Silverlight bug: Error code: 1001

Recently Silverlight stopped working on my machine. In my development environment (Visual Studio 2012) I was getting the following vague error message:
Line: 56
Error: Unhandled Error in Silverlight Application
Code: 1001   
Category: RuntimeError      
Message: 1001 An error has occurred.    
MethodName:     
Any websites I visited with Silverlight demos failed to load (only leaving a white space where the XAP should load)
I tried installing Firefox, the same errors were happening there.
I tried uninstalling and reinstalling.
I tried uninstalling the Silverlight 5 SDK and Silverlight 4 SDK.
None of this worked.
Eventually after wasting a day searching up on this, I came across a Silverlight bug reported back in 2012. Apparently this is still a bug today in 2015 with Silverlight 5.
Here are the details:
https://connect.microsoft.com/VisualStudio/feedback/details/719317/silverlight-5-error-1001-font-filename-issue
The fix was simple - I discovered a font file that had been recently installed. The font file name was Avenir.ttc but it contained versions of the font with & in the font name.
I uninstalled this font (using Control panel > Fonts) and Silverlight started working immediately.
If you ever have this issue, check your fonts directory!
Thanks Microsoft!

Hi,
Thanks for sharing this information to us, it will be very beneficial for other community members who have similar questions. From your description, you have encountered an issue that is similar with the
Silverlight 5 Error 1001 bug, if you could reproduce this bug again, I would suggest you submit a new feedback with the detail steps to let the Silverlight team to know this issue.
Best Regards,
Jambor   
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • CUCM 5.1.2 error code 1001

    Dear Expert,
    We have a Customer who is using CUCM 5.1.2 which Cisco does not support anymore. My customer logs in to CDR Analysis and Reporting monthly to retrieve call usage for every extension in the system. The customer goes to https://cucm/car and go to User Reports > Bills > Departments to do that.
    However, for the period from 1 Sept 2013 to 30 Sept 2013, the CAR returned an error message saying CDR data is only available up to 28 September 2013. This is the first time it happens, the customer has been doing this for years and they never have this problem.
    I then went on and disble the CDR Enabled Flag parameter, restarted the following services: Cisco CDR Agent, Cisco Database Layer Monitor, Cisco CDR Repository Manager, Cisco CAR Scheduler, Cisco SOAP - CDRonDemand Service, Cisco CAR Web Service, and re-enabled the CDR Enabled Flag parameter, hoping it would fix the issue. Unfortunately, after I did the above, I'm now encoutering Error Code 1001 when trying to access
    User Reports > Bills > Departments:
    I've done some research on the error code but could not find anything relevant.
    This is a very important function of my customer and it needs to be fixed. Cisco already refused to help. Could you please shed some lights on the issue?
    Thanks and regards,
    Nhan.

    Hi Nhan,
    Please check the following two bugs which are applicable to your version and try the workarounds listed
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsm34263
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsk76737
    Please note that the 'Reload all cdr' option listed in second bug will load only the cdr data for last 30 days and delete all prior data.
    HTH
    Manish

  • IMacros error= NS_ERROR_UNEXPECTED: Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref], line 3 (Error code: -1001)

    I use Imacros. I got this error NS_ERROR_UNEXPECTED: Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref], line 3 (Error code: -1001). I think it is because of this version of mozilla firefox 28.0. I read I should downgrade the version to 27, but I have read it is not safety. Will the problem will be resolve? if not I think I should take the risk...

    hello abmporras, please report the issue to the developer's of the addon through the support channels listed at https://addons.mozilla.org/firefox/addon/imacros-for-firefox/. they should be able to address the issue better.

  • Why am i getting error code 1001 when trying to use MyVerizon or Verizon Tones apps?

    I got the phone new this morning, updated Verizon Tones right away and tried to open it, error code 1001.  It just keeps trying to loop through and brings me back the error code every time.  I have tried to troubleshoot the problem myself, no luck, it is doing it in Safe Mode and whether I update Verizon Tones or not.

