Silent install of Exchange 2010 Mangement Tools (SP2)

Hello,
i am trying to create a silent install of Exchange 2010 Management tools.
I created a batch-file :
dism /online /enable-feature /featurename:IIS-WebServerRole
dism /online /enable-feature /featurename:IIS-WebServerManagementTools
dism /online /enable-feature /featurename:IIS-IIS6ManagementCompatibility
dism /online /enable-feature /featurename:IIS-Metabase
dism /online /enable-feature /featurename:IIS-LegacySnapIn
"share\Exchange 2010\Exchange2010-SP2-x64\setup.com" /r:MT
Problem is that this "MDT-application" needs to run as administrator (i tried to run the .bat-file, but it need administrator run).
Howto do this in MDT?
Problem 2: by the process of "copying files" the installation is stopped without error or message.
Any other working options to install the Exchange Management Tools unattended by MDT?
Thx

There is an easier way:
Under command line in your application settings, enter the setup.exe (not the batch file located on the network) with the appropriate parameters for silent install (http://technet.microsoft.com/en-us/library/aa997281(v=exchg.141).aspx).
Under the working directory, put the network UNC path containing your source files.
If you look in the task sequence you can add a new step (I typically add this under System Restore > Custom Tasks); under the category of Roles there is a "Install Roles and Features" step.
You can then just check the boxes for each individual role and feature you wish to have installed. I typically make a couple of different task sequences for server installations and based upon their designated function when put into production. This
process uses the servermanager process as opposed to using dism, so there is no requirement for changing account privileges, it just runs as administrator on the local machine.
You then add a second step after the role configuration step to install an application (located under General). Change the radio button option to Install Single application and when the dialog for which application to add is shown, choose your Exchange Management
Console application.
Now it will run automated (as long as you specified all the appropriate prerequisites in the roles and features) and you eliminate the need to try to sort out batch files and privilege escalation, etc.

Similar Messages

  • Error when trying to install MS Exchange 2010 Management Tools Windows 7 x64 SP1

    When I try to install Exchange 2010 Management Tools on my Windows 7 Pro x64. I get the message ExSetupUI.exe has stopped working? Has anybody else gotten this message?  It doesn't even load into the install screen. It is stopping before then.

    Hi
    Have you installed the admin tools for windows 7 and all the prerequisites? Try running the setup from an elevated prompt or "as Administrator"
    for ref:
    http://social.technet.microsoft.com/Forums/en-US/63880f4e-6b6e-4ea9-b3b6-8a535657288f/installing-exchange-management-tools-on-a-win-7-x64-box-getting-error-on-readiness-checks?forum=exchange2010

  • Some help with migrating exchange 2010 to exchange 2013 + installing another exchange 2010 to be edge-forefront-proxy server

    Hi guys (and girls)!
    Hear me up. The idea is like this:
    A friend of mine has currently Exchange 2010 SP3 in his environment with Forefront Protection installed on it. As we all know Forefront Protection is discontinued in Exchange 2013 environment because Exchange 2013 on-premisses is using integrated tool for
    doing that, but a friend of mine would really like to stick with Forefront Protection because it is "much better tool" then integrated stuff in 2013.
    Ok, so here's the idea. Exchange 2010 SP3 with Forefront is installed on Phisical machine (so, not virtualized) on 2008 r2 std OS. We decided to move to Exchange 2013 because we wanted to achieve DAG on Exchange 2010 but we realized that is not possible
    because 2008 R2 STD OS does not support failover-clustering functionality, but you are able to achieve that on newer OS for example 2012? Ok, so we bought another server, where we are planing to install Vmware Esxi and put two virtual machines on it.
    One Will be 2012 r2 STD OS with Exchange 2013 on it, the other Will be 2008 r2 STD with Exchange 2010 Edge role + Forefront on it. We are planing to move Exchange 2010 production server to virtual machine Exchange 2013, and newly virtual machine
    with Exchange 2010 edge server will only be "a kind of Proxy server with Forefront functionality". What concers me?
    Should we install Exchange 2010 edge transport 1st, or Exchange 2013? I think I have read somewhere after you put Exchange 2013 in production you are "unable" to install any previous Exchange versions is that true?
    One more question about what happens after you install another Exchange 2010 with Edge role in production enviroment? Does installation effects a production enviroment, let's say we do just a clean installation of Exchange + ran updates?
    Which roles do you need to install on Exchange 2010 to achive Edge role? Do you need to have all the roles install for having Edge server (mailbox, hub,cas?).
    bostjanc

