Silent Install of j2re-1_4_2_03-windows-i586-p.exe ???
I have tried to do a silent installtion of j2re-1_4_2_03-windows-i586-p.exe with this command line syntax :
j2re-1_4_2_03-windows-i586-p.exe /S /v/qn"ADDLOCAL=ALL IEXPLORER=1 INSTALLDIR=C:\java\jre REBOOT=Suppress JAVAUPDATE=0 /L C:\temp\javainstall.log"
The installation process starts what I could see in Task Manager a process called " j2re-1_4_2_03-w" starts but dissapear in 10 sec and the installation does not continue what I could see. No installation directory has been created and no log etc.
Do anyone have any clue what could be the issue here, do I use wrong syntax etc ??
We are going to use Sun Java runtime instead of Microsoft Java Virtual Machine, when that is going to be unsupported Sept 30 -04.
The correct syntax for the command line should be
j2re-1_4_2_03-windows-i586-p.exe /s /v"/qn ADDLOCAL=ALL IEXPLORER=1 INSTALLDIR=C:\java\jre REBOOT=Suppress JAVAUPDATE=0 /L C:\temp\javainstall.log"
The first " (Quote) should be between the /v and the /qn without any spaces. There should be a space after the /qn and before any other parameters.
Similar Messages
-
Silent install of j2re-1_4_1_04-windows-i586-i.exe
I am attempting to create an automated install of this application using the silent switches etc
e.g /s /v "/qn ADDLOCAL=ALL IEXPLORER=1 INSTALLDIR=D:\java\jre"
However I am unable to get the switches to work. I am prompted with the user dialogs such as Licence Agreement and the type of install
Any ideas
KevinImmediately upon installing
j2re-1_4_2_04-windows-i586-p.exe, I get the "blue
screen of death" on Windows 2000This is the usual symptom of a video driver problem.
Make sure you have all the latest service packs for Win2K installed, and for good measure, visit your graphics card vendor's site and get the latest drivers from there. -
Blue Screen of Death on install of j2re-1_4_2_04-windows-i586-p.exe
Immediately upon installing j2re-1_4_2_04-windows-i586-p.exe, I get the "blue screen of death" on Windows 2000, indicating memory dump. Applications do not work subsequently that use j2re. Attempts to modify in reinstallation indicate errors in Windows installer. Don't know what to do.
Immediately upon installing
j2re-1_4_2_04-windows-i586-p.exe, I get the "blue
screen of death" on Windows 2000This is the usual symptom of a video driver problem.
Make sure you have all the latest service packs for Win2K installed, and for good measure, visit your graphics card vendor's site and get the latest drivers from there. -
Creating silent install for j2re-1_4_2_03
We are in the processing of updating the JRE to 1.4.2_03, but end-users being what they are, we create a silent install to control the JRE installation.
I cannot get the command line option to create a .iss file. I have tried these different commands:
j2re-1_4_2_03-windows-i586-p.exe /r /f1C:\jre\jresetup.iss
j2re-1_4_2_03-windows-i586-p.exe -r /f1C:\jre\jresetup.iss
j2re-1_4_2_03-windows-i586-p.exe /r
j2re-1_4_2_03-windows-i586-p.exe -r
Depending on which InstallShield article you read, the RECORD option is either /r or -r....neither work.
Has anyone created a silent install of j2re-1_4_2_03? If so, would you be willing to share your .iss file?