        Oh my! Let's take a closer look into the issue with you. Do you have a data connection? When you have the opportunity, please Clear Data / Cache via Settings > Application > Manage Applications > All
    YosefT_VZW
    Follow us on Twitter @VZWSupport

  • Error cod 1001?!

    at random points in different apps. i get error code 1001 then i get a buffer like image that says please wait while we prepare this application for use. its been goin on for over a week and i have no idea how to fix it. its incredibly annoying please help im using a Samsung galaxy s3/ 16gb blue.

        Hi twmcgill3,
    Let's look into this! What is your current zip code? Have you recently downloaded any new applications? Do you receive this error when accessing all web pages? I look forward to hearing from you soon.
    Thanks for your contribution to our community forums,
    AyaniB_VZW
    Follow us on Twitter @VZWSupport

  • Error Code 1001 with Backup Assistant apps

    This started a while ago, but I'm back on a Verizon network for a few days so I figured it would be easier to try to solve it now.
    I moved to Canada and have a Koodo sim card that I switch over to when I'm there. The first time I hopped borders (went back to the states for a few days then back to Canada), I had some APN issues and was looking into ways to remedy them, and thought I temporary uninstalled the Backup Assistant apps. Right now, Backup Assistant+ and Backup Assistant Contacts show up as 0.0 bytes in my Settings>Apps menu, but they don't appear to be accessible through the Verizon store.
    Every so often (and I can't trace when it happens, it's on both the Verizon and Koodo data networks and when I'm on Wifi and when my signal is at any strength), I get an error popping up that says "Sorry, we're having trouble connecting. Make sure you have a good signal and try again. If you still can't connect, call us at 800-922-0204. Error Code 1001"
    This is sometimes accompanied by a Backup Assistant Plus icon in my taskbar that tells me to "Tap here to configure your settings" - in the past, tapping it has only brought up a popup that says "Please wait while we connect..." or something, however I got the option to go to the app this time and it is currently stuck on the loading screen with a loading icon that says "Connecting" next to it.
    This happened in the last 2-3 minutes, so I haven't seen if the error stopped yet.
    Ideally, I want to be able to continue to backup my contacts with Verizon even on the Koodo APNs, which is what it seemed like I was able to do before I came back to the states. Any help to achieve this would be appreciated. Thanks!

        I understand the importance of being able to use your device to the fullest of its' capabilities ahwitz. Do you still have active service with us? Have you permanently relocated to Canada? Please be aware we only support devices that are permanently based in the United States. We do have global roaming options; however, that's on an occasional basis. If you are using a Verizon Wireless configured device outside the United States on another network, I'm sorry our control is limited.
    JonathanK_VZW
    VZW Support
    Follow Us on Twitter@VZWSupport

  • Adding Silverlight-enabled WCF Service failed with error code 50

    Hello everyone,
    I am very new to Silverlight ,and I am working on silverlight with WCF.
    When I tried to add a silverlight-enabled WCF service. I kept getting the error
       Method failed with unexpected error code 50.
    I am working with Silverlight 5 and VS 2013 ,I have no idea about it. I appreciate that if anyone can help?
    Thank you

    Hi,
    Please make sure your wcf is valid.
    Here are some resources which could help you:
    https://msdn.microsoft.com/library/cc838234(VS.95).aspx
    http://www.codeproject.com/Articles/262164/Using-WCF-Service-with-Silverlight#_articleTop
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • F110 Error - Information re. vendor 1000037 / paying company code 1001 ...

    Dear,
    All Experts.
    While doing F110 Payment Run I encountered with this error.
    It is proposal Log.
    Job started
    Step 001 started (program SAPF110S, variant &0000000000003, user ID 367207)
    Log for proposal run for payment on 27.09.2010, identification 1001T
    G/L account 113001 does not exist in company code 1001
    *Information re. vendor 1000037 / paying company code 1001 ...
    ... payment not possible because of reported error
    End of log
    Job finished
    How to determine this account RED line ?
    And GREEN color error is not complete, how to deal with this ?
    Where my configuration went wrong in FBZP ?
    Regards,
    Sharvari Joshi.