    Should we install Exchange 2010 edge transport 1st, or Exchange 2013? I think I have read somewhere after you put Exchange 2013 in production you are "unable" to install any previous Exchange versions is that true?
    already answered by PS CL above
    One more question about what happens after you install another Exchange 2010 with Edge role in production enviroment? Does installation effects a production enviroment, let's say we do just a clean installation of Exchange + ran updates?
    No it does not as long you don't make any changes on send/receive connector and do the EdgeSubscription. As soon as you do the Edge subscription there will be send/receive connector created, so pay attention how to setup the Edge Server.
    Which roles do you need to install on Exchange 2010 to achive Edge role? Do you need to have all the roles install for having Edge server (mailbox, hub,cas?).
    Just install the Edge Transport Server and make sure you install ADLDS services.
    as you have mentioned you are doing to install both Mailbox and Edge server on the same VMware - it is a single point of failure.
    Where Technology Meets Talent

  • Exchange 2010 management tools and others

    Win2k8 domain, Exchange 2010 servers
    We want to move to Win8.1 but we, the admins, are preventing it because our tools like the Exchange 2010 Management tool doesn't work with Win8.0 so we're stuck with Win7.
    I've googled around and most suggestion never worked.
    Does Microsoft have any plans at all to have Exchange 2010 management tools and other tools we use to manage our domain work with Win8.1?

    Hi Rino, 
    Thanks for your sharing and efforts put on this issue. 
    This will benefit others who encounter the similar scenario as yours.  
    Happy holiday~
    Kate Li
    TechNet Community Support

  • Exchange 2010 SP1 and SP2 are no longer supported.

    Exchange 2010 SP3 is the minimal version that should be installed on your Exchange Servers and just may contain the fixes you need to solve your issue.
    Support for 2010 SP1 and SP2 has ended.
    Before posting a question, please ensure you are running at least 2010 SP3.
    For more details:
    http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
    Twitter!:
    Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

    Exchange 2010 SP3 is the minimal version that should be installed on your Exchange Servers and just may contain the fixes you need to solve your issue.
    Support for 2010 SP1 and SP2 has ended.
    Before posting a question, please ensure you are running at least 2010 SP3.
    For more details:
    http://blogs.technet.com/b/rmilne/archive/2014/04/09/end-of-exchange-2010-sp2-support.aspx
    Twitter!:
    Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Updated: Event ID 1006 - Can not delete Mails in OWA after installing SP1 (Exchange 2010) = Outlook and OWA Light are OK

    Hi all,
    4 Exchange Servers (2 DB + 2 CAS NLB Cluster) all Exchange 2010 SP1
    Outlook work fine.
    If I delete a message in OWA i became the following errors:
    Internet Explorer:
    Die Netzwerkverbindung ist nicht verfügbar. Wenn das Problem weiterhin auftritt, wenden Sie sich mit folgendem HTTP-Statuscode an den Helpdesk: 0.
    Translation: The networkconnection is not available. If it happens again, contact the helpdesk with HTTP statuscode 0
    Firefox:
    Die Netzwerkverbindung ist nicht verfügbar. Wenn das Problem weiterhin auftritt, wenden Sie sich mit folgendem HTTP-Statuscode an den Helpdesk: 302.
    Translation: The networkconnection is not available. If it happens again, contact the helpdesk with HTTP statuscode 302
    Event ID 1006 MSExchange Mailbox Replication
    Fehler: MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80040115, ec=-2147221227)
    Before SP1 it worked fine.
    Can somebody help me ?
    Kind regards Andy

