Signature Pad not displayed in IP14 (Signature Render Applet)

After completing the setup detailed by Oracle to implement digital signature for non-pharma application (DOC ID 1980192.1 and DOC ID 1911649.1) we are able to paint the signature and save it in Singature Applet but it's not displayed in the Signature Render Applet.
Application Setup: IP14 + (Firefox or Chrome)

Hi,
I have found information below in Doc ID 1911649.1 which seems to be similar with the problem you are facing:
- While displaying back the signature (rendering), signature doesn't display by itself. There is a refresh issue which is handled by bug 18836527- SIGNATURE APPLET DOES NOT REFRESH WHEN ITERATING THROUGH RECORDS IN OPENUI (Implemented in 8.1.1.15_8.2.2.15). The current workaround is to reload the browser manually. After reloading the browser, signature is visible on the UI. The refresh issue has been requested to be fixed through the child Bug 19248616 which has been fixed in Patchset 16.
Installation instruction for Patchset 5 in Doc ID 1614310.1 has information below:
IN THE OPEN UI APPLICATION, THE SIGNATURE APPLET DOES NOT REFRESH AS USERS SCROLL THROUGH RECORDS
20204194
Please confirm if you have applied Patchset 5 in your environment.
Thank you,
WSiebel

Similar Messages

  • Signature image not displaying in actual signature.  Preview shows it though???

    Hi, I am brand new to using Adobe and want to use for electronic signatures to decrease paper
    and increase effeciency.  I was able to use help to get it to work with displaying my name.  I have tried to edit the signature to display an object , a file that displays my handwritten signature.  The preview shows that I have attached it appropriately, but when I try to sign a document it continues to display my name instead.  I have tried several times, starting over.  Attaching .jpg then attaching it as a .pdf.  The preview continues to show what it will look like, but the signature continues to default to my printed name for some reason.
    HELP the Newbie Please.

    You are best off creating a digital signature and if you want using the signed signature to display with your digital signature you can. When you just have an image that is pasted on top of the pdf, it is really mostly an annotation, not nearly as useful as a true digital signature. You can create a self-signed digital signature or you can purchase a digital signature that can be attested to by an outside authority. It is your choice.
    This may be a good place to start reading about digital signatures: http://acrobatusers.com/tutorials/digital-signatures-pdf-acrobat

  • We have Topaz BSB signature pads not recognized in virtual environment

    I'm wondering if anyone else is having this problem. Windows 7 recognizes the device. Device lights up, captures the signature and puts it on the document.
    If you change the signature pad, the new one won't work. However, if you log in as another user that hasn't had a signature pad associated with it then the sig pad operates properly. 
    My theory is once a user profile has an established sig pad it won't accept another even though Windows registers the device. The program we are trying to use it with is Meridian Link.
    Any feedback on this issue would be appreciated.

    Hello Jack McM,
    About hardware devices not working or not detected issue, please download and run the fix tool from the following KB to diagnose and fix the issues.
    https://support.microsoft.com/en-us/mats/hardware_device_problems
    Additionally, please contact the manufacturer as Rick Dee mentioned.
    Best regards,
    Fangzhou CHEN
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • A Components not displayed in JDialog opened from Applet.

    Hi. I have an Applet from which I am opening a JDialog, that contains a JPanel with some JTextFields. Sometimes half of textfields are not displayed. Does anybody know something about such problem?

    When you say sometimes do you mean sometimes or do
    you mean all the time?sometimes.
    In general when you have a condition that only
    sometimes occurs this is the result of a race
    condition. Assuming that this is something you see
    only sometimes, my guess is that you are displaying
    the dialog (calling setVisible(true)) before you have
    finished adding all the componentsYep. you are 100% right. found it. it was not synchronized lazy initialization called from some callbacks in different threads. ;)

  • Image logo not displayed in the signature in mail

    hi,
    I have a problem which is very very urgent to solve. I setup an account in the application namely mail in the mac system (imac) I am having. The signature I setup contains the text as well as a logo (image). When I send mails from that mac to other mac systems the image appears well but when I send the mail to any PC the image is not there. I tried that image in tiff, gif and jpeg format but still it doesn't appear in the PCs.
    Can please somebody help me out of this weird situation.
    Regards,
    Vandee
    IMAC   Mac OS X (10.0.x)  

    Vandee,
    any complex HTML coding will not be supported by Mail. This is to prevent problems on the receiver side as much as possible, and to keep mails "light and clean".
    But if you insist, have a look at this post, with an extensive description how to work around this.
    http://discussions.apple.com/thread.jspa?messageID=713195&#713195