pyro_dw(I know this is the wrong version, but I hope it helps on your way, if the users already have a JVM installed, distribute with JavaWebStart, it can autoupdate the JVM)
created with: j2re-1_4_1-windows-i586.exe -a -r -f1C:\setup.iss (I think)
And install with
j2re-1_4_1-windows-i586.exe -s -a -s -f1b:\setup.iss -f2C:\setup
(but it has been a while
[InstallShield Silent]
Version=v6.00.000
File=Response File
[File Transfer]
OverwrittenReadOnly=NoToAll
[{1666FA7C-CB5F-11D6-A78C-00B0D079AF64}-DlgOrder]4
Dlg0={1666FA7C-CB5F-11D6-A78C-00B0D079AF64}-SdLicense-0
Count=3
Dlg1={1666FA7C-CB5F-11D6-A78C-00B0D079AF64}-SetupType-0
Dlg2={1666FA7C-CB5F-11D6-A78C-00B0D079AF64}-SdAskDestPath-0
[{1666FA7C-CB5F-11D6-A78C-00B0D079AF64}-SdLicense-0]
Result=1
[{1666FA7C-CB5F-11D6-A78C-00B0D079AF64}-SetupType-0]
Result=303
[{1666FA7C-CB5F-11D6-A78C-00B0D079AF64}-SdAskDestPath-0]
szDir=C:\Program Files\Java\j2re1.4.1_01
Result=1
[Application]
Name=Java 2 Runtime Environment, SE v1.4.1_01
Version=1.4.1_01
Company=JavaSoft
Lang=0009 -
Java Web Start didn't install with j2sdk-1_4_2_04-windows-i586-p.exe
I just uninstalled all my java stuff from my XP Pro system
then re-installed... j2sdk-1_4_2_04-windows-i586-p.exe
With the SDK installation... j2re1.4.2_04 also installed... I think this is the Java Runtime
But, before I had a folder for Java Web Start... not I don't...
AND, the file... javaws-1_2-windows-i586-i.exe
refered to on the Java Web Start Installation page isn't on my system anymore...
(It was in an older vrsion of the Java Runtime... ( I had 2 java Runtimes at once installed, that is why I uninstalled... and even though I had Java Web Start, it wasn't working... so I deleted everything and reinstalled the j2sdk-1_2_04-windiws-i586-p.exe.)
I would just download the java Web Start but the docs tell me it should be installed when the SDK and Runtime are installed... so I worry if I got the installation correct.
Can anyone please advise me of how to get things working again.
thanks for any help - WillI fixed this broblem just install both JDK and JRE.
-
Install fails j2re-1_4_2_01-windows-i586.exe
I'm also having this problem with j2sdk-1_4_2_01-windows-i586.exe. The install starts ok, but I ghen get "Failed to extract file Dll_.ini" from the binary table. the 1.3 runtime installs fine, but it looks like the installer changed with 1.4
I finally got this running, but it doesn't make a lot of sense. I took a look at: http://support.installshield.com/kb/view.asp?pcode=ALL&articleid=Q105416&source=support_central&product=wind
I wasn't willing to make all the security changes it suggested, but tried a couple of them which didn't work and I restored the original permissions. I noticed that most if not all gave permissions to local admins, but not domain admins. That gave me the idea of trying log on to the local machine. I did that and both the jre and jdk installed without a hitch. I can't explain why this worked as this machine and my office machine are virtually the same and I built most of both networks. I log on to both machines with my domain userid. The office machine worked the first time. I will be taking a look at the installshield article again to compare the settings on both machines.
Bottom line, try logging in on the local machine and installing.
bp -
I've created a batch file to slient install j2re 1.4.2 for our PC, just like below:
@echo off
C:\java\j2re-1_4_2_06-windows-i586-p.exe /s /v "/qn /L C:\Java\setup.log REBOOT=Suppress JAVAUPDATE=0 IEXPLORER=1"
exit
after I run the batch file, task manager showed the process "j2re-1_4_2_06-windows-i586-p" for just a few second... after that, nothing has been done...
I would like to ask what is the problem with the batch file ? our computer all running with WinXP SP2,
Thank you very muchOk. I think i've found a solution that at least it's working for me. Don't ask me the exact details, because i'm no java expert. I believe it's related to the java version firefox recognise. In my case, since i'm using 2.0.0.6, all i did was add this parameter for my config section:
jpi_mimetype=application/x-java-applet (pick the lastest one installed i guess).
Now, everything it's working OK.
