myPositionPathInterpolator object when user clicks on the buttons.
Of course it is a trick and it will work only with increasing alpha.
c ya
GnG

Starting and stopping triggered samples

The ESX24 Sampler claims to be a plug-in that functions exactly like a sampler should. Previous to Logic Pro 7, I used a SP-606 sampler that had three different ways a sample could be played:
1. drum - this function played the sample as long as the button (or note) was held down then stopped playing once released
2- trigger - this started the sample and let it play until the end of the entire audio region
3- loop - this looped the sample based on the specified start and stop points.
However under the second function, trigger, you could trigger the sample to start and stop and restart and stop every time you hit the sample button or sent a note.
Does logic have this function anywhere in the ESX24?
for instance if i had a 15 second long sample and sent a midi note from a controller to start it...how do i stop it and restart it at will?
the only functions I see available in Logic are the 'drum' function (where the sample releases and stops as long as you hold down the note) and the trigger function (but in Logic a second trigger does not stop the sample ----
it triggers a second sample to play again --so that multiple samples are playing simultaneously)
Any help would be greatly appreciated.

Start Oracle RAC Database and Listener
Follow Oracle Database Documentation on starting and stopping Oracle Database
To ensure Oracle Warehouse Builder Runtime Services
Log on to the Database machine Platform as the runtime repository owner.
Run the ORACLE_HOME\owb\rtp\sql\servie_doctor.sql script.
Note: The runtime repository owner is dwh_ws_owner and it is database user.
Starting Oracle BI Infrastructure
•     Login to Oracle BI Server
•     Navigate to location /home/oracle/..
•     Execute Script startBI.sh for Starting Oracle BI Services
If you have to start Services Manually -
Order of Starting Processes on BI Servers
•     Oracle Business Intelligence Server
•     Oracle Business Intelligence Presentation Services
•     Oracle Business Intelligence Scheduler
•     Oracle Business Intelligence Cluster Controller
Use the script in sequence with parameter start
•     Navigate to location /home/oracle/biserver/OracleBI/server/bin directory
Example:
•     ./run-sa.sh start
•     ./run-saw.sh start
•     ./run-sch.sh start
•     ./run-ccs.sh start
Stopping Oracle BI Infrastructure
•     Login to Oracle BI Server
•     Navigate to location /home/oracle/scripts
•     Execute Script stopBI.sh for Stopping Oracle BI Services
If you have to stop Services Manually -
Order of Starting Processes on BI Servers
•     Oracle Business Intelligence Cluster Controller
•     Oracle Business Intelligence Server
•     Oracle Business Intelligence Presentation Services
•     Oracle Business Intelligence Scheduler
Use the script in sequence with parameter start
•     Navigate to location /home/oracle/biserver/OracleBI/setup directory
Example:
•     ./run-ccs.sh stop
•     ./run-sa.sh stop
•     ./run-saw.sh stop
•     ./run-sch.sh stop

Re: Starting and Stopping Repository Mgr Service

John,
Try this
Shutdown 0
from the Escript.
Herman Magno
Credit Lyonnais, NY
Hello All,
I am running Forte 3.0.D.0 on Windows NT 4.0. At night, I run batchfiles to backup and clean the repository.
>>
With previous versions of Forte (before 2.H) my scripts simply did anrpstop, rpcopy, rpclean and finally a rpstart to start the repository again.
This worked great.
>>
Now, however, I am running the Repository Manager as an NT service, soI can no longer run rpstop or rpstart (rpstart does not start the Repository
Manager service).
>>
One solution I have found is to use Net Stop and Net Start to stop andstart the Repository Manager service, so my script looks something like
this:
>>
rpcopy...
net stop "Forte Repository Manager 3.0.D.0"
rpclean...
net start "Forte Repository Manager 3.0.D.0"
This seems to work fine most of the time, but occasionally the servicewon't stop or start (like when a workspace is open). My questions are:
>>
1) Are there any other command line processes that people knowof to start and stop a service?
>>
2) What is Forte's recommended process for starting andstopping the Repository Manager service in a script?
>>
>>
Thanks for your help
John Bruning
IBIS Consulting Inc.
www.ibis-consulting.com

Your object could actually bind to a port using serverSocket.accecpt() and when a connection comes in, it exists.