    Hi,
    Thanks for the reply.
    Could you please tell me what is the meaing of the error in GREEN color ?
    Regards,
    Sharvari Joshi.

  • I keep getting error code u44m1p34 when I try to update CC2014.  I've tried uninstalling several times completely to no avail.  Any ideas?  It's really bugging me now!

    I keep getting error code u44m1p34 when I try to update CC2014.  I've tried uninstalling several times completely to no avail.  Any ideas?  It's really bugging me now!

    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • Bug File/Direc​tory Info Error Codes

    I do not know if this has been reported before, but I could not find it on the discussion boards.
    When using the File/Directory Info Function an Error code of 1 is supposed to be returned if the file contains an invalid character, such as @ or ?. However, at least in LabVIEW 2013 this is not always true. In order to receive the correct error code the directory output of the function must be wired. I believe this is a bug. See attached snippet.
    When the Directory indicator is not wired it returns Error code 7, which indicates the file does not exist. While this is True, if one was using this function to determine if a file/directory name is valid, the wrong answer appears. Either way the function is inconsistent.
    Also attached is the vi.
    Cheers,
    mcduff
    Attachments:
    BugFileInfo.vi ‏16 KB
    BugFileInfo.vi ‏16 KB

    Hi mcduff,
    This is Mike Watts in Applications Engineering at National Instruments. Thanks for bringing this to our attention. I have not seen this one before. I am going to do some research to see if this behavior is expected, and if it is not expected, I will file a Corrective Action Request regarding this potential bug. I will update you if I learn something useful. Thanks!
    Regards,
    Mike Watts
    Product Marketing - Modular Instruments

  • HT4943 I subscribed for 3 months to a magazine and an error occurred while downloading - purchase validation failed (code:1001)  any ideas?

    I subscribed for 3 months to a magazine and an error occurred while downloading - purchase validation failed (code:1001)  any ideas?

    From an answer on the Web
    1001 (PurchaseValidationError)     
    This means your purchase failed.
    This occurs when attempting to download an Issue where the receipt used by the App and the receipt recorded by Apple are mismatched. Apple's server will report that the user is ineligible for the Issue and the download will fail.
    Contact support for a resolution - from your app press the help button on the bottom right, then feedback - follow the instructions from there.

  • DPS APP Builder Error Code 1

    Hello,
    I'm getting an Error Code 1 message when trying to download the test APP from the DPS APP Builder. I've tried re-building the document (a process that takes almost 8 hours in my case as our APP features 110 articles including almost 1000 images), updating it, generating new certificates and any other workaround mentioned in a previous discussion about this same subject. Nothing worked for me.
    The only workaround I haven't tried is deleting the folio from ~/Library/Preferences/StageManager.BD092818F67280F4B42B04877600987F01 11B594.1/Local Store/dmp.
    Apparently, there's nothing called "StageManager" in my MacBook Pro. Not in this route neither in any other route.
    Any idea about how to solve this? (if possible without re-building once again the whole document) We can't wait until the error code 1 bug is fixed in future Adobe updates as we need to submit the APP to Apple next week.
    Thanks for your time.

    Anyone can help??
    Update my latest experimental results.
    I found that issue was folio package related.
    Because when I use another folio package to the same app item in App Builder, this error message does not appear.
    But the original package in exchange, this error information occurs.
    Are there helpful to solve this problem?

  • The operation can't be completed... (error code -50)

    Couple of days ago I started getting this error message:
    +The operation can't be completed, because an unexpected error occurred (error code -50).+
    Once I get this error nothing works anymore on my Mac. I can't copy, paste, edit, save, etc. any documents - even those that I'm already working on. It's like the system locks. When I try to log in as another user, it doesn't load neither Dock not Finder. If I open Safari, it loads up without extensions and browsing doesn't work. It really seems like the OS doesn't have write access anymore.
    I've restored from a bootable backup that was 3 weeks old (cause I thought it was system related) but it didn't help. Could it be that it's a bug of 10.6.7?
    Any thoughts what it might be or how to get it fixed?
    I would really prefer not to to a clean install of SL.
    Thanks a lot!
    Marek

    Start your computer with the system disk, then run "Disk Utilities" to check/repair your disk and fix your permissions. If you still having problems, run "Apple Hardware Test" by holding down the "D" key when restarting your computer. Do a complete check of your hardware for problems.

