SimAlliance Loader for JavaCards - Question

Hello everybody
I have a question about the SimAlliance Loader for Javacards. I found this tool at www.simalliance.org.
My question is about the "Memory Configuration", there are three fields to fill out.
1. Package Non Volatile Memory Size (in bytes)
2. Installation Non Volatile Memory Size (in bytes)
3. Installation Volatile Memory Size (in bytes)
as default is the value 00 00 what I have to put in there?
In the Help File I could find following description:
Memory configuration
Enter the memory space required by the applet to be loaded and installed.
Note:The default values proposed in the project settings are appropriate for most applets. It is therefore strongly recommended to leave these parameters unchanged.
Package Non Volatile Memory Size
If necessary, specify the size of the executable load file (package) generated by the selected Converter tool.
Installation Non Volatile Memory Size
If necessary, specify the number of bytes of EEPROM memory required to store the applet�s objects and data arrays.
Installation Volatile Memory Size
If necessary, specify the number of bytes of RAM memory required for the applet�s transient data.
Thanks in advance. Please post me a sample description.
Regards
Linga

Similar Messages

Error message 'The Outlook data file (.pst) failed to load for this session.' when adding PST in Outlook addin

Hi All,
I have an Outlook (2003-2013) addin developed using C# (NOT VSTO).
A new client (using the desktop client for Outlook 365) has got a COMException error message stating 'The Outlook data file (.pst) failed to load for this session.' at the code line where I add the PST store (using Microsoft.Office.Interop.Outlook.NameSpaceClass.AddStoreEx).
I have never come across this error message before and there is barely any mention of this message on any forums. The only question I could find regarding this has been asked mid 2014 and hasn't been answered.
I'm fairly sure this is not related to either DisablePST or PSTDisableGrow registry key settings as I check fore their existance and notify the user separately.
Could anyone help me out on how to resolve this? I do not know where to begin even.
Thanks!!
Cheers!

Hi Eugene,
Thanks for the reply.
I pass the location that the PST is to be created (as a string), and the OlStoreType.olStoreUnicode constant.
The client is using a network location to store the PST file (even though we advised them not to) - leading to many corrupt PST files (that they are apparently happy to live with), but this is the first time we came across this message.
I would assume the problem is with that file, as no other clients are having any issue like this.
Have you come across this error message? Do you know what sort of scenario could be responsible for it?
Or would I have to file it under "random problems generated by network PSTs"? :P
Cheers!

Websites loaded only with question marks.

Some websites are loaded only with question marks after I updated to Firefox 4.0.1. I have attached a screenshot in the link below.
[http://img64.imageshack.us/img64/2462/wmarks.png http://img64.imageshack.us/img64/2462/wmarks.png]

Update Skype to the latest version. The one you have installed at the moment is incompatible with Firefox. See https://www.mozilla.com/en-US/blocklist/
In addition, go to Add-ons | Extensions and disable "BitDefender Antiphishing Toolbar". Test your sites where you get the question marks to see if it rectifies the problem. If it doesn't, you can re-enable it again.
Do the same with the Conduit Engine.
Install Java 1.6.0_25 via http://www.java.com/en/ and then remove all previous versions. Older versions are a security risk. Uninstall via Add/Remove Programs.
Install VLC 1.1.9 via http://www.videolan.org
The version you have on your system exposes your machine to attack. Actually, version 1.1.9 is also insecure, but not as bad as the one you have installed. See [http://www.h-online.com/open/news/item/VLC-Media-Player-1-1-9-closes-security-holes-1226673.html VLC Media Player 1.1.9 closes security holes] ''and'' [http://www.h-online.com/open/news/item/A-new-security-flaw-hits-VLC-1225820.html A new security flaw hits VLC]
You'll just have to keep an eye on the videolan.org site for when they release a new patch.
If the problem persists, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

Portal Landscape - With 2 CSM (load balance) related question

Hi,
We are currently having a portal landscape (Dev, QA -2 app servers, PRD - 4 app servers). The load balancing happens on Production Portal using CSM (load balancer) and it does SSL offloading for security encryption and it lands onto one of the application servers. When we try to login to portal it authenticates using the LDAP (OID). And we have some links which takes to backend R/3, BW etc (we use SAP load balance using SMLG logon group)
Now due to another special project the following is what we are planning:
1. Adding couple of more application servers for production portal or having seperate second portal landscape itself
2. Adding couple of more application servers for R/3 production server (load balance can be done with special logon group for that)
Questions are:
1. When we land into current production portal page and click a iview link for the special project it should go only to those special portal app servers (planning to do through another CSM) and from their to backend R/3. In this scenario how the authentication (or sso ticket) happens when it goes from CSM to another CSM, will it ask for login again or any issue will happen with SSO ticket ?
2. If we decide to go for second portal landscape and in the same scenario when login to current prod portal page and click a iview link for the special project it should go to that another production portal,in that case what will happen to the login authentication happened through the first portal and SSO ticket ?
3. Suppose if we go to the second production portal directly through a website and if the user tries to login using the same id to first portal how portal will deal in terms of security (SSO) and also how backend R/3 will behave when same id comes as part of SSO.
Or if anyone thinks of any other issue apart from SSO or encryption related things which i need to be aware of, kindly let me know.
Thanks,
Murali.

I am not sure what CSM is, but I would expect it only does ssl offloading and a sort of "reverse proxy" against the cluster.
>1. When we land into current production portal page and click a iview link for the special project it should go only to those special portal app servers (planning to do through another CSM) and from their to backend R/3. In this >scenario how the authentication (or sso ticket) happens when it goes from CSM to another CSM, will it ask for login again or any issue will happen with SSO ticket ?
This depends on the host name you use for the two CSM clusters. If they have the same subdomain, there should be no problem as the SAP Logon Ticket (MYSAPSSO2) cookie is issued to the sub domain of the portal.
If they do not have the same subdomain, the second CSM cluster will receive the request without the MYSAPSSO2 cookie, and will therefore trigger reauthentication.
>2. If we decide to go for second portal landscape and in the same scenario when login to current prod portal page and click a iview link for the special project it should go to that another production portal,in that case what will >happen to the login authentication happened through the first portal and SSO ticket ?
It will fail, as the MYSAPSSO2 cookie from the first portal is not recognized in the second. However, you can easily setup so that the second portal trusts the first and does a logon based on its credentials
>3. Suppose if we go to the second production portal directly through a website and if the user tries to login using the same id to first portal how portal will deal in terms of security (SSO) and also how backend R/3 will behave >when same id comes as part of SSO.
I assume both portal will be setup against the same LDAP/UME source. Therefore it will allow the logon. The backend systems should trust both the first and second portal (STRUSTSSO2 transaction)
I think your architecture choice comes down to if the new project has special considerations with regards to versioning of portal. If it does, it would be sensible to separate it into a separate portal (and you can always integrate them with the first portal through portal federation if you have a relatively new version).
Regards
Dagfinn

I am trying to export a pdf to word but the document keeps "loading " for a long period of time and won't complete?

