Silencing the HP15c calculator application: anyone know how?

I have the official Hewlett-Packard 15c calculator application. Does anyone know how to silence it? Everytime I press a key, it is so loud.
I know that I can hit the side ringer on/off switch, but I want to leave my ringer on. I also know I can put headphones on, but then it clicks through the headphones.
I've looked in the application settings both inside the application (tilt to landscape, then hit the menu key) as well as in the general iPhone settings area (no HP 15c selection).

Thanks, Mort, I tried that, but it didn't work...maybe because I was already in the highest resolution?
I saw advice to someone whose itunes window was too large. They suggested applescript code:
tell application "Adobe Illustrator"
set bounds of window 1 to {296, 97, 1394, 996}
end tell
I replaced iTunes with illustrator, but got an error message:
Adobe Illustrator got an error: Can’t set window 1 to {296, 97, 1394, 996}.
thanks!

Similar Messages

I managed to transfer the music from 1 pc to 1 other pc (to be played by iTunes). Bit didn't fixe the transfer of the meta data (for example the rating). Does anyone know how to use your old playlists, etc..(= meta data) on the other PC? So, please help!

I managed to transfer the music from 1 pc to 1 other pc (it is played perfectly on the other PC (Windows 7- pc) by the newly downloaded and installed iTunes, version 10.6.1.7). But I didn’t fix the transfer of the meta data (for example the rating). Does anyone know how to use (or import) your old playlists, etc..(= meta data) on the other PC? So, short: how to migrate the meta data from one pc to an other pc?
It's a pity that it seems not to be possible to import on the new pc e.g. the ratings!!!
I don't want to start again with rating my (beautiful classical) music!
Thanks, from Amsterdam, NL

Did you do the move via Home Sharing, astro?
If so, perhaps try the instructions from the following post:
Re: i transfered itunes to my pc playlists did not go

I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

Can't believe it was that easy... I'm so dumb! Thanks for your help, I was getting so aggravated! I owe you... Thanks again!

HT5312 Am I do not know how to change my rescue email as it is wrong and in can not remember my answers to my security questions so I want to change them but I can't as I have the wrong rescue email anyone know how to change your rescue email

Am I do not know how to change my rescue email as it is wrong and in can not remember my answers to my security questions so I want to change them but I can't as I have the wrong rescue email anyone know how to change your rescue email

You won't be able to change it until you can answer 2 of your questions - you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the page that you posted from to update your rescue email address for potential future use.

Hi! I have a MacBook and I am trying to delete files from Microsoft Word. Somehow I cannot simply throw them in the trash. Does anyone know how to resolve this issue?

Hi! I have a MacBook and I am trying to delete files from Microsoft Word. Somehow I cannot simply throw them in the trash. Does anyone know how to resolve this issue?

Why not? Are there error messages? Where are the files located? Why are you deleting MicroSoft Word files?

Strange System Font in Dreamweaver. After I installed Dreamweaver CS4 on my Mac, it loaded this strange font as seen in the photo attached. Anyone know how to fix this? I have uninstalled/reinstalled many times. No prob w/ other CS4 programs.

Strange System Font in Dreamweaver. After I installed Dreamweaver CS4 on my Mac, it loaded this strange font as seen in the photo attached. Anyone know how to fix this? I have uninstalled/reinstalled many times to no avail. There are no other problems with w/ other CS4 programs, they all have the normal system font. I can't figure it out. Thanks!

Funny fonts issue in PI etc.,
http://kb2.adobe.com/cps/405/kb405153.html
Fonts in Dreamweaver panels display incorrectly
http://kb2.adobe.com/cps/138/tn_13862.html
Nadia
Adobe Community Expert : Dreamweaver
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
Web Design & Development
http://www.perrelink.com.au
http://twitter.com/nadiap

HT1476 my iphone 4 is only charging while off and everytime i try to reset it it still does the same thing does anyone know how to fix this ?

my iphone 4 is only charging while off and everytime i try to reset it it still does the same thing does anyone know how to fix this ? ive tried resetting 5 times already , ive tired different plugs and usbs , nothings working

You will need to contact the app developer if your having problems with a 3rd paty app. See if they have a support forum.

My mac recently got stolen, after getting a new one i had to reinstall logic studio, but after moving house i have lost the serial number, does anyone know how to get a new one?

my mac recently got stolen, after getting a new one i had to reinstall logic studio, but after moving house i have lost the serial number, does anyone know how to get a new one?

Here:
http://support.apple.com/kb/HT1861

My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem

My ipad is disabled and I cannot restore it because the Function Find My Ipad setting was on, and I cannot get in the ipad to turn off the setting in order to restore the ipad. Does anyone know how to solve the problem

Force iPad into Recovery Mode. Follow step 1 to 5 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times.

After restoring my iMac to factory settings it doesn't allow me to get iPhoto, iMovies and pages, which i had from the os x update. anyone knows how to recover them, as they are not on the purchased items? thanks

after restoring my iMac to factory settings it doesn't allow me to get iPhoto, iMovies and pages, which i had from the os x update. anyone knows how to recover them, as they are not on the purchased items? thanks

From your backup.

A few of my playlists are gone on my Mac with the new update does anyone know how to get them back?

a few of my playlists are gone on my Mac itunes library with the new update does anyone know how to get them back? I'm so frustrated! Any ideas?

See also:
*http://kb.mozillazine.org/Lost_bookmarks
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

I tried to update the software overnight, and it was still in the beginning stages of the progress bar when I woke up. When I restarted the process I have to restore the phone, its again stuck in the beginning of the process. Does anyone know how long th

I tried to update the software overnight, and it was still in the beginning stages of the progress bar when I woke up. When I restarted the process I have to restore the phone, its again stuck in the beginning of the process. Does anyone know how long this should take? The beginning sections seemed to fly by.

Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

I have a new HP Officejet 6500A plus. I cannot get it to connect to my Airport Extreme V5.6. It see the wifi signal but Fails on "Filtering" and possibly the channel. Does anyone know how to reset or reconfigure filtering

I have a new HP Officejet 6500A plus. I cannot get it to connect to my Airport Extreme V5.6. It see the wifi signal but Fails on "Filtering" and possibly the channel. Does anyone know how to reset or reconfigure filtering and channel on the old airports?

This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host >

Hi, I updated my iPhone 4 from iOS 5.1 to 5.1.1 and now it won't connect to 3g, it only gets EDGE, does anyone have the same issue? Anyone knows how to fix it? Thanks

Hi, I updated my iPhone 4 from iOS 5.1 to 5.1.1 and now it won't connect to 3g, it only gets EDGE, does anyone have the same issue? Anyone knows how to fix it? Thanks

Yeah, it´s happening in normal 3g coverage area, in fact, i used the 3g to download the iOS but after installing it, the phone doesn't get the 3g anymore.
I tryed the reboot pocess, but it didn't fix it
I haven't tryed the restore to factory settings process,
Is there a way to downgrade to iOS 5.1 again?
Thaks

Im connectioning my macbook to my hdmi port in tv. I am getting no sound through the tv only the macbook speakers. anyone know how to get my tv to read sound?

Im connectioning my macbook to my hdmi port in tv. I am getting no sound through the tv only the macbook speakers. anyone know how to get my tv to read sound?

The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. But check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2
The Mini-DVI port doen't carry audio at all. The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports.
To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion or 10.8 Mountain Lion). When System Profiler comes up check the Model Identifier and post it back here.

Silencing the HP15c calculator application: anyone know how?

Similar Messages

Maybe you are looking for