  • MDB rollbacks and stops the listener port with error code 2072

    Hi
    We have a MDB listening on QUEUE1. This MDB processes the message and puts another message in QUEUE2. Transaction is "required" for this MDB.
    The processing could somtime take more than 2 min. We used to get EJB timeout error in this scenario. We changed EJB timeout to 5 min (default was 2 min). This resolved the timeout error. But it started throwing following exception. Note that if the processing takes less than 2 min, MDB never rollbacks.
    After this rollack, listener port can not pick up the next message and it throws error (MQJMS2002: failed to get message from MQ queue. MQ Error Code 2072) . It stops as a result and restarts after 60 sec. Even after restart it can not process the messages till we restart the JVM.
    Regarding error handling, Backout threshold is 3. If the message is redelivered, we discard this message.
    We are using 2 Phase commit for 2 resources MQ (5.3) and MS SQL.
    Websphere version is 5.1.
    Two issues here
    1. Why is MDB rolling back if processing takes more than 2 min.
    2. After the rollback, why is listener port not picking up the messages. Why do we need to recycle the JVM.
    Any pointers to resolve this issue?
    EXCEPTION
    [11/29/05 15:03:37:752 EST] 1b9bccc XATransaction E J2CA0027E: An exception occurred while invoking end on an XA Resource Adapter from dataSource JMS$postprocessor$JMSManagedConnection@25078403, within transaction ID {XID: formatId(57415344), gtrid_length(51), bqual_length(2, data(00000000000000950000000113238145f813eccfef12249c6aab206666f96901636c5f6170703130355f73656e7431715f716113238145f813eccfef12249c6aab206666f969010000000100000000)}: javax.transaction.xa.XAException: XA operation failed, see errorCode
    at com.ibm.mq.MQXAResource.end(MQXAResource.java:520)
    at com.ibm.ejs.jms.JMSManagedSession$JMSXAResource.end(JMSManagedSession.java:1557)
    at com.ibm.ejs.j2c.XATransactionWrapper.end(XATransactionWrapper.java:525)
    at com.ibm.ws.Transaction.JTA.JTAResourceBase.end(JTAResourceBase.java:253)
    at com.ibm.ws.Transaction.JTA.RegisteredResources.distributeEnd(RegisteredResources.java:629)
    at com.ibm.ws.Transaction.JTA.TransactionImpl.internalPrepare(TransactionImpl.java:1241)
    at com.ibm.ws.Transaction.JTA.TransactionImpl.commit(TransactionImpl.java:981)
    at com.ibm.ws.Transaction.JTA.TranManagerImpl.commit(TranManagerImpl.java:150)
    at com.ibm.ws.Transaction.JTA.TranManagerSet.commit(TranManagerSet.java:177)
    at com.ibm.ejs.csi.TranStrategy.commit(TranStrategy.java:712)
    at com.ibm.ejs.csi.TranStrategy.postInvoke(TranStrategy.java:167)
    at com.ibm.ejs.csi.TransactionControlImpl.postInvoke(TransactionControlImpl.java:570)
    at com.ibm.ejs.container.EJSContainer.postInvoke(EJSContainer.java:3068)
    at com.ibm.ejs.container.MDBWrapper.onMessage(MDBWrapper.java:102)
    at com.ibm.ejs.container.MDBWrapper.onMessage(MDBWrapper.java:127)