I am trying to export a pdf to word but the document keeps "loading " for a long period of time and won't complete?

Hi Jennee,
You're using the Save As > Microsoft Word command in Acrobat (and what version are you using)? At what point does the status bar in the lower-right corner hang up (Pre-processing, Recontructing, and so on)? What type of content is there in the PDF, and how large is it? Are you having Acrobat run OCR on the file as it converts (you can check this by clicking Settings in the Save As dialog box)? Do you have trouble saving other PDF files as Word documents?
A lot of questions, I know. But I need to know a bit more about the document to determine why it's hanging up on export.
Thanks
Sara

Disable Lazy Loading for Navigation Properties on Entities in EF 5

Hello all,
Can we disable Lazy Loading for Navigation properties on any entity?
If yes, how we can achieve the same.
Thanks,
Naresh

Hi Naresh;
If you are using code first you can do the following to turn off Lazy loading for a given navigation property. For example
lets say we have a Customers table and a Orders table and a Customer can have 1 to many Orders the following POCO class has a ICollection that is mark as virtual, This causes Lazy loading to happen when a property of order is accessed.
// Lazy Loading Enabled
public class Customers
public int Id { get; set; }
public string Name { get; set; }
public virtual ICollection<Order> Orders { get; set; }
To turn off Lazy loading remove the virtual key word as follows:
// Lazy Loading Is Disabled
public class Customers
public int Id { get; set; }
public string Name { get; set; }
public ICollection<Order> Orders { get; set; }
To turn of Lazy Loading for all entities using Code First you can do the following in the constructor of the DbContext.
public class MyContext : DbContext
public MyContext()
this.Configuration.LazyLoadingEnabled = false;
If the above does not meet your needs please tell us what version of the Entity Framework, which context type you are using, for example ObjectContext or DbContext, and which modeling you are using such as Code First, Model First or Database First.
Fernando (MCSD)
If a post answers your question, please click "Mark As Answer" on that post and "Mark as Helpful".

Set-up application not loading for Creative Cloud. Can anyone advise?

Set-up application not loading for Creative Cloud. Can anyone advise?

Please elaborate the issue and Supply pertinent information for quicker answers:
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.
~ Arpit

Screen Shots not loading for various browsers

I am accessing BrowserLab through Dreamweaver CS5 running on MAC OS 10.6.6. There is no problem signing in however when I choose a browser to view a screenshot it times out telling me that the Browser version has "failed to load. The screenshot cannot be loaded for the following reasons: page error". When I click on the Retry button, I get another message saying that "the screen shot was cancelled".
This happens for either MAC or Windows browser versions but not consistently. When I first sign in, I can get at least one screen shot to show up but when I request a different browser, I get the error message. This is a simple XHTML, CSS file.
Any ideas what I'm doing wrong? Thanks.

Hi Tom,
A few questions:
Are you requesting a local or server preview of the files from Dreamweaver (from the dropdown in the BrowserLab panel in DW)?
Do you still see the same issue with screenshots if you test a public url (e.g. yahoo.com, etc) from within the BrowserLab interface?
After you make the request from DW, don't switch to BL. Do you see any dialog appear within DW asking for permission to access files?
Is it consistently the same browser(s) you're having issues with? And if so, which ones? Have you tried others to see if you get the same messages?
As I understand it, you're making the request from DW, then adding more browsers to your browser set later. Can you try modifying your default browser set to include all the browsers you want to preview, then shut down BL and try the preview again?
Thanks,
Mark

Pls provide answers for my question though my question is basic please....

Dear friends,
Greets...........................
       Pls provide apt definitions for my question though my question is basic please....
1.Exactly how many language does SAP supports all over the world ?
2.Purpose of text symbols ?
3.Write a program to display text as " Ajay's Father ".
4.Waht is the latest version in SAP now ?
5.How many maximum no of break points we can have in a program ?
6.SubObjects of an ABAP program ?
7.Program name to list the symbols ?
8.Difference between internal table with header and without header line ?
9..Difference between SY-TABIX and SY-INDEX ?
10.What is the structure of the internal table when select-options is declared ?
                   Thanks in Advance....................
Regards
Raj kumar

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'. Please be patient waiting for the return
          phone call. It will come in time depending on how heavily the servers are being hit.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Can any one give me answer for these questions

Can any one give me answer for these questions. I got these questions from net plz post the answers you know
ABAP CERTIFICATION QUESTIONS
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
78. The TABLES statement declares a data object.
A: True
B: False
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: Value