  • Unable return sucessful validate when using signature pad

    I need to verify that the user signed the form. We are using a signature pad to capture the electronic signature. And then using the code below in a button to validate. If the signature is left blank I do get the message that the "Signature is not valid: signature is blank". But if I complete the signature field I do not get anything back.
    var f = event.target.getField("form1[0].S1[0].SignatureField1[0]");
    // Validate the signature field:
    var status = f.signatureValidate();
    /* signatureValidate method returns one of the following integer validity status values:
    -1: not a signature field
    0: signature is blank
    1: unknown status
    2: signature is invalid
    3: signature is valid, identity of signer could not be verified
    4: signature and identity of signer are both valid
    // Obtain the signature information
    var sigInfo = f.signatureInfo();
    if (status < 3)
    var msg = "Signature is not valid: " + sigInfo.statusText;
    else
    var msg = "Signature is valid: " + sigInfo.statusText;
    // Display the status message:
    app.alert(msg);;
    I have also tried just returning the status using
    app.alert("Signature status: " + status);
    When I leave the signature blank I get "Signature status: 0"
    When I fill in the signature, I don't get the message box.
    Is there another command for validating with a signature pad.
    Thanks,
    Velvet

    try using the status property. This is currently working for me.
    var oState = event.target.getField(("form1[0].S1[0].SignatureField1[0]").signatureInfo().status;

  • When filling a Digital Signature field from a mobile app, signature does not show  Reader or Acrobat

    Scenario :
    1. Receiving a pdf form with digital siganture field.
    2. Signing form using various pdf apps. " PDF EXPERT for iPad/iPhone"
    3. After signing and emailing the document, opening in reader or Acrobat, the signature does not display but the field is gone, as if it was signed.
    * Is reader /acrobat requiring a validation that it is not receiving to show the signature?
    Did verify that the signature shows in Chrome, using chromes default pdf viewer.

    New Feature came in the last update.
    Here is the reference material to disable it:
    Signing with EchoSign
    These preferences allow IT to remove signing options from the product's user interface.
    http://www.adobe.com/devnet-docs/acrobatetk/tools/PrefRef/Windows/FeatureLockdown.html?zoo m_highlight=echosign#idkeyname_1_6294
    Summary table
    bEnableEchoSignDetection
    Displays the Document Message Bar when a blank signature field is detected.
    bEnableFillSig
    Specifies whether to remove the Sign Now panel from the Sign Pane.
    bEnableSignPane
    Specifies whether to remove the Sign task pane button from the toolbar.
    bEnableEchoSignDetection 
    Top>FeatureLockdown>Signing with EchoSign>bEnableEchoSignDetection
    Data type
    boolean: DWORD value > REG_DWORD
    Default
    1
    Version #
    11.0.03
    Lock Path
    HKLM\SOFTWARE\Policies\Adobe\(product name)\(version)\FeatureLockdown\cServices
    Summary
    Displays the Document Message Bar when a blank signature field is detected.
    Details
    When enabled, the product tries to detect if a document may need to be signed. If the words "Sign" or "Signature" are detected next to any line, a document message bar appears with an "Open Sign Pane" button. Possible values include:
    0: Don't detect signature fields.
    1: Do detect signature fields.

  • Topaz signature pad and Reader 10/11

    Background:
    I am working on the County Attorney's Case Management Project which will make all court documents filing electronic and as part of that process we will require all signatures on court documents to be digital only.  We currently have Adobe integration with our software and will be using Adobe to sign the documents.  Currently most County Attorney's offices user Reader not Acrobat.
    Question:
    We are using a Topaz Systems SigLite 1x5 LCD Signature Pad as our test/training signature pad.  In Reader when we try to sign we are not getting a signature capture window, instead we are only able to use the default Adobe signature options of drawing, text, or inserting an image.  Is there anyway to get the signature capture to appear for use when signing?  (assuming all of the security properties for the document are set properly, which I have verified) I can get this to work perfectly in Acrobat. I'm trying to make the process of signing all of these docs for the attorneys easy and with the fewest amount of keystrokes and clicks as possible.
    Thanks!
    --erika

    Check to make sure that it's actually available in Reader. I think the following should show it: Help > About Adobe plug-ins
    There is also a user preference that can affect its availability: Edit > Preferences > General > Use only certified plug-ins
    If this doesn't help, check to make sure the plug-in is actually present in the plug-ins folder for each Reader installation.
    If you can confirm the the plug-in is correctly installed and loaded in Reader and it still doesn't work, I'd then contact Topaz.

