Significance of Good Receipt with UCC
Gurus,
Can You please tell me the significance of Good receipt with UCC in SAP IM. What exactly the business process is?
If you mean UCC is EAN than there is no diff for GR. The UCC number maintianed becuase of Goverment requirements.
Similar Messages
-
Price change for material with Goods Receipt with out Order reference?
hi all,
Our client company have some finished products produced from raw materials. But we are not using Production planning module. So in MM we are receiving these products with Goods receipt with out order reference(521).
The issue is, the price for this product will change monthly. This new price will affect the existing stock as moving average price calculation.
ex:
Quantity Price Value
Stock balanace 100To 2.00/To 200
Newly produced 100To 2.20/To 220
after the GRN for newly produced is done. The price also need to change as below.
Total 200To 2.10/To 420
This is easy if we receive goods with PO price, as moving average price will updae in the master record.
But here no reference. So only quantity updated with existing price.
So how to achieve the change of price ? Please help.
Thanks,
AravindHi Bijay,
Thanks for the reply. I will use the posting method suggested by you.
but how you are arriving newly produced material quantity & price!
The reply for your comment is,
Every month My client company revise the price of the produced material based on various factors including the
raw material purchase cost.
The price will be fixed for the whole month.
While posting the GRN, the accounts updated are,
Dr Material account
Cr Production Cost
Please let me know what you have asked is answered or not.
So that i can brief more. This is my initial project. So your feedback is very helpful to me.
Thanks,
Aravind -
Cancellation of Goods Receipt with Credit Memo Transaction Issue
Dear SAP Expert and Guru,
Normally cancellation of goods receipt cannot be done when invoice has been issued. Cancellation of Goods receipt can only be done when there is the credit memo being issued in MIRO.
The problem now is that is there any table that can tracked the linkage between Credit Memo and the Cancellation of Goods receipt?
The goods receipt with the invoice linkage can be found in both table EKBE and BKPF. But not the credit memo and cancellation of Goods receipt.
Thank you
Regards
Leonard TanDear Jeya and SAP expert and Gurus,
You are correct, but with the document number, how am I going to get the Cancellation of GR document?
In table BKPF and EKBE. With the invoice number (34*******) then pass it to table BKPF to get the invoice number (52*******),
Then get the invoice number (52*******) pass it to table EKBE to get the Goods Receipt document (61*******).
However, this only can track the transaction goods receipt and Invoice but not the credit memo with cancellation of goods receipt.
Kindly asvise on that.
Thank you
Regards
Leonard Tan
Note : Do not quote previous reply every time,simply reply for member you want to respond.
Edited by: Jeyakanthan A on Jul 8, 2011 3:23 PM -
Goods Receipt with respect to Handling Unit (Transaction u0096 MIGO)
Hi All,
A delivery is created for stock transport order for goods movement from Plant XXXX (Storage Location YYYY) to Plant XXXX (Storage Location ZZZZ).
Handling Units are packed on delivery and delivery is post goods issued from Plant XXXX (Storage Location ZZZZ).
While posting goods receipt (Transaction MIGO) without selecting Via Handling Units system populates the packaging material line item whereas when Via Handling Units is selected (in other words when tried to post Goods Receipt with respect to Handling Units) system doesnt populate the associated packaging material.
Requirement is to populate packaging material line item while posting Goods Receipt with respect to Handling Unit.
Plz guide me.
SatishHi Vatcan,
Chek the Inbound Delivery 1st weather you refer the right PO in it
You can also chek in PO i
1 Me23n Go to confirmation tab here you can see the Inbound delivery quantity
2 Chek which reference document you recived the goods, (i.e You recived the goods with reference to PO or Inbound delivery)
2 Coz if you refer the inbound delivery then syestem will deafult show the inbound quanity
And yes the actual quanity will update in inbound delivery if you refer the inbound deivery while reciveing the goods -
Goods Receipt with respect to sales order
hi,
goods receipt with respect to sales order ,that sales order is prepared with reference to quotation
erroer is
Account assignment cannot be carried out because of different origin no.