ANSWERS :
1. If a table does not have MANDT as part of the primary key, it is ____.
A: A structure
B: Invalid
C: Client-independent
D: Not mandatory
Ans : C
2. In regard to CALL, which of the following is NOT a valid statement?
A: CALL FUNCTION
B: CALL SCREEN
C: CALL TRANSACTION
D: CALL PROGRAM
Ans : D
3. Name the type of ABAP Dictionary table that has these characteristics:
Same number of fields as the database table
Same name as database table
Maps 1:1 to database table
A: Pooled
B: Cluster
C: Transparent
D: View
Ans : C
4. An event starts with an event keyword and ends with:
A: Program execution.
B: END-OF-EVENT.
C: Another event keyword.
D: END-EVENT.
Ans: C
5. What is the system field for the current date?
A: SY-DATUM
B: SY-DATE
C: SY-DATID
D: SY-SDATE
Ans : A
6. The following code indicates:
SELECT fld1 fld2 FROM tab1 APPENDING TABLE itab
WHERE fld1 IN sfld1.
A: Add rows to the existing rows of itab.
B: Add rows to itab after first deleting any existing rows of itab.
C: Select rows from tab1 for matching itab entries.
D: Nothing, this is a syntax error.
Ans : B
7. You may change the following data object as shown below so that it equals 3.14.
CONSTANTS: PI type P decimals 2 value '3.1'.
PI = '3.14'.
A: True
B: False
Ans : B
8. The SAP service that ensures data integrity by handling locking is called:
A: Update
B: Dialog
C: Enqueue/Dequeue
D: Spool
Ans : C
9. Which of these sentences most accurately describes the GET VBAK LATE. event?
A: This event is processed before the second time the GET VBAK event is processed.
B: This event is processed after all occurrences of the GET VBAK event are completed.
C: This event will only be processed after the user has selected a basic list row.
D: This event is only processed if no records are selected from table VBAK.
Ans :
10. Which of the following is not a true statement in regard to a hashed internal table type?
A: Its key must always be UNIQUE.
B: May only be accessed by its key.
C: Response time for accessing a row depends on the number of entries in the table.
D: Declared using internal table type HASHED TABLE.
Ans : C
11. TO include database-specific SQL statements within an ABAP program, code them between:
A: NATIVE SQL_ENDNATIVE.
B: DB SQL_ENDDB.
C: SELECT_ENDSELECT.
D: EXEC SQL_ENDEXEC.
Ans : D
12. To measure how long a block of code runs, use the ABAP statement:
A: GET TIME .
B: SET TIME FIELD .
C: GET RUN TIME FIELD .
D: SET CURSOR FIELD .
Ans : C
13. When a secondary list is being processed, the data of the basic list is available by default.
A: True
B: False
Ans : B
14. Given:
DATA: BEGIN OF itab OCCURS 10,
qty type I,
END OF itab.
DO 25 TIMES. itab-qty = sy-index. APPEND itab. ENDDO.
LOOP AT itab WHERE qty > 10.
WRITE: /1 itab-qty.
ENDLOOP.
This will result in:
A: Output of only those itab rows with a qty field less than 10
B: Output of the first 10 itab rows with a qty field greater than 10
C: A syntax error
D: None of the above
Ans : B
15. After a DESCRIBE TABLE statement SY-TFILL will contain
A: The number of rows in the internal table.
B: The current OCCURS value.
C: Zero, if the table contains one or more rows.
D: The length of the internal table row structure.
Ans ; A
16. You may declare your own internal table type using the TYPES keyword.
A: True
B: False
Ans : A
17. After adding rows to an internal table with COLLECT, you should avoid adding more rows with APPEND.
A: True
B: False
Ans : A
18. Which of the following is not a component of control break processing when looping at an internal table?
A: AT START OF
B: AT FIRST
C: AT LAST
D: AT NEW
Ans : A
19. A dictionary table is made available for use within an ABAP program via the TABLES statement.
A: True
B: False
Ans : A
20. Which of the following would be best for hiding further selection criteria until a function is chosen?
A: AT NEW SELECTION-SCREEN
B: SELECTION-SCREEN AT LINE-SELECTION
C: SUBMIT SELECTION-SCREEN
D: CALL SELECTION-SCREEN
Ans : D
21. What must you code in the flow logic to prevent a module from being called unless a field contains a non-initial value (as determined by its data type)?
A: ON INPUT
B: CHAIN
C: FIELD
D: ON REQUEST
Ans : A
22. The AT USER-COMMAND event is triggered by functions defined in the ____.
A: screen painter
B: ABAP report
C: menu painter status
D: ABAP Dictionary
Ans : C
23. In regard to a function group, which of the following is NOT a true statement?
A: Combines similar function modules.
B: Shares global data with all its function modules.
C: Exists within the ABAP workbench as an include program.
D: Shares subroutines with all its function modules.
Ans ; C
24. In regard to SET PF-STATUS, you can deactivate unwanted function codes by using ____.
A: EXCLUDING
B: IMMEDIATELY
C: WITHOUT
D: HIDE
Ans : A
25. In regard to data transported in PAI when the FIELD statement is used, which of the following is NOT a true statement?
A: Fields in PBO are transported directly from PAI.
B: Fields with identical names are transported to the ABAP side.
C: Fields not defined in FIELD statements are transported first.
D: Fields that are defined in FIELD statements are transported when their corresponding module is called.
Ans ; C
26. The order in which an event appears in the ABAP code determines when the event is processed.
A: True
B: False
Ans : B
27. A field declared as type T has the following internal representation:
A: SSMMHH
B: HHMMSS
C: MMHHSS
D: HHSSMM
Ans : B
28. Which of the following is NOT a component of the default standard ABAP report header?
A: Date and Time
B: List title
C: Page number
D: Underline
Ans ; A
29. Assuming a pushbutton with function code 'FUNC' is available in the toolbar of a list report, what event is processed when the button is clicked?
A: AT USER-COMMAND.
B: AT PFn.
C: AT SELECTION-SCREEN.
D: END-OF-SELECTION.
Ans : A
30. In regard to field selection, what option of the SELECT statement is required?
A: FOR ALL ENTRIES
B: WHERE
C: INTO
D: MOVE-CORRESPONDING
Ans : B
31. The following program outputs what?
report zjgtest1
write: /1 'Ready_'.
PARAMETER: test.
INITIALIZATION.
write: /1 'Set_'.
START-OF-SELECTION.
write: /1 'GO!!'.
A: Set_ GO!! (each on its own line)
B: Set_ Ready_ GO!! (all on their own lines)