Best regards, Luis ...! -
Having trouble installing j2re-1_4_06-windows-i586
Hello! I recently built a computer and am trying to install Java 2 Runtime Environment on it. The computer has WinXP, SP2 on it. I downloaded j2re-1_4_06-windows-i586 from Java.com and began to install it. Towards the end of the installation process, a message popped up saying "Java(TM) Update (1.4.2_14-b05) cannot be installed on this machine because the Java(TM) Virtual Machine is currently running. Please close all running Java(TM) applications, especially browsers." I have run into this problem in the past with another XP machine. I don't recall how to correct it though. What do I need to do to fix this?
M RidzonI'd suggest check the running processes on the machine and see if a Java VM is running, if so, kill it from the Task Manager.
-
I am using Netscape 6.2.1, Windows 98
I download Java(TM) 2 Runtime Environment, Standard Edition 1.4.1_01
* Download j2re-1_4_1_01-windows-i586.exe .
Filesize = 8,015,928 bytes.
When I looked in the directory the file was listed as
j2re-1_4_1_01-windows-i586
7,829KB
Does the file downloaded size discrepency have significance?
Double clicking on the file activated the process:
"After the InstallShield Wizard
Setup Status
Java 2 Runtime Environment, SE v1.4.1_01 Setup is performing the requested operations."
After that function appered to finish with a 100% complete, I received the following error:
"Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\PROGRAM FILES\JAVA\J2RE1.4.1_01\LIB\UNPACK.EXE
abnormal program termination
OK"
Note, I may have installed Visual C++ in the past but have never used it. Does this error imply there are some missing links to Visual C++ that have confused and caused an error?
Any suggestions would be appreciated.
[email protected]Hi, crlare,
The official file size
8,015,928 bytes
= (8,015,928 / 1024) kilobytes, since 1 kbyte = 1024 bytes
= 7828.0546875 kbytes
= 7829 kbytes after rounding up
Therefore your downloaded file seems to have the correct size. To make a better check,
1. right click on your downloaded file;
2. select Properties;
3. check the size in bytes in brackets against the official size in bytes; the "bytes used" is the actual space allocated to store the data.
The Visual C++ runtime error is caused by a faulty installation of the Java bundle, which could have arisen due to interference by other applications that are open during the installation of the Java bundle. e.g. Interference by virus protection software running in the background. This error has also been known to occur in the installations of other programs.
To fix the problem, uninstall the Java Runtime Environment (JRE) you have installed, and reinstall it with all non-critical applications closed:
1. Choose Start > Settings > Control Panel.
2. Double-click Add/Remove Programs, select Java 2 Runtime Environment, SE v1.4.1_01 (or something similar), click on the Add/Remove button to uninstall the JRE.
3. Reboot your system.
4. Close all non-critical applications, including background running programs such as antivirus programs and Microsoft Task Scheduler. This can be checked/done by pressing Ctrl-Alt-Del, selecting each item except Explorer (and Systray), and clicking End Task for each.
5. Reinstall the JRE.
6. Reboot your system.
Hope this helps.
Jack -
Error while installing j2sdk-1_4_2_05-windows-i586-p.exe
Hi folks,
I am getting the following error while installing j2sdk-1_4_2_05-windows-i586-p.exe on windows 2000 machine:
Error 1327. Invalid Drive: H:/.
Please help me.
Thanks in advance.
PavanHi Pavan,
Is the drive not writable?
If you still need help with this, you might get more response by posting on the Java Forum http://forum.java.sun.com/forum.jspa?forumID=31. -
Error while installing j2sdk-1_4_2_05-windows-i586-p.exe on windows 2000
Hi folks,
I am getting the following error while installing j2sdk-1_4_2_05-windows-i586-p.exe on windows 2000 machine:
Error 1327. Invalid Drive: H:/.
I have downloaded the exe and kept in C drive. Just clicked that exe to install. I haven't set any info. like drive settings. Why I am getting "Invalide Drive" Error?
Please help me.
Thanks in advance.