    at com.ibm.ejs.jms.listener.ServerSession.run(ServerSession.java:375)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:912)
    [11/29/05 15:03:38:089 EST] 1b9bccc ServerSession W WMSG0031E: Exception processing JMS Message for MDB BatchProcessorMDB, JMSDestination jms/PostprocessorQ : javax.ejb.TransactionRolledbackLocalException: ; nested exception is: com.ibm.ws.exception.WsEJBException
    com.ibm.ws.exception.WsEJBException
    at com.ibm.ejs.container.LocalExceptionMappingStrategy.mapException(LocalExceptionMappingStrategy.java:159)
    at com.ibm.ejs.container.LocalExceptionMappingStrategy.mapCSITransactionRolledBackException(LocalExceptionMappingStrategy.java:293)
    at com.ibm.ejs.container.EJSContainer.postInvoke(EJSContainer.java:3159)
    at com.ibm.ejs.container.MDBWrapper.onMessage(MDBWrapper.java:102)
    at com.ibm.ejs.container.MDBWrapper.onMessage(MDBWrapper.java:127)
    at com.ibm.ejs.jms.listener.ServerSession.run(ServerSession.java:375)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:912)
    javax.ejb.TransactionRolledbackLocalException: ; nested exception is: com.ibm.ws.exception.WsEJBException
    at com.ibm.ejs.container.LocalExceptionMappingStrategy.mapCSIException(LocalExceptionMappingStrategy.java:96)
    at com.ibm.ejs.container.LocalExceptionMappingStrategy.mapException(LocalExceptionMappingStrategy.java:165)
    at com.ibm.ejs.container.LocalExceptionMappingStrategy.mapCSITransactionRolledBackException(LocalExceptionMappingStrategy.java:293)
    at com.ibm.ejs.container.EJSContainer.postInvoke(EJSContainer.java:3159)
    at com.ibm.ejs.container.MDBWrapper.onMessage(MDBWrapper.java:102)
    at com.ibm.ejs.container.MDBWrapper.onMessage(MDBWrapper.java:127)
    at com.ibm.ejs.jms.listener.ServerSession.run(ServerSession.java:375)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:912)
    [11/29/05 15:03:38:124 EST] 1e9aa18 JMSExceptionL E WMSG0018E: Error on JMSConnection for MDB BatchProcessorMDB , JMSDestination jms/PostprocessorQ : javax.jms.JMSException: MQJMS2002: failed to get message from MQ queue
    at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:553)
    at com.ibm.mq.jms.MQSession.consume(MQSession.java:3144)
    at com.ibm.mq.jms.MQSession.run(MQSession.java:1585)
    at com.ibm.ejs.jms.JMSSessionHandle.run(JMSSessionHandle.java:924)
    at com.ibm.ejs.jms.listener.ServerSession.connectionConsumerOnMessage(ServerSession.java:752)
    at com.ibm.ejs.jms.listener.ServerSession.onMessage(ServerSession.java:527)
    at com.ibm.ejs.jms.listener.ServerSession.dispatch(ServerSession.java:494)
    at sun.reflect.GeneratedMethodAccessor40.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.ibm.ejs.jms.listener.ServerSessionDispatcher.dispatch(ServerSessionDispatcher.java:37)
    at com.ibm.ejs.container.MDBWrapper.onMessage(MDBWrapper.java:91)
    at com.ibm.ejs.container.MDBWrapper.onMessage(MDBWrapper.java:127)