Message no. V1134
Diagnosis
The sales document to which you want to refer is based on sales document 20000005 and item 000010. Therefore, the settlement and possibly inventory management are carried out using the number of the preceding document.
System Response
This entry is not allowed.
Procedure
Enter the document and the item number of the preceding sales documentHi,
Refer the sales quotation number for GR instead of the sales order number.
Regards,
Ravi Kumar C. -
Create Goods Receipt with an Inbound Delivery
Hi,
Can you anybody help me, how to create a Goods Receipt with correspond to Inbound Delivery.
Which FM or BAPI avaliable for this. Anybody did it before please pass to me with details?
Thanks in Advance
Cino C B
Edited by: Cili on Feb 11, 2008 8:19 PMCheck BAPI_GOODSMVT_CREATE
Look at the documentation if you want to make a goods issue or a good receipt for purchase order or production order, etc.
Inbound delivery only means is going to enter the plant (ie. mvt 101) -
Find a bapi for Creates a Goods Receipt with correspond to Inbound Delivery
hi expert!
exist a bapi for tcode:MIGO_GR ( Goods Receipt with correspond to Inbound Delivery)
i know one bapI BAPI_GOODSMVT_CREATE can Creates a Goods Receipt,
but i can't know to use it to Creates a Goods Receipt with correspond to Inbound Delivery.
or other bapi exist for MIGO_GR?
Best Regard!Hi Vatcan,
Chek the Inbound Delivery 1st weather you refer the right PO in it
You can also chek in PO i
1 Me23n Go to confirmation tab here you can see the Inbound delivery quantity
2 Chek which reference document you recived the goods, (i.e You recived the goods with reference to PO or Inbound delivery)
2 Coz if you refer the inbound delivery then syestem will deafult show the inbound quanity
And yes the actual quanity will update in inbound delivery if you refer the inbound deivery while reciveing the goods -
Error in goods receipt with PO
Hi experts,
I am getting the following error,when trying goods receipt with Purchase Order using BAPI_GOODSMVT_CREATE.
"No goods receipt possible for pruchase order XXXXXX".
What may be the reason for this,its urgent please help.
Thanks & Regards
KarthikI just got the error message in the email. Here is a sample code for movement type 122. Replace all the XXXX values with values from your system.
Also as a sanity check make sure that the PO/Item you are testing with can be returned back to the vendor - use MB01 to make sure this movement type is successful for your PO/Item.
DATA: w_goodsmvt_header LIKE bapi2017_gm_head_01,
w_goodsmvt_code LIKE bapi2017_gm_code,
i_return LIKE bapiret2 OCCURS 0.
DATA: BEGIN OF i_goodsmvt_item OCCURS 0.
INCLUDE STRUCTURE bapi2017_gm_item_create.
DATA: END OF i_goodsmvt_item.
DATA: w_extnumber TYPE bal_s_log-extnumber.
DATA: w_goodsmvt_headret LIKE bapi2017_gm_head_ret,
w_materialdocument LIKE bapi2017_gm_head_ret-mat_doc,
w_matdocumentyear LIKE bapi2017_gm_head_ret-doc_year.
CLEAR: w_goodsmvt_header,
i_goodsmvt_item,
i_goodsmvt_item[],
i_return[].