C: Ready_ GO!! (each on its own line)
D: Ready_ Set_ GO!! (all on their own lines)
Ans : C
32. To declare a selection criterion that does not appear on the selection screen, use:
A: NO-DISPLAY
B: INVISIBLE
C: MODIF ID
D: OBLIGATORY
Ans : A
33. An internal table that is nested within another internal table should not contain a header line.
A: True
B: False
Ans : B
34. What is output by the following code?
DATA: BEGIN OF itab OCCURS 0, letter type c, END OF itab.
itab-letter = 'A'. APPEND itab. itab-letter = 'B'. APPEND itab.
itab-letter = 'C'. APPEND itab. itab-letter = 'D'. APPEND itab.
LOOP AT itab.
SY-TABIX = 2.
WRITE itab-letter.
EXIT.
ENDLOOP.
A: A
B: A B C D
C: B
D: B C D
Ans : A
35. To select all database entries for a certain WHERE clause into an internal table in one step, use
A: SELECT_INTO TABLE itab_
B: SELECT_INTO itab_
C: SELECT_APPENDING itab
D: SELECT_itab_
36. After a successful SELECT statement, what does SY-SUBRC equal?
A: 0
B: 4
C: 8
D: Null
Ans : A
37. This selection screen syntax forces the user to input a value:
A: REQUIRED-ENTRY
B: OBLIGATORY
C: DEFAULT
D: SELECTION-SCREEN EXCLUDE
Ans : B
38. If the following code results in a syntax error, the remedy is:
DATA: itab TYPE SORTED TABLE OF rec_type WITH UNIQUE KEY field1
WITH HEADER LINE.
itab-field1 = 'Company'. itab-field2 = '1234'. INSERT TABLE itab.
itab-field1 = 'Bank'. itab-field2 = 'ABC'. INSERT TABLE itab.
SORT itab.
LOOP AT itab.
write: /1 itab-field1, itab-field2.
ENDLOOP.
A: There is no syntax error here
B: Remove the SORT statement
C: Change INSERT to APPEND
D: Add a WHERE clause to the loop
Ans :
39. If this code results in an error, the remedy is:
SELECT fld1 fld2 FROM tab1 WHERE fld3 = pfld3.
WRITE: /1 tab1-fld1, tab1-fld2.
ENDSELECT.
A: Add a SY-SUBRC check.
B: Change the WHERE clause to use fld1 or fld2.
C: Remove the /1 from the WRITE statement.
D: Add INTO (tab1-fld1, tab1-fld2).
Ans : D
40. When modifying an internal table within LOOP AT itab. _ ENDLOOP. you must include an index number.
A: True
B: False
Ans : A
41. To allow the user to enter values on the screen for a list field, use:
A: OPEN LINE.
B: SET CURSOR FIELD.
C: WRITE fld AS INPUT FIELD.
D: FORMAT INPUT ON.
Ans : C
42. Before a function module may be tested, it must first be:
A: Linked
B: Authorized
C: Released
D: Active
Ans : D
43. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
Ans : B
44. If a table contains many duplicate values for a field, minimize the number of records returned by using this SELECT statement addition.
A: MIN
B: ORDER BY
C: DISTINCT
D: DELETE
Ans : C
45. The system internal table used for dynamic screen modification is named:
A: ITAB
B: SCREEN
C: MODTAB
D: SMOD
Ans : B
46. Within the source code of a function module, errors are handled via the keyword:
A: EXCEPTION
B: RAISE
C: STOP
D: ABEND
Ans : A
47. Which system field contains the contents of a selected line?
A: SY-CUCOL
B: SY-LILLI
C: SY-CUROW
D: SY-LISEL
Ans : D
48. The following statement writes what type of data object?
WRITE: /1 'Total Amount:'.
A: Text literal
B: Text variable
C: In-code comment
D: Text integer
Ans : A
49. For the code below, second_field is of what data type?
DATA: first_field type P, second_field like first_field.
A: P
B: C
C: N
D: D
Ans : A
50. Which of the following describes the internal representation of a type D data object?
A: DDMMYYYY
B: YYYYDDMM
C: MMDDYYYY
D: YYYYMMDD
Ans : A
51. A BDC program is used for all of the following except:
A: Downloading data to a local file
B: Data interfaces between SAP and external systems
C: Initial data transfer
D: Entering a large amount of data
Ans : A
52. In regard to PERFORM, which of the following is NOT a true statement?
A: May be used within a subroutine.
B: Requires actual parameters.
C: Recursive calls are allowed in ABAP.
D: Can call a subroutine in another program.
Ans : B
53. What is the transaction code for the ABAP Editor?
A: SE11
B: SE38
C: SE36
D: SE16
Ans : B
54. In regard to HIDE, which of the following is NOT a true statement?
A: Saves the contents of variables in relation to a list line's row number.
B: The hidden variables must be output on a list line.
C: The HIDE area is retrieved when using the READ LINE statement.
D: The HIDE area is retrieved when an interactive event is triggered.
Ans : B
55. Database locks are sufficient in a multi-user environment.
A: True
B: False
Ans : B
56. The complete technical definition of a table field is determined by the field's:
A: Domain
B: Field name
C: Data type
D: Data element
Ans : A
57. In regard to LEAVE, which of the following is NOT a true statement?
A: May be used to return immediately to a calling program.
B: May be used to stop the current loop pass and get the next.
C: May be used to start a new transaction.
D: May be used to go to the next screen.
Ans : B
58. The following code indicates:
SELECT fld6 fld3 fld2 fld1 FROM tab1 INTO CORRESPONDING FIELDS OF TABLE itab
WHERE fld3 = pfld3.
A: The order of the fields in itab does not matter.
B: Fill the header line of itab, but not the body.
C: Table itab can only contain fields also in table tab1.
D: None of the above.
Ans : C
59. The ABAP statement below indicates that the program should continue with the next line of code if the internal table itab:
CHECK NOT itab[] IS INITIAL.
A: Contains no rows
B: Contains at least one row
C: Has a header line
D: Has an empty header line
Ans : B
60. What will be output by the following code?
DATA: BEGIN OF itab OCCURS 0, fval type i, END OF itab.
itab-fval = 1. APPEND itab.
itab-fval = 2. APPEND itab.
FREE itab.
WRITE: /1 itab-fval.
A: 2
B: 0
C: blank
D: 1
Ans : A
61. To allow the user to enter a range of values on a selection screen, use the ABAP keyword:
A: DATA.
B: RANGES.
C: PARAMETERS.
D: SELECT-OPTIONS.
Ans : D
62. If an internal table is declared without a header line, what else must you declare to work with the table's rows?
A: Another internal table with a header line.
B: A work area with the same structure as the internal table.
C: An internal table type using the TYPES statement.
D: A PARAMETER.
Ans : B
63. Assuming an internal table contains 2000 entries, how many entries will it have after the following line of code is executed?