    Hi,
    First, I would like to confirm the following questions:
    1. Does the issue occur on certain user mailbox via OWA or each user mailbox?
    2. Which OWA folder’s email cannot be deleted, Inbox, Sent Items or each folder?
    3. Which version of operating system is installed on the client machine, Windows XP, Windows Vista or Windows 7?
    At this stage, I suggest you temporarily disable firewall and anti-spam for a test. If the emails still cannot be removed via OWA, please refer to the following article
    and use isinteg tool to check and repair Information Store.
    Description of the Isinteg utility
    Thanks.
    Novak Wu-MSFT

  • Exchange 2010 database help after clean install of exchange 2010

    Long story short. Had exchange 2010 issues. My exchange store would not open and I could not mount database. Copied v14 folder over to another folder. Removed exchange from AD, recreated my windows 2008 r2 virtual machine, Installed completely new exchange.
    It came up with new mailbox offline, which i left that way. I copied my flat files into the newly created v14 folder. When I open exchange, I see an unmounted copy of my old database. However, I am unable to do anything with it. Esutil said it was a clean
    shutdown. I am looking for the steps I need to take to get my old database back online as it has everyone's info. So exchange see's a copy of my old database, but nothing else. Any help would be appreciated. Thanks in advance.
    John

    Thanks for the response Willard,
    Your correct, I have placed myself in a Jam. the .edb file is in a clean state. I copied the whole directory over to a mapped drive. I am currently working the problem 2 ways. I have created a recoveryDB, but when I try to perform a New-MailboxRestore request
    it fails. When i do a get statistics I can see all email in the recoveryDB, but only a system file mailbox in the new database i created, none of my users. I have also tried the database portability. I can check and confirm the old database, but at the last
    step I am supposed to Get Mailbox -Database "old database", it fails to find the old database. So I am unable to run Get-Mailbox -Database "old Database" | Set-Mailbox -Database "New Database". I have set the new database to be
    overwritten. The problem arises when i try to get-mailbox -Database (old database)=   it says it cannot find database. Since I performed a clean install the old database is not in Active directory. When I open the path to the new database it is pointing
    at the .edb in the folder I created using the steps at www.exchangerecover.com/blog/2010/move-a-mailbox-database-using-database-portability.html
    Now that I totally screwed it up, I can start from the beginning if necessary. I am just hoping I do not lose the data. I would appreciate a push in the right direction. I am currently trying to touch base with an exchange admin at the local university.
    We have played phone tag so far. Microsoft support is my next option.
    John