MOVE sy-datum TO w_goodsmvt_header-pstng_date.
w_goodsmvt_code = '01'. "MB01
i_goodsmvt_item-material = 'XXXXXX'. "material number
i_goodsmvt_item-plant = 'XXXX'. "Plant that originally recieve this PO
i_goodsmvt_item-stge_loc = 'XXXX'. "Storage loc
i_goodsmvt_item-entry_qnt = 1.
i_goodsmvt_item-entry_uom = 'XXX'.
i_goodsmvt_item-entry_uom_iso = 'XXX'.
i_goodsmvt_item-po_number = 'XXXXXXXXXX'.
i_goodsmvt_item-po_item = 'XXXXX'.
i_goodsmvt_item-move_type = '122'.
i_goodsmvt_item-mvt_ind = 'B'.
i_goodsmvt_item-move_reas = '1'. "or whatever reason allowed for 122
APPEND i_goodsmvt_item.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = w_goodsmvt_header
goodsmvt_code = w_goodsmvt_code
testrun = 'X' "turn this off once I_RETURN comes back empty
IMPORTING
goodsmvt_headret = w_goodsmvt_headret
materialdocument = w_materialdocument
matdocumentyear = w_matdocumentyear
TABLES
goodsmvt_item = i_goodsmvt_item
return = i_return.
BREAK-POINT. -
PO Goods Receipt with Serial / Batch number with DI API
I am creating PO Goods Receipt with DI API. This works fine. But when i have items with serial numbers and batch numbers in the same PO, then i am getting either of the following errors:
1. [OITM]Item has no serial number management
2. [OIBT] Invalid Item Code.
I debugged the code and the values i set seems to be correct. I am using VB.Net and SAP 2004 with Patch 23.
Thanks
AnandAnand,
When you are working with a Serialized item in the first scenario, have you tested working with the item in the Business One application itself? Have you tried to have the system assign a serial number for the item when issuing a Goods Receipt? Do you get the same issue through the Business One interface. With respect to working with Batches, have you setup the Batches for inventory items through the Business One interface yet? If you have not setup Batches, this would be why you would not have any data in the OIBT table.
HTH,
Eddy -
Goods Receipt with serial numbers
Hello everyone
I'm having problems when i try to add a goods receipt with serial numbers
Code:
OReceipt = oCompany.GetBusinessObject(BoObjectTypes.oInventoryGenEntry)
OReceipt.Series = 18
OReceipt.DocDate = Date.Now
OReceipt.TaxDate = Date.Now
OReceipt.Lines.ItemCode = "MP.PP.241"
OReceipt.Lines.Quantity = 1
OReceipt.Lines.SerialNumbers.InternalSerialNumber = "SN-01"
OReceipt.Lines.SerialNumbers.ManufacturerSerialNumber = "SN-01"
OReceipt.Lines.AccountCode = "_SYS00000000109"
OReceipt.Lines.WarehouseCode = "MPfabrik"
OReceipt.Comments = ".NET"
res = OReceipt.Add()
Any help will be greatly appreciated!Hi Nestor
All forums on SCN contain a description of what the forums is for. This forum's Overview page:
Looking at the overview, I suspect you want to post your query elsewhere? Perhaps one of Microsoft's forums?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
Inbound IDOC to post goods receipt with inbound delivery as reference
Kindly let me know the message and IDOC type for
Inbound IDOC to POST GOODS RECEIPT with inbound delivery as reference
I tried using WMMBXY but it didn;t work.
Pls let me know asap.Your help is appreciated.
Thanks and Regards
Priti
Edited by: Priti Adukia on Feb 11, 2008 4:48 AMHi Nicole,
What I've to do is quite the same as the case. Outbound and Inbound are in the same SAP system. If I've good understanding, I must set partner profile as follows :
INBOUND - Parter LI with
Message DESADV
Operation code DELS
OUTBOUND - Partner KU
Message DESADV
Operation code ???
Please advise
Suchart -
Goods receipts with GTIN barcode thru RF
Hello Experts,
In order to perform Goods receipts with a custom RF transaction, we need to scan the material number and PO number on the pallet that is sent by vendors.these barcodes are external barcodes from the vendor. Our vendors are using GTIN codes on the pallets, is it possible to scan these barcodes with RF solution ? is that involved some custom code in the RF development, where these barcode type is supported by SAP system?
Thanks in AdvanceHello,
Based on my understanding below are my answers.