Pavanif my above link doesn't satisfy you, try this one : http://support.installshield.com/kb/view.asp?articleid=q107033
-
"Error 1721" when trying to install jdk-6u3-windows-i586-p.exe ??
When I try to install the just downloaded jdk-6u3-windows-i586-p.exe
= Java SE 6 upd 3 Development Kit on my WinXP computer at first everything seems fine.
I can choose the installation options (all except the Java DB).
and selected the installation folder and start the process.
The progress bar reaches approx. 80%.
Then suddenly it stops and a popup appears:
"Error 1721. There is a problem with this Windows installer package. A program required for this install to complete could not be run".
What's wrong ?
BTW: Upd 2 could be installed without problems.Hi, Try reregistering the Windows Installer service.. For that restart you system in safe mode then
Open command prompt and excecute the below commands
1 msiexec /unregister
2 msiexec /regserver
Restart the system normally and check if it works.
If it doesn't work try using some registry cleaner like CCCleaner to clean your registry.
Hopw this will work .. -
J2sdk-1_4_2_04-windows-i586-p.exe didn't install JRE correctly.
I realize that j2sdk-1_4_2_04-windows-i586-p.exe didnt install JRE probably.
Server folder which is used for Java HotSpot Server VM was not found in C:\Program Files\Java\j2re1.4.2_04\bin.
Hence, i need to manually copy the folder D:\j2sdk1.4.2_04\jre\bin\server to JRE location.
I was wondering is this the correct way to do so? anyone of u have encounter this problem before?
thank you.
regards
yanchengIf a previous version of the JRE is installed, remove the previous JRE and install the j2sdk 1.4.2_04 JRE.
-
Problem with silent install of 11gR1 on Windows 2008
I'm doing a silent install of 11gR1 on Windows Server 2008. It works fine on Windows Server 2003. I have SECURITY_UPDATES_VIA_METALINK set to false, yet it seems to be forcing it to true and then it fails the install because I have an invalid metalink username/password. In the install log I get this, as expected:
INFO: Setting variable 'SECURITY_UPDATES_VIA_METALINK' to 'false'. Received the value from response file.
but then I get this later on:
INFO: Setting the value of SECURITY_UPDATES_VIA_METALINK to true
INFO: Setting variable 'SECURITY_UPDATES_VIA_METALINK' to 'true'. Received the value from a code block.
SEVERE: Invalid MetaLink credentials. Specify the correct e-mail address and password that you use to log in to MetaLink.
INFO: User Selected: Yes/OK
Invalid MetaLink credentials. Specify the correct e-mail address and password that you use to log in to MetaLink.
Why is it forcing this to true? As I said, this same exact response file works fine with Server 2003. Any suggestions?
Oh, also, I've tried forcing the value to false on the command line and by not specifiying a value (because the default is supposedly false).
Thanks in advanceHere is the command line I used on the last attempt:
setup -silent "ACCEPT_LICENSE_AGREEMENT=true" -responseFile C:\database\standard11.rsp -waitforcompletion -nowait
And here is the response file (I had to delete a lot of the comments to get it to fit within the 30000 character limit for this message):
RESPONSEFILE_VERSION=2.2.1.0.0
FROM_LOCATION="../stage/products.xml"
NEXT_SESSION_RESPONSE=<Value Unspecified>
ORACLE_BASE="C:\oracle\"
ORACLE_HOME="C:\oracle\product\11.1.0\db_1\"
ORACLE_HOME_NAME="OraDb11g_home1"
TOPLEVEL_COMPONENT={"oracle.server","11.1.0.7.0"}
DEINSTALL_LIST={"oracle.server","11.1.0.7.0"}
SHOW_SPLASH_SCREEN=false
SHOW_WELCOME_PAGE=false
SHOW_NODE_SELECTION_PAGE=false
SHOW_SUMMARY_PAGE=false
SHOW_INSTALL_PROGRESS_PAGE=false
SHOW_CONFIG_TOOL_PAGE=false
SHOW_XML_PREREQ_PAGE=false
SHOW_ROOTSH_CONFIRMATION=false
SHOW_END_SESSION_PAGE=false
SHOW_EXIT_CONFIRMATION=false
NEXT_SESSION=false