  • Exchange 2010 upgrade to SP2 failed

    I got errors when trying to upgrade Exchange Server 2010 to SP2.  It failed on the hub transport role.  Any ideas on how to repair this?  The server had a previous issue and I was trying to resolve it by installing SP2.  Thank
    you.
    [01/02/2013 19:11:29.0066] [1] Executing:
              $vdirName = "PowerShell (Default Web Site)";
              $InternalPowerShellUrl="http://" + $RoleFqdnOrName + "/powershell";
              $vdir = get-PowerShellVirtualDirectory -server $RoleFqdnOrName -DomainController $RoleDomainController | where { $_.Name -eq $vdirName };
              if ($vdir -eq $null)
                $vdirName = "PowerShell";
                new-PowerShellVirtualDirectory $vdirName -InternalUrl $InternalPowerShellUrl -DomainController $RoleDomainController -BasicAuthentication:$false -WindowsAuthentication:$false -RequireSSL:$false;
              else
                update-PowerShellVirtualDirectoryVersion -DomainController $RoleDomainController;
                Set-PowerShellVirtualDirectory $vdirName -InternalUrl $InternalPowerShellUrl -DomainController $RoleDomainController -WindowsAuthentication:$false -RequireSSL:$false;
    [01/02/2013 19:11:29.0066] [2] Active Directory session settings for 'Get-PowerShellVirtualDirectory' are: View Entire Forest: 'True', Configuration Domain Controller: 'Exchange.BGCC.local', Preferred Global Catalog: 'Exchange.BGCC.local', Preferred Domain
    Controllers: '{ Exchange.BGCC.local }'
    [01/02/2013 19:11:29.0066] [2] Beginning processing get-PowerShellVirtualDirectory -Server:'Exchange.BGCC.local' -DomainController:'Exchange.BGCC.local'
    [01/02/2013 19:11:29.0082] [2] Searching objects "Exchange.BGCC.local" of type "Server" under the root "$null".
    [01/02/2013 19:11:29.0082] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
    [01/02/2013 19:11:29.0082] [2] Searching objects of type "ADPowerShellVirtualDirectory" with filter "$null", scope "SubTree" under the root "EXCHANGE".
    [01/02/2013 19:11:29.0129] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
    [01/02/2013 19:11:29.0129] [2] Preparing to output objects. The maximum size of the result set is "unlimited".
    [01/02/2013 19:11:29.0191] [2] [WARNING] IIS://EXCHANGE.BGCC.local/W3SVC/1/ROOT/PowerShell wasn't found. Please make sure you've typed it correctly.
    [01/02/2013 19:11:29.0207] [2] Ending processing get-PowerShellVirtualDirectory
    [01/02/2013 19:11:29.0207] [2] Active Directory session settings for 'Update-PowerShellVirtualDirectoryVersion' are: View Entire Forest: 'True', Configuration Domain Controller: 'Exchange.BGCC.local', Preferred Global Catalog: 'Exchange.BGCC.local', Preferred
    Domain Controllers: '{ Exchange.BGCC.local }'
    [01/02/2013 19:11:29.0207] [2] Beginning processing update-PowerShellVirtualDirectoryVersion -DomainController:'Exchange.BGCC.local'
    [01/02/2013 19:11:29.0207] [2] Searching objects "Exchange.BGCC.local" of type "Server" under the root "$null".
    [01/02/2013 19:11:29.0222] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
    [01/02/2013 19:11:29.0222] [2] Ending processing update-PowerShellVirtualDirectoryVersion
    [01/02/2013 19:11:29.0238] [2] Active Directory session settings for 'Set-PowerShellVirtualDirectory' are: View Entire Forest: 'True', Configuration Domain Controller: 'Exchange.BGCC.local', Preferred Global Catalog: 'Exchange.BGCC.local', Preferred Domain
    Controllers: '{ Exchange.BGCC.local }'
    [01/02/2013 19:11:29.0238] [2] Beginning processing Set-PowerShellVirtualDirectory -InternalUrl:'http://exchange.bgcc.local/powershell' -DomainController:'Exchange.BGCC.local' -WindowsAuthentication:'False' -RequireSSL:'False' -Identity:'Exchange.BGCC.local\PowerShell
    (Default Web Site)'
    [01/02/2013 19:11:29.0238] [2] Searching objects "Exchange.BGCC.local\PowerShell (Default Web Site)" of type "ADPowerShellVirtualDirectory" under the root "$null".
    [01/02/2013 19:11:29.0269] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
    [01/02/2013 19:11:29.0285] [2] Processing object "EXCHANGE\PowerShell (Default Web Site)".
    [01/02/2013 19:11:29.0316] [2] The properties changed on the object 'PowerShell (Default Web Site)' (CN=PowerShell (Default Web Site),CN=HTTP,CN=Protocols,CN=EXCHANGE,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=BGCC,CN=Microsoft