DELETE itab FROM 1500 TO 1700.
A: This is a syntax error.
B: 1801
C: 1800
D: 1799
Ans : A
64. To remove lines from a database table, use ____.
A: UPDATE
B: MODIFY
C: ERASE
D: DELETE
Ans : D
65. All of the following may be performed using SET CURSOR except:
A: Move the cursor to a specific field on a list.
B: Move the cursor to a specific list line.
C: Move the cursor to a specific pushbutton, activating that function.
D: Move the cursor to a specific row and column on a list.
Ans : C
66. When is it optional to pass an actual parameter to a required formal parameter of a function module?
A: The actual parameter is type C.
B: The formal parameter contains a default value.
C: The formal parameter's \"Reference\" attribute is turned on.
D: It is never optional.
Ans : B
67. Coding two INITIALIZATION events will cause a syntax error.
A: True
B: False
Ans : B
68. Adding a COMMIT WORK statement between SELECT_ENDSELECT is a good method for improving performance.
A: True
B: False
Ans : B
69. To save information on a list line for use after the line is selected, use this keyword.
A: APPEND
B: EXPORT
C: WRITE
D: HIDE
Ans : D
70. To bypass automatic field input checks, include this in PAI.
A: AT EXIT-COMMAND
B: ON INPUT
C: ON REQUEST
D: LEAVE TO SCREEN 0.
Ans : A
71. Within a function module's source code, if the MESSAGE_RAISING statement is executed, all of the following system fields are filled automatically except:
A: SY-MSGTY
B: SY-MSGNO
C: SY-MSGV1
D: SY-MSGWA
Ans : D
72. The following code indicates:
REPORT ZLISTTST.
START-OF-SELECTION.
WRITE: text-001.
FORMAT HOTSPOT ON.
WRITE: text-002.
FORMAT HOTSPOT OFF.
AT LINE-SELECTION.
WRITE / text-003.
A: Text-002 may not be selected.
B: The value of text-002 is stored in a special memory area.
C: Text-002 may be clicked once to trigger the output of text-003.
D: None of the above.
Ans : C
73. The ____ type of ABAP Dictionary view consists of one or more transparent tables and may be accessed by an ABAP program using Open SQL.
A: Database view
B: Projection view
C: Help view
D: Entity view
Ans : A
74. A concrete field is associated with a field-symbol via ABAP keyword
A: MOVE
B: WRITE
C: ASSIGN
D: VALUE
Ans : C
75. The output for the following code will be:
report zabaprg.
DATA: char_field type C.
char_field = 'ABAP data'.
WRITE char_field.
A: ABAP data
B: A
C: Nothing, there is a syntax error
D: None of the above
Ans : B
76. Page footers are coded in the event:
A: TOP-OF-PAGE.
B: END-OF-SELECTION.
C: NEW-PAGE.
D: END-OF-PAGE.
Ans : D
77. The event AT SELECTION-SCREEN OUTPUT. occurs before the selection screen is displayed and is the best event for assigning default values to selection criteria.
A: True
B: False
Ans : B
78. The TABLES statement declares a data object.
A: True
B: False
Ans : A
79. Assuming tab1-fld7 is not a key field, how can you prevent reading all the table rows?
SELECT fld1 fld2 fld3 FROM tab1 INTO (fld4, fld5, fld6)
WHERE fld7 = pfld7.
WRITE: /1 fld4, fld5, fld6.
ENDSELECT.
A: Take fld7 out of the WHERE clause.
B: Create an index in the ABAP Dictionary for tab1-fld7.
C: Use INTO TABLE instead of just INTO.
D: Take the WRITE statement out of the SELECT_ENDSELECT.
Ans :
80. Which of the following is NOT a required attribute when creating an ABAP program?
A: Application
B: Title
C: Status
D: Type
Ans : A
81. When creating a transparent table in the ABAP Dictionary, which step automatically creates the table in the underlying database?
A: Adding technical settings to the table
B: Checking the table syntax
C: Saving the table
D: Activating the table
Ans : D
82. Within the ABAP program attributes, Type = 1 represents:
A: INCLUDE program
B: Online program
C: Module pool
D: Function group
E: Subroutine pool
Ans : B
83. If this code results in an error, the remedy is:
SELECT fld1 SUM( fld1 ) FROM tab1 INTO_
A: Remove the spaces from SUM( fld1 ).
B: Move SUM( fld1 ) before fld1.
C: Add GROUP BY f1.
D: Change to SUM( DISTINCT f1 ).
Ans : C
84. Which keyword adds rows to an internal table while accumulating numeric values?
A: INSERT
B: APPEND
C: COLLECT
D: GROUP
Ans : C
85. Assuming itab has a header line, what will be output by the following code?
READ TABLE itab INDEX 3 TRANSPORTING field1.
WRITE: /1 itab-field1, itab-field2.
A: The contents of the third row's itab-field1.
B: The contents of the third row's itab-field1 and itab-field2.
C: The contents of the third row's itab-field2.
D: Nothing.
Ans ; A
86. The following code indicates:
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: myparam(10) type C,
Myparam2(10) type N,
SELECTION-SCREEN END OF BLOCK.
A: Draw a box around myparam and myparam2 on the selection screen.
B: Allow myparam and myparam2 to be ready for input during an error dialog.
C: Do not display myparam and myparam2 on the selection screen.
D: Display myparam and myparam2 only if both fields have default values.
Ans : A
87. Which statement will sort the data of an internal table with fields FRUIT, QTY, and PRICE so that it appears as follows?
FRUIT QTY PRICE
Apples 12 22.50
Apples 9 18.25
Oranges 15 17.35
Bananas 20 10.20
Bananas 15 6.89
Bananas 5 2.75
A: SORT itab DESCENDING BY QTY PRICE.
B: SORT itab BY PRICE FRUIT.
C: SORT itab.
D: SORT itab BY PRICE DESCENDING.
Ans : D
88. Which keyword adds a line anywhere within an internal table?
A: APPEND
B: MODIFY
C: ADD
D: INSERT
Ans : D
89. To read a single line of an internal table, use the following:
A: LOOP AT itab. _ ENDLOOP.
B: READ itab.
C: SELECT SINGLE * FROM itab.
D: READ TABLE itab.
Ans : D
90. Which Open SQL statement should not be used with cluster databases?
A: UPDATE
B: MODIFY
C: DELETE
D: INSERT
Ans :
91. To include a field on your screen that is not in the ABAP Dictionary, which include program should contain the data declaration for the field?
A: PBO module include program
B: TOP include program
C: PAI module include program
D: Subroutine include program
Ans : B
92. This flow logic statement is used to make multiple fields open for input after an error or warning message.
A: GROUP
B: FIELD-GROUP
C: CHAIN
D: LOOP AT SCREEN
Ans ; C
93. Given:
PERFORM subroutine USING var.
The var field is known as what type of parameter?
A: Formal
B: Actual
C: Static
D: Value
Ans : B