NEXT_SESSION_ON_FAIL=false
SHOW_DEINSTALL_CONFIRMATION=false
SHOW_DEINSTALL_PROGRESS=false
RESTART_SYSTEM=false
RESTART_REMOTE_SYSTEM=<Value Unspecified>
REMOVE_HOMES=<Value Unspecified>
ORACLE_HOSTNAME=<Value Unspecified>
SHOW_END_OF_INSTALL_MSGS=false
CLUSTER_NODES=<Value Unspecified>
COMPONENT_LANGUAGES={"en"}
INSTALL_TYPE="SE"
n_configurationOption=1
s_ASMSYSPassword=""
s_ASMSYSPasswordAgain=""
n_dbType=1
oracle.assistants.server:s_responseFileName=<Value Unspecified>
s_globalDBName="WLMDB"
s_dbSid="WLMDB"
n_selectedMemoryForOracle=256
n_memoryOption=1
s_dbRetChar="US7ASCII"
b_disableSecureConfig=false
b_loadExampleSchemas=false
b_useDBControl=true
b_receiveEmailNotification=false
s_dlgEMSMTPServer=<Value Unspecified>
s_dlgEMEmailAddress=<Value Unspecified>
s_dlgEMCentralAgentSelected=<Value Unspecified>
n_dbStorageType=1
s_mountPoint="C:\oracle\product\11.1.0\oradata"
b_enableAutoBackup=false
b_useFileSystemForRecovery=true
s_dlgRBORecoveryLocation=<Value Unspecified>
s_dlgRBOUsername=<Value Unspecified>
s_dlgRBOPassword=<Value Unspecified>
s_dlgASMCfgDiskGroupName="DATA"
s_dlgASMCfgDiskDiscoveryString=<Value Unspecified>
n_dlgASMCfgRedundancySelected=<Value Unspecified>
sl_dlgASMCfgSelectableDisks=<Value Unspecified>
sl_dlgASMCfgDiskSelections=<Value Unspecified>
sl_dlgASMDskGrpSelectedGroup={" "," "," "," "}
b_centrallyManageASMInstance=true
b_useSamePassword=true
s_superAdminSamePasswd="*******"
s_superAdminSamePasswdAgain="*******"
sl_superAdminPasswds=<Value Unspecified>
sl_superAdminPasswdsAgain=<Value Unspecified>
METALINK_USERNAME="[email protected]"
METALINK_PASSWORD="aBc124xx"
SECURITY_UPDATES_VIA_METALINK=false
DECLINE_SECURITY_UPDATES=true
COLLECTOR_UPGRADE=<Value Unspecified>
COLLECTOR_IGNORE_CONFIGURATION=<Value Unspecified>
COLLECTOR_IGNORE_FAILURES=<Value Unspecified>
COLLECTOR_USE_OBFUSCATED_PASSWORDS=<Value Unspecified>
COLLECTOR_RESPONSE_FILE=<Value Unspecified>
PROXY_HOST=<Value Unspecified>
PROXY_PORT=<Value Unspecified>
PROXY_USER=<Value Unspecified>
PROXY_PWD=<Value Unspecified>
n_performUpgrade=0
n_upgradeDB=0
s_dbOHSelectedForUpgrade=""
s_dbSIDSelectedForUpgrade=""
n_upgradeASM=0
s_dbSelectedUsesASM="no"
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
sl_upgradableSIDBInstances={}
sl_upgradableRACDBInstances={}
#Name : n_dbSelection
#Datatype : Number
#Description: row selected in the spread table of upgradable DB instances
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
n_dbSelection=0
#Name : b_stateOfUpgradeASMCheckbox
#Datatype : Boolean
#Description: stores the state of checkbox in UI
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
b_stateOfUpgradeASMCheckbox=false
#Name : b_stateOfUpgradeDBCheckbox
#Datatype : Boolean
#Description: stores the state of checkbox in UI
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
b_stateOfUpgradeDBCheckbox=false
#Name : b_oneClick
#Datatype : Boolean
#Description: Governs one-click behavior
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
b_oneClick=false
#Name : s_dlgASMCfgRedundancyValue
#Datatype : String
#Description: Redundancy Value
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
s_dlgASMCfgRedundancyValue=""
#Name : s_dlgASMCfgExistingFreeSpace
#Datatype : String
#Description: Existing Free Space
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
s_dlgASMCfgExistingFreeSpace="0"
#Name : s_dlgASMCfgNewDisksSize
#Datatype : String
#Description: New Disks Size
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
s_dlgASMCfgNewDisksSize=""
#Name : s_dlgASMCfgAdditionalSpaceNeeded
#Datatype : String
#Description: Additional Space Needed for ASM configuration
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
s_dlgASMCfgAdditionalSpaceNeeded="0 MB"
#Name : n_configTabSelected
#Datatype : Number
#Description: This determines the config tab selected in UI install.