    at com.ibm.ejs.jms.listener.ServerSession.run(ServerSession.java:375)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:912)
    ---- Begin backtrace for Nested Throwables
    com.ibm.mq.MQException: MQJE001: Completion Code 2, Reason 2072
    at com.ibm.mq.jms.MQSession.consume(MQSession.java:3118)
    at com.ibm.mq.jms.MQSession.run(MQSession.java:1585)
    at com.ibm.ejs.jms.JMSSessionHandle.run(JMSSessionHandle.java:924)
    at com.ibm.ejs.jms.listener.ServerSession.connectionConsumerOnMessage(ServerSession.java:752)
    at com.ibm.ejs.jms.listener.ServerSession.onMessage(ServerSession.java:527)
    at com.ibm.ejs.jms.listener.ServerSession.dispatch(ServerSession.java:494)
    at sun.reflect.GeneratedMethodAccessor40.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.ibm.ejs.jms.listener.ServerSessionDispatcher.dispatch(ServerSessionDispatcher.java:37)
    at com.ibm.ejs.container.MDBWrapper.onMessage(MDBWrapper.java:91)
    at com.ibm.ejs.container.MDBWrapper.onMessage(MDBWrapper.java:127)
    at com.ibm.ejs.jms.listener.ServerSession.run(ServerSession.java:375)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:912)
    [11/29/05 15:03:38:149 EST] 1e9aa18 JMSExceptionL E WMSG0057E: Error on JMSConnection for MDB BatchProcessorMDB , JMSDestination jms/PostprocessorQ , JMS Linked Exception : com.ibm.mq.MQException: MQJE001: Completion Code 2, Reason 2072
    at com.ibm.mq.jms.MQSession.consume(MQSession.java:3118)
    at com.ibm.mq.jms.MQSession.run(MQSession.java:1585)
    at com.ibm.ejs.jms.JMSSessionHandle.run(JMSSessionHandle.java:924)
    at com.ibm.ejs.jms.listener.ServerSession.connectionConsumerOnMessage(ServerSession.java:752)
    at com.ibm.ejs.jms.listener.ServerSession.onMessage(ServerSession.java:527)
    at com.ibm.ejs.jms.listener.ServerSession.dispatch(ServerSession.java:494)
    at sun.reflect.GeneratedMethodAccessor40.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.ibm.ejs.jms.listener.ServerSessionDispatcher.dispatch(ServerSessionDispatcher.java:37)
    at com.ibm.ejs.container.MDBWrapper.onMessage(MDBWrapper.java:91)
    at com.ibm.ejs.container.MDBWrapper.onMessage(MDBWrapper.java:127)
    at com.ibm.ejs.jms.listener.ServerSession.run(ServerSession.java:375)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:912)
    [11/29/05 15:03:38:190 EST] 1e9aa18 MDBListenerIm I WMSG0043I: MDB Listener ProcessorLP stopped for JMSDestination jms/PostprocessorQ
    [11/29/05 15:03:38:192 EST] 1e9aa18 MDBListenerIm I WMSG0058I: Listener Port ProcessorLP will attempt to restart in 60 seconds
    [11/29/05 15:03:38:194 EST] 1e9aa18 ConnectionEve A J2CA0056I: The Connection Manager received a fatal connection error from the Resource Adaptor for resource jms/PostprocessorQF. The exception which was received is javax.jms.JMSException: MQJMS2002: failed to get message from MQ queue
    [11/29/05 15:04:38:230 EST] 1436f66 MDBListenerIm I WMSG0042I: MDB Listener ProcessorLP started successfully for JMSDestination jms/PostprocessorQ