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

Customized User Profiles not loading for Network Users

I manage Macs in public computer labs and classrooms at a university. My general set up is as follows:
Clients are running 10.8.5, OD Masters are running 10.7.5. Open Directory Master to manage client preferences for Login window and screen saver. Clients bind to Active Directory for authentication purposes only. Networked users home directories are stored locally then deleted at log out. Using Deploy Studio to image and restore clients.
My customized user profiles are stored in /User Templates/Non_Localized.lproj.(I also update English.lproj for any local users that may need to be created for various reasons).
Recently I have come across a situation where, randomly, my customized user profile does not load at Login, and I am given the out-of-the-box default Apple profile. This is happening in 11 of my 14 labs. I have three labs that seem to not be affected by this.
On some labs I manage the DHCP, some labs I do not, and rely on our Networking group to supply DHCP and DNS. Because of this setup I have six different DNS server that may be in the mix. Two are Unix boxes, the other four are the Active Directory Domain Control servers. I did create a spreadsheet of all the AD/OD settings for each lab to see if I could find some kind of pattern, but don't see a way to upload it.
The one thing I do notice is that when I do a mass login using a shell script via Apple Remote Desktop, when the profile fails to build correctly, the user login is quick, much quicker than when the correct profile loads. Almost as if a packet is sent the the OD server, it's rejected, and bam, Apple's default profile loads.
I have flushed the DNS cache of the local clients using killall --HUP mDNSResponder
I've got one week to figure this out before classes start, so if you have a clue as to what's going on, I sure would be grateful.
Here are logs from both the admin's account and the user's account when the default profile fails to build:
ADMIN log:
8/20/14 1:31:03.366 PM CVMServer[109] Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
8/20/14 1:31:03.389 PM loginwindow[44] Login Window - Returned from Security Agent
8/20/14 1:31:03.491 PM loginwindow[44] USER_PROCESS: 44 console
8/20/14 1:31:04.084 PM WindowServer[75]    **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/20/14 1:31:06.307 PM locationd[563] NOTICE,Location icon should now be in state 0
8/20/14 1:31:06.478 PM coreaudiod[560] Enabled automatic stack shots because audio IO is inactive
8/20/14 1:31:06.621 PM UserEventAgent[548] cannot find fw daemon port 1102
8/20/14 1:31:08.530 PM WindowServer[75]    Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:31:09.707 PM NetworkBrowserAgent[591]    Starting NetworkBrowserAgent
8/20/14 1:31:10.393 PM apsd[593]   Certificate doesn't match host
8/20/14 1:31:11.499 PM com.apple.SecurityServer[15]    Session 100010 created
8/20/14 1:31:13.561 PM genatsdb[608]   ########## genatsdb Sandboxed. ##########
8/20/14 1:31:13.562 PM apsd[593]   Certificate doesn't match host
8/20/14 1:31:13.740 PM com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:31:14.555 PM apsd[593]   Certificate doesn't match host
8/20/14 1:31:45.040 PM genatsdb[608]   *GENATSDB* FontObjects generated = 1113
8/20/14 1:31:55.663 PM com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:32:20.627 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.627 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.627 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.627 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.628 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.628 PM WindowServer[75]    dict count after removing entry for window 0x2a is 0
8/20/14 1:32:20.641 PM com.apple.launchd[1]    (com.apple.quicklook.satellite.4D0B4319-944D-49A6-A515-02F31AE3C235[628]) Could not terminate job: 3: No such process
8/20/14 1:32:20.641 PM com.apple.launchd[1]    (com.apple.quicklook.satellite.4D0B4319-944D-49A6-A515-02F31AE3C235[628]) Using fallback option to terminate job...
8/20/14 1:32:20.645 PM coreservicesd[65]   SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=188
8/20/14 1:32:20.647 PM coreservicesd[65]   SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=147
8/20/14 1:32:20.647 PM coreservicesd[65]   SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=194
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.648 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.716 PM loginwindow[44] DEAD_PROCESS: 44 console
8/20/14 1:32:20.891 PM com.apple.time[548] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.929 PM WindowServer[75]    CGXGetConnectionProperty: Invalid connection 32023
8/20/14 1:32:20.930 PM coreservicesd[65]   SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=158
8/20/14 1:32:22.259 PM WindowServer[75]    CGXRestartSessionWorkspace: session workspace exited for session 256 (on console)
8/20/14 1:32:22.259 PM WindowServer[75]    Session 256 released (1 references)
8/20/14 1:32:22.259 PM WindowServer[75]    Session 256 released (0 references)
8/20/14 1:32:22.259 PM WindowServer[75]    loginwindow connection closed; closing server.
8/20/14 1:32:22.268 PM apsd[593]   CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
8/20/14 1:32:22.285 PM loginwindow[653]    Login Window Application Started
8/20/14 1:32:22.299 PM UserEventAgent[11] Captive: [UserAgentDied:139] User Agent @port=45319 Died
8/20/14 1:32:22.310 PM ARDAgent[574]   CGSGetNextEventRecord (Inline) connection 0xb903, 16384 bytes
8/20/14 1:32:22.310 PM ARDAgent[574]   CGSShutdownServerConnections: Detaching application from window server
8/20/14 1:32:22.310 PM ARDAgent[574]   CGSDisplayServerShutdown: Detaching display subsystem from window server
8/20/14 1:32:22.311 PM blued[58]   -[CBManager init] init returning self:0x7ff6a3b04990
8/20/14 1:32:22.329 PM WindowServer[654]   Server is starting up
8/20/14 1:32:22.330 PM WindowServer[654]   Session 256 retained (2 references)
8/20/14 1:32:22.330 PM WindowServer[654]   Session 256 released (1 references)
8/20/14 1:32:22.333 PM WindowServer[654]   Session 256 retained (2 references)
8/20/14 1:32:22.333 PM WindowServer[654]   init_page_flip: page flip mode is on
8/20/14 1:32:22.357 PM WindowServer[654]   mux_initialize: Couldn't find any matches
8/20/14 1:32:22.367 PM WindowServer[654]   GLCompositor enabled for tile size [256 x 256]
8/20/14 1:32:22.367 PM WindowServer[654]   CGXGLInitMipMap: mip map mode is on
8/20/14 1:32:22.424 PM WindowServer[654]   WSMachineUsesNewStyleMirroring: true
8/20/14 1:32:22.425 PM WindowServer[654]   Display 0x04280480: GL mask 0x1; bounds (0, 0)[1920 x 1080], 30 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a012, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a0120000000004280480
8/20/14 1:32:22.425 PM WindowServer[654]   Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
8/20/14 1:32:22.425 PM WindowServer[654]   Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
8/20/14 1:32:22.429 PM WindowServer[654]   Created shield window 0x4 for display 0x04280480
8/20/14 1:32:22.429 PM WindowServer[654]   Created shield window 0x5 for display 0x003f003e
8/20/14 1:32:22.429 PM WindowServer[654]   Created shield window 0x6 for display 0x003f003d
8/20/14 1:32:22.431 PM WindowServer[654]   Display 0x04280480: GL mask 0x1; bounds (0, 0)[1920 x 1080], 30 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a012, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a0120000000004280480
8/20/14 1:32:22.431 PM WindowServer[654]   Display 0x003f003e: GL mask 0x4; bounds (2944, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
8/20/14 1:32:22.431 PM WindowServer[654]   Display 0x003f003d: GL mask 0x2; bounds (2945, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
8/20/14 1:32:22.431 PM WindowServer[654]   CGXPerformInitialDisplayConfiguration
8/20/14 1:32:22.431 PM WindowServer[654]     Display 0x04280480: MappedDisplay Unit 0; Vendor 0x610 Model 0xa012 S/N 0 Dimensions 18.70 x 10.51; online enabled built-in, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
8/20/14 1:32:22.431 PM WindowServer[654]     Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
8/20/14 1:32:22.431 PM WindowServer[654]     Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2945,0)[1 x 1], Rotation 0, Resolution 1
8/20/14 1:32:22.522 PM WindowServer[654]   GLCompositor: GL renderer id 0x01022647, GL mask 0x00000007, accelerator 0x00003fab, unit 0, caps QEX|QGL|MIPMAP, vram 512 MB