    Exchange,CN=Services,CN=Configuration,DC=BGCC,DC=local) are: "{ InternalAuthenticationMethods[msExchInternalAuthenticationMethods]={  }, ExternalAuthenticationMethods[msExchExternalAuthenticationMethods]={  } }".
    [01/02/2013 19:11:29.0316] [2] Saving object "EXCHANGE\PowerShell (Default Web Site)" of type "ADPowerShellVirtualDirectory" and state "Changed".
    [01/02/2013 19:11:29.0316] [2] Previous operation run on domain controller 'Exchange.BGCC.local'.
    [01/02/2013 19:11:29.0316] [2] Authentication settings are being applied on the IIS virtual directory "IIS://EXCHANGE.BGCC.local/W3SVC/1/ROOT/PowerShell".
    [01/02/2013 19:11:29.0378] [2] [ERROR] Unexpected Error
    [01/02/2013 19:11:29.0378] [2] [ERROR] A failure occurred while trying to update metabase properties.
    [01/02/2013 19:11:29.0394] [2] [ERROR] The system cannot find the path specified.
    [01/02/2013 19:11:29.0394] [2] Ending processing Set-PowerShellVirtualDirectory
    [01/02/2013 19:11:29.0394] [1] The following 1 error(s) occurred during task execution:
    [01/02/2013 19:11:29.0394] [1] 0.  ErrorRecord: A failure occurred while trying to update metabase properties.
    [01/02/2013 19:11:29.0394] [1] 0.  ErrorRecord: Microsoft.Exchange.Data.Common.LocalizedException: A failure occurred while trying to update metabase properties. ---> System.Runtime.InteropServices.COMException (0x80070003): The system cannot find the
    path specified.
       at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
       at System.DirectoryServices.DirectoryEntry.Bind()
       at System.DirectoryServices.DirectoryEntry.get_AdsObject()
       at System.DirectoryServices.PropertyValueCollection.PopulateList()
       at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
       at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
       at Microsoft.Exchange.Management.Metabase.IisUtility.SetAuthenticationMethod(DirectoryEntry virtualDirectory, AuthenticationMethodFlags method, Boolean value)
       at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetIisVirtualDirectoryAuthenticationMethods(ADExchangeServiceVirtualDirectory virtualDirectory, String metabasePath)
       at Microsoft.Exchange.Management.SystemConfigurationTasks.ExchangeServiceVDirHelper.SetSplitVirtualDirectoryAuthenticationMethods(ADExchangeServiceVirtualDirectory virtualDirectory, String nego2Path, TaskErrorLoggingDelegate errorHandler, LocalizedString
    errorMessage)
       --- End of inner exception stack trace ---
    [01/02/2013 19:11:29.0394] [1] [ERROR] The following error was generated when "$error.Clear();
              $vdirName = "PowerShell (Default Web Site)";
              $InternalPowerShellUrl="http://" + $RoleFqdnOrName + "/powershell";
              $vdir = get-PowerShellVirtualDirectory -server $RoleFqdnOrName -DomainController $RoleDomainController | where { $_.Name -eq $vdirName };
              if ($vdir -eq $null)
                $vdirName = "PowerShell";
                new-PowerShellVirtualDirectory $vdirName -InternalUrl $InternalPowerShellUrl -DomainController $RoleDomainController -BasicAuthentication:$false -WindowsAuthentication:$false -RequireSSL:$false;
              else
                update-PowerShellVirtualDirectoryVersion -DomainController $RoleDomainController;
                Set-PowerShellVirtualDirectory $vdirName -InternalUrl $InternalPowerShellUrl -DomainController $RoleDomainController -WindowsAuthentication:$false -RequireSSL:$false;
            " was run: "A failure occurred while trying to update metabase properties.".
    [01/02/2013 19:11:29.0394] [1] [ERROR] A failure occurred while trying to update metabase properties.
    [01/02/2013 19:11:29.0394] [1] [ERROR] The system cannot find the path specified.
    [01/02/2013 19:11:29.0394] [1] [ERROR-REFERENCE] Id=PowerShellComponent___0933481a46d24e77abfdf174e8240b80 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    [01/02/2013 19:11:29.0394] [1] Setup is stopping now because of one or more critical errors.
    [01/02/2013 19:11:29.0394] [1] Finished executing component tasks.
    [01/02/2013 19:11:29.0441] [1] Ending processing Install-BridgeheadRole