    Have been able to solve this problem? The same occurs in our environment. I have a nagging feelin git has something to do with a known bug that is solved in some fixpack or something. We're on Websphere 5.1.1.4.
    Any feedback would be appreciated.
    Thanks,
    Jaap

  • FS - Error code 3006 from SQL-Query

    Hello world!
    Can someone inform me which possible errors in a query cause the following error message after the query is activated?
    Internal Error (3006) Message [131-183]
    Until now I had only error code 1003, which signals syntax errors etc. in the query.
    By the way: Does anywhere exists a list of error codes/messages occuring in SAP B1?
    Thank you!
    Frank Romeni

    Error codes and their description can be found in SDK help files
    I have pasted them below for your ref
    -39
    End of File
    -43
    File not Found
    -47
    File is Busy
    -50
    File Cannot Open
    -51
    File Corrupted
    -99
    Division by Zero
    -100
    Out of Memory
    -101
    Print Error
    -103
    Print Canceled
    -104
    Money Overflow
    -111
    Invalid Memory Access
    -199
    General Error
    -213
    Bad Directory
    -214
    File Already Exists
    -216
    Invalid File Permission
    -217
    Invalid Path
    -1001
    Data Source - Bad Column Type
    -1003
    Data Source - Alias Not Found
    -1004
    Data Source - Value Not Found
    -1005
    Data Source - Bad Date
    -1012
    Data Source - No Default Column
    -1013
    Data Source - Zero/Blank Value
    -1015
    Data Source - Integer Overflow
    -1016
    Data Source - Bad Value
    -1022
    Data Source - Other File Not Related
    -1023
    Data Source - Other Key Not In Main Key
    -1025
    Data Source - Array Record Not Found
    -1027
    Data Source - Value Must Be Positive
    -1028
    Data Source - Value Must Be Negative
    -1029
    Data Source - Column Cannot be updated
    -1100
    Data Source - Cannot Allocate Environment
    -1101
    Data Source - Bad Connection
    -1102
    Data Source - Connection Not Opened
    -1103
    Data Source - DB Already Exists
    -1104
    Data Source - Cannot Create Database
    -1200
    Data Source - Data Bind General Error
    -2001
    Data Source - Bad Parameters
    -2003
    Data Source - Too Many Tables
    -2004
    Data Source - Table Not Found
    -2006
    Data Source - Bad Table Definition
    -2007
    Data Source - Bad Data Source
    -2010
    Data Source - Bad Data Source Offset
    -2013
    Data Source - No Fields In Table
    -2014
    Data Source - Bad Field Index
    -2015
    Data Source - Bad Index Number
    -2017
    Data Source - Bad Alias
    -2020
    Data Source - Bad Alias
    -2022
    Data Source - Bad Field Level
    -2024
    Data Source - Not Matching Data Source
    -2025
    Data Source - No Keys In Table
    -2027
    Data Source - Partial Data Found
    -2028
    Data Source - No Data Found
    -2029
    Data Source - No Matching Field
    -2035
    Data Source - Duplicate Keys
    -2038
    Data Source - Record Lock
    -2039
    Data Source - Data Was Changed
    -2045
    Data Source - End of Sort
    -2049
    Data Source - Not Opened for Write
    -2056
    Data Source - No Matching With Current Data Source
    -2062
    Data Source - Bad Container Offset
    -3001
    Query - Field Not Found
    -3003
    Query - Bad Data Source
    -3004
    Query - Bad Token
    -3005
    Query - Token After End
    -3006
    Query - Unexpected End
    -3008
    Query - Too Long Query
    -3009
    Query - Extra Right Parenthesis
    -3010
    Query - Missing Right Parenthesis
    -3012
    Query - No Operation Code
    -3013
    Query - No Field In Comparison
    -3014
    Query - Bad Condition
    -3015
    Query - Bad Sort List
    -3017
    Query - No String
    -3018
    Query - Too Many Fields
    -3019
    Query - Too Many Indexes
    -3020
    Query - Too Many Tables
    -3021
    Query - Reference Not Found
    -3022
    Query - Bad Range Set
    -3023
    Query - Bad Parsing
    -3025
    Query - Data Bind is Missing
    -3026
    Query - Bad Input
    -3027
    Query - Progress Aborted
    -3028
    Query - Bad Table Index
    -3032
    Query - General Failure
    -3033
    Query - Empty Record
    -3036
    Query - Bad Parameter
    -3037
    Query - Missing Table in List
    -3040
    Query - Bad Operation
    -3041
    Query - Bad Expression
    -3042
    Query - Name Already Exists
    -3044
    Query - Time Expired
    3001
    Form - Is Not Initialized
    3002
    Form - Bad Data Source
    3003
    Form - Exceeded Data Sources Limit
    3006
    Form - Invalid Form Item
    3007
    Form - Exceeded Forms Limit