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
n_configTabSelected=0
#Name : n_dbCharSetOption
#Datatype : Number
#Description: This determines the character set option selected in UI install.
#Component : oracle.server
# DO NOT MODIFY THE VALUE OF THIS VARIABLE #
n_dbCharSetOption=3 -
Silent Install of CS3 on Windows 7 64 Bit
Hello!
I am with a School District and need to package CS3 for deployment to a lab. The research that I've found makes it sound very easy using the line
"setup.exe" --mode=silent --deploymentFile="install.xml" --skipProcessCheck=1
and with our 32 bit XP machines it works great, no issues there. We also have machines that are Windows 7 x64 and the same command line does not work at all. With in a minute of execution it kills with exit error code 7.
I've found some other properties to add within the install.xml file
<Property name="INSTALLDIR">C:\Program Files (x86)\Adobe</Property>
<Property name="os64Bit">1</Property>
This unfortunately didn't work either. I'm not too surprised since in the log file it shows repeatedly that it is trying to install to program files (x86) anyway.
Can someone that has done the silent install on a 64 bit machine help me out at all (or anyone with any other ideas )??
Thanks for any help!!Hi skat,
Firstly i would advice windows 7 as such wont support,there are work arounds to install or mount on it but in long run it causes problems.64-bit is not supported for administration tool.
If it is other OS also admin tool should be installed only on 32-bit .......hope oracle releases it on 64-bit too in short time with only admin tool alone to get installed.
On windows 7 installation you get many blogs or forums to get installed.......Better to install on windows 2003/2008 server which output you better.
hope helps you understand.
Cheers,
KK
Maybe you are looking for
-
T430s - Unable to install Windows 8.1 update / Requires Rapidboot to be uninstalled
Hi folks, I'm trying to install the Windows 8.1 update on my Windows 8 Pro but I'm in front of an issue. After doing the check to perform the update, it does ask me to uninstall RapidBoot in order to perform the update. I've checked in my programs to
-
Skype mic will not work (windows 7 64-bit using re...
I recently built a new pc and everything has worked besides this. I have tried for a month to figure out what is the problem. No matter what I do I cannot get my mic in skype to work. The mic functions in everything but skype and it worked with skype
-
Hi, we are trying to printing some abap lists on both sides. ich have found some information about duplex printing of sapscript / smart forms, but nothing about printing of abap lists. Ich habe changed attribute printmode ( transaction SPAD ) of prin
-
Does anybody know if it is possible to use an swf file as a fill? So for instance you could embed the swf file into code then use it as a fill for an object and get an animated fill? Or is there another way to achieve something similar? Thank you in
-
Define FSDB repository in a Collaboration Room?
I have a CM Repository (pointing to fileserver, where the files are stored) Now, I want to create a room template, with an room extension to use this repository in "documents" section. I created the room template with room extension according this gu