  • Adobe forms issue with signature pads

    Hi everyone,
    I am new to and just joined  this forum as I never had to until this point. I am having some strange issue with adobe forms and using signature pad.
    I have a form built using adobe X. I am using Topaz signature pad to have a digital signature in my form. My application (which was built on Progress 4GL) opens up this form using rich text editor. Most of my clients remote login to use the application. Every now and then my clients complain that whenever they click on the signature field on the form to open up the signature pad window, it kicks them out of the whole application. This happens so randomly that they can't predict when it occurs. I logged each and every lines on my code to see if there's any issue with the codes but they all execute fine. And I can't log after the form is open as adobe takes the control and they handle the  communication with signaute pad. So far I have checked if there's any memory leakage that would kick me out and it's fine. And I think there's no driver issue as this happens randomly. A client who gets kicked out 1st time if tries the 2nd or 3 rd time following the same steps and same form, can successfully gets the job done.
    Have any of you had faced similar issue. If you have any solutions or ideas that would be a great help to me.
    Thanks!!
    Him

    Updates: Just found out that this issue rises only to the clients using Wyse terminals. Has anyone had any issue using Adobe forms and Wyse terminals?

  • UIX page not displaying data from VO's

    I have an application where my users log in by passing a username/password to a client method in my application module. The Webusers View Object has a view link to the Customers view object, which has a view link to the Orders view object, which has a view link to the OrdLines view object, like this:
    WebusersView
    --CustomersView via WebCustViewLink
    ----OrdersView via CustOrdViewLink
    ------OrdLinesView via OrdOrdlinesViewLink
    I've run this Application Module through the tester and I can see data via all the View Links.
    I have the following code in my login() script:
    w = getWebusersView();
    w.setWhereClause("login = '" + username + "'");
    w.executeQuery();
    I've stepped through the login() code and it works correctly. If I understand BC4J correctly, then all of the View Links should fire and coordinate the data from Customers, Orders, and OrdLines when this query executes successfully.
    I created a UIX page and did a drag/drop of Orders to the page as a read-only table. I found the Orders table by expanding the Webusers entry in the Data Control palette, then the Customers entry below that, to grab the Orders entry there. I think this means that it will follow the WebCustViewLink to get the Customer that goes with the Webuser, then the CustOrdViewLink to get the Orders for that Customer. Is this correct?
    When I try to run this and display the table, I get no records. I know for a fact that records exist under the Webuser username I've chosen.
    What is wrong? Why doesn't my UIX page display the appropriate Orders based on the Webusers->Customers->Orders view links?

    If there, try removing the $. at the beginning of the binding that gets puts there if you select the item from the pop up list.
    I have a text field that is read only and bound without the $. that was working fine for displaying data. I have a drop down that had the $. and was not saving. I removed the $. and now it is getting saved to the XML. However, it does not display on the next render of the form.

  • Master page fields not displaying data from XML file

    Hi,
    For some reason if I a add a field on the master page, when previewed it does not display the xml data assigned to the field.
    I have a work around, but it looks messy and would prefer to resolve the problem correctly.
    My work around is to create another field with the same name in the "Design view" layout, and change the presence to invisible. I don't even have to link it to the xml data, simply select Global as the default binding.
    Any ideas what I have done wrong, I assume it's a simple setting somewhere but I have no idea what it is.
    Thanks
    Russell

    If there, try removing the $. at the beginning of the binding that gets puts there if you select the item from the pop up list.
    I have a text field that is read only and bound without the $. that was working fine for displaying data. I have a drop down that had the $. and was not saving. I removed the $. and now it is getting saved to the XML. However, it does not display on the next render of the form.

  • Flash Player linux, grey box issue (youtube vids and some applets do not display)

    I posted this question on my distro-specific forum as well as linuxquestions.org, however it appears to  be a unique problem, so here it is:
    When viewing videos on youtube.com, most other websites, and when trying  to run certain flash games, the flash applet will not display (though  the audio will play). Instead of displaying the flash applet, there  will be a grey box where the flash video or applet would normally be.
    This problem occurs on Firefox and Chromium, but not on Opera.
    My Specs are as follows:
    Distro: PCLinuxOS 2010 (32-bit)
    flash-player-plugin: 10.1-2pclos2010
    firefox: 3.6.6-1pclos2010
    swfdec has never been installed (to my knowledge)
    I did a lot of investigating about the problem but have turned up no  solutions thus far. Here are my results.
    Flash videos and applets which allow  access to the settings menu (like youtube played from their website) do  not display, however flash videos and applets which do NOT allow access  to the settings menu (including youtube videos embedded in other  websites) WILL display.
    Reinstalling flash-player-plugin and firefox through synaptic does  not solve the problem (though note that PCLOS works with rpm files, not  deb files. apt4rpm does not support the remove --purge operation,  however reinstalls are said to overwrite custom configs with stock  ones.)
    Creating a new firefox profile and/or starting FFox in safe-mode  does not solve the problem
    Creating another user and running FFox from that user will  properly display flash videos
    Comparing default plugins between my main user and new user shows  that there is no difference. So this likely rules out a defective  extension or plugin binary.
    Deleting ~/tmp/plugtmp* folders when FFox is closed does not solve  the problem.
    Removing the ~/.macromedia and ~/.adobe folders does not solve the  problem. (have checked permissions between the new test user and main  user, and they are equivalent)
    Downloading libflashplayer.so from the Adobe website and copying it  to /usr/lib/mozilla/plugins has no effect on the problem.
    I'm thinking that there might be somewhere else that flash stores  configurations for my user, and that maybe the settings there are  corrupted and would need to be purged. However frantic googling has  turned up nothing useful so far.
    Does anyone have any suggestions for me?