    Hi
    I found a thread that with the same error message
    http://social.technet.microsoft.com/Forums/en-US/exchangesvradminlegacy/thread/2e0bebab-cbc5-4f14-a7b4-62cca7da8e82
    As it described, there is a firewall between the emc and exchange server and this was cutting the connection.
    Hope that will help
    Cheers
    Zi Feng
    TechNet Community Support

  • Unable to install on exchange 2010 any roll

    0
    Hi, We have to install client access server roll on exchange server 2010 SP3 RU1 which has mailbox server roll. During installation, we received this error " The installed product does not match the installation source(s). Until a matching source
    is provided or the installed product and source synchronized, this action cannot be performed."  It is looking source for "RU1 exc.SP3\sp3\" which is not present. Now what we have to do? How can we do further installtion?

    Hi,
    Please check whether the .msi installation file missing or modified.
    I find a related thread for your reference:
    http://stackoverflow.com/questions/4648521/the-installed-product-does-not-match-the-installation-sources-error-when-unins
    Disclaimer:
    Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure
    that you completely understand the risk before retrieving any suggestions from the above link.
    Detailed information as below:
    The MSI you think is the original probably isn't really.  It sounds like you got yourself in a situation where PackageCode ( GUID ) A is installed and now you have an MSI with PackageCode B.
    Take the MSI you have and run the following command:
    MsiExec.exe /I foo.msi REINSTALLMODE=voums REINSTALL=ALL
    This will "recache"  the MSI with the updated PackageCode.  You should then be able to uninstall either through Add Remove Programs ( Programs and Features ) or with the command
    MsiExec.exe /X foo.msi Thanks
    Mavis Huang
    TechNet Community Support

  • Silent Install for SQL 2008 admin tools, to be pushed out via SCCM 2012

    Hi I would like to know if you have any information on Silent App installs for MS SOL fetchers only? I really need to know what MSI to use in my Application and any switched i can incorporate for deployment though SCCM 2012.
    Thanks,
    Manny

    Hi,
    do you want to install SQL 2008 admin tools? and what tools do you want to install? and what is your application?  And do you want to deploy the installation script via SSCM? Please be more clear.

  • Silent Install Exchange 2010 SP2 RU7 Management Tools On Windows 7?

    We already have Exchange 2010 SP2 RU7 running on a server. We would like to automate deploying the management tools to the Windows 7 workstations of admins that use the console.
    Would a batch file with these commands work when run on a Windows 7 SP1 workstation?
    dism /online /enable-feature /featurename:IIS-WebServerRole
    dism /online /enable-feature /featurename:IIS-WebServerManagementTools
    dism /online /enable-feature /featurename:IIS-IIS6ManagementCompatibility
    dism /online /enable-feature /featurename:IIS-Metabase
    dism /online /enable-feature /featurename:IIS-LegacySnapIn
    Setup /r:MT
    How can we deploy the management tools to the workstations with SP2 and RU7 already installed so we don't have to do a separate step of installing the service pack and rollup after doing the base install?

    Hi,
    First, please make sure the Windows 7 version is 64-bit version. When you create a batch file, you should specify the shared Exchange setup file, you can refer to the following thread.
    http://social.technet.microsoft.com/Forums/en-US/e3023a7f-dd70-44c5-94c8-528d8eb1a8a1/silent-install-of-exchange-2010-mangement-tools-sp2?forum=mdt
    After you have installed Exchange Management Tool on Windows 7, please always ensure you install any Exchange Service Pack which is the same with Exchange server on the PC running EMC.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • Cannot upgrade Exchange 2010 SP1 Management Tools to SP2 on Win 8.1 workstation