Web Sharing Start and Stop routines...

Does any one know where to find the actual start and stop methods that get executed when you turn on/off Personal Web Sharing in System Preferences. A long while back I found where those were to do some custom event upon web sharing start-up/shut-down, and now I can't remember where those are located.

http://discussions.apple.com/thread.jspa?messageID=6792272&#6792272
answered my question, which helped me to find an error:
sudo /usr/sbin/apachectl start
Syntax error on line 241 of /etc/httpd/httpd.conf:
Cannot load /usr/libexec/httpd/modhfsapple.so into server: (reason unknown)
/usr/sbin/apachectl start: httpd could not be started
it appears that this Apache module: modhfsapple.so file is missing. (It was in the locate database, but the file is now gone) I recently had some disk errors and restored from a backup drive, but maybe the backup itself had been missing some of the same files. Bummer.
Now I am wondering if I have to reinstall 10.4 from the DVD or if I can somehow repair/reinstall just the Apache modules to get Personal Web Sharing up and running again?
It's probably safer to reinstall the whole OS, since I don't really know what other bits and pieces might be missing. I have one Intel Mac and one PPC Mac, so I don't think I could safely pilfer the missing shared object module from one to the other.

Action Script 3 code not working for start and stop button?

Ok so I have this simple animation I created of a circle that moves from one side of the stage to the other. I have added a new layer and called it buttons. On this layer I have added 2 buttons. One for start and another one for stop. The purpose is to get my circle to move from one side of the stage to the other but be able to use my buttons so that I can start and stop the animations at random times during playback. I fixed all my compiler errors now the problem lies in that everytime I click the start or the stop button I get an output error. I have a 3rd layer in which is titled actions and this is where all my code is posted. I removed that layer and placed my code in the first frame of the buttons layer to see if this would change anything but I still get the same output errors. So I just added back my actions layer. What could I be doing wrong? I have made sure to name all my movie clips and buttons correctly and I even added an instance name to them.
Here is my code and the errors I am getting when I press the play and stop button on test-
start_btn.addEventListener(MouseEvent.CLICK, startCircle);
stop_btn.addEventListener(MouseEvent.CLICK, stopCircle);
function startCircle(e:MouseEvent):void{
    circle.play();
function stopCircle(e:MouseEvent):void{
    circle.stop();
green_btn.addEventListener(MouseEvent.CLICK, greenCircle);
red_btn.addEventListener(MouseEvent.CLICK, redCircle);
function greenCircle(e:MouseEvent):void{
    circle.play();
function redCircle(e:MouseEvent):void{
    circle.stop();
Here are my output errors-
TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at exercise2_fla::MainTimeline/redCircle()
TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at exercise2_fla::MainTimeline/greenCircle()

ok so my circle is my movie clip and it is titled circle and the instance name is circle. Am I supposed to change MovieClip to circle? I put the code at the top of my actions script but for some reason it did not work. I did change play to stop and it got the movie clip to stop when I do test movie but my buttons still do not work. So I changed stop back to play. Strange.
I did try changing MovieClip to circle but that did not work so I did Circle with a capital C and that did me no good eigther.
I meant to add that I did get an error that said- 1180 Call to a possibly undefined method circle.

Start and Stop Trigger using PXI-6120 and DigitalStartAndStopTrigger.vi not working :-(