Your question: is it possible to scan these barcodes with RF solution ?
Asnwer: Yes. Through RF Gun you can scan and get the details
Your Question: is that involved some custom code in the RF development,
Answer: Yes. Because this GR is based on the GTIN scan number.
You Question: where these barcode type is supported by SAP system?
Answer: You can see in SPRO: LE: Mobile Data Entry: BarCode. where you can give the Bar code type.. Generally now a days Most Gtin numbers are UPC/EAN128 type.
Coming to the process What my understanding is.... you need to have custom RF Z TCode (Program) required to sacn and process based on material and PO number.
You can do GR directly by using functional module for VL01n/MiGO if WM is required then use functional module to create TO and confirm module to confirm....
All i can say is anything you can so through costume program that can be assigned to RF menu management screen.
hope i answer your questions based on my understanding.....
thanks.
tkreddy -
Good receipt with/without GR assignment
Dear all,
I am little puzzle to get an understanding in difference between...
Goods receipt with GR assignment
and
Goods receipt without GR assignment.
Can please anyone let me know in details.
Thanks a lot in advance,
Cheers!perhaps let me be more clear.
above query is related to Confirmations -related goods issue.
In customization-in purchasing- under confirmation- under set up conformation control .............there is an indicator to select / or not to select GR assignment indicator ...............in order to post the GR with reference to vendor confirmations.
I wanted to enquire why and what is the functionality of this GR assignment and how system is going to react ........when we do select OR when we do not select that indicator.
Hope this well help any body to get some idea of my query.
Cheers! -
Batch needs to be created 1st then post goods receipt with inbound delivery
Hi,
We are having split valuated materials with batch managed, we need to post goods receipt with inbound delivery.
When we create inbound delivery with PO batch is blank which is correct.
Now when we try to post GR with IBD in VL32N we need to put batch, but we are getting error message as batch is not available in receiving plant.
In this case we have to create batch 1st with MSC1N and then we can put batch number in Vl32N and can post GR.
If material is not split valuated we can put batch manualy(Without creation in MSC1N) in VL32N and it is allowing to post GR with batch.
Can you please let me know this behaviour, is there any SAP note available about this behaviour.
Thanks
SudhirHi Uwe,
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
The binary answer would be no. You should use WMMBXY or MBGMCR instead.
But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
Hope this helps. Let me know if you have more questions.
Regards,
Rudra -
Good Receipt with Scheduling agreement
Dear
We are creating scheduling agreemant & delivery Schedule.
Is there any posiblity to take good receipt with reference to SA perior to delivery date mentioned in the delivery schedule?
Schedule line 26.06.2009
Good Receipt 25.06.09
Thanks,
SAmir BhattHi,
I dont think so it is possible, But Still i can check with the change of some settings, before that you jst telme clearly wy do u have requirement? What was the reason?
Hari Prasad
Maybe you are looking for
-
I don't know hoIw to fix this problem, anyone. I have tried to add device, but like I said it is already on the devices but won't show up in the computers so I can put music on it syncs on the itunes site it also says my ipod on the itunes site but
-
How can I use some of the image i am working on to paint with? like if I wanted to give someone an extra eye in the forehead, ow could i then paint their own i in the forehead? I know there is a paint tool for that, i just can't find it ... :/
-
Satellite Pro P300 - Fn+f5 combination doesn't change the monitor
On two P300 laptops, we have a problem that the fn+f5 combination doesn't change the monitor layout. If you press fn+f5 you see the bar where the different modes are displayed, but if you release the layout stays the same (laptop as single monitor) T
-
Hi All! When uploading file (using Flex FileReference) how can we know if the url is really accessible? What if the server is down or the session already expires? Is there a way for flex to know this? Thanks.
-
Everyone, This may be a lifesaver for file management. "Moving" files has been hidden in Maverick. In the past, dragging and dropping with one drive was an automatic move command. Although this still holds true for the built in harddrive, this does n