8/20/14 1:32:22.527 PM WindowServer[654]   GLCompositor: GL renderer id 0x01022647, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
8/20/14 1:32:22.530 PM loginwindow[653]    **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
8/20/14 1:32:22.557 PM WindowServer[654]   Created shield window 0x7 for display 0x04280480
8/20/14 1:32:22.557 PM WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:32:22.609 PM launchctl[657] com.apple.findmymacmessenger: Already loaded
8/20/14 1:32:22.613 PM hidd[49]    CGSShutdownServerConnections: Detaching application from window server
8/20/14 1:32:22.613 PM hidd[49]    CGSDisplayServerShutdown: Detaching display subsystem from window server
8/20/14 1:32:22.621 PM com.apple.SecurityServer[15]    Session 100012 created
8/20/14 1:32:22.622 PM loginwindow[653]    Login Window Started Security Agent
8/20/14 1:32:22.666 PM com.apple.dock.extra[644]   Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
8/20/14 1:32:22.667 PM com.apple.dock.extra[644]   Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
8/20/14 1:32:22.681 PM UserEventAgent[659] cannot find useragent 1102
8/20/14 1:32:22.686 PM com.apple.dock.extra[644]   Check-in to the service com.apple.imagent.desktop.auth failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
8/20/14 1:32:22.693 PM SecurityAgent[665] MacBuddy was run = 0
8/20/14 1:32:22.695 PM com.apple.dock.extra[644]   CGSGetNextEventRecord (Inline) connection 0xc917, 16384 bytes
8/20/14 1:32:22.695 PM com.apple.dock.extra[644]   CGSShutdownServerConnections: Detaching application from window server
8/20/14 1:32:22.695 PM com.apple.dock.extra[644]   CGSReleaseShmem : Cannot release shared memory
8/20/14 1:32:22.695 PM com.apple.dock.extra[644]   CGSDisplayServerShutdown: Detaching display subsystem from window server
8/20/14 1:32:22.696 PM com.apple.dock.extra[644]   Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
8/20/14 1:32:22.696 PM com.apple.dock.extra[644]   Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
8/20/14 1:32:22.696 PM com.apple.dock.extra[644]   [Warning] Bad response from daemon for setup info
8/20/14 1:32:22.704 PM WindowServer[654]   MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04280480 device: 0x106d8d110 isBackBuffered: 1 numComp: 3 numDisp: 3
8/20/14 1:32:24.429 PM WindowServer[654]   **DMPROXY** (2) Found /System/Library/CoreServices/DMProxy'.
8/20/14 1:32:24.459 PM WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:32:24.500 PM WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:32:24.695 PM com.apple.dock.extra[644]   Our bootstrap port disappeared out from under us: 0x1507 { urefs = 32774, rights = 0x1507: dead name }
8/20/14 1:32:24.696 PM com.apple.dock.extra[644]   Bug: 12F45: libxpc.dylib + 36100 [70BC645B-6952-3264-930C-C835010CCEF9]: 0x10000003
8/20/14 1:32:24.696 PM com.apple.dock.extra[644]   [Warning] Bad response from daemon for setup info
8/20/14 1:32:40.928 PM com.apple.launchd[1]    (com.apple.dock.extra[644]) Exit timeout elapsed (20 seconds). Killing
8/20/14 1:32:40.928 PM coreservicesd[65]   SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=202
8/20/14 1:33:35.215 PM SecurityAgent[665] User info context values set for jsuny
8/20/14 1:33:35.297 PM SecurityAgent[665] Login Window login proceeding
8/20/14 1:33:36.387 PM loginwindow[653]    Login Window - Returned from Security Agent
8/20/14 1:33:36.000 PM kernel[0]   Sandbox: kcm(695) deny mach-lookup com.apple.networkd
8/20/14 1:33:36.453 PM loginwindow[653]    USER_PROCESS: 653 console
8/20/14 1:33:37.052 PM locationd[708] NOTICE,Location icon should now be in state 0
8/20/14 1:33:37.107 PM UserEventAgent[700] cannot find fw daemon port 1102
8/20/14 1:33:37.683 PM xpcd[611]   MiniLauncher[711]: registration request failed: (0x12, 0xd) process failed sandbox check
8/20/14 1:33:37.907 PM WindowServer[654]   **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
8/20/14 1:33:38.011 PM coreservicesd[65]   SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=237
8/20/14 1:33:38.114 PM WindowServer[654]   Display 0x04280480: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/20/14 1:33:38.395 PM imagent[737]    [Warning] Setting up a new messages database.
8/20/14 1:33:38.428 PM NetworkBrowserAgent[747]    Starting NetworkBrowserAgent
8/20/14 1:33:40.068 PM com.apple.time[700] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:33:40.069 PM com.apple.time[700] Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
8/20/14 1:33:43.910 PM netbiosd[89]    name servers down?
8/20/14 1:33:56.635 PM netbiosd[89]    notify name "self.mdns.disconnection" has been registered 20 times - this may be a leak
8/20/14 1:33:56.639 PM netbiosd[89]    notify name "self.mdns.disconnection" has been registered 40 times - this may be a leak
8/20/14 1:34:49.927 PM netbiosd[89]    name servers down?
8/20/14 1:35:54.977 PM netbiosd[89]    name servers down?
USER LOG:
8/20/14 1:31:03.956 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: UserName
8/20/14 1:31:03.956 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: GroupName
8/20/14 1:31:03.957 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
8/20/14 1:31:03.961 PM loginwindow[44] Connection with distnoted server was invalidated
8/20/14 1:31:04.013 PM distnoted[549] # distnote server agent absolute time: 799.097924175   civil time: Wed Aug 20 13:31:04 2014   pid: 549 uid: 1467285364 root: no
8/20/14 1:31:08.954 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[588]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
8/20/14 1:31:08.955 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[588]) Job failed to exec(3) for weird reason: 2
8/20/14 1:31:08.958 PM com.apple.launchd.peruser.1467285364[536]   (com.google.keystone.user.agent[590]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
8/20/14 1:31:08.958 PM com.apple.launchd.peruser.1467285364[536]   (com.google.keystone.user.agent[590]) Job failed to exec(3) for weird reason: 2
8/20/14 1:31:12.394 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.mrt.uiagent[578]) Exited with code: 255
8/20/14 1:31:15.132 PM SystemUIServer[557] Could not load menu extra NSBundle </System/Library/CoreServices/Menu Extras/User.menu> (loaded) for Class AppleUser
8/20/14 1:32:20.642 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.quicklook[626]) Exited: Killed: 9
8/20/14 1:32:20.647 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.mdworker.single.08000000-0000-0000-0000-000000000000[641]) Exited: Killed: 9
8/20/14 1:32:20.647 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[635]) Exited: Killed: 9
8/20/14 1:32:20.783 PM Dock[556]   could not open iterator, -43, for directory <ECDirectory: 0x7fd8ac846970> {path=/Users/jsuny/Documents/} (directory changed)
8/20/14 1:32:20.783 PM Dock[556]   problem iterating directory, -43, for directory <ECDirectory: 0x7fd8ac846970> {path=/Users/jsuny/Documents/} (directory changed)
8/20/14 1:32:22.310 PM ARDAgent[574]   HIToolbox: received notification of WindowServer event port death.
8/20/14 1:32:22.311 PM ARDAgent[574]   port matched the WindowServer port created in BindCGSToRunLoop
8/20/14 1:32:22.694 PM com.apple.dock.extra[644]   HIToolbox: received notification of WindowServer event port death.
8/20/14 1:32:22.694 PM com.apple.dock.extra[644]   port matched the WindowServer port created in BindCGSToRunLoop
8/20/14 1:33:36.504 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: UserName
8/20/14 1:33:36.504 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.gamed) Ignored this key: GroupName
8/20/14 1:33:36.505 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
8/20/14 1:33:36.517 PM loginwindow[653]    Connection with distnoted server was invalidated
8/20/14 1:33:37.429 PM MiniLauncher[711]   Skipping Setup Assistant for user 1467285364
8/20/14 1:33:37.464 PM transition[714] INFO: Not signed into MobileMe, nothing to do. Reason: 3
8/20/14 1:33:37.506 PM MiniLauncher[711]   INFO: MMAccountMgr_Private: finishedSetup called.
8/20/14 1:33:38.180 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[744]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
8/20/14 1:33:38.180 PM com.apple.launchd.peruser.1467285364[536]   (com.apple.afpstat-qfa[744]) Job failed to exec(3) for weird reason: 2
8/20/14 1:33:38.489 PM CalendarAgent[741] Could not find Meta Data for persistent Store
8/20/14 1:33:38.877 PM fontd[716] FontWorker failed to return directory info (IPC failure?) for file://localhost/Users/jsuny/Library/Fonts/
8/20/14 1:34:48.723 PM migCacheCleanup[719]    Cache cleanup: cleanup for user 1467285364 took 0.43 seconds
8/20/14 1:37:15.114 PM Dock[723]   no information back from LS about running process