    The problem, at least in my case, was QtCurve's opacity. If I have opacity set to less than 100%, flash would not display for sites like Youtube and Vimeo, but worked elsewhere.
    The solution for me was to go into qtcurve's settings, and put npviewer.bin in the application exceptions section for window and menu opacity. Doing that, I was able to keep my transparent menus, and also use flash everywhere.
    You can find out what the application name is by launching your browser of choice in a terminal with qtcurve debug turned on, like so:
    QTCURVE_DEBUG=1 firefox
    If you watch through the lines that start with "QtCurve" you'll see "Application name". Look for the one that shows up when you try to load a video. In my case it was npviewer.bin. In yours, it might be nspluginviewer or something else. If you add an exception for that specific application, you'll fix your problem without having to compromise on your theme.

  • Images Do Not Display on Signature Reply Emails _ Outlook 2010 Professional

    I created a company signature which display fine when sent, however when replying to an email the signature shows up with out any of the images.  There are simply blank squares where the images should be displaying.  Can anyone help me resolve
    why this would be happening?
    *Would the device (i.e. iPad) one is viewing the email on be the reason for the issue?
    Thanks,
    Julia

    Hi
    As per the information and details provided by you, outlook 2010 not showing image in signature during replying emails, to solve this problem please follow these steps:
    You mentioned that you are using a device, i.e. iPad.
    Mobile device supports only Plain Text and that’s why the signature image is not showing in your emails.
    If your picture contains crucial information which you really want in your signature. You can
    customize your Plain Text version of your signature to include that information in a typed form instead of as a picture.
    HTML format is capable of displaying different kinds
    of font style as well as graphics like a logo.
    You can set the email format on the
    Format Text tab of an email message window in Microsoft Outlook 2010.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G 

  • HTML Signature with logo does not display when read by clients

    I have had this problem for a while now. I am using 10.5.6 and Apple Mail to send all of my emails. I have only one signature for my business email account which is a GoogleMail pro account. I have set up a signature to display my business logo which is sent with every email sent using Apple Mail through the business account with Google.
    It seems that all of the emails read by clients only show the text in the signature and not the logo??? This is infuriating as the message should display fine. Is Apple Mail incapable of sending signatures with logos? I previously sent message from Google in Safari but Google do not yet allow you to create signatures with logos, which is why I thought Apple Mail would be able to simply do this.
    Can anyone suggest a fix or recommend a decent Email Application that will do this. Is Thunderbird any good?

    Well, note that there is no e-mail client that can ensure that your logo will show up in a message, because the recipient controls how e-mail displays. Some people will have HTML display turned off, which means only a plain-text version of your message will be seen. Other people's clients may not show attached images inline. And if the logo is not attached, but is located on your web site and linked to from the e-mail, most e-mail clients have an option to ensure that such images are not loaded. (The reason: this is a common tactic used by spammers to verify addresses... if your e-mail client tries to load the image that is linked in their system to your e-mail address, then they've hit a good address and will start hammering it hard.) Thus, you need to make sure your signature is acceptable in plain text, since no matter what you do, that's all some people will see.
    That said, go to Edit -> Attachments and make sure the Always Send Windows-Friendly Attachments option is checked. This should ensure that any images in your e-mails will be readable to Windows clients.

  • HT2480 My e-mail, exchange account, on iphone, displays an out of date signature.  My Outlook displays the correct signature but this does not appear to have replicated to my iphone.

    My e-mail, exchange account, on iphone, displays an out of date signature.  My Outlook displays the correct signature but this does not appear to have replicated to my iphone.  The standard signature still says "sent from my iphone" which is fine but I need desperately to change the exchange signature as the office address is incorrect.

    I have already tried that and this doesn't work.  The signature is pulling incorrectly from exchange but I don't know how.

Maybe you are looking for