Hello,
I've been trying for a while now to get my PXI unit to capture a waveform between a Start and Stop (Reference) Trigger using the NI example DigitalStartAndStopTrigger.vi downloaded from the NI website. However, whilst the start trigger and stop trigger seem to be working i.e. the VI runs and stops at the correct times there is never any data read from my DAQmx compatible PXI-6120 card. So I can see the VI is running around the aquisition loop but the Property Node AvailSampPerChan is always returning zero... this has me slightly puzzled. I thought this might just be a driver issue so I've updated my box to the following software versions (see below) and installed the latest drivers e.g. DCDNov07.exe (also from the NI site) but nothing has changed.
my software as of now.
Labview 7.1 (with the 7.1.1 upgrade applied)
Max 4.3.0.49152
DAQmx 8.6.0f12
Trad DAQ 7.4.4f7
before I updated I had the same problem but with the following versions:
Labview 7.1 (with the 7.1.1 upgrade applied)
Max 4.2.1.3001
DAQmx 8.5.0f5
Trad DAQ 6.9.3f4
So to cut a long story short I still have the same problem with the triggers... does anybody have any ideas what is going wrong?
To add insult to injury it the traditional DAQ example ai_start-stop_d-trig.vi was almost working correctly before I did the upgrade. It had the strange behaviour of capturing the AI0 channel but on the wrong edges (e.g. if I set Start on Rise and Stop on Fall it would do the opposite, Start on Fall and Stop on Rise).
I'm going to leave my box doing a mass compile over night but i'd really like it if someone could suggest a solution or point me in the right direction.
Many thanks,
Mike

Hi Graham
I'm out of the lab today but I'll try and answer your questions as best I can...
1) What are the values you have set for Buffer size, Rate, samples per read and post trigger Samples?
At the moment I have all the values (e.g. sample rate, buffer size etc) unchanged apart from the ones I mentioned in my previous post (see above). I have in the past played around with changing the buffer sizes and rates in the example VI but as this appeared to have no effect on the behaviour I now have them setup as in the download.
2) Does the program end after the stop trigger is implemented?
Yep, if I toggle the trigger line high then low I see the program exits the read loop and the VI stops running as expected.
3) Lastly can you give me the details of triggering method. Are you
using a digital train of users set digital pulses? how long is the
program running.I'm using the WriteDigChan.vi to manually toggle the first digital line of the PXI-6733 card which is wired directly to PFI0 of the PXI-6120 card. Generally, I just start the VI running and then toggle the line high, wait a couple of seconds and then toggle it low.
To me it all looks like it should be acquiring samples but as I said yesterday it just refuses to fill the buffer with any data (and hence no samples are read).
Any ideas? and thanks for you help,
Mike

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O.

Need help getting Tomcat 5.0.28 to start (and stop, eventually)

Hi!
I am such a newbie to the Terminal and writing scripts, so please forgive my naiveté. I have successfully installed Tomcat in my /usr/local directory, but I am having trouble creating files to start and stop Tomcat, per the instructions on the following page:
http://developer.apple.com/internet/java/tomcat1.html
I've followed the directions but continue to get the following error after I execute ~/bin/start_tomcat.
-bash: start_tomcat: command not found
My file contains the following code:
#!/bin/sh /n
export CATALINA_HOME=/usr/local/jakarta-tomcat-5.0.28 /n
export JAVA_HOME=/usr /n
$CATALINA_HOME/bin/startup.sh /n
If anyone can help me, I would really, really, really appreciate it!
Thanks!
PowerBook G4 12" Mac OS X (10.4.5)

Why are there all those "/n" there? Either you or the place you copied from has the wrong slash. But still, it's wronger than that to have them at all: "\n" means a newline (i.e., press "return") not the actual "backslash en" characters. Sometimes people post code with those \n visible: by making it explicit where a line-break should be, one doesn't have as much trouble when a web browser reformats the text and puts line breaks where they don't belong.

Report on active sync actions (like starting and stopping the sync)

Is there a way to report on who stopped or started an active sync? I'm guessing it has to be stored somewhere, but I can't find it.
Thanks!

Hi Smit,
I believe you are talking about FMS AWS instance and you may be using a centos 4.0.2 instance AMI or lower?
Well ... earlier, options for stopping a centos AWS image was not available, but recently they are there in place, so I suppose if you use a new centos 4.5.1 AMI then probably you can start stop the aws instance on yuor will. Give ut a shot and let me know.
Regards,
Shiraz Anwar
I again cross-checked and found that you were right, start and stop is not supported there .... an alternative method is to take a snapshots of the runinng instnace and terminate that instance after that, later you can use your snapshot to attach to the EBS volume to run your system again. You may need to use the Elastic IP address, because you wont like your users to update each time you terminate the old instance, and create new instance from snapshot. I have never used it in this way, but this is one of the approach.

Signaling start and stop of a Business Objects report execution

Similar Messages

Maybe you are looking for