Check these out:
http://images.apple.com/server/macosx/docs/UserManagementv10.5.mnl.pdf
http://clc.its.psu.edu/Labs/Mac/Resources/blastimageconfig/
 http://blog.macadmincorner.com/

Gif loader for background image

I simply want to run an animated gif while my background image loads for a slideshow.
I've searched the web and this forum for hours and can't get the various bits of code tips (ajax, jquery) to work because I'm a totaly idiot when it comes to code...i've tried cutting and pasting in many different configurations but can't get anything to work properly.
Can someone help me out to get this to work?
I have this slideshow:
http://www.piquecollaborative.com/fox.html
and want an animated gif to run during load of each page
gif is this:
http://www.piquecollaborative.com/images/loading.gif
here is my code for the page(s)
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="Matthew Fox Residence by PIQUE architecture, Peter Jahnke, Eric Meglasson" />
<meta name="keywords" content="pique llc, architecture, emerging architects, young architects, northwest, peter jahnke, eric meglasson, keith ballantyne, collective studio, collected design" />
<title>PIQUE: Fox House</title>
<style type="text/css">
.projectpage {
    font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
    color: #333;
body,td,th {
    font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
    color: #333;
    font-size: 12px;
body {
    background-image: url(images/fox-01.jpg);
    background-repeat: no-repeat;
#title {
    position:absolute;
    width:350px;
    height:65px;
    z-index:1;
    left: 10px;
    top: 10px;
#apDiv1 {
    position:absolute;
    width:108px;
    height:161px;
    z-index:2;
    top: 3px;
    left: 8px;
#apDiv2 {
    position:absolute;
    width:237px;
    height:160px;
    z-index:3;
    left: 118px;
    top: 3px;
    text-align: right;
#text {
    position:absolute;
    width:351px;
    height:194px;
    z-index:4;
    left: 10px;
    top: 90px;
    background-image: url(images/fox-01.jpg);
#project-text {
    position:absolute;
    width:355px;
    height:300px;
    z-index:5;
    top: 288px;
    text-align: justify;
    left: 13px;
#right-arrow {
    position:absolute;
    width:90px;
    height:330px;
    z-index:6;
    left: 915px;
    top: 270px;
</style>
<script type="text/javascript">
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
   if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
</script>
</head>
<body class="projectpage" onload="MM_preloadImages('images/arrow-rt-inv.png')">
<div id="title"><img src="images/fox-title.gif" width="350" height="65" /></div>
<div class="projectpage" id="text">
<div id="apDiv2">Fox House<br />
    central Oregon<br />
    single family residence<br />
    4175 sqft<br />
    2010<br />
    Timberline construction, Elemental engineering </div>
<div id="apDiv1">name:<br />
    location:<br />
    type:<br />
    size:<br />
    year:<br />
    collaborators: </div>
<img src="images/line-dot-small.png" width="361" height="5" /><br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<img src="images/line-dot-small.png" width="361" height="5" /> </div>
<div id="project-text">
<p> This home sits on a bluff overlooking rolling sagebrush meadows   in Oregon’s High Desert with views of the Cascade Mountains dominating    the western horizon. The owners, Matthew and Margherita Fox requested   an extremely durable and energy efficient home for their family. The   request for a net zero house necessitated extensive use of photovoltaic   panels, ground source heat-pumps, careful consideration of day   lighting and shading strategies, and a super-insulated structure. </p>
<p>Italian architect and childhood friend Maria Chiara Trevisan   created the original vision for the structure as a gift to the Foxes.    The three masses, originally conceived as parallelepipedo (rectangular   cubes) resting at various angles in the earth, evolved into three   shelled structures clad in stone, a loose reference to the Three   Sisters mountains which dominate the home’s view.</p>
<p>Photos by Nicole Werner, Bob Woodward, Peter Jahnke</p>
</div>
<div id="right-arrow"><a href="fox02.html"><img src="images/arrow-rt.png" alt="" name="Image1" width="48" height="48" border="0" id="Image1" onmouseover="MM_swapImage('Image1','','images/arrow-rt-inv.png',1)" onmouseout="MM_swapImgRestore()" /></a></div>
</body>
</html>
can anyone help me get a leg up on this? Sorry to be such a noob. This is not my trade and i have more respect for you all now than ever before! sorry again,

You might want to reconsider the use of absolutely positioned div's for layout purposes...
it often leads to big difficulties.http://www.apptools.com/examples/pagelayout101.php
Regarding your loading gif, try defining a container for the picture
and position your loading gif as a centered non-repeating background for container
and insert your image in the container.

I need to load for a historical period for sales order ? how to load it?

Hi all,
I need to load the data for the historical period. Say 012.2008 month data. I have deleted the set up tables and trying to reload the setup tables.
but i can find the calendar year, month nor fiscal period.
i can see only sales document number along witht the company code.
How to identify the sales document number for 012.2008 from r/3 and run the setup tables.
Pls help me on this!!
Thanks
Pooja

Hi,
You are trying to do a historical load for 2LIS_11? In that case, check the VBAK/VBAP table, and find the document ranges based on the posting date. VBAK will give you the ranges, while putting the same range in VBAP wll give you the number of item documents that would be loaded. You would be able to split the doc ranges in that case for doing parallel setups.
Alternatively if the data volume is low, do a full setup and then put the selections in the info package itself.
Regards.

This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left.

This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left of each drop down.

See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.

SimAlliance Loader for JavaCards - Question

Similar Messages

Maybe you are looking for