    3009
    Form - Too Many Saved Data
    3012
    Form - Invalid Form
    3015
    Form - Cannot Get Multi-Line Edit
    3016
    Form - Bad Item Type
    3017
    Form - Bad Parameter
    3023
    Form - No Message Callback
    3029
    Form - Item Is Not Selectable
    3031
    Form - Bad Value
    3033
    Form - Item Not Found
    4007
    Grid - Invalid
    4008
    Grid - Bad Size
    4009
    Grid - No Data
    4011
    Grid - Invalid Parameters
    4013
    Grid - Not Super Title
    4014
    Grid - Super Title 2 Exits
    4015
    Bad Item Unique ID
    4016
    Grid - Bad Data
    4017
    Grid - Column is Already Folded
    4018
    Grid - Column is Already Expanded
    4019
    Grid - Line Exists
    4020
    Grid - Not Enough Data
    4022
    Grid - Super Title Exists
    4027
    Grid - Row Is Not Collapsible
    8004
    Status Bar - No Such Info
    8005
    Status Bar - Info Occupied
    8006
    Status Bar - No Message Bar
    8007
    Status Bar - Progress Stopped
    8008
    Status Bar - Too Many Progress
    5001
    Graph - Invalid
    5002
    Graph - Bad Form Item
    5005
    Graph - Bad Parameters
    -7008
    Form not found
    -7000
    Invalid Form
    -7031
    Form - Reserved /Illegal form Unique ID
    -7032
    Form - Invalid Mode
    -7006
    The item is not a user defined item and cannot be manipulated in such manner
    -7005
    Invalid table name
    -7004
    XML batch load failed
    -7003
    Menu operation Add failed
    -7002
    Function not supported
    -7001
    Invalid Item
    -7034
    Could not clear item in group
    -7033
    Out of boundaries
    -7020
    This method cannot be invoked by a Cell object
    -7019
    Invalid form unique ID. Should not begin with an F_ prefix
    -7018
    Invalid Field Value
    -7017
    Invalid Field Name
    -7016
    This datasource object is not a user-defined object
    -7015
    Invalid Column
    -7014
    A Column object with the specified unique ID already exists in the system.
    -7013
    The string value entered should be less then 10 characters.
    -7012
    An Item object with the specified unique ID already exists in the system.
    -7011
    The string value entered should be less then 11 characters.
    -7010
    A form with the requested unique ID already exists in the system.
    -7009
    The string value entered should be less the 32 characters.
    -7040
    Cannot Load XML File
    -7051
    Unexpected usage of the specified XML TAG.
    -7050
    This action type is not valid or not implemented yet.
    -7043
    Cannot load the Menu resource from the specified XML file.
    -7042
    Cannot load the Item resource from the specified XML file.
    -7041
    Cannot load the Form resource from the specified XML file.
    -7071
    Failed to create the items group.
    -7070
    UID
    -7069
    Failed to change the form current pane level.
    -7068
    Failed to change the form color.
    -7067
    Failed to change the Form mode.
    -7066
    Failed to fix the form default button.
    -7065
    Failed to change the form Visible state.
    -7064
    Could not change the form title.
    -7063
    The change of form dimensions has failed
    -7062
    Unknown Form attribute
    -7061
    XML batch resource update is not supported yet.
    -7060
    Reached Max Number of user data sources.
    -7094
    Failed to add the items child objects.
    -7093
    Failed to batch add the items
    -7092
    Failed to bind the item to the data source
    -7091
    Wrong Item Attribute
    -7090
    Unknown Field Type
    -7114
    Type of Column is Not Supported.
    -7113
    Failed to add the column child objects.
    -7112
    Failed to add the new columns.
    -7111
    Failed to bind the column to a data source
    -7110
    Invalid column attributes
    -7133
    The specified menu position is not valid
    -7132
    Invalid menu type
    -7131
    Failed to add the menu object
    -7130
    The specified menu already exists.
    -7030
    Invalid Row Number
    -7029
    Operation not supported on system form.
    -7028
    Out of boundary of DB data source offset.
    -7027
    The menu item is not a user defined menu item and cannot be manipulated in such manner.
    -7026
    Menu item was not found
    -7025
    Unknown Form State
    -7024
    Failed setting form bounds
    -7023
    Invalid Target
    -7022
    Could not commit action because the item is currently in focus.
    -7021
    Operation could not be set on extended edit text item.
    -7200
    Your connection string doesn't much UI development work mode.
    -7201
    The specified connection string is not valid.

Maybe you are looking for