    I have a Win 8.1 workstation that I am trying to update the Exchange Management tools on from 2010 SP1 to SP2. I get an error that says:
           Error:
           The following error was generated when "$error.Clear(); &RoleBinPath\ServiceControl.ps1 EnableServices Critical" was run: "AuthorizationManager check failed.".
    The WMI service is being disabled and not starting back up after, causing the error. I have tried the following:
    -Confirmed that the ExecutionPolicy is set to undefined/unrestricted for the localmachine
    -Confirmed no GPO exists in our domain to restrict this
    Every single time I run the install the WMI service switches to disabled and the localmachine Execution Policy is switched to RemoteSigned.
    I have tried the Google search steps except for the Setup /M:Recoverserver since I really don't know what that would do to our Exchange environment. I have seen some posts that the Exchange 2010 MGMT tools are not supported on Win 8, which I find hard to
    believe. I get no unsupported error just this incredibly frustrating error.
    Any ideas?

    What you are doing is totally unsupported:
    http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
    By the way, Exchange 2010 sp1 and SP2 are no longer supported, the minimum supported is SP3.
    http://social.technet.microsoft.com/Forums/en-US/b3085dd9-6777-454e-af30-279dfccffb8b/exchange-2010-sp1-and-sp2-are-no-longer-supported?forum=exchange2010
    Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

  • Exchange 2010 install corrupted, need help to remove and reinstall

    Completed a fresh install of Exchange 2010 on Windows Server 2008 R2, the install went without any issues, however when opening either the EMC or EMS there is no access, continue to get the following errors in the event log.
    Application Log:
    Log Name:      Application
    Source:        Microsoft-Windows-IIS-W3SVC-WP
    Date:          5/21/2014 8:54:34 AM
    Event ID:      2280
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      TFServer4.TFSNET.local
    Description:
    The Module DLL D:\Exchange2010\Bin\kerbauth.dll failed to load.  The data is the error.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
        <EventID Qualifiers="49152">2280</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-05-21T12:54:34.000000000Z" />
        <EventRecordID>8904</EventRecordID>
        <Correlation />
        <Execution ProcessID="0" ThreadID="0" />
        <Channel>Application</Channel>
        <Computer>TFServer4.TFSNET.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="ModuleDll">D:\Exchange2010\Bin\kerbauth.dll</Data>
        <Binary>7E000000</Binary>
      </EventData>
    </Event>
    I have attempted to reregister the dll and also to replace it however it did not solve the issue, the instance of Exchange can not find the server and or the database on startup. I have attempted to uninstall all the Exchange rolls and have been able to
    remove all but the mailbox and Management Tools, when I do I receive this:
    Summary: 3 item(s). 2 succeeded, 1 failed.
    Elapsed time: 00:00:11
    Configuring Prerequisites
    Completed
    Elapsed Time: 00:00:00
    Mailbox Role Prerequisites
    Failed
    Error:
    Uninstall cannot continue. Database 'Mailbox Database 1047019462': This mailbox database contains one or more mailboxes, mailbox plans, archive mailboxes, or arbitration mailboxes. To get a list of all mailboxes in this database, run the command Get-Mailbox
    -Database <Database ID>. To get a list of all mailbox plans in this database, run the command Get-MailboxPlan. To get a list of archive mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Archive. To get a list of all
    arbitration mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Arbitration. To disable a non-arbitration mailbox so that you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID>. To disable
    an archive mailbox so you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID> -Archive. Arbitration mailboxes should be moved to another server; to do this, run the command New-MoveRequest <parameters>. If this is the
    last server in the organization, run the command Disable-Mailbox <Mailbox ID> -Arbitration -DisableLastArbitrationMailboxAllowed to disable the arbitration mailbox. Mailbox plans should be moved to another server; to do this, run the command Set-MailboxPlan
    <MailboxPlan ID> -Database <Database ID>.
    Click here for help...
    http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=4a96fd69-9cec-4a48-9571-5c9e8ab3cfe9
    Elapsed Time: 00:00:00
    Organization Prerequisites
    Completed
    Elapsed Time: 00:00:01
    Since I do not have access to EMS and can not perform any of the necessary requirements to remove the mailbox role and uninstall all of exchange and attempt a reinstall.
     Any help with this would be most appreciated.

    Thank you for the reply, I have checked the applicationHost.config as indicated, and the path shown is the same as in the error message, there is no D:\Exchange,Server\V14\Bin\ path, it is as indicated in the error D:\Exchange2010\Bin\. Here is the section
    from that applicationHost.config file:
    <add name="CertificateMappingAuthenticationModule" image="%windir%\System32\inetsrv\authcert.dll" />
                <add name="UrlAuthorizationModule" image="%windir%\System32\inetsrv\urlauthz.dll" />
                <add name="DigestAuthenticationModule" image="%windir%\System32\inetsrv\authmd5.dll" />
                <add name="IISCertificateMappingAuthenticationModule" image="%windir%\System32\inetsrv\authmap.dll" />
                <add name="IpRestrictionModule" image="%windir%\System32\inetsrv\iprestr.dll" />
                <add name="kerbauth" image="D:\Exchange2010\Bin\kerbauth.dll" />
    As indicated in my post, I have replaced the kerbauth.dll from another functioning exchange 2010 installation and it has not corrected the issue.
    At this point I am looking for a solution for removing the mailbox role and being able to complete the uninstall of exchange and perform a clean install.
    Any additional help with this is very much appreciated.

  • Exchange 2013 Management Tools Install Error on Win8

    Hello,
    I'm having some trouble installing the management tools for Exchange 2013 on Windows 8. While going through the install if I leave "Automatically install Windows Server roles and features that are required to install Exchange Server" check I get
    this error...
    Error:
    The target of the specified cmdlet cannot be a Windows client-based operating system.
    If I uncheck that option and just check the Management Tools option, the error message changes to...
    Error:
    Global updates need to be made to Active Directory, and this user account isn't a member of the 'Enterprise Admins' group.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.GlobalUpdateRequired.aspx
    Error:
    Setup encountered a problem while validating the state of Active Directory: Couldn't find the Enterprise Organization container.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.AdInitErrorRule.aspx
    Error:
    The forest functional level of the current Active Directory forest is not Windows Server 2003 native or later. To install Exchange Server 2013, the forest functional level must be at least Windows Server 2003 native.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.ForestLevelNotWin2003Native.aspx
    Error:
    Either Active Directory doesn't exist, or it can't be contacted.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.CannotAccessAD.aspx
    Warning:
    Setup will prepare the organization for Exchange 2013 by using 'Setup /PrepareAD'. No Exchange 2010 server roles have been detected in this topology. After this operation, you will not be able to install any Exchange 2010 servers.
    For more information, visit: http://technet.microsoft.com/library(EXCHG.150)/ms.exch.setupreadiness.NoE14ServerWarning.aspx
    Any help on resolving this so I can move on with the installation would be appreciated.
    Thanks.

    Hi,
    To install the Exchange 2013 Management Tools, there are many prerequisites we need to understand before installation. And even
    we must manually install some required software.
    Here are some references that may be helpful to you:
    Install the Exchange 2013 Management Tools
    http://technet.microsoft.com/en-us/library/bb232090(v=exchg.150).aspx
    Exchange 2013 Prerequisites
    http://technet.microsoft.com/en-us/library/bb691354(v=exchg.150).aspx
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Exchange Management Tools? Hybrid Exchange 2010 SP3 - Exchange 2013 (Office 365 - Exchange Online)

    When running in Hybrid mode... is there any advantage to installing the Exchange 2013 server management tools on my machine versus the Exchange 2010 management tools? 
    Any advantages/disadvantages? 
    I still do have some on premises mailboxes that need to be migrated to the cloud (Exchange Online). 
    Thoughts? Suggestions? Experiences? 

    Hi Viva,
    We don't have Exchange Management Console in Exchagne 2013 in all the web interface we used in Exchange server 2013. In Exchange 2010 we are having Exchange management console. Hence we can able to access exchange 2010 and 2013 both on the same server.
    Exchange Queries

Maybe you are looking for